From mboxrd@z Thu Jan 1 00:00:00 1970 From: Udo van den Heuvel Subject: 2.6.17 on VIA SP8000 sata: via_sata timeout (cmd 0xef) Date: Sun, 25 Jun 2006 17:30:47 +0200 Message-ID: <449EAC27.2080404@xs4all.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: Received: from smtp-vbr16.xs4all.nl ([194.109.24.36]:28179 "EHLO smtp-vbr16.xs4all.nl") by vger.kernel.org with ESMTP id S1751439AbWFYPaw (ORCPT ); Sun, 25 Jun 2006 11:30:52 -0400 Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Jeff Garzik Cc: linux-ide@vger.kernel.org Hello Jeff and others, While 2.6.16.2 runs quite OK on my VIA SP8000 Epia system, 2.6.17 gives (with the same config where possible) a sata problem on bootup, it gives a via_sata timeout(cmd 0xef). (the letters were small to make the stuff not scroll off the TV) Immediately rebooting into 2.6.16.2 gives a nice clean bootup. The drive is a SAMSUNG HD160JJ. Hardware has not changed and the .config for the kernel compile was not modified except for version differences. Did I miss something? Is my hardware starting te get picky about linux kernel version numbers? Or getting defective? Any ideas? Kind regards, Udo