* 2.6.17 on VIA SP8000 sata: via_sata timeout (cmd 0xef)
@ 2006-06-25 15:30 Udo van den Heuvel
0 siblings, 0 replies; only message in thread
From: Udo van den Heuvel @ 2006-06-25 15:30 UTC (permalink / raw)
To: Jeff Garzik; +Cc: linux-ide
Hello Jeff and others,
While 2.6.16.2 runs quite OK on my VIA SP8000 Epia system, 2.6.17 gives
(with the same config where possible) a sata problem on bootup, it gives
a via_sata timeout(cmd 0xef). (the letters were small to make the stuff
not scroll off the TV)
Immediately rebooting into 2.6.16.2 gives a nice clean bootup.
The drive is a SAMSUNG HD160JJ. Hardware has not changed and the .config
for the kernel compile was not modified except for version differences.
Did I miss something? Is my hardware starting te get picky about linux
kernel version numbers? Or getting defective?
Any ideas?
Kind regards,
Udo
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-06-25 15:30 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-06-25 15:30 2.6.17 on VIA SP8000 sata: via_sata timeout (cmd 0xef) Udo van den Heuvel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).