From: Tejun Heo <htejun@gmail.com>
To: Eric Windisch <eric@grokthis.net>
Cc: linux-ide@vger.kernel.org
Subject: Re: Libata-tj-stable patch /w sil3124 and PMP... 'device or resource busy'
Date: Tue, 15 Aug 2006 21:55:26 +0900 [thread overview]
Message-ID: <44E1C43E.1020302@gmail.com> (raw)
In-Reply-To: <44E105A7.3030900@grokthis.net>
Eric Windisch wrote:
> First, I should note that I've attempted to use the latest
> libata-tj-stable patch, against 2.6.17.4 and 2.6.17.7 (it patched
> cleanly), and I've tried 2.6.18-rc3. All three have given me either the
> same, or a worse result. My controller is a sil3124, I have 5 sata
> drives, and I'm using a couple sil 3726 PMPs (to support a potential
> maximum of 12 drives with my Norco 1220 disk array).
>
> Regarding the behavior, while I can see all 5 disks, and even partition
> them (iirc, parted worked, but fdisk didn't), and see my created
> partitions, when attempting to use 'mdadm --create', I get the error:
> "Device or resource busy". mkfs.ext3 gives a similar error as well.
> The disks are not mounted or otherwise being accessed (such as via
> software raid or lvm).
Hello, Eric.
Can you post the result of 'dmesg', 'cat /proc/mounts' and 'fuser -v
/dev/sdX#'?
--
tejun
next prev parent reply other threads:[~2006-08-15 12:55 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-14 23:22 Libata-tj-stable patch /w sil3124 and PMP... 'device or resource busy' Eric Windisch
2006-08-15 12:55 ` Tejun Heo [this message]
2006-08-16 2:29 ` Eric Windisch
2006-08-27 9:35 ` Tejun Heo
2006-08-28 1:16 ` Eric Windisch
2006-08-29 2:55 ` Tejun Heo
2006-08-29 14:58 ` Eric Windisch
2006-08-29 14:57 ` Tejun Heo
2006-08-29 15:15 ` Eric Windisch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44E1C43E.1020302@gmail.com \
--to=htejun@gmail.com \
--cc=eric@grokthis.net \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).