Re: ICH4-M ACPI Error

[Tejun Heo <htejun@gmail.com>]

Lee Trager wrote:
> Hey I've been having this problem for awhile on my laptop(IBM Thinkpad
> T40) and have no been able to figure out how to fix it. It seems that
> when ever I resume my laptop from suspend(from hard drive or RAM) my
> dmesg is filled with this and I am unable to do anything that requires
> access to the hard drive.
> 
> ide: failed opcode was: unknown
> hda: task_out_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: task_out_intr: error=0x10 { SectorIdNotFound }, LBAsect=74853287,
> sector=74853287
> 
> I checked the drive with the IBM hardware analysis tools as well as the
> Hitachi Drive Fitness extended test and both say the drive is fine. What
> is strange is that according to hdparm my drive only has 72037362
> sectors while this error is on sector 74853287.
> 
> This error happens with and without wireless, DMA, and alsa. The kernel
> option in ATA/ATAPI/MFM/RLL support named IDEDISK_MULTI_MODE does not
> fix the error. I have also tested this with the mainline kernel, supend2
> sources, gentoo sources, and the Knoppix boot disc and this error
> happens on all of them. I talked to one of the suspend2 developers and
> he said that the problem is with my IDE driver not properly waking the
> drive up. Could someone please help me?
> 
> Here is some system information
> 
> Distribution: Gentoo 2006.0
> Laptop: IBM Thinkpad T40
> IDE Controller: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01)
> Harddrive: Hitachi IC25N040ATCS05-0
> Software Environment:
> GLIBC: 2.4
> GCC: 4.1.1
> Kernel: Gentoo-sources-2.6.17-r5(although I tried with a number of other
> sources as stated above)

Can you try 2.6.18-rc4?

-- 
tejun