ICH4-M ACPI Error

ICH4-M ACPI Error

[Lee Trager]

Hey I've been having this problem for awhile on my laptop(IBM Thinkpad
T40) and have no been able to figure out how to fix it. It seems that
when ever I resume my laptop from suspend(from hard drive or RAM) my
dmesg is filled with this and I am unable to do anything that requires
access to the hard drive.

ide: failed opcode was: unknown
hda: task_out_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_out_intr: error=0x10 { SectorIdNotFound }, LBAsect=74853287,
sector=74853287

I checked the drive with the IBM hardware analysis tools as well as the
Hitachi Drive Fitness extended test and both say the drive is fine. What
is strange is that according to hdparm my drive only has 72037362
sectors while this error is on sector 74853287.

This error happens with and without wireless, DMA, and alsa. The kernel
option in ATA/ATAPI/MFM/RLL support named IDEDISK_MULTI_MODE does not
fix the error. I have also tested this with the mainline kernel, supend2
sources, gentoo sources, and the Knoppix boot disc and this error
happens on all of them. I talked to one of the suspend2 developers and
he said that the problem is with my IDE driver not properly waking the
drive up. Could someone please help me?

Here is some system information

Distribution: Gentoo 2006.0
Laptop: IBM Thinkpad T40
IDE Controller: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01)
Harddrive: Hitachi IC25N040ATCS05-0
Software Environment:
GLIBC: 2.4
GCC: 4.1.1
Kernel: Gentoo-sources-2.6.17-r5(although I tried with a number of other
sources as stated above)

Thanks,


Lee

Re: ICH4-M ACPI Error

[Tejun Heo]

Lee Trager wrote:
> Hey I've been having this problem for awhile on my laptop(IBM Thinkpad
> T40) and have no been able to figure out how to fix it. It seems that
> when ever I resume my laptop from suspend(from hard drive or RAM) my
> dmesg is filled with this and I am unable to do anything that requires
> access to the hard drive.
> 
> ide: failed opcode was: unknown
> hda: task_out_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: task_out_intr: error=0x10 { SectorIdNotFound }, LBAsect=74853287,
> sector=74853287
> 
> I checked the drive with the IBM hardware analysis tools as well as the
> Hitachi Drive Fitness extended test and both say the drive is fine. What
> is strange is that according to hdparm my drive only has 72037362
> sectors while this error is on sector 74853287.
> 
> This error happens with and without wireless, DMA, and alsa. The kernel
> option in ATA/ATAPI/MFM/RLL support named IDEDISK_MULTI_MODE does not
> fix the error. I have also tested this with the mainline kernel, supend2
> sources, gentoo sources, and the Knoppix boot disc and this error
> happens on all of them. I talked to one of the suspend2 developers and
> he said that the problem is with my IDE driver not properly waking the
> drive up. Could someone please help me?
> 
> Here is some system information
> 
> Distribution: Gentoo 2006.0
> Laptop: IBM Thinkpad T40
> IDE Controller: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01)
> Harddrive: Hitachi IC25N040ATCS05-0
> Software Environment:
> GLIBC: 2.4
> GCC: 4.1.1
> Kernel: Gentoo-sources-2.6.17-r5(although I tried with a number of other
> sources as stated above)

Can you try 2.6.18-rc4?

-- 
tejun

Re: ICH4-M ACPI Error

[Tejun Heo]

[resending as reply to add linux-ide back, please don't drop cc list]

Tejun Heo wrote:
> Lee Trager wrote:
>> Tejun Heo wrote:
>>> Lee Trager wrote:
>>>> Hey I've been having this problem for awhile on my laptop(IBM Thinkpad
>>>> T40) and have no been able to figure out how to fix it. It seems that
>>>> when ever I resume my laptop from suspend(from hard drive or RAM) my
>>>> dmesg is filled with this and I am unable to do anything that requires
>>>> access to the hard drive.
>>>>
>>>> ide: failed opcode was: unknown
>>>> hda: task_out_intr: status=0x51 { DriveReady SeekComplete Error }
>>>> hda: task_out_intr: error=0x10 { SectorIdNotFound }, LBAsect=74853287,
>>>> sector=74853287
> 
> Ah... it was the IDE driver, sorry.  You can try using Alan Cox's libata 
> pata drivers patch which is included in recent -mm trees.  With the 
> patch, libata ata_piix driver can drive the controller instead of ide 
> and it has better error handling.
> 
> Be warned that the drive will come up as /dev/sda instead of /dev/hda 
> and it currently doesn't disable host protected area unlike IDE, so your 
> disk can be messed up.

-- 
tejun

Re: ICH4-M ACPI Error

[Lee Trager]

Tejun Heo wrote:
> [resending as reply to add linux-ide back, please don't drop cc list]
>
> Tejun Heo wrote:
>> Lee Trager wrote:
>>> Tejun Heo wrote:
>>>> Lee Trager wrote:
>>>>> Hey I've been having this problem for awhile on my laptop(IBM
>>>>> Thinkpad
>>>>> T40) and have no been able to figure out how to fix it. It seems that
>>>>> when ever I resume my laptop from suspend(from hard drive or RAM) my
>>>>> dmesg is filled with this and I am unable to do anything that
>>>>> requires
>>>>> access to the hard drive.
>>>>>
>>>>> ide: failed opcode was: unknown
>>>>> hda: task_out_intr: status=0x51 { DriveReady SeekComplete Error }
>>>>> hda: task_out_intr: error=0x10 { SectorIdNotFound },
>>>>> LBAsect=74853287,
>>>>> sector=74853287
>>
>> Ah... it was the IDE driver, sorry.  You can try using Alan Cox's
>> libata pata drivers patch which is included in recent -mm trees. 
>> With the patch, libata ata_piix driver can drive the controller
>> instead of ide and it has better error handling.
>>
>> Be warned that the drive will come up as /dev/sda instead of /dev/hda
>> and it currently doesn't disable host protected area unlike IDE, so
>> your disk can be messed up.
Isn't libata for SATA drivers? My drive is an IDE. Also I'm worried
about using something that could mess up my drive when this is going to
be used for school next month and I need something that can sleep as
well as reliable.

Re: ICH4-M ACPI Error

[Lee Trager]

Lee Trager wrote:
> Tejun Heo wrote:
>   
>> [resending as reply to add linux-ide back, please don't drop cc list]
>>
>> Tejun Heo wrote:
>>     
>>> Lee Trager wrote:
>>>       
>>>> Tejun Heo wrote:
>>>>         
>>>>> Lee Trager wrote:
>>>>>           
>>>>>> Hey I've been having this problem for awhile on my laptop(IBM
>>>>>> Thinkpad
>>>>>> T40) and have no been able to figure out how to fix it. It seems that
>>>>>> when ever I resume my laptop from suspend(from hard drive or RAM) my
>>>>>> dmesg is filled with this and I am unable to do anything that
>>>>>> requires
>>>>>> access to the hard drive.
>>>>>>
>>>>>> ide: failed opcode was: unknown
>>>>>> hda: task_out_intr: status=0x51 { DriveReady SeekComplete Error }
>>>>>> hda: task_out_intr: error=0x10 { SectorIdNotFound },
>>>>>> LBAsect=74853287,
>>>>>> sector=74853287
>>>>>>             
>>> Ah... it was the IDE driver, sorry.  You can try using Alan Cox's
>>> libata pata drivers patch which is included in recent -mm trees. 
>>> With the patch, libata ata_piix driver can drive the controller
>>> instead of ide and it has better error handling.
>>>
>>> Be warned that the drive will come up as /dev/sda instead of /dev/hda
>>> and it currently doesn't disable host protected area unlike IDE, so
>>> your disk can be messed up.
>>>       
> Isn't libata for SATA drivers? My drive is an IDE. Also I'm worried
> about using something that could mess up my drive when this is going to
> be used for school next month and I need something that can sleep as
> well as reliable.
>   
I read about it a little more and it seems that my controller is
supported and its maturity is listed as "No known major issues. New
issues tend to get fixed quickly." So does this mean they fixed the
issue you were talking about? I guess Ill test it tomarrow(its kina
late) and report back.
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>   

Re: ICH4-M ACPI Error

[Lee Trager]

Lee Trager wrote:
> Lee Trager wrote:
>   
>> Tejun Heo wrote:
>>   
>>     
>>> [resending as reply to add linux-ide back, please don't drop cc list]
>>>
>>> Tejun Heo wrote:
>>>     
>>>       
>>>> Lee Trager wrote:
>>>>       
>>>>         
>>>>> Tejun Heo wrote:
>>>>>         
>>>>>           
>>>>>> Lee Trager wrote:
>>>>>>           
>>>>>>             
>>>>>>> Hey I've been having this problem for awhile on my laptop(IBM
>>>>>>> Thinkpad
>>>>>>> T40) and have no been able to figure out how to fix it. It seems that
>>>>>>> when ever I resume my laptop from suspend(from hard drive or RAM) my
>>>>>>> dmesg is filled with this and I am unable to do anything that
>>>>>>> requires
>>>>>>> access to the hard drive.
>>>>>>>
>>>>>>> ide: failed opcode was: unknown
>>>>>>> hda: task_out_intr: status=0x51 { DriveReady SeekComplete Error }
>>>>>>> hda: task_out_intr: error=0x10 { SectorIdNotFound },
>>>>>>> LBAsect=74853287,
>>>>>>> sector=74853287
>>>>>>>             
>>>>>>>               
>>>> Ah... it was the IDE driver, sorry.  You can try using Alan Cox's
>>>> libata pata drivers patch which is included in recent -mm trees. 
>>>> With the patch, libata ata_piix driver can drive the controller
>>>> instead of ide and it has better error handling.
>>>>
>>>> Be warned that the drive will come up as /dev/sda instead of /dev/hda
>>>> and it currently doesn't disable host protected area unlike IDE, so
>>>> your disk can be messed up.
>>>>       
>>>>         
>> Isn't libata for SATA drivers? My drive is an IDE. Also I'm worried
>> about using something that could mess up my drive when this is going to
>> be used for school next month and I need something that can sleep as
>> well as reliable.
>>   
>>     
> I read about it a little more and it seems that my controller is
> supported and its maturity is listed as "No known major issues. New
> issues tend to get fixed quickly." So does this mean they fixed the
> issue you were talking about? I guess Ill test it tomarrow(its kina
> late) and report back.
>   
>
> I tried the mm sources and as soon as I boot into it I get "atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly" It seems that they dont have a patch for just libata for any recent kerenls(the latest patch ive found is 2.6.17-rc4-git2). I could try that but id rather but on a recent, and for normal use, stable kernel. 
>   

Re: ICH4-M ACPI Error

[Lee Trager]

Lee Trager wrote:
> Lee Trager wrote:
>   
>> Lee Trager wrote:
>>   
>>     
>>> Tejun Heo wrote:
>>>   
>>>     
>>>       
>>>> [resending as reply to add linux-ide back, please don't drop cc list]
>>>>
>>>> Tejun Heo wrote:
>>>>     
>>>>       
>>>>         
>>>>> Lee Trager wrote:
>>>>>       
>>>>>         
>>>>>           
>>>>>> Tejun Heo wrote:
>>>>>>         
>>>>>>           
>>>>>>             
>>>>>>> Lee Trager wrote:
>>>>>>>           
>>>>>>>             
>>>>>>>               
>>>>>>>> Hey I've been having this problem for awhile on my laptop(IBM
>>>>>>>> Thinkpad
>>>>>>>> T40) and have no been able to figure out how to fix it. It seems that
>>>>>>>> when ever I resume my laptop from suspend(from hard drive or RAM) my
>>>>>>>> dmesg is filled with this and I am unable to do anything that
>>>>>>>> requires
>>>>>>>> access to the hard drive.
>>>>>>>>
>>>>>>>> ide: failed opcode was: unknown
>>>>>>>> hda: task_out_intr: status=0x51 { DriveReady SeekComplete Error }
>>>>>>>> hda: task_out_intr: error=0x10 { SectorIdNotFound },
>>>>>>>> LBAsect=74853287,
>>>>>>>> sector=74853287
>>>>>>>>             
>>>>>>>>               
>>>>>>>>                 
>>>>> Ah... it was the IDE driver, sorry.  You can try using Alan Cox's
>>>>> libata pata drivers patch which is included in recent -mm trees. 
>>>>> With the patch, libata ata_piix driver can drive the controller
>>>>> instead of ide and it has better error handling.
>>>>>
>>>>> Be warned that the drive will come up as /dev/sda instead of /dev/hda
>>>>> and it currently doesn't disable host protected area unlike IDE, so
>>>>> your disk can be messed up.
>>>>>       
>>>>>         
>>>>>           
>>> Isn't libata for SATA drivers? My drive is an IDE. Also I'm worried
>>> about using something that could mess up my drive when this is going to
>>> be used for school next month and I need something that can sleep as
>>> well as reliable.
>>>   
>>>     
>>>       
>> I read about it a little more and it seems that my controller is
>> supported and its maturity is listed as "No known major issues. New
>> issues tend to get fixed quickly." So does this mean they fixed the
>> issue you were talking about? I guess Ill test it tomarrow(its kina
>> late) and report back.
>>   
>>
>> I tried the mm sources and as soon as I boot into it I get "atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly" It seems that they dont have a patch for just libata for any recent kerenls(the latest patch ive found is 2.6.17-rc4-git2). I could try that but id rather but on a recent, and for normal use, stable kernel. 
>>   
>>     
> I filed a bug about this a few weeks ago and no kernel developer has said anything but it seems that people with other chipsets have a similar problem. You can look at the bug here. http://bugzilla.kernel.org/show_bug.cgi?id=6840
>   

Re: ICH4-M ACPI Error

[Lee Trager]

Tejun Heo wrote:
> Lee Trager wrote:
>> Hey I've been having this problem for awhile on my laptop(IBM Thinkpad
>> T40) and have no been able to figure out how to fix it. It seems that
>> when ever I resume my laptop from suspend(from hard drive or RAM) my
>> dmesg is filled with this and I am unable to do anything that requires
>> access to the hard drive.
>>
>> ide: failed opcode was: unknown
>> hda: task_out_intr: status=0x51 { DriveReady SeekComplete Error }
>> hda: task_out_intr: error=0x10 { SectorIdNotFound }, LBAsect=74853287,
>> sector=74853287
>>
>> I checked the drive with the IBM hardware analysis tools as well as the
>> Hitachi Drive Fitness extended test and both say the drive is fine. What
>> is strange is that according to hdparm my drive only has 72037362
>> sectors while this error is on sector 74853287.
>>
>> This error happens with and without wireless, DMA, and alsa. The kernel
>> option in ATA/ATAPI/MFM/RLL support named IDEDISK_MULTI_MODE does not
>> fix the error. I have also tested this with the mainline kernel, supend2
>> sources, gentoo sources, and the Knoppix boot disc and this error
>> happens on all of them. I talked to one of the suspend2 developers and
>> he said that the problem is with my IDE driver not properly waking the
>> drive up. Could someone please help me?
>>
>> Here is some system information
>>
>> Distribution: Gentoo 2006.0
>> Laptop: IBM Thinkpad T40
>> IDE Controller: Intel Corporation 82801DBM (ICH4-M) IDE Controller
>> (rev 01)
>> Harddrive: Hitachi IC25N040ATCS05-0
>> Software Environment:
>> GLIBC: 2.4
>> GCC: 4.1.1
>> Kernel: Gentoo-sources-2.6.17-r5(although I tried with a number of other
>> sources as stated above)
>
> Can you try 2.6.18-rc4?
>
Nope, same thing in 2.6.18-rc4.