Re: ICH4-M ACPI Error

[Lee Trager <Lee@PicturesInMotion.net>]

Tejun Heo wrote:
> Lee Trager wrote:
>> Hey I've been having this problem for awhile on my laptop(IBM Thinkpad
>> T40) and have no been able to figure out how to fix it. It seems that
>> when ever I resume my laptop from suspend(from hard drive or RAM) my
>> dmesg is filled with this and I am unable to do anything that requires
>> access to the hard drive.
>>
>> ide: failed opcode was: unknown
>> hda: task_out_intr: status=0x51 { DriveReady SeekComplete Error }
>> hda: task_out_intr: error=0x10 { SectorIdNotFound }, LBAsect=74853287,
>> sector=74853287
>>
>> I checked the drive with the IBM hardware analysis tools as well as the
>> Hitachi Drive Fitness extended test and both say the drive is fine. What
>> is strange is that according to hdparm my drive only has 72037362
>> sectors while this error is on sector 74853287.
>>
>> This error happens with and without wireless, DMA, and alsa. The kernel
>> option in ATA/ATAPI/MFM/RLL support named IDEDISK_MULTI_MODE does not
>> fix the error. I have also tested this with the mainline kernel, supend2
>> sources, gentoo sources, and the Knoppix boot disc and this error
>> happens on all of them. I talked to one of the suspend2 developers and
>> he said that the problem is with my IDE driver not properly waking the
>> drive up. Could someone please help me?
>>
>> Here is some system information
>>
>> Distribution: Gentoo 2006.0
>> Laptop: IBM Thinkpad T40
>> IDE Controller: Intel Corporation 82801DBM (ICH4-M) IDE Controller
>> (rev 01)
>> Harddrive: Hitachi IC25N040ATCS05-0
>> Software Environment:
>> GLIBC: 2.4
>> GCC: 4.1.1
>> Kernel: Gentoo-sources-2.6.17-r5(although I tried with a number of other
>> sources as stated above)
>
> Can you try 2.6.18-rc4?
>
Nope, same thing in 2.6.18-rc4.