From: Lee Trager <Lee@PicturesInMotion.net>
To: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: linux-ide@vger.kernel.org, Alan Cox <alan@lxorguk.ukuu.org.uk>
Subject: Re: [PATCH] ide: Reinitilize idedisk_capacity for HPA drives on resume
Date: Mon, 21 Aug 2006 17:18:36 -0400 [thread overview]
Message-ID: <44EA232C.30907@PicturesInMotion.net> (raw)
In-Reply-To: <44E9E05B.4030502@ru.mvista.com>
[-- Attachment #1: Type: text/plain, Size: 1714 bytes --]
Sergei Shtylyov wrote:
> Hello.
>
> Lee Trager wrote:
>
>> This patch fixes a problem that when a computer with HPA on it's hard
>> drive comes out of sleep mode it needs the disks capacity reinitialized.
>
>> This is my first patch to the Linux kernel so if I did anything wrong
>> please be gentle ;)
>
> Your mailer spoils tabs, so either attach your patch or use the
> different
> mailer.
>
> [...]
>
>> diff -Naur linux-2.6.18-rc4-old/drivers/ide/ide.c
>> linux-2.6.18-rc4/drivers/ide/ide.c
>> --- linux-2.6.18-rc4-old/drivers/ide/ide.c 2006-08-19
>> 03:49:03.000000000 -0400
>> +++ linux-2.6.18-rc4/drivers/ide/ide.c 2006-08-20 19:12:38.000000000
>> -0400
>> @@ -1232,6 +1232,7 @@
>> struct request rq;
>> struct request_pm_state rqpm;
>> ide_task_t args;
>> + int ide_cmd;
>>
>> memset(&rq, 0, sizeof(rq));
>> memset(&rqpm, 0, sizeof(rqpm));
>> @@ -1242,7 +1243,15 @@
>> rqpm.pm_step = ide_pm_state_start_resume;
>> rqpm.pm_state = PM_EVENT_ON;
>>
>> - return ide_do_drive_cmd(drive, &rq, ide_head_wait);
>> + ide_cmd = ide_do_drive_cmd(drive, &rq, ide_head_wait);
>> +
>> + /* check to see if this is a hard drive
>> + * if it is then checkhpa needs to be
>> + * disabled */
>> + if(drive->media == ide_disk && idedisk_supports_hpa(drive->id))
>> + init_idedisk_capacity(drive);
>> +
>> + return ide_cmd;
>> }
>
> Hm, shouldn't this be handled as a separate resume process step?
>
> MBR, Sergei
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Ok I attached it now.
[-- Attachment #2: hpa-resume.patch --]
[-- Type: text/plain, Size: 2937 bytes --]
diff -Naur linux-2.6.18-rc4-old/include/linux/ide.h linux-2.6.18-rc4/include/linux/ide.h
--- linux-2.6.18-rc4-old/include/linux/ide.h 2006-08-19 03:49:03.000000000 -0400
+++ linux-2.6.18-rc4/include/linux/ide.h 2006-08-20 19:13:10.000000000 -0400
@@ -1201,6 +1201,17 @@
void ide_register_subdriver(ide_drive_t *, ide_driver_t *);
void ide_unregister_subdriver(ide_drive_t *, ide_driver_t *);
+/* Bits 10 of command_set_1 and cfs_enable_1 must be equal,
+ * so on non-buggy drives we need test only one.
+ * However, we should also check whether these fields are valid.
+*/
+static inline int idedisk_supports_hpa(const struct hd_driveid *id)
+{
+ return (id->command_set_1 & 0x0400) && (id->cfs_enable_1 & 0x0400);
+}
+
+extern void init_idedisk_capacity (ide_drive_t *drive);
+
#define ON_BOARD 1
#define NEVER_BOARD 0
diff -Naur linux-2.6.18-rc4-old/drivers/ide/ide-disk.c linux-2.6.18-rc4/drivers/ide/ide-disk.c
--- linux-2.6.18-rc4-old/drivers/ide/ide-disk.c 2006-08-19 03:49:03.000000000 -0400
+++ linux-2.6.18-rc4/drivers/ide/ide-disk.c 2006-08-20 19:13:56.000000000 -0400
@@ -464,16 +464,6 @@
}
/*
- * Bits 10 of command_set_1 and cfs_enable_1 must be equal,
- * so on non-buggy drives we need test only one.
- * However, we should also check whether these fields are valid.
- */
-static inline int idedisk_supports_hpa(const struct hd_driveid *id)
-{
- return (id->command_set_1 & 0x0400) && (id->cfs_enable_1 & 0x0400);
-}
-
-/*
* The same here.
*/
static inline int idedisk_supports_lba48(const struct hd_driveid *id)
@@ -528,7 +518,7 @@
* in above order (i.e., if value of higher priority is available,
* reset will be ignored).
*/
-static void init_idedisk_capacity (ide_drive_t *drive)
+void init_idedisk_capacity (ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
/*
@@ -555,6 +545,8 @@
}
}
+EXPORT_SYMBOL(init_idedisk_capacity);
+
static sector_t idedisk_capacity (ide_drive_t *drive)
{
return drive->capacity64 - drive->sect0;
diff -Naur linux-2.6.18-rc4-old/drivers/ide/ide.c linux-2.6.18-rc4/drivers/ide/ide.c
--- linux-2.6.18-rc4-old/drivers/ide/ide.c 2006-08-19 03:49:03.000000000 -0400
+++ linux-2.6.18-rc4/drivers/ide/ide.c 2006-08-20 19:12:38.000000000 -0400
@@ -1232,6 +1232,7 @@
struct request rq;
struct request_pm_state rqpm;
ide_task_t args;
+ int ide_cmd;
memset(&rq, 0, sizeof(rq));
memset(&rqpm, 0, sizeof(rqpm));
@@ -1242,7 +1243,15 @@
rqpm.pm_step = ide_pm_state_start_resume;
rqpm.pm_state = PM_EVENT_ON;
- return ide_do_drive_cmd(drive, &rq, ide_head_wait);
+ ide_cmd = ide_do_drive_cmd(drive, &rq, ide_head_wait);
+
+ /* check to see if this is a hard drive
+ * if it is then checkhpa needs to be
+ * disabled */
+ if(drive->media == ide_disk && idedisk_supports_hpa(drive->id))
+ init_idedisk_capacity(drive);
+
+ return ide_cmd;
}
int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device *bdev,
next prev parent reply other threads:[~2006-08-21 21:19 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-21 0:51 [PATCH] ide: Reinitilize idedisk_capacity for HPA drives on resume Lee Trager
2006-08-21 16:33 ` Sergei Shtylyov
2006-08-21 21:18 ` Lee Trager [this message]
2006-08-21 23:15 ` Lee Trager
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44EA232C.30907@PicturesInMotion.net \
--to=lee@picturesinmotion.net \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-ide@vger.kernel.org \
--cc=sshtylyov@ru.mvista.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).