From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ric Wheeler Subject: faulty disk testing Date: Mon, 04 Sep 2006 21:30:16 -0400 Message-ID: <44FCD328.3020800@emc.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------010607070103030305000903" Return-path: Received: from mexforward.lss.emc.com ([128.222.32.20]:37573 "EHLO mexforward.lss.emc.com") by vger.kernel.org with ESMTP id S1751511AbWIEBcY (ORCPT ); Mon, 4 Sep 2006 21:32:24 -0400 Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Tejun Heo , Linux-ide Cc: Mark Lord This is a multi-part message in MIME format. --------------010607070103030305000903 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hi Tejun, We have been trying to inject some errors on some drives & validate that the new error handling kicks out drives. Using 2.6.18rc3 on a box with 4 drives - 3 good & one with an artificially created ecc error in the 4-way MD RAID1 partition. The error handling worked through the various transitions, but did not give up on the drive well enough to let the boot continue using the other 3. I plan to look at the state of the drive with an analyzer tomorrow to make sure that the drive is not holding the bus or something & try your latest "new init" git tree code. What it looks like is a soft hang - maybe the box is stuck in ata_port_wait_eh() which never seems to timeout on a bus that does not recover? Attached is the console log, ric --------------010607070103030305000903 Content-Type: text/plain; name="2-6-18-rc3.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="2-6-18-rc3.txt" Linux version 2.6.18-rc3 (ric@SLES10) (gcc version 4.1.0 (SUSE Linux)) #2 SMP Fri Sep 1 11:11:24 EDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f6e0000 (usable) BIOS-e820: 000000003f6e0000 - 000000003f6e3000 (ACPI NVS) BIOS-e820: 000000003f6e3000 - 000000003f6f0000 (ACPI data) BIOS-e820: 000000003f6f0000 - 000000003f700000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 118MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f4c30 DMI 2.2 present. ACPI: PM-Timer IO Port: 0x408 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:3 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:3 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 3f700000:a0900000) Detected 2800.219 MHz processor. Built 1 zonelists. Total pages: 259808 Kernel command line: root=/dev/md3 BOOT_IMAGE=production-m elevator=as console=tty0 console=ttyS0,115200n8 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1026444k/1039232k available (2029k kernel code, 12164k reserved, 662k data, 200k init, 121728k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5605.26 BogoMIPS (lpj=11210526) Mount-cache hash table entries: 512 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. Freeing SMP alternatives: 16k freed ACPI: Core revision 20060707 CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 04 Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5600.66 BogoMIPS (lpj=11201324) monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 04 Total of 2 processors activated (11205.92 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=104 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 9 10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 12 14 15) SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:01:00.0 IO window: c000-cfff MEM window: d0000000-d00fffff PREFETCH window: disabled. PCI: Bridge: 0000:01:00.2 IO window: d000-dfff MEM window: d0100000-d01fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:01.0 IO window: c000-dfff MEM window: d0000000-d02fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered IA-32 Microcode Update Driver: v1.14a highmem bounce pool size: 64 pages io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered assign_interrupt_mode Found MSI capability Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 19 (level, low) -> IRQ 17 e1000: 0000:02:06.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:e0:81:65:62:50 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 18 (level, low) -> IRQ 18 e1000: 0000:02:06.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:e0:81:65:62:51 e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 17 (level, low) -> IRQ 19 e1000: 0000:03:07.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:e0:81:65:62:52 e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:03:07.1[B] -> GSI 16 (level, low) -> IRQ 16 e1000: 0000:03:07.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:e0:81:65:62:53 e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17 ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl IDE mode ahci 0000:00:1f.2: flags: 64bit ncq pm led ata1: SATA max UDMA/133 cmd 0xF8802100 ctl 0x0 bmdma 0x0 irq 17 ata2: SATA max UDMA/133 cmd 0xF8802180 ctl 0x0 bmdma 0x0 irq 17 ata3: SATA max UDMA/133 cmd 0xF8802200 ctl 0x0 bmdma 0x0 irq 17 ata4: SATA max UDMA/133 cmd 0xF8802280 ctl 0x0 bmdma 0x0 irq 17 scsi0 : ahci ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 31/32) ata1.00: ata1: dev 0 multi count 0 ata1.00: configured for UDMA/133 scsi1 : ahci ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 31/32) ata2.00: ata2: dev 0 multi count 0 ata2.00: configured for UDMA/133 scsi2 : ahci ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 31/32) ata3.00: ata3: dev 0 multi count 0 ata3.00: configured for UDMA/133 scsi3 : ahci ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 31/32) ata4.00: ata4: dev 0 multi count 0 ata4.00: configured for UDMA/133 Vendor: ATA Model: Maxtor 7B320S0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 7B320S0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 7B320S0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 7B320S0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) sda: Write Protect is off SCSI device sda: drive cache: write through SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB) sda: Write Protect is off SCSI device sda: drive cache: write through sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 > sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 > sd 1:0:0:0: Attached scsi disk sdb SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB) sdc: Write Protect is off SCSI device sdc: drive cache: write through SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB) sdc: Write Protect is off SCSI device sdc: drive cache: write through sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 sdc11 sdc12 sdc13 sdc14 > sd 2:0:0:0: Attached scsi disk sdc SCSI device sdd: 625142448 512-byte hdwr sectors (320073 MB) sdd: Write Protect is off SCSI device sdd: drive cache: write through SCSI device sdd: 625142448 512-byte hdwr sectors (320073 MB) sdd: Write Protect is off SCSI device sdd: drive cache: write through sdd: sdd1 sdd2 sdd3 sdd4 < sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13 sdd14 > sd 3:0:0:0: Attached scsi disk sdd serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice i2c /dev entries driver md: raid1 personality registered for level 1 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered NET: Registered protocol family 1 Starting balanced_irq Using IPI Shortcut mode md: Autodetecting RAID arrays. Time: tsc clocksource has been installed. input: AT Translated Set 2 keyboard as /class/input/input0 ata2: failed to read log page 10h (errno=-2) ata2.00: exception Emask 0x1 SAct 0x1 SErr 0x0 action 0x0 ata2.00: (irq_stat 0x40000008) ata2.00: tag 0 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through ata2: failed to read log page 10h (errno=-2) ata2.00: exception Emask 0x1 SAct 0x1 SErr 0x0 action 0x0 ata2.00: (irq_stat 0x40000008) ata2.00: tag 0 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through ata2: failed to read log page 10h (errno=-2) ata2.00: exception Emask 0x1 SAct 0x1 SErr 0x0 action 0x0 ata2.00: (irq_stat 0x40000008) ata2.00: tag 0 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through ata2: failed to read log page 10h (errno=-2) ata2.00: exception Emask 0x1 SAct 0x1 SErr 0x0 action 0x0 ata2.00: (irq_stat 0x40000008) ata2.00: tag 0 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through ata2: failed to read log page 10h (errno=-2) ata2.00: exception Emask 0x1 SAct 0x1 SErr 0x0 action 0x0 ata2.00: (irq_stat 0x40000008) ata2.00: tag 0 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through ata2: failed to read log page 10h (errno=-2) ata2.00: exception Emask 0x1 SAct 0x1 SErr 0x0 action 0x0 ata2.00: (irq_stat 0x40000008) ata2.00: tag 0 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) sd 1:0:0:0: SCSI error: return code = 0x08000002 sdb: Current: sense key: Aborted Command Additional sense: No additional sense information end_request: I/O error, dev sdb, sector 272900 md: disabled device sdb3, could not read superblock. ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through md: sdb3 has invalid sb, not importing! md: autorun ... md: considering sdd8 ... md: adding sdd8 ... md: sdd7 has different UUID to sdd8 md: sdd6 has different UUID to sdd8 md: sdd5 has different UUID to sdd8 md: sdd3 has different UUID to sdd8 md: adding sdc8 ... md: sdc7 has different UUID to sdd8 md: sdc6 has different UUID to sdd8 md: sdc5 has different UUID to sdd8 md: sdc3 has different UUID to sdd8 md: sdb8 has different UUID to sdd8 md: sdb7 has different UUID to sdd8 md: sdb6 has different UUID to sdd8 md: sdb5 has different UUID to sdd8 md: adding sda8 ... md: sda7 has different UUID to sdd8 md: sda6 has different UUID to sdd8 md: sda5 has different UUID to sdd8 md: sda3 has different UUID to sdd8 md: created md8 md: bind md: bind md: bind md: running: raid1: raid set md8 active with 3 out of 4 mirrors md: considering sdd7 ... md: adding sdd7 ... md: sdd6 has different UUID to sdd7 md: sdd5 has different UUID to sdd7 md: sdd3 has different UUID to sdd7 md: adding sdc7 ... md: sdc6 has different UUID to sdd7 md: sdc5 has different UUID to sdd7 md: sdc3 has different UUID to sdd7 md: sdb8 has different UUID to sdd7 md: sdb7 has different UUID to sdd7 md: sdb6 has different UUID to sdd7 md: sdb5 has different UUID to sdd7 md: adding sda7 ... md: sda6 has different UUID to sdd7 md: sda5 has different UUID to sdd7 md: sda3 has different UUID to sdd7 md: created md7 md: bind md: bind md: bind md: running: raid1: raid set md7 active with 3 out of 4 mirrors md: considering sdd6 ... md: adding sdd6 ... md: sdd5 has different UUID to sdd6 md: sdd3 has different UUID to sdd6 md: adding sdc6 ... md: sdc5 has different UUID to sdd6 md: sdc3 has different UUID to sdd6 md: sdb8 has different UUID to sdd6 md: sdb7 has different UUID to sdd6 md: sdb6 has different UUID to sdd6 md: sdb5 has different UUID to sdd6 md: adding sda6 ... md: sda5 has different UUID to sdd6 md: sda3 has different UUID to sdd6 md: created md6 md: bind md: bind md: bind md: running: raid1: raid set md6 active with 3 out of 4 mirrors md: considering sdd5 ... md: adding sdd5 ... md: sdd3 has different UUID to sdd5 md: adding sdc5 ... md: sdc3 has different UUID to sdd5 md: sdb8 has different UUID to sdd5 md: sdb7 has different UUID to sdd5 md: sdb6 has different UUID to sdd5 md: sdb5 has different UUID to sdd5 md: adding sda5 ... md: sda3 has different UUID to sdd5 md: created md5 md: bind md: bind md: bind md: running: raid1: raid set md5 active with 3 out of 4 mirrors md: considering sdd3 ... md: adding sdd3 ... md: adding sdc3 ... md: sdb8 has different UUID to sdd3 md: sdb7 has different UUID to sdd3 md: sdb6 has different UUID to sdd3 md: sdb5 has different UUID to sdd3 md: adding sda3 ... md: created md3 md: bind md: bind md: bind md: running: raid1: raid set md3 active with 3 out of 4 mirrors md: considering sdb8 ... md: adding sdb8 ... md: sdb7 has different UUID to sdb8 md: sdb6 has different UUID to sdb8 md: sdb5 has different UUID to sdb8 md: md8 already running, cannot run sdb8 md: export_rdev(sdb8) md: considering sdb7 ... md: adding sdb7 ... md: sdb6 has different UUID to sdb7 md: sdb5 has different UUID to sdb7 md: md7 already running, cannot run sdb7 md: export_rdev(sdb7) md: considering sdb6 ... md: adding sdb6 ... md: sdb5 has different UUID to sdb6 md: md6 already running, cannot run sdb6 md: export_rdev(sdb6) md: considering sdb5 ... md: adding sdb5 ... md: md5 already running, cannot run sdb5 md: export_rdev(sdb5) md: ... autorun DONE. ReiserFS: md3: found reiserfs format "3.6" with standard journal ReiserFS: md3: using ordered data mode ReiserFS: md3: journal params: device md3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: md3: checking transaction log (md3) ReiserFS: md3: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 200k freed INIT: version 2.86 booting System Boot Control: Running /etc/init.d/boot Mounting procfs at /procdone Mounting sysfs at /sysdone Mounting debugfs at /sys/kernel/debugdone Mounting tmpfs at /devdone Initializing /devdone Mounting devpts at /dev/ptsdone showconsole: Warning: the ioctl TIOCGDEV is not known by the kernel /bin/mknod -m600 /dev/shm/root b 9 3 Checking root file system... fsck 1.34 (25-Jul-2003) [/sbin/fsck.reiserfs (1) -- /dev/shm/root] fsck.reiserfs -a /dev/shm/root Reiserfs super block in block 16 on 0x903 of format 3.6 with standard journal Blocks (total/free): 26080/6435 by 4096 bytes Filesystem is clean Filesystem seems mounted read-only. Skipping journal replay. Checking internal tree..finished doneLoading NEI modulesFATAL: Module neismbus not found. failed Starting NEI servicedone Starting udevd ata2: failed to read log page 10h (errno=-2) ata2.00: exception Emask 0x1 SAct 0xc SErr 0x0 action 0x0 ata2.00: (irq_stat 0x40000008) ata2.00: tag 2 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2.00: tag 3 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through ata2: failed to read log page 10h (errno=-2) ata2.00: exception Emask 0x1 SAct 0x3 SErr 0x0 action 0x0 ata2.00: (irq_stat 0x40000008) ata2.00: tag 0 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2.00: tag 1 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through ata2: failed to read log page 10h (errno=-2) ata2.00: exception Emask 0x1 SAct 0x3 SErr 0x0 action 0x0 ata2.00: (irq_stat 0x40000008) ata2.00: tag 0 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2.00: tag 1 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through ata2: failed to read log page 10h (errno=-2) ata2.00: exception Emask 0x1 SAct 0x3 SErr 0x0 action 0x0 ata2.00: (irq_stat 0x40000008) ata2.00: tag 0 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2.00: tag 1 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through ata2: failed to read log page 10h (errno=-2) ata2.00: limiting speed to UDMA/100 ata2.00: exception Emask 0x1 SAct 0x3 SErr 0x0 action 0x2 ata2.00: (irq_stat 0x40000008) ata2.00: tag 0 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2.00: tag 1 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2: soft resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for UDMA/100 ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through ata2: failed to read log page 10h (errno=-2) ata2.00: limiting speed to UDMA/66 ata2.00: exception Emask 0x1 SAct 0x7 SErr 0x0 action 0x2 ata2.00: (irq_stat 0x40000008) ata2.00: tag 0 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2.00: tag 1 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2.00: tag 2 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2: soft resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for UDMA/66 sd 1:0:0:0: SCSI error: return code = 0x08000002 sdb: Current: sense key: Aborted Command Additional sense: No additional sense information end_request: I/O error, dev sdb, sector 272900 Buffer I/O error on device sdb3, logical block 208640 Buffer I/O error on device sdb3, logical block 208641 Buffer I/O error on device sdb3, logical block 208642 Buffer I/O error on device sdb3, logical block 208643 Buffer I/O error on device sdb3, logical block 208644 Buffer I/O error on device sdb3, logical block 208645 Buffer I/O error on device sdb3, logical block 208646 Buffer I/O error on device sdb3, logical block 208647 ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through ata2: failed to read log page 10h (errno=-2) ata2.00: limiting speed to UDMA/44 ata2.00: exception Emask 0x1 SAct 0x3 SErr 0x0 action 0x2 ata2.00: (irq_stat 0x40000008) ata2.00: tag 0 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2.00: tag 1 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2: soft resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for UDMA/44 ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through ata2: failed to read log page 10h (errno=-2) ata2.00: limiting speed to UDMA/33 ata2.00: exception Emask 0x1 SAct 0x1e SErr 0x0 action 0x2 ata2.00: (irq_stat 0x40000008) ata2.00: tag 1 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2.00: tag 2 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2.00: tag 3 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2.00: tag 4 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2: soft resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for UDMA/33 ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through ata2: failed to read log page 10h (errno=-2) ata2.00: limiting speed to UDMA/25 ata2.00: exception Emask 0x1 SAct 0xa SErr 0x0 action 0x2 ata2.00: (irq_stat 0x40000008) ata2.00: tag 1 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2.00: tag 3 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2: soft resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for UDMA/25 ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through ata2: failed to read log page 10h (errno=-2) ata2.00: limiting speed to UDMA/16 ata2.00: exception Emask 0x1 SAct 0x3 SErr 0x0 action 0x2 ata2.00: (irq_stat 0x40000008) ata2.00: tag 0 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2.00: tag 1 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2: soft resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for UDMA/16 ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off SCSI device sdb: drive cache: write through ata2: failed to read log page 10h (errno=-2) ata2.00: limiting speed to PIO4 ata2.00: exception Emask 0x1 SAct 0x3 SErr 0x0 action 0x2 ata2.00: (irq_stat 0x40000008) ata2.00: tag 0 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2.00: tag 1 cmd 0x60 Emask 0x1 stat 0x40 err 0x0 (device error) ata2: soft resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO4 ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: (irq_stat 0x40000001) ata2.00: tag 0 cmd 0x20 Emask 0x9 stat 0x51 err 0x40 (media error) sd 1:0:0:0: SCSI error: return code = 0x08000002 sdb: Current: sense key: Medium Error Additional sense: Unrecovered read error - auto reallocate failed end_request: I/O error, dev sdb, sector 272900 Buffer I/O error on device sdb3, logical block 208640 Buffer I/O error on device sdb3, logical block 208641 Buffer I/O error on device sdb3, logical block 208642 Buffer I/O error on device sdb3, logical block 208643 Buffer I/O error on device sdb3, logical block 208644 Buffer I/O error on device sdb3, logical block 208645 Buffer I/O error on device sdb3, logical block 208646 Buffer I/O error on device sdb3, logical block 208647 ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port done e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation ipmi message handler version 39.0 ipmi device interface IPMI System Interface driver. ipmi: Found new BMC (man_id: 0x0019fd, prod_id: 0x1426, dev_id: 0x00) IPMI KCS interface initialized ipmi_si: Found default KCS state machine at I/O address 0xca2 Loading required kernel modules doneStarting MD Raid ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO4 ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO4 ata2: EH complete sdb: Write Protect is off ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO4 ata2: EH complete ata2.00: limiting speed to PIO3 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO3 ata2: EH complete SCSI device sdb: drive cache: write through ata2.00: limiting speed to PIO2 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO2 sd 1:0:0:0: SCSI error: return code = 0x08000002 sdb: Current: sense key: Aborted Command Additional sense: No additional sense information end_request: I/O error, dev sdb, sector 625073067 Buffer I/O error on device sdb14, logical block 61970728 Buffer I/O error on device sdb14, logical block 61970729 Buffer I/O error on device sdb14, logical block 61970730 Buffer I/O error on device sdb14, logical block 61970731 ata2: EH complete ata2.00: limiting speed to PIO1 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO1 ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) ata2.00: limiting speed to PIO0 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete sdb: Write Protect is off ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard reset ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete SCSI device sdb: drive cache: write through ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 sd 1:0:0:0: SCSI error: return code = 0x08000002 sdb: Current: sense key: Aborted Command Additional sense: No additional sense information end_request: I/O error, dev sdb, sector 377189877 Buffer I/O error on device sdb12, logical block 61970608 Buffer I/O error on device sdb12, logical block 61970609 Buffer I/O error on device sdb12, logical block 61970610 Buffer I/O error on device sdb12, logical block 61970611 ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete sdb: Write Protect is off ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete SCSI device sdb: drive cache: write through ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 sd 1:0:0:0: SCSI error: return code = 0x08000002 sdb: Current: sense key: Aborted Command Additional sense: No additional sense information end_request: I/O error, dev sdb, sector 253248402 Buffer I/O error on device sdb11, logical block 61970608 Buffer I/O error on device sdb11, logical block 61970609 Buffer I/O error on device sdb11, logical block 61970610 Buffer I/O error on device sdb11, logical block 61970611 ata2: EH complete sdb: Write Protect is off ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete SCSI device sdb: drive cache: write through ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete sdb: Write Protect is off ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 sd 1:0:0:0: SCSI error: return code = 0x08000002 sdb: Current: sense key: Aborted Command Additional sense: No additional sense information end_request: I/O error, dev sdb, sector 377190136 Buffer I/O error on device sdb13, logical block 0 Buffer I/O error on device sdb13, logical block 1 Buffer I/O error on device sdb13, logical block 2 Buffer I/O error on device sdb13, logical block 3 ata2: EH complete ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete SCSI device sdb: drive cache: write through ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete sdb: Write Protect is off ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 sd 1:0:0:0: SCSI error: return code = 0x08000002 sdb: Current: sense key: Aborted Command Additional sense: No additional sense information end_request: I/O error, dev sdb, sector 5365450 Buffer I/O error on device sdb9, logical block 501966 Buffer I/O error on device sdb9, logical block 501967 ata2: EH complete SCSI device sdb: drive cache: write through ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete sdb: Write Protect is off ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete SCSI device sdb: drive cache: write through ata2.00: speed dbut no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 sd 1:0:0:0: SCSI error: return code = 0x08000002 sdb: Current: sense key: Aborted Command Additional sense: No additional sense information end_request: I/O error, dev sdb, sector 129307167 Buffer I/O error on device sdb10, logical block 61970728 Buffer I/O error on device sdb10, logical block 61970729 Buffer I/O error on device sdb10, logical block 61970730 Buffer I/O error on device sdb10, logical block 61970731 ata2: EH complete ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete sdb: Write Protect is off ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete SCSI device sdb: drive cache: write through ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x20 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 sd 1:0:0:0: SCSI error: return code = 0x08000002 sdb: Current: sense key: Aborted Command Additional sense: No additional sense information end_request: I/O error, dev sdb, sector 273100 Buffer I/O error on device sdb3, logical block 208840 Buffer I/O error on device sdb3, logical block 208841 Buffer I/O error on device sdb3, logical block 208842 Buffer I/O error on device sdb3, logical block 208843 Buffer I/O error on device sdb3, logical block 208844 ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete sdb: Write Protect is off ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete SCSI device sdb: drive cache: write through ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete ata2.00: speed down requested but no transfer mode left ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: tag 0 cmd 0x24 Emask 0x4 stat 0x40 err 0x0 (timeout) ata2: soft resetting port ata2: softreset failed (1st FIS failed) ata2: softreset failed, retrying in 5 secs ata2: hard resetting port ata2: port is slow to respond, please be patient ata2: port failed to respond (30 secs) ata2: COMRESET failed (device not ready) ata2: hardreset failed, retrying in 5 secs ata2: hard resetting port ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: configured for PIO0 ata2: EH complete SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) --------------010607070103030305000903--