From: Jonathan Dieter <jdieter@gmail.com>
To: Tejun Heo <htejun@gmail.com>, linux-ide@vger.kernel.org
Cc: Tom Deblauwe <tom.deblauwe@telenet.be>
Subject: MAP value 01b for ICH6M
Date: Tue, 03 Oct 2006 16:42:09 +0300 [thread overview]
Message-ID: <452268B1.8090304@gmail.com> (raw)
Tejun, I've received an e-mail from Tom Deblauwe about the ata_piix.c
fix for the ICH7M controllers with MAP value 01b. It looks like he has
a ICH6M controller with MAP value 01b. I'm including the relevant snips
from his dmesg and lspci. He has already used my original patch that
worked against both ICH6M and ICH7M controllers, not the one the made it
into the 2.6.18 kernel that just worked against the ICH7M controller.
I've CC'd him, so if you want to communicate directly with him, his
e-mail is included in the header.
Thanks,
Jonathan
-------- Original Message --------
From: Tom Deblauwe <tom.deblauwe "at" telenet "dat" be>
To: Jonathan Dieter <jdieter@gmail.com>
Subject: Re: Kernel 2.6.18 patch
Here is the log of dmesg and lspci -v:
Linux version 2.6.17.13 (root@majorTom) (gcc version 4.1.2 20060901
(prerelease) (Debian 4.1.1-13)) #1 SMP PREEMPT Thu Sep 14 14:38:22 CEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001f690000 (usable)
BIOS-e820: 000000001f690000 - 000000001f6a2000 (ACPI data)
BIOS-e820: 000000001f6a2000 - 000000001f700000 (ACPI NVS)
BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[snip]
SCSI subsystem initialized
libata version 1.20 loaded.
ahci 0000:00:1f.2: version 1.2
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 169
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
ahci: probe of 0000:00:1f.2 failed with error -12
ata_piix 0000:00:1f.2: version 1.05
ata_piix 0000:00:1f.2: MAP [ IDE IDE P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6023 85:3c69 86:3d01 87:6003
88:203f
ata1: dev 0 ATA-7, max UDMA/100, 195371568 sectors: LBA48
ata1: dev 1 cfg 49:0f00 82:421c 83:0000 84:0000 85:0000 86:0000 87:0000
88:0407
ata1: dev 1 ATAPI, max UDMA/33
ata1: dev 0 configured for UDMA/33
ata1: dev 1 configured for UDMA/33
scsi0 : ata_piix
Vendor: ATA Model: SAMSUNG HM100JC Rev: YN10
Type: Direct-Access ANSI SCSI revision: 05
Vendor: HL-DT-ST Model: DVDRAM GMA-4082N Rev: HA01
Type: CD-ROM ANSI SCSI revision: 05
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15
ata2: SATA port has no device.
scsi1 : ata_piix
[snip]
LSPCI -V:
majortom@majorTom:~$ lspci -v
[snip]
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev
03) (prog-if 80 [Master])
Subsystem: Wistron Corp. Unknown device 4042
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 169
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at 18b0 [size=16]
Capabilities: <access denied>
[snip]
next reply other threads:[~2006-10-03 13:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-03 13:42 Jonathan Dieter [this message]
2006-10-09 4:23 ` [PATCH] ata_piix: allow 01b MAP for both ICH6M and ICH7M Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=452268B1.8090304@gmail.com \
--to=jdieter@gmail.com \
--cc=htejun@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=tom.deblauwe@telenet.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).