sata_sis only recognizing primary drive in 2.6.18

linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* sata_sis only recognizing primary drive in 2.6.18
@ 2006-10-06  6:58 Jim Paris
  2006-10-06 10:57 ` Uwe Koziolek
  0 siblings, 1 reply; 7+ messages in thread
From: Jim Paris @ 2006-10-06  6:58 UTC (permalink / raw)
  To: Tejun Heo; +Cc: linux-ide, muthas, fragmede

Hi Tejun,

My friend has a motherboard with a SIS182 chipset (1039:0182), with
four ports on the motherboard.  BIOS sees it as two controllers,
"IDE2" and "IDE3" with two ports apiece: "IDE2 Primary", "IDE2
Secondary", etc.

If we plug drives into both the IDE2 Primary and IDE2 Secondary ports,
BIOS correctly sees and identifies both drives, and they're both
visible to grub, but sata_sis only sees the primary drive.  The second
drive just never shows up; no errors are reported.  This is with
Debian kernel 2.6.18 (same thing happens in .15, .16, .17).  Changing
various SATA-related BIOS settings doesn't help.

I don't have any logs on me at the moment, but I'm trying to get a
hold of this machine for a few days so I can put in a PATA root disk
and build/test custom libata modules with more debugging info.  Is
there anything in particular I should look for or try?

If I request warmplug with
  echo 0 0 0 > /sys/class/scsi_host/host1/scan
or
  echo 0 1 0 > /sys/class/scsi_host/host1/scan
then there is a soft-reset and the primary disk is rediscovered in
both cases, but neither causes the secondary disk to be discovered.

Also, hotplug polling doesn't seem to work.  Removed disks aren't
recognized as gone until I/O is attempted, and I have to request
warmplug to get an inserted disk recognized.  It's otherwise working
fine.

-jim

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: sata_sis only recognizing primary drive in 2.6.18
  2006-10-06  6:58 sata_sis only recognizing primary drive in 2.6.18 Jim Paris
@ 2006-10-06 10:57 ` Uwe Koziolek
  2006-10-06 21:22   ` Jim Paris
  2006-10-08  4:24   ` Tejun Heo
  0 siblings, 2 replies; 7+ messages in thread
From: Uwe Koziolek @ 2006-10-06 10:57 UTC (permalink / raw)
  To: Jim Paris; +Cc: Tejun Heo, linux-ide, muthas, fragmede

Hi Jim,

the sata_sis is running without slave support in the versions from
kernel.org. That is ok if you are using
a SiS964 and 965L chip. The SiS 965, SiS180 and SiS966 needs a slave
support.

The attached patch against 2.6.18 should help.

feedback, log and output of lspci -vvxxx are welcome.

regards
Uwe Koziolek
> My friend has a motherboard with a SIS182 chipset (1039:0182), with
> four ports on the motherboard.  BIOS sees it as two controllers,
> "IDE2" and "IDE3" with two ports apiece: "IDE2 Primary", "IDE2
> Secondary", etc.
>
> If we plug drives into both the IDE2 Primary and IDE2 Secondary ports,
> BIOS correctly sees and identifies both drives, and they're both
> visible to grub, but sata_sis only sees the primary drive.  The second
> drive just never shows up; no errors are reported.  This is with
--- a/drivers/scsi/sata_sis.c 2006-09-20 05:42:06.000000000 +0200
+++ b/drivers/scsi/sata_sis.c 2006-10-06 12:43:11.000000000 +0200
@@ -128,7 +128,7 @@

static struct ata_port_info sis_port_info = {
.sht = &sis_sht,
- .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+ .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
.mwdma_mask = 0x7,
.udma_mask = 0x7f,


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: sata_sis only recognizing primary drive in 2.6.18
  2006-10-06 10:57 ` Uwe Koziolek
@ 2006-10-06 21:22   ` Jim Paris
  2006-10-08  4:24   ` Tejun Heo
  1 sibling, 0 replies; 7+ messages in thread
From: Jim Paris @ 2006-10-06 21:22 UTC (permalink / raw)
  To: Uwe Koziolek; +Cc: Tejun Heo, linux-ide, muthas, fragmede

[-- Attachment #1: Type: text/plain, Size: 481 bytes --]

Uwe Koziolek wrote:
> the sata_sis is running without slave support in the versions from
> kernel.org. That is ok if you are using
> a SiS964 and 965L chip. The SiS 965, SiS180 and SiS966 needs a slave
> support.
> 
> The attached patch against 2.6.18 should help.
>
> + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS,

Hi Uwe,

Adding ATA_FLAG_SLAVE_POSS works great -- all drives are now recognized.
dmesg and lspci output are attached.

Thank you!

-jim

[-- Attachment #2: lspci.txt --]
[-- Type: text/plain, Size: 36111 bytes --]

00:00.0 Host bridge: Silicon Integrated Systems [SiS] 761/M761 Host (rev 01)
	Subsystem: Foxconn International, Inc. Unknown device 0c67
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 32
	Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=256M]
	Capabilities: [a0] AGP version 3.0
		Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
	Capabilities: [d0] HyperTransport: Slave or Primary Interface
		Command: BaseUnitID=0 UnitCnt=17 MastHost- DefDir- DUL-
		Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
		Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
		Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
		Link Config 1: MLWI=N/C DwFcIn- MLWO=N/C DwFcOut- LWI=N/C DwFcInEn- LWO=N/C DwFcOutEn-
		Revision ID: 1.05
		Link Frequency 0: 1.0GHz
		Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
		Link Frequency Capability 0: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz- 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
		Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA+ UIDRD-
		Link Frequency 1: 200MHz
		Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
		Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
		Error Handling: PFlE- OFlE- PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
		Prefetchable memory behind bridge Upper: 00-00
		Bus Number: 00
	Capabilities: [f0] HyperTransport: Interrupt Discovery and Configuration
	Capabilities: [5c] HyperTransport: Revision ID: 1.05
00: 39 10 61 07 07 00 10 22 01 00 00 06 00 20 00 00
10: 00 00 00 b0 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 67 0c
30: 00 00 00 00 a0 00 00 00 00 00 00 00 ff 00 00 00
40: 06 00 b9 8b 05 ff 90 a0 00 00 00 00 00 00 00 02
50: 00 00 00 00 00 00 00 00 00 00 00 44 08 00 25 88
60: 00 00 00 00 00 00 00 00 4c 00 00 07 dd ad e8 4d
70: 7c 80 10 00 01 10 00 00 00 00 00 00 00 00 29 10
80: 00 00 00 00 00 00 14 c8 00 00 00 10 00 03 00 80
90: 0a 40 10 03 00 00 00 00 00 00 00 00 00 00 00 00
a0: 02 d0 30 00 1b 4e 00 1f 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 0f 01 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 08 f0 20 02 20 00 11 11 d0 00 77 77 25 06 65 00
e0: 12 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 08 5c 00 80 f4 08 00 00 00 00 00 00 68 68 44 00

00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: d4000000-dbffffff
	Prefetchable memory behind bridge: 00000000c0000000-00000000c7ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
	Capabilities: [d0] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
		Device: Latency L0s <64ns, L1 <1us
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x16, ASPM unknown, Port 0
		Link: Latency L0s <1us, L1 <2us
		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x16
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
		Slot: Number 0, PowerLimit 75.000000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
		Slot: AttnInd Off, PwrInd Off, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [bc] HyperTransport: MSI Mapping
	Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
		Address: feeff000  Data: 4041
	Capabilities: [f4] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [b0] Subsystem: Silicon Integrated Systems [SiS] Unknown device 0000
00: 39 10 04 00 07 04 10 00 00 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 c1 c1 00 00
20: 00 d4 f0 db 01 c0 f1 c7 00 00 00 00 00 00 00 00
30: 00 00 00 00 d0 00 00 00 00 00 00 00 09 01 08 00
40: 10 00 00 78 02 10 01 00 52 e3 00 16 80 02 00 00
50: 00 00 00 2e 00 00 00 00 80 c1 05 00 52 ff 11 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 07 77 27 13 97 00 00 00 00 00 00 00 00 00 00 00
a0: 05 f4 01 00 00 f0 ef fe 41 40 00 00 00 00 00 00
b0: 0d 00 00 00 39 10 00 00 00 00 00 00 08 a0 02 a8
c0: 40 01 18 00 02 88 43 28 00 10 19 00 00 00 60 5c
d0: 10 bc 41 01 20 00 00 00 10 08 10 00 01 c1 10 00
e0: 00 00 01 31 80 25 00 00 c0 03 40 00 00 00 00 00
f0: 00 00 00 00 01 b0 02 c8 00 00 00 00 00 00 00 00

00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS965 [MuTIOL Media IO] (rev 48)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
00: 39 10 65 09 0f 00 00 02 48 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 93 09 0b 0a 05 60 3d dd 12 00 00 00 11 20 04 01
50: 11 28 02 01 61 0b 63 0b a5 12 12 00 36 06 b6 00
60: 05 0a 0b 06 ff c1 0c 12 09 80 00 00 80 00 00 00
70: 00 00 ff ff 00 10 03 3e 20 00 00 80 02 00 00 40
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 1f 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 f0 01 08 00 00 00 00 7c 80 10 00 00 00 00 75
d0: 03 00 00 00 44 63 30 00 45 00 04 6b aa aa aa aa
e0: 40 00 00 f8 43 00 44 00 00 00 00 00 00 00 00 00
f0: 0a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) (prog-if 80 [Master])
	Subsystem: Foxconn International, Inc. Unknown device 0c67
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 128
	Interrupt: pin ? routed to IRQ 9
	Region 0: I/O ports at <unassigned>
	Region 1: I/O ports at <unassigned>
	Region 2: I/O ports at <unassigned>
	Region 3: I/O ports at <unassigned>
	Region 4: I/O ports at 4000 [size=16]
	Capabilities: [58] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 39 10 13 55 05 00 10 02 01 80 01 01 00 80 00 00
10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00
20: 01 40 00 00 00 00 00 00 00 00 00 00 5b 10 67 0c
30: 00 00 00 00 58 00 00 00 00 00 00 00 00 00 00 00
40: 00 00 00 00 00 00 00 00 00 00 06 00 00 00 00 00
50: 82 21 82 21 2a 96 80 d0 01 00 02 80 00 00 00 00
60: fb aa fb aa 00 00 00 00 c8 00 a0 00 00 00 ff ff
70: 26 21 06 04 00 60 1c 1e 56 23 06 04 00 60 1c 1e
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
	Subsystem: Foxconn International, Inc. Unknown device 0c67
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (13000ns min, 2750ns max)
	Interrupt: pin C routed to IRQ 10
	Region 0: I/O ports at f000 [size=256]
	Region 1: I/O ports at fe00 [size=128]
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 39 10 12 70 05 00 90 02 a0 00 01 04 00 20 00 00
10: 01 f0 00 00 01 fe 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 67 0c
30: 00 00 00 00 48 00 00 00 00 00 00 00 0a 03 34 0b
40: 04 00 00 00 00 00 00 00 01 00 42 c6 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
	Subsystem: Foxconn International, Inc. Unknown device 0c67
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (20000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at dffff000 (32-bit, non-prefetchable) [size=4K]
00: 39 10 01 70 07 00 80 02 0f 10 03 0c 08 20 80 00
10: 00 f0 ff df 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 67 0c
30: 00 00 00 00 00 00 00 00 00 00 00 00 05 01 00 50
40: 00 00 00 00 54 af 01 00 7f 02 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 c2 c9
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
	Subsystem: Foxconn International, Inc. Unknown device 0c67
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (20000ns max), Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 10
	Region 0: Memory at dfffe000 (32-bit, non-prefetchable) [size=4K]
00: 39 10 01 70 07 00 80 02 0f 10 03 0c 08 20 00 00
10: 00 e0 ff df 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 67 0c
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 02 00 50
40: 00 00 00 00 54 af 01 00 7f 02 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 c2 c9
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
	Subsystem: Foxconn International, Inc. Unknown device 0c67
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (20000ns max), Cache Line Size: 32 bytes
	Interrupt: pin C routed to IRQ 11
	Region 0: Memory at dfffd000 (32-bit, non-prefetchable) [size=4K]
00: 39 10 01 70 07 00 80 02 0f 10 03 0c 08 20 00 00
10: 00 d0 ff df 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 67 0c
30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 03 00 50
40: 00 00 00 00 54 af 01 00 7f 02 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 c2 c9
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
	Subsystem: Silicon Integrated Systems [SiS] USB 2.0 Controller
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (20000ns max)
	Interrupt: pin D routed to IRQ 6
	Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 39 10 02 70 06 00 90 02 00 20 03 0c 00 20 00 00
10: 00 c0 ff df 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 39 10 02 70
30: 00 00 00 00 50 00 00 00 00 00 00 00 06 04 00 50
40: 20 00 00 08 04 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 c2 c9 00 00 00 00 0a 00 00 21 00 00 00 00
60: 20 20 ff 01 00 00 00 00 00 00 00 00 00 00 00 00
70: 01 00 00 01 00 00 08 e0 00 00 c7 3f 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter
	Subsystem: Foxconn International, Inc. Unknown device 0c67
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at dfffb000 (32-bit, non-prefetchable) [size=128]
	Region 1: I/O ports at fd00 [size=128]
	Capabilities: [40] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 39 10 91 01 07 00 10 02 00 00 00 02 00 00 00 00
10: 00 b0 ff df 01 fd 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 5b 10 67 0c
30: 00 00 00 00 40 00 00 00 00 00 00 00 05 01 00 00
40: 01 00 02 fe 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 40 00 00 00 00 00 00 00 00 04 05 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:05.0 IDE interface: Silicon Integrated Systems [SiS] 182 SATA/RAID Controller (rev 01) (prog-if 85 [Master SecO PriO])
	Subsystem: Foxconn International, Inc. Unknown device 0c67
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at fc00 [size=8]
	Region 1: I/O ports at fb00 [size=4]
	Region 2: I/O ports at fa00 [size=8]
	Region 3: I/O ports at f900 [size=4]
	Region 4: I/O ports at f800 [size=16]
	Region 5: I/O ports at f700 [size=128]
	Capabilities: [58] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 39 10 82 01 05 00 10 02 01 85 01 01 00 20 00 00
10: 01 fc 00 00 01 fb 00 00 01 fa 00 00 01 f9 00 00
20: 01 f8 00 00 01 f7 00 00 00 00 00 00 5b 10 67 0c
30: 00 00 00 00 58 00 00 00 00 00 00 00 0b 01 00 00
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 82 00 82 00 2a 96 80 14 01 00 02 80 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: bf 33 72 c0 bf 33 72 c0 bf 33 72 40 bf 33 72 40
90: 60 00 00 f0 c0 05 c0 05 cc 04 0c 10 c0 05 c0 05
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 13 01 00 00 00 00 00 00 00 03 00 00 00 00 00 00
d0: 13 01 00 00 00 00 00 00 00 03 00 00 00 00 00 00
e0: 00 00 00 00 01 00 18 00 00 03 00 00 00 00 00 00
f0: 00 00 00 00 01 00 18 00 00 03 00 00 00 00 00 00

00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: dfb00000-dfbfffff
	Prefetchable memory behind bridge: 00000000dfe00000-00000000dfefffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [d0] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
		Device: Latency L0s <64ns, L1 <1us
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
		Link: Latency L0s <1us, L1 <2us
		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x1
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
		Slot: Number 0, PowerLimit 0.000000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
		Slot: AttnInd Off, PwrInd Off, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [f4] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Virtual Channel
	Capabilities: [130] Advanced Error Reporting
00: 39 10 0a 00 07 00 10 00 00 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 00 b1 b1 00 00
20: b0 df b0 df e1 df e1 df 00 00 00 00 00 00 00 00
30: 00 00 00 00 d0 00 00 00 00 00 00 00 ff 00 00 00
40: 00 00 00 00 00 00 00 00 03 06 0c 00 00 00 08 00
50: 2e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 08 b0 02 a8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 0d c0 00 00 39 10 00 00 00 00 00 00 00 00 00 00
c0: 05 d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 10 f4 41 01 20 00 00 00 10 08 10 00 01 cd 00 00
e0: 00 00 11 10 00 00 00 00 c0 03 40 00 00 00 00 00
f0: 00 00 00 00 01 00 02 c8 00 00 00 00 00 00 00 00

00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: dfd00000-dfdfffff
	Prefetchable memory behind bridge: 00000000dfc00000-00000000dfcfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
	Capabilities: [d0] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
		Device: Latency L0s <64ns, L1 <1us
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
		Link: Latency L0s <1us, L1 <2us
		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x0
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
		Slot: Number 0, PowerLimit 0.000000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
		Slot: AttnInd Off, PwrInd Off, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [f4] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Virtual Channel
	Capabilities: [130] Advanced Error Reporting
00: 39 10 0a 00 07 00 10 00 00 00 04 06 08 00 01 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 d1 d1 00 00
20: d0 df d0 df c1 df c1 df 00 00 00 00 00 00 00 00
30: 00 00 00 00 d0 00 00 00 00 00 00 00 ff 00 00 00
40: 00 00 00 00 00 00 00 00 03 06 0c 00 00 00 08 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 08 b0 02 a8 00 00 00 00 00 00 00 00 00 00 00 00
b0: 0d c0 00 00 39 10 00 00 00 00 00 00 00 00 00 00
c0: 05 d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 10 f4 41 01 20 00 00 00 10 08 10 00 01 cd 00 00
e0: 00 00 01 10 00 00 00 00 c0 03 40 00 00 00 00 00
f0: 00 00 00 00 01 00 02 c8 00 00 00 00 00 00 00 00

00:0a.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev c1) (prog-if 00 [VGA])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at de000000 (32-bit, non-prefetchable) [disabled] [size=16M]
	Region 1: Memory at c8000000 (32-bit, prefetchable) [disabled] [size=128M]
	[virtual] Expansion ROM at 80000000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 85 01 00 00 b0 02 c1 00 00 03 00 20 00 00
10: 00 00 00 de 08 00 00 c8 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 60 00 00 00 00 00 00 00 0b 01 05 01
40: 00 00 00 00 02 00 30 00 17 02 00 1f 00 00 00 00
50: 00 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00
60: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0b.0 RAID bus controller: Triones Technologies, Inc. HPT302/302N (rev 02)
	Subsystem: Triones Technologies, Inc. Unknown device 0001
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 120 (2000ns min, 2000ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at f600 [size=8]
	Region 1: I/O ports at f500 [size=4]
	Region 2: I/O ports at f400 [size=8]
	Region 3: I/O ports at f300 [size=4]
	Region 4: I/O ports at ee00 [size=256]
	Expansion ROM at 80020000 [disabled by cmd] [size=128K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 03 11 06 00 05 00 30 02 02 00 04 01 00 78 00 00
10: 01 f6 00 00 01 f5 00 00 01 f4 00 00 01 f3 00 00
20: 01 ee 00 00 00 00 00 00 00 00 00 00 03 11 01 00
30: 01 00 02 80 60 00 00 00 00 00 00 00 0a 01 08 08
40: 62 dc 6d 1c 8a f4 c1 0a 62 dc 6d 1c 8a f4 c1 0a
50: 05 00 00 00 05 00 00 00 1b 00 00 23 1a 00 1c 00
60: 01 00 22 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 6c 00 f0 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Capabilities: [80] HyperTransport: Host or Secondary Interface
		!!! Possibly incomplete decoding
		Command: WarmRst+ DblEnd-
		Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
		Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
		Revision ID: 1.02
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
60: 00 00 00 00 e4 00 00 00 0f cc 00 0f 0c 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 00 01 21 20 00 11 11 22 06 75 80 02 00 00 00
90: 56 04 51 02 00 00 03 00 07 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 7f 00 00 00 00 00 01 00 00 00
50: 00 00 00 00 02 00 00 00 00 00 00 00 03 00 00 00
60: 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00
70: 00 00 00 00 06 00 00 00 00 00 00 00 07 00 00 00
80: 03 0a 00 00 00 0b 00 00 00 00 00 00 00 00 00 00
90: 03 00 80 00 00 ff df 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 03 00 f0 00 00 ff ef 00
b0: 03 00 e0 00 80 3f e0 00 00 00 00 00 00 00 00 00
c0: 13 b0 00 00 00 f0 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 03 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 00 00 00 01 20 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 de e0 07 00 de e0 07 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 07 00 00 00 00 00 00 00 52 3f 73 13 11 0b 00 00
90: 00 8e 05 a8 07 07 7b 3e 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 72 9f ed 84 62 00 00 00 d2 6d 14 80 c4 b1 ec 08
c0: 00 80 00 00 00 20 00 00 00 00 00 00 00 00 00 00
d0: 46 ae c7 06 d8 46 db c0 31 64 19 29 e6 65 80 49
e0: 21 e8 92 00 40 46 05 7a 2c ae 3a 32 31 02 c0 e3
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: ff 3b 00 00 40 00 00 00 00 00 00 00 00 00 00 00
50: 40 00 20 00 10 00 00 00 00 00 00 00 00 a2 27 ee
60: 37 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 11 01 02 51 11 80 00 50 00 38 00 08 1b 22 00 00
80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00
90: 06 00 00 00 58 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 3a 00 00 40 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 01 a7 0d 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 20 01 4e 09 19 05 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600 PCIe] (rev a2) (prog-if 00 [VGA])
	Subsystem: eVga.com. Corp. Unknown device c363
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 9
	Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=64M]
	Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M]
	Region 3: Memory at da000000 (64-bit, non-prefetchable) [size=16M]
	[virtual] Expansion ROM at d8000000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [78] Express Endpoint IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <512ns, L1 <4us
		Device: AtnBtn- AtnInd- PwrInd-
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
		Link: Latency L0s <1us, L1 <4us
		Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x16
	Capabilities: [100] Virtual Channel
	Capabilities: [128] Power Budgeting
00: de 10 42 01 07 00 10 00 a2 00 00 03 08 00 00 00
10: 00 00 00 d4 0c 00 00 c0 00 00 00 00 04 00 00 da
20: 00 00 00 00 00 00 00 00 00 00 00 00 42 38 63 c3
30: 00 00 00 00 60 00 00 00 00 00 00 00 09 01 00 00
40: 42 38 63 c3 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 00 01 00 c0 04 2c 01
80: 10 28 0a 00 01 4d 01 00 08 00 01 11 00 00 00 00
90: 00 00 00 00 00 00 00 00 0c 08 40 c1 01 04 40 c1
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 20)
	Subsystem: SysKonnect Unknown device 4340
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at dfbfc000 (64-bit, non-prefetchable) [size=16K]
	Region 2: I/O ports at be00 [size=256]
	[virtual] Expansion ROM at dfe00000 [disabled] [size=128K]
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data
	Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
		Address: 00000000feeff000  Data: 4049
	Capabilities: [e0] Express Legacy Endpoint IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s unlimited, L1 unlimited
		Device: AtnBtn- AtnInd- PwrInd-
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
		Link: Latency L0s <256ns, L1 unlimited
		Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch-
		Link: Speed 2.5Gb/s, Width x1
	Capabilities: [100] Advanced Error Reporting
00: ab 11 62 43 07 00 10 00 20 00 00 02 08 00 00 00
10: 04 c0 bf df 00 00 00 00 01 be 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 48 11 40 43
30: 00 00 00 00 48 00 00 00 00 00 00 00 0b 01 00 00
40: 00 00 f0 01 00 80 a0 01 01 50 02 fe 00 20 00 13
50: 03 5c 00 80 00 00 00 01 00 00 00 01 05 e0 82 00
60: 00 f0 ef fe 00 00 00 00 49 40 00 00 00 00 00 00
70: 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 10 00 11 00 c0 0f 00 00 00 20 1b 00 11 a4 03 00
f0: 08 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00


[-- Attachment #3: dmesg.txt --]
[-- Type: text/plain, Size: 18743 bytes --]

Bootdata ok (command line is root=/dev/sda2 ro )
Linux version 2.6.18-1-amd64 (Debian 2.6.18-2) (waldi@debian.org) (gcc version 4.1.2 20060920 (prerelease) (Debian 4.1.1-14)) #1 SMP Fri Sep 29 17:39:19 CEST 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
 BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
 BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.2 present.
ACPI: RSDP (v000 AWARD                                 ) @ 0x00000000000f7f10
ACPI: RSDT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fef3040
ACPI: FADT (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fef30c0
ACPI: SSDT (v001 PTLTD  POWERNOW 0x00000001  LTP 0x00000001) @ 0x000000007fef6e80
ACPI: SRAT (v001 AMD    HAMMER   0x00000001 AMD  0x00000001) @ 0x000000007fef6fc0
ACPI: MCFG (v001 AWARD  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fef70c0
ACPI: DSDT (v001 AWARD  AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 0-80000000
NUMA: Using 63 for the hash shift.
Bootmem setup node 0 0000000000000000-000000007fef0000
No mptable found.
On node 0 totalpages: 515872
  DMA zone: 3060 pages, LIFO batch:0
  DMA32 zone: 512812 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
No local APIC present
Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
SMP: Allowing 0 CPUs, 0 hotplug CPUs
Built 1 zonelists.  Total pages: 515872
Kernel command line: root=/dev/sda2 ro 
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 2199.416 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
CPU 0: aperture @ b0000000 size 32 MB
Aperture too small (32 MB)
AGP bridge at 00:00:00
Aperture from AGP @ b0000000 size 256 MB (APSIZE f00)
Memory: 2055144k/2096064k available (1929k kernel code, 40532k reserved, 863k data, 176k init)
Calibrating delay using timer specific routine.. 4400.89 BogoMIPS (lpj=8801796)
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
SMP alternatives: switching to UP code
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0e60)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Apic disabled by BIOS
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
testing NMI watchdog ... CPU#0: NMI appears to be stuck (0->0)!
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 5108k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
PCI: No mmconfig possible on device 0:18
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0A08
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0400
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C01
pnp: PnP ACPI: found 12 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI-DMA: Disabling IOMMU.
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:01' and the driver 'system'
pnp: match found with the PnP device '00:0a' and the driver 'system'
pnp: match found with the PnP device '00:0b' and the driver 'system'
PCI: Bridge: 0000:00:01.0
  IO window: c000-cfff
  MEM window: d4000000-dbffffff
  PREFETCH window: c0000000-c7ffffff
PCI: Bridge: 0000:00:06.0
  IO window: b000-bfff
  MEM window: dfb00000-dfbfffff
  PREFETCH window: dfe00000-dfefffff
PCI: Bridge: 0000:00:07.0
  IO window: d000-dfff
  MEM window: dfd00000-dfdfffff
  PREFETCH window: dfc00000-dfcfffff
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1160168547.588:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
0000:00:03.3 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
PCI: Setting latency timer of device 0000:00:06.0 to 64
pcie_portdrv_probe->Dev[000a:1039] has invalid IRQ. Check vendor BIOS
Allocate Port Service[0000:00:06.0:pcie00]
Allocate Port Service[0000:00:06.0:pcie01]
Allocate Port Service[0000:00:06.0:pcie03]
PCI: Setting latency timer of device 0000:00:07.0 to 64
pcie_portdrv_probe->Dev[000a:1039] has invalid IRQ. Check vendor BIOS
Allocate Port Service[0000:00:07.0:pcie00]
Allocate Port Service[0000:00:07.0:pcie01]
Allocate Port Service[0000:00:07.0:pcie03]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:06' and the driver 'serial'
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: match found with the PnP device '00:07' and the driver 'serial'
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
usbmon: debugfs is not available
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:09' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 176k freed
ACPI: Fan [FAN] (on)
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x1
ACPI: Thermal Zone [THRM] (36 C)
input: AT Translated Set 2 keyboard as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
HPT302: IDE controller at PCI slot 0000:00:0b.0
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
HPT302: chipset revision 2
HPT302: 100% native mode on irq 10
HPT37X: using 33MHz PCI clock
    ide2: BM-DMA at 0xee00-0xee07, BIOS settings: hde:DMA, hdf:pio
HPT37X: using 33MHz PCI clock
    ide3: BM-DMA at 0xee08-0xee0f, BIOS settings: hdg:DMA, hdh:pio
Probing IDE interface ide2...
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
hde: ST3160022A, ATA DISK drive
ide2 at 0xf600-0xf607,0xf502 on irq 10
Probing IDE interface ide3...
hdg: SAMSUNG SP0802N, ATA DISK drive
ide3 at 0xf400-0xf407,0xf302 on irq 10
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 6
PCI: setting IRQ 6 as level-triggered
ACPI: PCI Interrupt 0000:00:03.3[D] -> Link [LNKH] -> GSI 6 (level, low) -> IRQ 6
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
PCI: cache line size of 64 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: irq 6, io mem 0xdfffc000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
SCSI subsystem initialized
libata version 2.00 loaded.
hde: max request size: 512KiB
hde: 312558593 sectors (160029 MB) w/1024KiB Cache, CHS=19455/255/63, UDMA(100)
hde: cache flushes supported
 hde: hde1 hde2 hde3
hdg: max request size: 512KiB
hdg: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hdg: cache flushes supported
 hdg: hdg1 hdg2
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 5, io mem 0xdffff000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:03.1[B] -> Link [LNKF] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 10, io mem 0xdfffe000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:03.2[C] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 11, io mem 0xdfffd000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI Interrupt 0000:00:02.5[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
SIS5513: chipset revision 1
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS965 ATA 133 (2nd gen) controller
    ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
usb 3-1: new low speed USB device using ohci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: Hewlett-Packard  HP f2100a Optical USB Travel Mouse as /class/input/input1
input: USB HID v1.00 Mouse [Hewlett-Packard  HP f2100a Optical USB Travel Mouse] on usb-0000:00:03.1-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
hda: DVD DC DQ60, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SAMSUNG SP0822N, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
hdc: max request size: 512KiB
hdc: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33)
hdc: cache flushes supported
 hdc: hdc1 hdc2
sata_sis 0000:00:05.0: version 0.6
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
sata_sis 0000:00:05.0: Detected SiS 182 chipset
ata1: SATA max UDMA/133 cmd 0xFC00 ctl 0xFB02 bmdma 0xF800 irq 11
ata2: SATA max UDMA/133 cmd 0xFA00 ctl 0xF902 bmdma 0xF808 irq 11
scsi0 : sata_sis
hda: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 1419kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 1
ata1.01: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
ata1.01: ata1: dev 1 multi count 1
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/133
scsi1 : sata_sis
ata2: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xFA07
  Vendor: ATA       Model: ST3320620AS       Rev: 3.AA
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: ATA       Model: ST3320620AS       Rev: 3.AA
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
 sdb:
sd 0:0:1:0: Attached scsi disk sdb
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
md: raid1 personality registered for level 1
raid5: automatically using best checksumming function: generic_sse
   generic_sse:  6730.000 MB/sec
raid5: using function: generic_sse (6730.000 MB/sec)
raid6: int64x1   2004 MB/s
raid6: int64x2   2651 MB/s
raid6: int64x4   2512 MB/s
raid6: int64x8   1756 MB/s
raid6: sse2x1    2739 MB/s
raid6: sse2x2    3692 MB/s
raid6: sse2x4    3989 MB/s
raid6: using algorithm sse2x4 (3989 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: md0 stopped.
md: bind<hdc1>
md: bind<hdg1>
md: bind<hde1>
md: kicking non-fresh hdc1 from array!
md: unbind<hdc1>
md: export_rdev(hdc1)
raid5: device hde1 operational as raid disk 1
raid5: device hdg1 operational as raid disk 2
raid5: allocated 3212kB for md0
raid5: raid level 5 set md0 active with 2 out of 3 devices, algorithm 2
RAID5 conf printout:
 --- rd:3 wd:2 fd:1
 disk 1, o:1, dev:hde1
 disk 2, o:1, dev:hdg1
md: md1 stopped.
md: bind<hdc2>
md: bind<hdg2>
md: bind<hde2>
md: kicking non-fresh hdc2 from array!
md: unbind<hdc2>
md: export_rdev(hdc2)
raid1: raid set md1 active with 2 out of 3 mirrors
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PC Speaker as /class/input/input2
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:08' and the driver 'parport_pc'
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
agpgart: Unsupported SiS chipset (device id: 0761)
ts: Compaq touchscreen protocol output
sis190 Gigabit Ethernet driver 1.2 loaded.
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:04.0 to 64
0000:00:04.0: Read MAC address from EEPROM
Intel 810 + AC97 Audio, version 1.01, 17:40:31 Sep 29 2006
0000:00:04.0: Broadcom PHY BCM5461 transceiver at address 1.
0000:00:04.0: Using transceiver at address 1 as default.
0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at ffffc2000001e000 (IRQ: 5), 71:d9:00:00:00:00
eth0: RGMII mode.
eth0: Enabling Auto-negotiation.
ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
i810: SiS 7012 found at IO 0xfe00 and 0xf000, MEM 0x0000 and 0x0000, IRQ 10
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97  codec, id: ALG97 (Unknown)
i810_audio: only 48Khz playback available.
i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 v1.5 addr 0xdfbfc000 irq 5 Yukon-EC (0xb6) rev 2
sky2 eth0: addr 00:00:5a:00:01:98
sky2 0000:02:00.0: No interrupt was generated using MSI, switching to INTx mode. Please report this failure to the PCI maintainer and include system chipset information.
EXT3 FS on sda2, internal journal
loop: loaded (max 8 devices)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
sky2 eth0: enabling interface
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6 over IPv4 tunneling driver
sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: sata_sis only recognizing primary drive in 2.6.18
  2006-10-06 10:57 ` Uwe Koziolek
  2006-10-06 21:22   ` Jim Paris
@ 2006-10-08  4:24   ` Tejun Heo
  2006-10-21 21:04     ` Uwe Koziolek
  1 sibling, 1 reply; 7+ messages in thread
From: Tejun Heo @ 2006-10-08  4:24 UTC (permalink / raw)
  To: Uwe Koziolek; +Cc: Jim Paris, linux-ide, muthas, fragmede

Hi!

Uwe Koziolek wrote:
> Hi Jim,
> 
> the sata_sis is running without slave support in the versions from
> kernel.org. That is ok if you are using
> a SiS964 and 965L chip. The SiS 965, SiS180 and SiS966 needs a slave
> support.
> 
> The attached patch against 2.6.18 should help.
> 
> feedback, log and output of lspci -vvxxx are welcome.

Can you make separate port_info for controllers which support 4 ports 
and send a properly formatted patch?

Thanks.

-- 
tejun


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: sata_sis only recognizing primary drive in 2.6.18
  2006-10-08  4:24   ` Tejun Heo
@ 2006-10-21 21:04     ` Uwe Koziolek
  2006-10-23  2:14       ` Tejun Heo
  0 siblings, 1 reply; 7+ messages in thread
From: Uwe Koziolek @ 2006-10-21 21:04 UTC (permalink / raw)
  To: Tejun Heo; +Cc: Jim Paris, linux-ide, muthas, fragmede, David Wang

Hi,

I have tested the patch with separate port_info and a patch only adding
the flag ATA_FLAG_SLAVE_POSS for all controllers.
The result  is allways  the  same.  The second sata disk  is allways
/dev/sdb. libata handles this  correctly.

So i am not sure, that the separate port_info is really necessary. My
assumption is a ATA_FLAG_SLAVE_POSS
is sufficient for a correct handling.

If i am wrong, i will send a patch with separate port_info .

regards,
Uwe

Tejun Heo wrote:
> Hi!
>
> Uwe Koziolek wrote:
>> Hi Jim,
>>
>> the sata_sis is running without slave support in the versions from
>> kernel.org. That is ok if you are using
>> a SiS964 and 965L chip. The SiS 965, SiS180 and SiS966 needs a slave
>> support.
>>
>> The attached patch against 2.6.18 should help.
>>
>> feedback, log and output of lspci -vvxxx are welcome.
>
> Can you make separate port_info for controllers which support 4 ports
> and send a properly formatted patch?
>
> Thanks.
>

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: sata_sis only recognizing primary drive in 2.6.18
  2006-10-21 21:04     ` Uwe Koziolek
@ 2006-10-23  2:14       ` Tejun Heo
  2006-10-23  8:45         ` Uwe Koziolek
  0 siblings, 1 reply; 7+ messages in thread
From: Tejun Heo @ 2006-10-23  2:14 UTC (permalink / raw)
  To: Uwe Koziolek; +Cc: Jim Paris, linux-ide, muthas, fragmede, David Wang

Uwe Koziolek wrote:
> Hi,
> 
> I have tested the patch with separate port_info and a patch only adding
> the flag ATA_FLAG_SLAVE_POSS for all controllers.
> The result  is allways  the  same.  The second sata disk  is allways
> /dev/sdb. libata handles this  correctly.
> 
> So i am not sure, that the separate port_info is really necessary. My
> assumption is a ATA_FLAG_SLAVE_POSS
> is sufficient for a correct handling.
> 
> If i am wrong, i will send a patch with separate port_info .

It might be sufficient to just add ATA_FLAG_SLAVE_POSS for all 
controllers but in general we don't want to sprinkle that flag over 
controllers which don't actually support slave device - sometimes for 
safety and also for documentation purpose.  So, please make a separate 
port_info and add ATA_FLAG_SLAVE_POSS only to controllers which actually 
support slave devices.

Thanks.

-- 
tejun

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: sata_sis only recognizing primary drive in 2.6.18
  2006-10-23  2:14       ` Tejun Heo
@ 2006-10-23  8:45         ` Uwe Koziolek
  0 siblings, 0 replies; 7+ messages in thread
From: Uwe Koziolek @ 2006-10-23  8:45 UTC (permalink / raw)
  To: Tejun Heo; +Cc: Jim Paris, linux-ide, muthas, fragmede, David Wang

Hi,

here is the patch for slave support. No fixes for the second port handling are included.

regards
Uwe

> 
> It might be sufficient to just add ATA_FLAG_SLAVE_POSS for all 
> controllers but in general we don't want to sprinkle that flag over 
> controllers which don't actually support slave device - sometimes for 
> safety and also for documentation purpose.  So, please make a separate 
> port_info and add ATA_FLAG_SLAVE_POSS only to controllers which actually 
> support slave devices.

--- a/drivers/ata/sata_sis.c	2006-10-18 23:15:59.000000000 +0200
+++ b/drivers/ata/sata_sis.c	2006-10-23 10:16:09.000000000 +0200
@@ -126,13 +126,26 @@
 	.host_stop		= ata_host_stop,
 };
 
-static struct ata_port_info sis_port_info = {
-	.sht		= &sis_sht,
-	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
-	.pio_mask	= 0x1f,
-	.mwdma_mask	= 0x7,
-	.udma_mask	= 0x7f,
-	.port_ops	= &sis_ops,
+static struct ata_port_info sis_port_info[] = {
+	/* 2 ports, SiS964, SiS965L, SiS966L */
+	{
+		.sht		= &sis_sht,
+		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
+		.pio_mask	= 0x1f,
+		.mwdma_mask	= 0x7,
+		.udma_mask	= 0x7f,
+		.port_ops	= &sis_ops,
+	},
+	/* 4 ports, SiS180, SiS965, SiS966 */
+	{
+		.sht		= &sis_sht,
+		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_SLAVE_POSS,
+		.pio_mask	= 0x1f,
+		.mwdma_mask	= 0x7,
+		.udma_mask	= 0x7f,
+		.port_ops	= &sis_ops,
+	}
 };
 
 
@@ -244,6 +257,8 @@
 	int pci_dev_busy = 0;
 	u8 pmr;
 	u8 port2_start;
+	int slave_poss = 0;
+	u32 chipid;
 
 	if (!printed_version++)
 		dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
@@ -265,7 +280,38 @@
 	if (rc)
 		goto err_out_regions;
 
-	ppi[0] = ppi[1] = &sis_port_info;
+	switch (ent->device) {
+	case 0x0180:
+	case 0x0181:	/* SiS180/181/964 */
+		pci_read_config_byte(pdev, SIS_PMR, &pmr);
+		if ((pmr & SIS_PMR_COMBINED) == 0) {
+			dev_printk(KERN_INFO, &pdev->dev,
+				   "Detected SiS 180/181/964 chipset in SATA mode\n");
+			port2_start = 64;
+		}
+		else {
+			dev_printk(KERN_INFO, &pdev->dev,
+				   "Detected SiS 180/181 chipset in combined mode\n");
+			port2_start = 0;
+			slave_poss = 1;
+		}
+		break;
+	case 0x182:		/* SiS965/965L */
+		pci_read_config_dword ( pdev, 0x6C, &chipid);
+		if (chipid & (1L << 31)) {
+			dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965 chipset\n");
+			slave_poss = 1;
+		}
+		else {
+			dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965L chipset\n");
+		}
+		port2_start = 0x20;
+		break;
+	}
+	ppi[0] = ppi[1] = &sis_port_info[0];
+	if (slave_poss) {
+		ppi[0] = ppi[1] = &sis_port_info[1];
+	}
 	probe_ent = ata_pci_init_native_mode(pdev, ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY);
 	if (!probe_ent) {
 		rc = -ENOMEM;
@@ -288,24 +334,6 @@
 		probe_ent->port_flags |= SIS_FLAG_CFGSCR;
 	}
 
-	pci_read_config_byte(pdev, SIS_PMR, &pmr);
-	if (ent->device != 0x182) {
-		if ((pmr & SIS_PMR_COMBINED) == 0) {
-			dev_printk(KERN_INFO, &pdev->dev,
-				   "Detected SiS 180/181 chipset in SATA mode\n");
-			port2_start = 64;
-		}
-		else {
-			dev_printk(KERN_INFO, &pdev->dev,
-				   "Detected SiS 180/181 chipset in combined mode\n");
-			port2_start=0;
-		}
-	}
-	else {
-		dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182 chipset\n");
-		port2_start = 0x20;
-	}
-
 	if (!(probe_ent->port_flags & SIS_FLAG_CFGSCR)) {
 		probe_ent->port[0].scr_addr =
 			pci_resource_start(pdev, SIS_SCR_PCI_BAR);



^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2006-10-23  8:45 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-10-06  6:58 sata_sis only recognizing primary drive in 2.6.18 Jim Paris
2006-10-06 10:57 ` Uwe Koziolek
2006-10-06 21:22   ` Jim Paris
2006-10-08  4:24   ` Tejun Heo
2006-10-21 21:04     ` Uwe Koziolek
2006-10-23  2:14       ` Tejun Heo
2006-10-23  8:45         ` Uwe Koziolek

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).