From: Avi Kivity <avi@argo.co.il>
To: Ryan Richter <ryan@tau.solarneutrino.net>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>,
"Dr. David Alan Gilbert" <dave@treblig.org>,
linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org
Subject: Re: DVD drive not recognized on Intel G965 (2.6.19-rc2)
Date: Wed, 18 Oct 2006 07:32:24 +0200 [thread overview]
Message-ID: <4535BC68.40509@argo.co.il> (raw)
In-Reply-To: <20061017222310.GA24891@tau.solarneutrino.net>
Ryan Richter wrote:
>
> > > Try adding all-generic-ide to the kernel command line, and if that
> > > fails, post your lspci output.
> >
> I tried this and also the Marvell PATA driver you posted, and still
> nothing.
>
> Here's my lspci output and my current .config:
>
>
> 02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device
> 6101 (rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
>
My own lspci says:
02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device
6101 (rev b1)
and the DVD works:
Unknown: IDE controller at PCI slot 0000:02:00.0
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 169
Unknown: chipset revision 177
Unknown: 100% native mode on irq 169
ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: HL-DT-ST DVDRAM GSA-H10A, ATAPI CD/DVD-ROM drive
ide0 at 0x2018-0x201f,0x2026 on irq 169
Since I'm running a Fedora kernel, you might want to look at their
patchlist and .config. I briefly ran mainline, but I can't remember if
I accessed the drive while running that.
--
Do not meddle in the internals of kernels, for they are subtle and quick to panic.
prev parent reply other threads:[~2006-10-18 5:32 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-13 21:20 DVD drive not recognized on Intel G965 (2.6.19-rc2) Ryan Richter
[not found] ` <20061014125644.GA13837@gallifrey>
2006-10-17 18:04 ` Ryan Richter
2006-10-17 19:48 ` Avi Kivity
2006-10-17 22:32 ` Alan Cox
2006-10-17 22:23 ` Ryan Richter
2006-10-17 23:26 ` Alan Cox
2006-10-17 23:50 ` Ryan Richter
2006-10-18 5:32 ` Avi Kivity [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4535BC68.40509@argo.co.il \
--to=avi@argo.co.il \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=dave@treblig.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ryan@tau.solarneutrino.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).