From mboxrd@z Thu Jan 1 00:00:00 1970 From: Avi Kivity Subject: Re: DVD drive not recognized on Intel G965 (2.6.19-rc2) Date: Wed, 18 Oct 2006 07:32:24 +0200 Message-ID: <4535BC68.40509@argo.co.il> References: <20061017222310.GA24891@tau.solarneutrino.net> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from gateway.argo.co.il ([194.90.79.130]:44304 "EHLO argo2k.argo.co.il") by vger.kernel.org with ESMTP id S1751404AbWJRFc2 (ORCPT ); Wed, 18 Oct 2006 01:32:28 -0400 In-Reply-To: <20061017222310.GA24891@tau.solarneutrino.net> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Ryan Richter Cc: Alan Cox , "Dr. David Alan Gilbert" , linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org Ryan Richter wrote: > > > > Try adding all-generic-ide to the kernel command line, and if that > > > fails, post your lspci output. > > > I tried this and also the Marvell PATA driver you posted, and still > nothing. > > Here's my lspci output and my current .config: > > > 02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device > 6101 (rev b1) (prog-if 8f [Master SecP SecO PriP PriO]) > My own lspci says: 02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6101 (rev b1) and the DVD works: Unknown: IDE controller at PCI slot 0000:02:00.0 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 169 Unknown: chipset revision 177 Unknown: 100% native mode on irq 169 ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: HL-DT-ST DVDRAM GSA-H10A, ATAPI CD/DVD-ROM drive ide0 at 0x2018-0x201f,0x2026 on irq 169 Since I'm running a Fedora kernel, you might want to look at their patchlist and .config. I briefly ran mainline, but I can't remember if I accessed the drive while running that. -- Do not meddle in the internals of kernels, for they are subtle and quick to panic.