From mboxrd@z Thu Jan 1 00:00:00 1970 From: Udo van den Heuvel Subject: sata_via issue for VIA Epia SP8000 in 2.6.18[.1]? Date: Sun, 22 Oct 2006 14:44:38 +0200 Message-ID: <453B67B6.9060708@xs4all.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: Received: from smtp-vbr16.xs4all.nl ([194.109.24.36]:41476 "EHLO smtp-vbr16.xs4all.nl") by vger.kernel.org with ESMTP id S1750739AbWJVMol (ORCPT ); Sun, 22 Oct 2006 08:44:41 -0400 Received: from [192.168.10.69] (pindarots.xs4all.nl [82.92.197.115]) (authenticated bits=0) by smtp-vbr16.xs4all.nl (8.13.8/8.13.8) with ESMTP id k9MCicCd095940 for ; Sun, 22 Oct 2006 14:44:39 +0200 (CEST) (envelope-from udovdh@xs4all.nl) Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Hello, 2.6.17.13 works OK on this VIA Epia SP8000. (remember vaguely about some (PCI?) fixups to get things going) Now I try to get 2.6.18.1 working. SATA is detected by this kernel but disk gives timeout while 2.6.17.13 boots fine. Some blurbs: Links is up but SStatus 113 SControl 300 qc timeout (cmd 0xec) failed to IDENTIFY This results in a kernel panic. Any ideas? 2.6.17.13 gives stuff like this: scsi0 : sata_via ata2: SATA link up 1.5 Gbps (SStatus 113) ata2: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:40ff ata2: dev 0 ATA-7, max UDMA7, 312581808 sectors: LBA48 ata2: dev 0 configured for UDMA/133 scsi1 : sata_via Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 > sd 1:0:0:0: Attached scsi disk sda Udo PS: Sorry for sending this also to linux-kernel