* [PMP] sil3132 st6600 problem
@ 2006-11-11 1:24 Daniel Schröder
2006-11-21 6:00 ` Tejun Heo
0 siblings, 1 reply; 3+ messages in thread
From: Daniel Schröder @ 2006-11-11 1:24 UTC (permalink / raw)
To: htejun; +Cc: linux-ide
Hello *,
a couple of weeks ago, i posted a "success" message. This time i have a
strange issue to report. A couple of weeks, with only one Samsung
HD401LJ and everything was fine. Yesterday, i put another drive a
Samsung HD501LJ into the second bay and shortly after this. (After FDISK
and MKFS and a couple of powercycles) The device is completely
unresponsive. With this device on, Windows XP freezes instantly...Linux
shows the following at turning on:
And everytime, when i played with this device, he said something about
USB...WTF?! Same IRQ? I dont think so:
<interrupts>
cat /proc/interrupts
CPU0
0: 876859 XT-PIC timer
1: 7955 XT-PIC i8042
2: 0 XT-PIC cascade
5: 466863 XT-PIC libata, libata, libata, eth1
7: 347524 XT-PIC libata, eth0
9: 0 XT-PIC acpi
10: 931 XT-PIC ehci_hcd:usb1, HDA Intel
11: 211376 XT-PIC ohci1394, nvidia
12: 25578 XT-PIC i8042
14: 46 XT-PIC ide0
NMI: 0
LOC: 876799
ERR: 1
MIS: 0
</interrupts>
beneath you find some logs:
1. first time i put the device on with the new harddisk added
2. "test" of hotplug
3. device is dead
any clues/hints what i could do?
TIA
Daniel
<log-first-time-all-seems-to-be-ok.but why he wrote this with USB at the
time i turn on the device?>
Nov 9 12:35:04 isla-magica hub 1-2:1.0: port 2 disabled by hub (EMI?),
re-enabling...
Nov 9 12:35:04 isla-magica usb 1-2.2: USB disconnect, address 4
Nov 9 12:35:04 isla-magica ata1: exception Emask 0x10 SAct 0x0 SErr
0x10000 action 0x42 frozen
Nov 9 12:35:04 isla-magica ata1: (irq_stat 0x00a00080, device exchanged)
Nov 9 12:35:04 isla-magica usb 1-2.2: new low speed USB device using
ehci_hcd and address 7
Nov 9 12:35:04 isla-magica usb 1-2.2: configuration #1 chosen from 1 choice
Nov 9 12:35:04 isla-magica input: HID 0c12:0005 as /class/input/input3
Nov 9 12:35:04 isla-magica input: USB HID v1.00 Joystick [HID
0c12:0005] on usb-0000:00:0a.1-2.2
Nov 9 12:35:04 isla-magica ata1: waiting for device to spin up (8 secs)
Nov 9 12:35:12 isla-magica ata1: soft resetting port
Nov 9 12:35:12 isla-magica ata1: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Nov 9 12:35:12 isla-magica ata1.15: Port Multiplier 1.1, 0x1095:0x3726
r23, 5 ports, feat 0x9/0x9
Nov 9 12:35:13 isla-magica ata1.00: hard resetting port
Nov 9 12:35:13 isla-magica ata1.00: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Nov 9 12:35:13 isla-magica ata1.01: hard resetting port
Nov 9 12:35:14 isla-magica ata1.01: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Nov 9 12:35:14 isla-magica ata1.02: hard resetting port
Nov 9 12:35:14 isla-magica ata1.02: SATA link down (SStatus 0 SControl 300)
Nov 9 12:35:14 isla-magica ata1.03: hard resetting port
Nov 9 12:35:15 isla-magica ata1.03: SATA link down (SStatus 0 SControl 300)
Nov 9 12:35:15 isla-magica ata1.04: hard resetting port
Nov 9 12:35:15 isla-magica ata1.04: SATA link down (SStatus 0 SControl 300)
Nov 9 12:35:15 isla-magica ata1.00: ATA-7, max UDMA7, 976773168
sectors: LBA48 NCQ (depth 31/32)
Nov 9 12:35:15 isla-magica ata1.00: configured for UDMA/100
Nov 9 12:35:15 isla-magica ata1.01: ATA-7, max UDMA7, 781422768
sectors: LBA48 NCQ (depth 31/32)
Nov 9 12:35:15 isla-magica ata1.01: configured for UDMA/100
Nov 9 12:35:15 isla-magica ata1: EH complete
Nov 9 12:35:15 isla-magica Vendor: ATA Model: SAMSUNG HD501LJ
Rev: CR10
Nov 9 12:35:15 isla-magica Type: Direct-Access
ANSI SCSI revision: 05
Nov 9 12:35:15 isla-magica SCSI device sdd: 976773168 512-byte hdwr
sectors (500108 MB)
Nov 9 12:35:15 isla-magica sdd: Write Protect is off
Nov 9 12:35:15 isla-magica sdd: Mode Sense: 00 3a 00 00
Nov 9 12:35:15 isla-magica SCSI device sdd: drive cache: write back
Nov 9 12:35:15 isla-magica SCSI device sdd: 976773168 512-byte hdwr
sectors (500108 MB)
Nov 9 12:35:15 isla-magica sdd: Write Protect is off
Nov 9 12:35:15 isla-magica sdd: Mode Sense: 00 3a 00 00
Nov 9 12:35:15 isla-magica SCSI device sdd: drive cache: write back
Nov 9 12:35:15 isla-magica sdd: unknown partition table
Nov 9 12:35:15 isla-magica sd 0:0:0:0: Attached scsi disk sdd
Nov 9 12:35:15 isla-magica sd 0:0:0:0: Attached scsi generic sg3 type 0
Nov 9 12:35:15 isla-magica Vendor: ATA Model: SAMSUNG HD401LJ
Rev: ZZ10
Nov 9 12:35:15 isla-magica Type: Direct-Access
ANSI SCSI revision: 05
Nov 9 12:35:15 isla-magica SCSI device sde: 781422768 512-byte hdwr
sectors (400088 MB)
Nov 9 12:35:15 isla-magica sde: Write Protect is off
Nov 9 12:35:15 isla-magica sde: Mode Sense: 00 3a 00 00
Nov 9 12:35:15 isla-magica SCSI device sde: drive cache: write back
Nov 9 12:35:15 isla-magica SCSI device sde: 781422768 512-byte hdwr
sectors (400088 MB)
Nov 9 12:35:15 isla-magica sde: Write Protect is off
Nov 9 12:35:15 isla-magica sde: Mode Sense: 00 3a 00 00
Nov 9 12:35:15 isla-magica SCSI device sde: drive cache: write back
Nov 9 12:35:15 isla-magica sde: sde1
Nov 9 12:35:15 isla-magica sd 0:0:1:0: Attached scsi disk sde
Nov 9 12:35:15 isla-magica sd 0:0:1:0: Attached scsi generic sg4 type 0
Nov 9 12:35:15 isla-magica scsi.agent[9175]: disk at
/devices/pci0000:00/0000:00:16.0/0000:06:00.0/host0/target0:0:0/0:0:0:0
Nov 9 12:35:15 isla-magica scsi.agent[9192]: disk at
/devices/pci0000:00/0000:00:16.0/0000:06:00.0/host0/target0:0:1/0:0:1:0
</log-first-time-all-seems-to-be-ok.but why he wrote this with USB at
the time i turn on the device?>
test of hotplug
<log-hotplug>
Nov 9 12:38:44 isla-magica ata1.15: exception Emask 0x100 SAct 0x0 SErr
0x0 action 0x1 frozen
Nov 9 12:38:44 isla-magica ata1.15: (irq_stat 0x08000800, SDB notify)
Nov 9 12:38:44 isla-magica ata1.15: failed to read PMP GSCR[0] (errno=-16)
Nov 9 12:38:44 isla-magica ata1.15: PMP revalidation failed (errno=-16)
Nov 9 12:38:44 isla-magica ata1.15: retrying hardreset
Nov 9 12:38:44 isla-magica ata1.15: hard resetting port
Nov 9 12:38:49 isla-magica ata1.15: SATA link down (SStatus 1 SControl 300)
Nov 9 12:38:50 isla-magica ata1.15: failed to read PMP GSCR[0] (errno=-16)
Nov 9 12:38:50 isla-magica ata1.15: PMP revalidation failed (errno=-16)
Nov 9 12:38:50 isla-magica ata1.15: retrying hardreset in 5 secs
Nov 9 12:38:55 isla-magica ata1.15: hard resetting port
Nov 9 12:38:56 isla-magica hub 1-2:1.0: port 2 disabled by hub (EMI?),
re-enabling...
Nov 9 12:38:56 isla-magica usb 1-2.2: USB disconnect, address 7
Nov 9 12:38:56 isla-magica usb 1-2.2: new low speed USB device using
ehci_hcd and address 8
Nov 9 12:38:56 isla-magica usb 1-2.2: configuration #1 chosen from 1 choice
Nov 9 12:38:56 isla-magica input: HID 0c12:0005 as /class/input/input4
Nov 9 12:38:56 isla-magica input: USB HID v1.00 Joystick [HID
0c12:0005] on usb-0000:00:0a.1-2.2
Nov 9 12:38:58 isla-magica ata1.15: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Nov 9 12:38:59 isla-magica ata1.00: hard resetting port
Nov 9 12:39:00 isla-magica ata1.00: softreset failed (SRST command error)
Nov 9 12:39:00 isla-magica ata1.00: follow-up softreset failed,
retrying in 5 secs
Nov 9 12:39:05 isla-magica ata1.00: hard resetting port
Nov 9 12:39:07 isla-magica ata1.01: hard resetting port
Nov 9 12:39:08 isla-magica ata1.01: COMRESET failed (errno=-16)
Nov 9 12:39:08 isla-magica ata1.01: hardreset failed, retrying in 5 secs
Nov 9 12:39:14 isla-magica ata1.01: hard resetting port
Nov 9 12:39:15 isla-magica ata1.01: COMRESET failed (errno=-16)
Nov 9 12:39:15 isla-magica ata1.01: reset failed, giving up
Nov 9 12:39:15 isla-magica ata1.15: hard resetting port
Nov 9 12:39:15 isla-magica ata1: controller in dubious state,
performing PORT_RST
Nov 9 12:39:17 isla-magica ata1.15: SATA link up 3.0 Gbps (SStatus 123
SControl 0)
Nov 9 12:39:18 isla-magica ata1.00: hard resetting port
Nov 9 12:39:19 isla-magica ata1.00: SATA link up 1.5 Gbps (SStatus 113
SControl 300)
Nov 9 12:39:19 isla-magica ata1.01: hard resetting port
Nov 9 12:39:20 isla-magica ata1.01: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
Nov 9 12:39:21 isla-magica ata1.02: hard resetting port
Nov 9 12:39:22 isla-magica ata1.02: SATA link down (SStatus 0 SControl 300)
Nov 9 12:39:22 isla-magica ata1.03: hard resetting port
Nov 9 12:39:23 isla-magica ata1.03: SATA link down (SStatus 0 SControl 300)
Nov 9 12:39:24 isla-magica ata1.04: hard resetting port
Nov 9 12:39:25 isla-magica ata1.04: SATA link down (SStatus 0 SControl 300)
Nov 9 12:39:25 isla-magica ata1.00: configured for UDMA/100
Nov 9 12:39:25 isla-magica ata1.01: configured for UDMA/100
Nov 9 12:39:25 isla-magica ata1: EH pending after completion, repeating
EH (cnt=4)
Nov 9 12:39:25 isla-magica ata1.15: exception Emask 0x10 SAct 0x0 SErr
0x0 action 0x41
Nov 9 12:39:25 isla-magica ata1.15: (irq_stat 0x01900090, PHY RDY changed)
Nov 9 12:39:25 isla-magica ata1: EH complete
Nov 9 12:39:25 isla-magica SCSI device sdd: 976773168 512-byte hdwr
sectors (500108 MB)
Nov 9 12:39:25 isla-magica sdd: Write Protect is off
Nov 9 12:39:25 isla-magica sdd: Mode Sense: 00 3a 00 00
Nov 9 12:39:25 isla-magica SCSI device sdd: drive cache: write back
Nov 9 12:39:25 isla-magica SCSI device sde: 781422768 512-byte hdwr
sectors (400088 MB)
Nov 9 12:39:25 isla-magica sde: Write Protect is off
Nov 9 12:39:25 isla-magica sde: Mode Sense: 00 3a 00 00
Nov 9 12:39:25 isla-magica SCSI device sde: drive cache: write back
Nov 9 12:39:25 isla-magica SCSI device sdd: 976773168 512-byte hdwr
sectors (500108 MB)
Nov 9 12:39:25 isla-magica sdd: Write Protect is off
Nov 9 12:39:25 isla-magica sdd: Mode Sense: 00 3a 00 00
Nov 9 12:39:25 isla-magica SCSI device sdd: drive cache: write back
Nov 9 12:39:25 isla-magica SCSI device sde: 781422768 512-byte hdwr
sectors (400088 MB)
Nov 9 12:39:25 isla-magica sde: Write Protect is off
Nov 9 12:39:25 isla-magica sde: Mode Sense: 00 3a 00 00
Nov 9 12:39:25 isla-magica SCSI device sde: drive cache: write back
</log-hotplug>
and this is bad...
<log-bad>
Nov 9 12:50:40 isla-magica ata1: exception Emask 0x10 SAct 0x0 SErr
0x10000 action 0x42 frozen
Nov 9 12:50:40 isla-magica ata1: (irq_stat 0x00a00080, device exchanged)
Nov 9 12:50:40 isla-magica ata1: waiting for device to spin up (8 secs)
Nov 9 12:50:49 isla-magica ata1: soft resetting port
Nov 9 12:50:57 isla-magica (dschroeder-11893): starting (version
2.14.0), pid 11893 user 'dschroeder'
Nov 9 12:50:57 isla-magica (dschroeder-11893): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only
configuration source at posit
ion 0
Nov 9 12:50:57 isla-magica (dschroeder-11893): Resolved address
"xml:readwrite:/home/dschroeder/.gconf" to a writable configuration
source at position 1
Nov 9 12:50:57 isla-magica (dschroeder-11893): Resolved address
"xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only
configuration source at positi
on 2
Nov 9 12:51:19 isla-magica ata1: softreset failed (timeout)
Nov 9 12:51:19 isla-magica ata1: softreset failed, retrying in 5 secs
Nov 9 12:51:24 isla-magica ata1: hard resetting port
Nov 9 12:51:56 isla-magica ata1: softreset failed (timeout)
Nov 9 12:51:56 isla-magica ata1: follow-up softreset failed, retrying
in 5 secs
Nov 9 12:52:01 isla-magica ata1: hard resetting port
Nov 9 12:52:33 isla-magica ata1: softreset failed (timeout)
Nov 9 12:52:33 isla-magica ata1: reset failed, giving up
Nov 9 12:52:33 isla-magica ata1: EH complete
Nov 9 12:53:12 isla-magica ata1: exception Emask 0x10 SAct 0x0 SErr
0xc0000 action 0x42 frozen
Nov 9 12:53:16 isla-magica ata1: soft resetting port
Nov 9 12:53:16 isla-magica ata1: SATA link down (SStatus 1 SControl 300)
Nov 9 12:53:16 isla-magica ata1: EH complete
Nov 9 12:53:22 isla-magica ata1: exception Emask 0x10 SAct 0x0 SErr
0x10000 action 0x42 frozen
Nov 9 12:53:22 isla-magica ata1: (irq_stat 0x00a00080, device exchanged)
Nov 9 12:53:22 isla-magica hub 1-2:1.0: port 2 disabled by hub (EMI?),
re-enabling...
Nov 9 12:53:22 isla-magica usb 1-2.2: USB disconnect, address 4
Nov 9 12:53:22 isla-magica usb 1-2.2: new low speed USB device using
ehci_hcd and address 7
Nov 9 12:53:22 isla-magica usb 1-2.2: configuration #1 chosen from 1 choice
Nov 9 12:53:22 isla-magica input: HID 0c12:0005 as /class/input/input3
Nov 9 12:53:22 isla-magica input: USB HID v1.00 Joystick [HID
0c12:0005] on usb-0000:00:0a.1-2.2
Nov 9 12:53:22 isla-magica ata1: waiting for device to spin up (8 secs)
Nov 9 12:53:30 isla-magica ata1: soft resetting port
Nov 9 12:54:00 isla-magica ata1: softreset failed (timeout)
Nov 9 12:54:00 isla-magica ata1: softreset failed, retrying in 5 secs
Nov 9 12:54:05 isla-magica ata1: hard resetting port
Nov 9 12:54:15 isla-magica ntpd[11442]: synchronized to 129.174.135.11,
stratum 2
Nov 9 12:54:15 isla-magica ntpd[11442]: kernel time sync enabled 0001
Nov 9 12:54:37 isla-magica ata1: softreset failed (timeout)
Nov 9 12:54:37 isla-magica ata1: follow-up softreset failed, retrying
in 5 secs
Nov 9 12:54:42 isla-magica ata1: hard resetting port
Nov 9 12:54:52 isla-magica hub 1-2:1.0: port 2 disabled by hub (EMI?),
re-enabling...
Nov 9 12:54:52 isla-magica usb 1-2.2: USB disconnect, address 7
Nov 9 12:54:52 isla-magica usb 1-2.2: new low speed USB device using
ehci_hcd and address 8
Nov 9 12:54:52 isla-magica usb 1-2.2: configuration #1 chosen from 1 choice
Nov 9 12:54:52 isla-magica input: HID 0c12:0005 as /class/input/input4
Nov 9 12:54:52 isla-magica input: USB HID v1.00 Joystick [HID
0c12:0005] on usb-0000:00:0a.1-2.2
Nov 9 12:55:15 isla-magica ata1: softreset failed (timeout)
Nov 9 12:55:15 isla-magica ata1: reset failed, giving up
Nov 9 12:55:15 isla-magica ata1: EH complete
</log-bad>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PMP] sil3132 st6600 problem
2006-11-11 1:24 [PMP] sil3132 st6600 problem Daniel Schröder
@ 2006-11-21 6:00 ` Tejun Heo
2006-11-21 8:59 ` Daniel Schröder
0 siblings, 1 reply; 3+ messages in thread
From: Tejun Heo @ 2006-11-21 6:00 UTC (permalink / raw)
To: Daniel Schröder; +Cc: linux-ide
Daniel Schröder wrote:
> Hello *,
>
> a couple of weeks ago, i posted a "success" message. This time i have a
> strange issue to report. A couple of weeks, with only one Samsung
> HD401LJ and everything was fine. Yesterday, i put another drive a
> Samsung HD501LJ into the second bay and shortly after this. (After FDISK
> and MKFS and a couple of powercycles) The device is completely
> unresponsive. With this device on, Windows XP freezes instantly...Linux
> shows the following at turning on:
>
> And everytime, when i played with this device, he said something about
> USB...WTF?! Same IRQ? I dont think so:
USB messages seem to be power supply related.. If you have another
power supply available, try to use it for disks (using power supply w/o
motherboard isn't difficult. just ask google) or buy a better one.
When PMP detection fails, did you have the first PMP port occupied?
Sil3726/4726 PMPs fail to initialize if the first port isn't occupied.
Dunno if it's those hardware's fault or driver's fault yet.
--
tejun
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PMP] sil3132 st6600 problem
2006-11-21 6:00 ` Tejun Heo
@ 2006-11-21 8:59 ` Daniel Schröder
0 siblings, 0 replies; 3+ messages in thread
From: Daniel Schröder @ 2006-11-21 8:59 UTC (permalink / raw)
To: Tejun Heo; +Cc: linux-ide
Tejun Heo wrote:
> USB messages seem to be power supply related.. If you have another
> power supply available, try to use it for disks (using power supply w/o
> motherboard isn't difficult. just ask google) or buy a better one.
>
> When PMP detection fails, did you have the first PMP port occupied?
> Sil3726/4726 PMPs fail to initialize if the first port isn't occupied.
> Dunno if it's those hardware's fault or driver's fault yet.
>
Powersupply is 530W for one CPU, three internal SATA drives and one
7900GT. I think this should not be an issue.
The USB messages do not seem to be related with the eSATA thing. I have
tested the device for the last time and the USB messages were not there.
This time the "first" port was occupied. Finally, i guess, this device
ST6600 by Stardom/Raidsonic has some "teething problems" and i will send
this device back to the seller.
(If someone has trouble with this device also. The "symptoms":
- Only the first blue led, power on, is active.
- The "drive ready leds" are off even though ports are occupied.
- In the back of the device are several leds. A blue, a red and a green
one are active. May be, there could be a meaning in this.
- If you boot Windows XP with this device connected or you plug in the
device while Windows XP is running. XP instantly freezes and dies.
- Under Linux, the output is the following and unlike to XP the system
stays stable.)
Thank you, for your ideas..
Daniel
<power on/off/on>
ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x42 frozen
ata1: (irq_stat 0x00b00090, PHY RDY changed)
ata1: waiting for device to spin up (8 secs)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.15: failed to read PMP GSCR[0] (errno=-16)
ata1: hard resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.15: failed to read PMP GSCR[0] (errno=-16)
ata1: hard resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.15: failed to read PMP GSCR[0] (errno=-16)
ata1: hard resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: EH complete
ata1: exception Emask 0x10 SAct 0x0 SErr 0x80000 action 0x42 frozen
ata1: (irq_stat 0x01900090, PHY RDY changed)
ata1: soft resetting port
ata1: SATA link down (SStatus 1 SControl 300)
ata1: EH complete
ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x42 frozen
ata1: (irq_stat 0x00b00090, PHY RDY changed)
ata1: waiting for device to spin up (8 secs)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.15: failed to read PMP GSCR[0] (errno=-16)
ata1: hard resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.15: failed to read PMP GSCR[0] (errno=-16)
ata1: hard resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.15: failed to read PMP GSCR[0] (errno=-16)
ata1: hard resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: EH complete
</power on/off/on>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2006-11-21 9:00 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-11-11 1:24 [PMP] sil3132 st6600 problem Daniel Schröder
2006-11-21 6:00 ` Tejun Heo
2006-11-21 8:59 ` Daniel Schröder
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).