From: Tejun Heo <htejun@gmail.com>
To: "Berck E. Nash" <flyboy@gmail.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-ide@vger.kernel.org" <linux-ide@vger.kernel.org>
Subject: Re: 2.6.18 - AHCI detection pauses excessively
Date: Fri, 01 Dec 2006 16:07:55 +0900 [thread overview]
Message-ID: <456FD4CB.8020608@gmail.com> (raw)
In-Reply-To: <456DD70D.1050808@gmail.com>
Berck E. Nash wrote:
> [ 68.242305] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 98.221334] ata2.00: qc timeout (cmd 0xec)
> [ 98.225467] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
> [ 108.063137] ata2: port is slow to respond, please be patient (Status 0x80)
> [ 131.003980] ata2: port failed to respond (30 secs, Status 0x80)
> [ 131.009930] ata2: COMRESET failed (device not ready)
> [ 131.014926] ata2: hardreset failed, retrying in 5 secs
> [ 138.308717] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 138.319554] ata2.00: ATA-6, max UDMA/133, 640 sectors: LBA
> [ 138.325157] ata2.00: ata2: dev 0 multi count 1
> [ 138.334245] ata2.00: configured for UDMA/133
[--snip--]
> [ 143.191590] scsi 2:0:0:0: Direct-Access ATA Config Disk RGL1 PQ: 0 ANSI: 5
> [ 143.199761] SCSI device sdd: 640 512-byte hdwr sectors (0 MB)
> [ 143.205550] sdd: Write Protect is off
> [ 143.209257] SCSI device sdd: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> [ 143.218356] SCSI device sdd: 640 512-byte hdwr sectors (0 MB)
> [ 143.224143] sdd: Write Protect is off
> [ 143.227847] SCSI device sdd: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> [ 143.236927] sdd: unknown partition table
> [ 143.241194] sd 2:0:0:0: Attached scsi disk sdd
> [ 143.245707] sd 2:0:0:0: Attached scsi generic sg3 type 0
Ahh.. I can't believe I missed this again. A Port Multiplier is
attached to your ata2 which is probably a sil3726 or 4726. Why this
device fails initial reset is unknown yet. Anyways, with proper PMP
support, this problem will go away. So, this isn't really a ahci issue
and there's nothing wrong with your disks either. I'll ask SIMG why
this happens with the PMP.
--
tejun
next prev parent reply other threads:[~2006-12-01 7:08 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4557B7D2.2050004@gmail.com>
[not found] ` <455B0BD7.20108@gmail.com>
[not found] ` <455B5ADF.2040503@gmail.com>
[not found] ` <20061127033550.GB11250@htj.dyndns.org>
[not found] ` <456AA89C.909@gmail.com>
2006-11-29 8:55 ` 2.6.18 - AHCI detection pauses excessively Tejun Heo
2006-11-29 18:53 ` Berck E. Nash
2006-11-29 19:27 ` Mark Lord
2006-12-01 7:07 ` Tejun Heo [this message]
2006-12-01 13:35 ` Berck E. Nash
2006-12-01 13:59 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=456FD4CB.8020608@gmail.com \
--to=htejun@gmail.com \
--cc=flyboy@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).