* Re: SATA Promise
@ 2006-12-19 17:38 Mikael Pettersson
2006-12-19 18:19 ` Gary Thomas
2007-01-08 16:46 ` Gary Thomas
0 siblings, 2 replies; 8+ messages in thread
From: Mikael Pettersson @ 2006-12-19 17:38 UTC (permalink / raw)
To: gary, jgarzik; +Cc: linux-ide
On Tue, 19 Dec 2006 08:54:07 -0700, Gary Thomas wrote:
> I'm trying to use the sata_promise driver (1.04) with a CDROM
> and having little luck. I'm using this chipset:
> 00:0b.0 Mass storage controller: Promise Technology, Inc. PDC40775 (SATA 300 TX2plus) (rev 02)
>
> If I plug in a SATAPI drive, the driver hangs during initialization.
> If I plug in a (PATA) ATAPI drive, I'm told:
>
> ata3.01: ATAPI, max MWDMA2
> ata3.01: configured for MWDMA2
> Vendor: ATA Model: ST3250824NS Rev: 3.AE
> Type: Direct-Access ANSI SCSI revision: 05
> ata3.01: WARNING: ATAPI is not supported with this driver, device ignored.
>
> Is there any way to get this working (I'm using Linux 2.6.18, with
> linux-2.6-sata-promise-pata-ports.patch from Fedora Core 6)
Patience. The driver doesn't support ATAPI yet, but I
intend to work on that soon.
/Mikael
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: SATA Promise
2006-12-19 17:38 SATA Promise Mikael Pettersson
@ 2006-12-19 18:19 ` Gary Thomas
2007-01-08 16:46 ` Gary Thomas
1 sibling, 0 replies; 8+ messages in thread
From: Gary Thomas @ 2006-12-19 18:19 UTC (permalink / raw)
To: Mikael Pettersson; +Cc: jgarzik, linux-ide
Mikael Pettersson wrote:
> On Tue, 19 Dec 2006 08:54:07 -0700, Gary Thomas wrote:
>> I'm trying to use the sata_promise driver (1.04) with a CDROM
>> and having little luck. I'm using this chipset:
>> 00:0b.0 Mass storage controller: Promise Technology, Inc. PDC40775 (SATA 300 TX2plus) (rev 02)
>>
>> If I plug in a SATAPI drive, the driver hangs during initialization.
>> If I plug in a (PATA) ATAPI drive, I'm told:
>>
>> ata3.01: ATAPI, max MWDMA2
>> ata3.01: configured for MWDMA2
>> Vendor: ATA Model: ST3250824NS Rev: 3.AE
>> Type: Direct-Access ANSI SCSI revision: 05
>> ata3.01: WARNING: ATAPI is not supported with this driver, device ignored.
>>
>> Is there any way to get this working (I'm using Linux 2.6.18, with
>> linux-2.6-sata-promise-pata-ports.patch from Fedora Core 6)
>
> Patience. The driver doesn't support ATAPI yet, but I
> intend to work on that soon.
Any idea how long this might be (just wondering - I can work
around this for the time being)?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: SATA Promise
2006-12-19 17:38 SATA Promise Mikael Pettersson
2006-12-19 18:19 ` Gary Thomas
@ 2007-01-08 16:46 ` Gary Thomas
2007-01-08 17:01 ` Jeff Garzik
2007-01-08 17:02 ` Mikael Pettersson
1 sibling, 2 replies; 8+ messages in thread
From: Gary Thomas @ 2007-01-08 16:46 UTC (permalink / raw)
To: Mikael Pettersson; +Cc: jgarzik, linux-ide
Mikael Pettersson wrote:
> On Tue, 19 Dec 2006 08:54:07 -0700, Gary Thomas wrote:
>
>> I'm trying to use the sata_promise driver (1.04) with a CDROM
>> and having little luck. I'm using this chipset:
>> 00:0b.0 Mass storage controller: Promise Technology, Inc. PDC40775 (SATA 300 TX2plus) (rev 02)
>>
>> If I plug in a SATAPI drive, the driver hangs during initialization.
>> If I plug in a (PATA) ATAPI drive, I'm told:
>>
>> ata3.01: ATAPI, max MWDMA2
>> ata3.01: configured for MWDMA2
>> Vendor: ATA Model: ST3250824NS Rev: 3.AE
>> Type: Direct-Access ANSI SCSI revision: 05
>> ata3.01: WARNING: ATAPI is not supported with this driver, device ignored.
>>
>> Is there any way to get this working (I'm using Linux 2.6.18, with
>> linux-2.6-sata-promise-pata-ports.patch from Fedora Core 6)
>>
>
> Patience. The driver doesn't support ATAPI yet, but I
> intend to work on that soon.
>
>
Any progress on this?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: SATA Promise
2007-01-08 16:46 ` Gary Thomas
@ 2007-01-08 17:01 ` Jeff Garzik
2007-01-08 17:02 ` Mikael Pettersson
1 sibling, 0 replies; 8+ messages in thread
From: Jeff Garzik @ 2007-01-08 17:01 UTC (permalink / raw)
To: Gary Thomas; +Cc: Mikael Pettersson, linux-ide
Gary Thomas wrote:
> Mikael Pettersson wrote:
>> On Tue, 19 Dec 2006 08:54:07 -0700, Gary Thomas wrote:
>>
>>> I'm trying to use the sata_promise driver (1.04) with a CDROM
>>> and having little luck. I'm using this chipset:
>>> 00:0b.0 Mass storage controller: Promise Technology, Inc. PDC40775
>>> (SATA 300 TX2plus) (rev 02)
>>>
>>> If I plug in a SATAPI drive, the driver hangs during initialization.
>>> If I plug in a (PATA) ATAPI drive, I'm told:
>>>
>>> ata3.01: ATAPI, max MWDMA2
>>> ata3.01: configured for MWDMA2
>>> Vendor: ATA Model: ST3250824NS Rev: 3.AE
>>> Type: Direct-Access ANSI SCSI revision: 05
>>> ata3.01: WARNING: ATAPI is not supported with this driver, device
>>> ignored.
>>>
>>> Is there any way to get this working (I'm using Linux 2.6.18, with
>>> linux-2.6-sata-promise-pata-ports.patch from Fedora Core 6)
>>>
>>
>> Patience. The driver doesn't support ATAPI yet, but I
>> intend to work on that soon.
>>
>>
> Any progress on this?
He already posted patches, check the linux-ide archives :)
Jeff
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: SATA Promise
2007-01-08 16:46 ` Gary Thomas
2007-01-08 17:01 ` Jeff Garzik
@ 2007-01-08 17:02 ` Mikael Pettersson
2007-01-08 17:06 ` Gary Thomas
1 sibling, 1 reply; 8+ messages in thread
From: Mikael Pettersson @ 2007-01-08 17:02 UTC (permalink / raw)
To: Gary Thomas; +Cc: jgarzik, linux-ide
Gary Thomas writes:
> Mikael Pettersson wrote:
> > On Tue, 19 Dec 2006 08:54:07 -0700, Gary Thomas wrote:
> >
> >> I'm trying to use the sata_promise driver (1.04) with a CDROM
> >> and having little luck. I'm using this chipset:
> >> 00:0b.0 Mass storage controller: Promise Technology, Inc. PDC40775 (SATA 300 TX2plus) (rev 02)
> >>
> >> If I plug in a SATAPI drive, the driver hangs during initialization.
> >> If I plug in a (PATA) ATAPI drive, I'm told:
> >>
> >> ata3.01: ATAPI, max MWDMA2
> >> ata3.01: configured for MWDMA2
> >> Vendor: ATA Model: ST3250824NS Rev: 3.AE
> >> Type: Direct-Access ANSI SCSI revision: 05
> >> ata3.01: WARNING: ATAPI is not supported with this driver, device ignored.
> >>
> >> Is there any way to get this working (I'm using Linux 2.6.18, with
> >> linux-2.6-sata-promise-pata-ports.patch from Fedora Core 6)
> >>
> >
> > Patience. The driver doesn't support ATAPI yet, but I
> > intend to work on that soon.
> >
> >
> Any progress on this?
Yes. SATAPI and PATAPI are working. Patches have been posted
to linux-ide, and hopefully final combined/reworked/tidied-up
patches should be available tomorrow.
/Mikael
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: SATA Promise
2007-01-08 17:02 ` Mikael Pettersson
@ 2007-01-08 17:06 ` Gary Thomas
0 siblings, 0 replies; 8+ messages in thread
From: Gary Thomas @ 2007-01-08 17:06 UTC (permalink / raw)
To: Mikael Pettersson; +Cc: jgarzik, linux-ide
Mikael Pettersson wrote:
> Gary Thomas writes:
> > Mikael Pettersson wrote:
> > > On Tue, 19 Dec 2006 08:54:07 -0700, Gary Thomas wrote:
> > >
> > >> I'm trying to use the sata_promise driver (1.04) with a CDROM
> > >> and having little luck. I'm using this chipset:
> > >> 00:0b.0 Mass storage controller: Promise Technology, Inc. PDC40775 (SATA 300 TX2plus) (rev 02)
> > >>
> > >> If I plug in a SATAPI drive, the driver hangs during initialization.
> > >> If I plug in a (PATA) ATAPI drive, I'm told:
> > >>
> > >> ata3.01: ATAPI, max MWDMA2
> > >> ata3.01: configured for MWDMA2
> > >> Vendor: ATA Model: ST3250824NS Rev: 3.AE
> > >> Type: Direct-Access ANSI SCSI revision: 05
> > >> ata3.01: WARNING: ATAPI is not supported with this driver, device ignored.
> > >>
> > >> Is there any way to get this working (I'm using Linux 2.6.18, with
> > >> linux-2.6-sata-promise-pata-ports.patch from Fedora Core 6)
> > >>
> > >
> > > Patience. The driver doesn't support ATAPI yet, but I
> > > intend to work on that soon.
> > >
> > >
> > Any progress on this?
>
> Yes. SATAPI and PATAPI are working. Patches have been posted
> to linux-ide, and hopefully final combined/reworked/tidied-up
> patches should be available tomorrow.
Very nice, thanks.
BTW, what SATAPI drive did you try this with? I have a Lite-On
LTN-52S1S that doesn't seem to work at all with the PDC40775 - it
just hangs during the bootup.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: SATA Promise
@ 2007-01-09 9:58 Mikael Pettersson
0 siblings, 0 replies; 8+ messages in thread
From: Mikael Pettersson @ 2007-01-09 9:58 UTC (permalink / raw)
To: gary; +Cc: jgarzik, linux-ide
On Mon, 08 Jan 2007 10:06:49 -0700, Gary Thomas wrote:
> > Yes. SATAPI and PATAPI are working. Patches have been posted
> > to linux-ide, and hopefully final combined/reworked/tidied-up
> > patches should be available tomorrow.
>
> Very nice, thanks.
>
> BTW, what SATAPI drive did you try this with? I have a Lite-On
> LTN-52S1S that doesn't seem to work at all with the PDC40775 - it
> just hangs during the bootup.
I tested SATAPI with a Samsung DVD-writer. I don't have
the exact model # handy, but the OEM appears to be Toshiba.
PATAPI was tested with a Phillips CD-writer.
/Mikael
^ permalink raw reply [flat|nested] 8+ messages in thread
* SATA Promise
@ 2006-12-19 15:54 Gary Thomas
0 siblings, 0 replies; 8+ messages in thread
From: Gary Thomas @ 2006-12-19 15:54 UTC (permalink / raw)
To: Jeff Garzik; +Cc: linux-ide
I'm trying to use the sata_promise driver (1.04) with a CDROM
and having little luck. I'm using this chipset:
00:0b.0 Mass storage controller: Promise Technology, Inc. PDC40775 (SATA 300 TX2plus) (rev 02)
If I plug in a SATAPI drive, the driver hangs during initialization.
If I plug in a (PATA) ATAPI drive, I'm told:
ata3.01: ATAPI, max MWDMA2
ata3.01: configured for MWDMA2
Vendor: ATA Model: ST3250824NS Rev: 3.AE
Type: Direct-Access ANSI SCSI revision: 05
ata3.01: WARNING: ATAPI is not supported with this driver, device ignored.
Is there any way to get this working (I'm using Linux 2.6.18, with
linux-2.6-sata-promise-pata-ports.patch from Fedora Core 6)
Thanks for any help/pointers
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2007-01-09 9:58 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-12-19 17:38 SATA Promise Mikael Pettersson
2006-12-19 18:19 ` Gary Thomas
2007-01-08 16:46 ` Gary Thomas
2007-01-08 17:01 ` Jeff Garzik
2007-01-08 17:02 ` Mikael Pettersson
2007-01-08 17:06 ` Gary Thomas
-- strict thread matches above, loose matches on Subject: below --
2007-01-09 9:58 Mikael Pettersson
2006-12-19 15:54 Gary Thomas
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).