From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michael Bueker Subject: Re: No DMA with HTP370 IDE controller Date: Wed, 10 Jan 2007 17:20:41 +0100 Message-ID: <45A51259.2020904@berlin.de> References: <45A29690.3040003@berlin.de> <58cb370e0701081155j7376d15dv32e3b65906c8d325@mail.gmail.com> <45A35A8C.9040200@berlin.de> <58cb370e0701090544p2a851182m30f24e0fdd86f328@mail.gmail.com> <45A435A3.2020506@berlin.de> <45A4DAED.9070404@ru.mvista.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from sour.ops.eusc.inter.net ([84.23.254.154]:59656 "EHLO sour.ops.eusc.inter.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S964932AbXAJQVY (ORCPT ); Wed, 10 Jan 2007 11:21:24 -0500 In-Reply-To: <45A4DAED.9070404@ru.mvista.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Cc: Sergei Shtylyov , Bartlomiej Zolnierkiewicz Sergei Shtylyov wrote: > Then it's probably the same issue as here: > > http://bugzilla.kernel.org/show_bug.cgi?id=7703 > > What's really strange is that my HPT370 is working fine. However, > the chip marking says it's HPT370A despite the revision ID is 3 (which > should correspond to HPT370)... Unfortunately, I'm unable to compile a 2.4.18 kernel (my gcc is probably too new) for testing. But anyways - do you think there's hope for fixing this? If I can provide you with any more helpful information, please tell me. My controller is: http://www.michael-bueker.de/files/hpt370/ 01:09.0 Mass storage controller: Triones Technologies, Inc. HPT366/368/370/370A/372/372N (rev 03) Subsystem: Triones Technologies, Inc. HPT370 UDMA100 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR-