From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tejun Heo Subject: Re: sata-nv hotplug feature Date: Thu, 08 Mar 2007 17:21:01 +0900 Message-ID: <45EFC76D.9020408@gmail.com> References: <200703072039.18588.rweeks@razorwire.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: Received: from wr-out-0506.google.com ([64.233.184.228]:5765 "EHLO wr-out-0506.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1030228AbXCHIVB (ORCPT ); Thu, 8 Mar 2007 03:21:01 -0500 Received: by wr-out-0506.google.com with SMTP id 58so717225wri for ; Thu, 08 Mar 2007 00:21:01 -0800 (PST) In-Reply-To: <200703072039.18588.rweeks@razorwire.ca> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: rweeks@razorwire.ca Cc: linux-ide@vger.kernel.org Russ Weeks wrote: > uname -a: > Linux backfire 2.6.19.2-smp #2 SMP Sat Mar 3 13:06:28 PST 2007 x86_64 x86_64 > x86_64 GNU/Linux > > lspci shows this: > 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) > 00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) > 00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) > > lsmod shows that libata and sata-nv are present. > > rescan-scsi-bus.sh shows this (after I boot with 1 drive plugged in and then > try to plug in the other 2): > OLD: Host: scsi2 Channel: 00 Id: 00 Lun: 00 > Vendor: ATA Model: ST3250824AS Rev: 3.AA > Type: Direct-Access ANSI SCSI revision: 05 > > (this seems correct, just that 2 other drives are missing) > > The hardware is a Tyan Thunder K8W 2895 motherboard with an onboard > controller. 3 250Gb Seagate Barracudas are attached, 2 are in removable > drive trays made by some company called 'ByteCC'. I suppose it isn't a CK804 as just pluggin/unplugging should work on it. Rescanning should do the job tho. Can you post the result of 'dmesg' after boot? -- tejun