Re: Sata marvel kernel module

[Pillar Engineering <pillar@fastwebnet.it>]

Thank you very much for your answer, but I don't understand.

It this moment I use the Vanilla kernel (2.6.20.1) and I can work with
the first two sata ports on the controller. Do you mean is not the
sata_mv module wich permit this?
Where I can find your patch?

Thanks

Pillar Engineering
di Sanfelici Claudio
Via Cardinal Ferrari 23 / B
Cernusco sul Naviglio - MI
P.Iva 05403820961
Cell. +39 333.14.27.805
E-Mail pillar@fastwebnet.it



Jeff Garzik ha scritto:
> Pillar Engineering wrote:
>> Hi, i'm working in a project and I use the  Marvell 88SE6145 sata 
>> controller.
>> I use the sata_mv module for the linux kernel and, untill now, 
>> version 2.6.20.1, it supports only the first two ports on the 
>> controller.
>
> sata_mv does not support your hardware at all.  The PCI ID is not 
> present, so it won't even load for your hardware without modification.
>
> For the time being, look around for the ahci.c patch I posted, which 
> enables the SATA portion of the 6145.
>
>     Jeff
>
>
>
>