From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pillar Engineering Subject: Re: Sata marvel kernel module Date: Thu, 08 Mar 2007 15:18:22 +0000 Message-ID: <45F0293E.1020303@fastwebnet.it> References: <45EFDE3C.3090604@fastwebnet.it> <45EFDFC6.2070100@garzik.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from aa012msr.fastwebnet.it ([85.18.95.72]:55810 "EHLO aa012msr.fastwebnet.it" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752103AbXCHPRA (ORCPT ); Thu, 8 Mar 2007 10:17:00 -0500 Received: from [2.255.65.193] (2.255.65.193) by aa012msr.fastwebnet.it (7.3.105.6) (authenticated as claudiopietro.sanfelici) id 45E84A47004EAE7E for linux-ide@vger.kernel.org; Thu, 8 Mar 2007 16:16:54 +0100 In-Reply-To: <45EFDFC6.2070100@garzik.org> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Thank you very much for your answer, but I don't understand. It this moment I use the Vanilla kernel (2.6.20.1) and I can work with the first two sata ports on the controller. Do you mean is not the sata_mv module wich permit this? Where I can find your patch? Thanks Pillar Engineering di Sanfelici Claudio Via Cardinal Ferrari 23 / B Cernusco sul Naviglio - MI P.Iva 05403820961 Cell. +39 333.14.27.805 E-Mail pillar@fastwebnet.it Jeff Garzik ha scritto: > Pillar Engineering wrote: >> Hi, i'm working in a project and I use the Marvell 88SE6145 sata >> controller. >> I use the sata_mv module for the linux kernel and, untill now, >> version 2.6.20.1, it supports only the first two ports on the >> controller. > > sata_mv does not support your hardware at all. The PCI ID is not > present, so it won't even load for your hardware without modification. > > For the time being, look around for the ahci.c patch I posted, which > enables the SATA portion of the 6145. > > Jeff > > > >