* [PATCH] pata_ns87410: cable detect method
@ 2007-03-07 16:22 Alan Cox
2007-03-09 12:25 ` Jeff Garzik
0 siblings, 1 reply; 2+ messages in thread
From: Alan Cox @ 2007-03-07 16:22 UTC (permalink / raw)
To: akpm, jgarzik, linux-ide
Signed-off-by: Alan Cox <alan@redhat.com>
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.21-rc2-mm2/drivers/ata/pata_ns87410.c linux-2.6.21-rc2-mm2/drivers/ata/pata_ns87410.c
--- linux.vanilla-2.6.21-rc2-mm2/drivers/ata/pata_ns87410.c 2007-03-06 23:09:46.000000000 +0000
+++ linux-2.6.21-rc2-mm2/drivers/ata/pata_ns87410.c 2007-03-06 23:36:02.000000000 +0000
@@ -28,13 +28,13 @@
#include <linux/libata.h>
#define DRV_NAME "pata_ns87410"
-#define DRV_VERSION "0.4.3"
+#define DRV_VERSION "0.4.6"
/**
* ns87410_pre_reset - probe begin
* @ap: ATA port
*
- * Set up cable type and use generic probe init
+ * Check enabled ports
*/
static int ns87410_pre_reset(struct ata_port *ap)
@@ -47,7 +47,6 @@
if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no]))
return -ENOENT;
- ap->cbl = ATA_CBL_PATA40;
return ata_std_prereset(ap);
}
@@ -177,6 +176,7 @@
.thaw = ata_bmdma_thaw,
.error_handler = ns87410_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = ata_cable_40wire,
.qc_prep = ata_qc_prep,
.qc_issue = ns87410_qc_issue_prot,
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH] pata_ns87410: cable detect method
2007-03-07 16:22 [PATCH] pata_ns87410: cable detect method Alan Cox
@ 2007-03-09 12:25 ` Jeff Garzik
0 siblings, 0 replies; 2+ messages in thread
From: Jeff Garzik @ 2007-03-09 12:25 UTC (permalink / raw)
To: Alan Cox; +Cc: akpm, linux-ide
Alan Cox wrote:
> Signed-off-by: Alan Cox <alan@redhat.com>
>
> diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.21-rc2-mm2/drivers/ata/pata_ns87410.c linux-2.6.21-rc2-mm2/drivers/ata/pata_ns87410.c
> --- linux.vanilla-2.6.21-rc2-mm2/drivers/ata/pata_ns87410.c 2007-03-06 23:09:46.000000000 +0000
> +++ linux-2.6.21-rc2-mm2/drivers/ata/pata_ns87410.c 2007-03-06 23:36:02.000000000 +0000
> @@ -28,13 +28,13 @@
> #include <linux/libata.h>
>
> #define DRV_NAME "pata_ns87410"
> -#define DRV_VERSION "0.4.3"
> +#define DRV_VERSION "0.4.6"
>
> /**
> * ns87410_pre_reset - probe begin
> * @ap: ATA port
> *
> - * Set up cable type and use generic probe init
> + * Check enabled ports
> */
>
> static int ns87410_pre_reset(struct ata_port *ap)
> @@ -47,7 +47,6 @@
>
> if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no]))
> return -ENOENT;
> - ap->cbl = ATA_CBL_PATA40;
> return ata_std_prereset(ap);
> }
>
> @@ -177,6 +176,7 @@
> .thaw = ata_bmdma_thaw,
> .error_handler = ns87410_error_handler,
> .post_internal_cmd = ata_bmdma_post_internal_cmd,
> + .cable_detect = ata_cable_40wire,
>
> .qc_prep = ata_qc_prep,
> .qc_issue = ns87410_qc_issue_prot,
applied, as part of a jumbo ->cable_detect patch, since this patch
contained changes highly similar to others it was applied alongside.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-03-09 12:25 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-03-07 16:22 [PATCH] pata_ns87410: cable detect method Alan Cox
2007-03-09 12:25 ` Jeff Garzik
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).