From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jeff Garzik Subject: Re: [PATCH] pata_ns87410: cable detect method Date: Fri, 09 Mar 2007 07:25:49 -0500 Message-ID: <45F1524D.40705@pobox.com> References: <20070307162207.049af79d@lxorguk.ukuu.org.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from srv5.dvmed.net ([207.36.208.214]:55430 "EHLO mail.dvmed.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1422959AbXCIMZw (ORCPT ); Fri, 9 Mar 2007 07:25:52 -0500 In-Reply-To: <20070307162207.049af79d@lxorguk.ukuu.org.uk> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Alan Cox Cc: akpm@osdl.org, linux-ide@vger.kernel.org Alan Cox wrote: > Signed-off-by: Alan Cox > > diff -u --new-file --recursive --exclude-from /usr/src/exclude linux.vanilla-2.6.21-rc2-mm2/drivers/ata/pata_ns87410.c linux-2.6.21-rc2-mm2/drivers/ata/pata_ns87410.c > --- linux.vanilla-2.6.21-rc2-mm2/drivers/ata/pata_ns87410.c 2007-03-06 23:09:46.000000000 +0000 > +++ linux-2.6.21-rc2-mm2/drivers/ata/pata_ns87410.c 2007-03-06 23:36:02.000000000 +0000 > @@ -28,13 +28,13 @@ > #include > > #define DRV_NAME "pata_ns87410" > -#define DRV_VERSION "0.4.3" > +#define DRV_VERSION "0.4.6" > > /** > * ns87410_pre_reset - probe begin > * @ap: ATA port > * > - * Set up cable type and use generic probe init > + * Check enabled ports > */ > > static int ns87410_pre_reset(struct ata_port *ap) > @@ -47,7 +47,6 @@ > > if (!pci_test_config_bits(pdev, &ns87410_enable_bits[ap->port_no])) > return -ENOENT; > - ap->cbl = ATA_CBL_PATA40; > return ata_std_prereset(ap); > } > > @@ -177,6 +176,7 @@ > .thaw = ata_bmdma_thaw, > .error_handler = ns87410_error_handler, > .post_internal_cmd = ata_bmdma_post_internal_cmd, > + .cable_detect = ata_cable_40wire, > > .qc_prep = ata_qc_prep, > .qc_issue = ns87410_qc_issue_prot, applied, as part of a jumbo ->cable_detect patch, since this patch contained changes highly similar to others it was applied alongside.