From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Mat=ED=ADas_Alejandro_Torres?= Subject: Re: SATA SB600 works in 2.6.20.4 but not in 2.6.21-rc5 with irqpoll parameter Date: Tue, 27 Mar 2007 01:00:24 -0300 Message-ID: <460896D8.8040203@gmail.com> References: <4608807F.6040202@gmail.com> <4608820D.2000203@gmail.com> <46088328.8070601@gmail.com> <460883FB.1030000@gmail.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------000408040105040707030000" Return-path: Received: from an-out-0708.google.com ([209.85.132.248]:31981 "EHLO an-out-0708.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932848AbXC0EAr (ORCPT ); Tue, 27 Mar 2007 00:00:47 -0400 Received: by an-out-0708.google.com with SMTP id b33so2591092ana for ; Mon, 26 Mar 2007 21:00:46 -0700 (PDT) In-Reply-To: <460883FB.1030000@gmail.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Tejun Heo Cc: linux-ide@vger.kernel.org This is a multi-part message in MIME format. --------------000408040105040707030000 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 8bit > Can you try with kernel parameter 'acpi=noirq' or 'irqpoll'? I made a typo when passing the irqpoll parameter to the kernel. In kernel 2.6.20.4 with the irqpoll parameter passewd to kernel the SATA disk works: [ 1.320000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.320000] ahci 0000:00:12.0: version 2.0 [ 1.320000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 16 [ 2.324000] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.324000] ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part [ 2.324000] ata1: SATA max UDMA/133 cmd 0xF8824D00 ctl 0x0 bmdma 0x0 irq 222 [ 2.324000] ata2: SATA max UDMA/133 cmd 0xF8824D80 ctl 0x0 bmdma 0x0 irq 222 [ 2.324000] ata3: SATA max UDMA/133 cmd 0xF8824E00 ctl 0x0 bmdma 0x0 irq 222 [ 2.324000] ata4: SATA max UDMA/133 cmd 0xF8824E80 ctl 0x0 bmdma 0x0 irq 222 [ 2.324000] scsi0 : ahci [ 2.636000] ata1: SATA link down (SStatus 0 SControl 300) [ 2.636000] scsi1 : ahci [ 3.120000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.136000] ata2.00: ATA-7, max UDMA/133, 160836480 sectors: LBA48 NCQ (depth 31/32) [ 3.136000] ata2.00: ata2: dev 0 multi count 16 [ 3.144000] ata2.00: configured for UDMA/133 [ 3.144000] scsi2 : ahci [ 3.456000] ata3: SATA link down (SStatus 0 SControl 300) [ 3.456000] scsi3 : ahci [ 3.768000] ata4: SATA link down (SStatus 0 SControl 300) [ 3.768000] scsi 1:0:0:0: Direct-Access ATA HDS728080PLA380 PF2O PQ: 0 ANSI: 5 [ 3.768000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 3.768000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.768000] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.768000] mice: PS/2 mouse device common for all mice [ 3.768000] EISA: Probing bus 0 at eisa.0 [ 3.768000] EISA: Detected 0 cards. [ 3.792000] input: AT Translated Set 2 keyboard as /class/input/input0 [ 3.800000] TCP cubic registered [ 3.800000] NET: Registered protocol family 1 [ 3.800000] Starting balanced_irq [ 3.800000] Using IPI No-Shortcut mode [ 3.800000] ACPI: (supports S0 S1 S3 S4 S5) [ 3.800000] Freeing unused kernel memory: 316k freed [ 3.804000] Time: hpet clocksource has been installed. [ 3.876000] ACPI: duty_cycle spans bit 4 [ 4.268000] SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) [ 4.268000] sda: Write Protect is off [ 4.268000] sda: Mode Sense: 00 3a 00 00 [ 4.268000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.268000] SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) [ 4.268000] sda: Write Protect is off [ 4.268000] sda: Mode Sense: 00 3a 00 00 [ 4.268000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.268000] sda: sda1 [ 4.292000] sd 1:0:0:0: Attached scsi disk sda And the disk (lshw): *-storage description: SATA controller product: SB600 Non-Raid-5 SATA vendor: ATI Technologies Inc physical id: 12 bus info: pci@00:12.0 logical name: scsi1 version: 00 width: 32 bits clock: 66MHz capabilities: storage ahci_1.0 bus_master cap_list emulated configuration: driver=ahci resources: ioport:e800-e807 ioport:e400-e403 ioport:e000-e007 ioport:dc00-dc03 ioport:d800-d80f iomemory:febffc00-febfffff irq:222 *-disk description: SCSI Disk product: HDS728080PLA380 vendor: ATA physical id: 0.0.0 bus info: scsi@1:0.0.0 logical name: /dev/sda version: PF2O serial: PFDH37SYTWKR9E size: 76GB capabilities: partitioned partitioned:dos configuration: ansiversion=5 Nice isn't it? I'm happy. In the 2.6.21-rc5 version this hasn't worked (the typo was here too, copy, paste & destroy :P). Here's is the output of dmesg: [ 1.336000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.340000] ahci 0000:00:12.0: version 2.1 [ 1.340000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 16 [ 2.344000] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.344000] ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part [ 2.344000] ata1: SATA max UDMA/133 cmd 0xf8824d00 ctl 0x00000000 bmdma 0x00000000 irq 222 [ 2.344000] ata2: SATA max UDMA/133 cmd 0xf8824d80 ctl 0x00000000 bmdma 0x00000000 irq 222 [ 2.344000] ata3: SATA max UDMA/133 cmd 0xf8824e00 ctl 0x00000000 bmdma 0x00000000 irq 222 [ 2.344000] ata4: SATA max UDMA/133 cmd 0xf8824e80 ctl 0x00000000 bmdma 0x00000000 irq 222 [ 2.344000] scsi0 : ahci [ 2.656000] ata1: SATA link down (SStatus 0 SControl 300) [ 2.656000] scsi1 : ahci [ 3.140000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 33.140000] ata2.00: qc timeout (cmd 0xec) [ 33.140000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104) [ 34.120000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 64.120000] ata2.00: qc timeout (cmd 0xec) [ 64.120000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104) [ 64.120000] ata2.00: limiting speed to UDMA7:PIO5 [ 65.100000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 95.100000] ata2.00: qc timeout (cmd 0xec) [ 95.100000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104) [ 96.080000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 96.080000] scsi2 : ahci [ 96.392000] ata3: SATA link down (SStatus 0 SControl 300) [ 96.392000] scsi3 : ahci [ 96.704000] ata4: SATA link down (SStatus 0 SControl 300) [ 96.704000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 96.704000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 96.704000] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 96.704000] mice: PS/2 mouse device common for all mice [ 96.704000] EISA: Probing bus 0 at eisa.0 [ 96.704000] EISA: Detected 0 cards. [ 96.704000] TCP cubic registered [ 96.704000] NET: Registered protocol family 1 [ 96.704000] Starting balanced_irq [ 96.704000] Using IPI No-Shortcut mode [ 96.708000] Freeing unused kernel memory: 332k freed [ 96.724000] input: AT Translated Set 2 keyboard as /class/input/input0 [ 96.780000] ACPI: duty_cycle spans bit 4 [ 97.236000] SB600_PATA: IDE controller at PCI slot 0000:00:14.1 [ 97.240000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17 [ 97.240000] SB600_PATA: chipset revision 0 [ 97.240000] SB600_PATA: not 100% native mode: will probe irqs later [ 97.240000] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA [ 97.240000] Probing IDE interface ide0... [ 97.528000] hda: HDS728080PLAT20, ATA DISK drive [ 97.976000] hdb: ASUS DRW-1608P3S, ATAPI CD/DVD-ROM drive [ 98.032000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 98.052000] hda: max request size: 512KiB [ 98.056000] hda: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(100) [ 98.056000] hda: cache flushes supported [ 98.056000] hda: hda1 hda2 < hda5 hda6 > [ 98.108000] hdb: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache, UDMA(66) [ 98.108000] Uniform CD-ROM driver Revision: 3.20 [ 98.356000] Probing IDE interface ide1... Why this happens? Any clue? I attached those files too so you can take a better look at them. Thanks! Matías --------------000408040105040707030000 Content-Type: text/plain; name="dmesg.2.6.20.4.irqpoll" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.2.6.20.4.irqpoll" [ 0.000000] Linux version 2.6.20.4 (root@matias) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #1 SMP Sat Mar 24 13:19:32 ART 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fec0000 end: 000000003ffc0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000003ffc0000 size: 000000000000e000 end: 000000003ffce000 type: 3 [ 0.000000] copy_e820_map() start: 000000003ffce000 size: 0000000000032000 end: 0000000040000000 type: 4 [ 0.000000] copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable) [ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffce000 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 262080) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262080 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262080 [ 0.000000] On node 0 totalpages: 262080 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32449 pages, LIFO batch:7 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f84e0 [ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x07000604 MSFT 0x00000097) @ 0x3ffc0000 [ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x07000604 MSFT 0x00000097) @ 0x3ffc0200 [ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x07000604 MSFT 0x00000097) @ 0x3ffc0390 [ 0.000000] ACPI: MCFG (v001 A M I OEMMCFG 0x07000604 MSFT 0x00000097) @ 0x3ffc03f0 [ 0.000000] ACPI: WDRT (v001 A M I OEMWDRT 0x07000604 MSFT 0x00000097) @ 0x3ffc0430 [ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x07000604 MSFT 0x00000097) @ 0x3ffce040 [ 0.000000] ACPI: HPET (v001 A M I OEMHPET 0x07000604 MSFT 0x00000097) @ 0x3ffc4250 [ 0.000000] ACPI: SSDT (v001 A M I ACPI2PPC 0x00000001 AMI 0x00000001) @ 0x3ffc4290 [ 0.000000] ACPI: DSDT (v001 AMMR_ AMMR_B36 0x00000b36 INTL 0x20051117) @ 0x00000000 [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:11 APIC version 16 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8000 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000) [ 0.000000] Detected 2000.179 MHz processor. [ 22.317443] Built 1 zonelists. Total pages: 260033 [ 22.317446] Kernel command line: root=/dev/hda5 ro irqpoll [ 22.317459] Misrouted IRQ fixup and polling support enabled [ 22.317461] This may significantly impact system performance [ 22.317571] mapped APIC to ffffd000 (fee00000) [ 22.317574] mapped IOAPIC to ffffc000 (fec00000) [ 22.317576] Enabling fast FPU save and restore... done. [ 22.317579] Enabling unmasked SIMD FPU exception support... done. [ 22.317586] Initializing CPU#0 [ 22.317638] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 22.319942] Console: colour VGA+ 80x25 [ 22.323228] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 22.324041] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 22.344370] Memory: 1029668k/1048320k available (2078k kernel code, 17936k reserved, 958k data, 316k init, 130816k highmem) [ 22.344452] virtual kernel memory layout: [ 22.344453] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 22.344454] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 22.344456] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 22.344457] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 22.344458] .init : 0xc03fe000 - 0xc044d000 ( 316 kB) [ 22.344459] .data : 0xc0307bb4 - 0xc03f76f4 ( 958 kB) [ 22.344460] .text : 0xc0100000 - 0xc0307bb4 (2078 kB) [ 22.344905] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 22.345149] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 22.345408] hpet0: 4 32-bit timers, 14318180 Hz [ 22.346467] Using HPET for base-timer [ 22.425010] Calibrating delay using timer specific routine.. 4009.85 BogoMIPS (lpj=8019714) [ 22.425158] Security Framework v1.0.0 initialized [ 22.425219] SELinux: Disabled at boot. [ 22.425285] Mount-cache hash table entries: 512 [ 22.425462] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f [ 22.425470] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 22.425529] CPU: L2 Cache: 256K (64 bytes/line) [ 22.425586] CPU 0(2) -> Core 0 [ 22.425640] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f [ 22.425649] Compat vDSO mapped to ffffe000. [ 22.425712] Checking 'hlt' instruction... OK. [ 22.441159] SMP alternatives: switching to UP code [ 22.441408] ACPI: Core revision 20060707 [ 22.444005] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02 [ 22.444165] SMP alternatives: switching to SMP code [ 22.444338] Booting processor 1/1 eip 3000 [ 22.454283] Initializing CPU#1 [ 22.532516] Calibrating delay using timer specific routine.. 4000.22 BogoMIPS (lpj=8000442) [ 22.532523] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f [ 22.532529] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 22.532531] CPU: L2 Cache: 256K (64 bytes/line) [ 22.532533] CPU 1(2) -> Core 1 [ 22.532534] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f [ 22.532881] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02 [ 22.533317] Total of 2 processors activated (8010.07 BogoMIPS). [ 22.533516] ENABLING IO-APIC IRQs [ 22.533737] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 22.680517] checking TSC synchronization across 2 CPUs: [ 0.000051] CPU#0 had 136 usecs TSC skew, fixed it up. [ 0.000107] CPU#1 had -136 usecs TSC skew, fixed it up. [ 0.003947] Brought up 2 CPUs [ 0.044808] migration_cost=140 [ 0.045232] NET: Registered protocol family 16 [ 0.045366] EISA bus registered [ 0.045422] ACPI: bus type pci registered [ 0.045485] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved [ 0.045543] PCI: Not using MMCONFIG. [ 0.046366] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2 [ 0.046424] PCI: Using configuration type 1 [ 0.046480] Setting up standard PCI resources [ 0.087854] ACPI: Interpreter enabled [ 0.087914] ACPI: Using IOAPIC for interrupt routing [ 0.088279] Error attaching device data [ 0.088338] Error attaching device data [ 0.088505] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.088563] PCI: Probing PCI hardware (bus 00) [ 0.090772] 0000:00:14.1: trying to change BAR0 from 0000 to 01F0 [ 0.090832] 0000:00:14.1: trying to change BAR1 from 0000 to 03F4 [ 0.090891] 0000:00:14.1: trying to change BAR2 from 0000 to 0170 [ 0.090951] 0000:00:14.1: trying to change BAR3 from 0000 to 0374 [ 0.091286] Boot video device is 0000:01:00.0 [ 0.091482] PCI: Transparent bridge - 0000:00:14.4 [ 0.091565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.114083] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.116956] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.118242] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.119028] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.119818] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.120598] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.121380] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.122161] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled. [ 0.122609] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.123390] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.124123] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.124188] pnp: PnP ACPI init [ 0.128327] pnp: PnP ACPI: found 17 devices [ 0.128388] PnPBIOS: Disabled by ACPI PNP [ 0.128575] SCSI subsystem initialized [ 0.128663] libata version 2.00 loaded. [ 0.128693] PCI: Using ACPI for IRQ routing [ 0.128750] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.137872] NET: Registered protocol family 8 [ 0.137928] NET: Registered protocol family 20 [ 0.138863] pnp: 00:0e: ioport range 0xa00-0xa0f has been reserved [ 0.138922] pnp: 00:0e: ioport range 0x600-0x60f has been reserved [ 0.139192] PCI: Bridge: 0000:00:02.0 [ 0.139247] IO window: disabled. [ 0.139304] MEM window: fa900000-fe9fffff [ 0.139361] PREFETCH window: bff00000-dfefffff [ 0.139419] PCI: Bridge: 0000:00:14.4 [ 0.139475] IO window: b000-bfff [ 0.139533] MEM window: fea00000-feafffff [ 0.139591] PREFETCH window: 50000000-500fffff [ 0.139661] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 0.139714] NET: Registered protocol family 2 [ 0.175689] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.175896] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.177008] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.177578] TCP: Hash tables configured (established 131072 bind 65536) [ 0.177639] TCP reno registered [ 0.187722] checking if image is initramfs... it is [ 0.602396] Freeing initrd memory: 5076k freed [ 0.840000] audit: initializing netlink socket (disabled) [ 0.840000] audit(1174956175.024:1): initialized [ 0.840000] highmem bounce pool size: 64 pages [ 0.840000] VFS: Disk quotas dquot_6.5.1 [ 0.840000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.840000] io scheduler noop registered [ 0.840000] io scheduler anticipatory registered [ 0.840000] io scheduler deadline registered [ 0.840000] io scheduler cfq registered (default) [ 0.940000] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 0.940000] assign_interrupt_mode Found MSI capability [ 0.940000] Allocate Port Service[0000:00:02.0:pcie00] [ 0.940000] isapnp: Scanning for PnP cards... [ 1.292000] isapnp: No Plug & Play device found [ 1.320000] Real Time Clock Driver v1.12ac [ 1.320000] hpet_resources: 0xfed00000 is busy [ 1.320000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.320000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.320000] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.320000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 1.320000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 1.320000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.320000] ahci 0000:00:12.0: version 2.0 [ 1.320000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 16 [ 2.324000] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.324000] ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part [ 2.324000] ata1: SATA max UDMA/133 cmd 0xF8824D00 ctl 0x0 bmdma 0x0 irq 222 [ 2.324000] ata2: SATA max UDMA/133 cmd 0xF8824D80 ctl 0x0 bmdma 0x0 irq 222 [ 2.324000] ata3: SATA max UDMA/133 cmd 0xF8824E00 ctl 0x0 bmdma 0x0 irq 222 [ 2.324000] ata4: SATA max UDMA/133 cmd 0xF8824E80 ctl 0x0 bmdma 0x0 irq 222 [ 2.324000] scsi0 : ahci [ 2.636000] ata1: SATA link down (SStatus 0 SControl 300) [ 2.636000] scsi1 : ahci [ 3.120000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.136000] ata2.00: ATA-7, max UDMA/133, 160836480 sectors: LBA48 NCQ (depth 31/32) [ 3.136000] ata2.00: ata2: dev 0 multi count 16 [ 3.144000] ata2.00: configured for UDMA/133 [ 3.144000] scsi2 : ahci [ 3.456000] ata3: SATA link down (SStatus 0 SControl 300) [ 3.456000] scsi3 : ahci [ 3.768000] ata4: SATA link down (SStatus 0 SControl 300) [ 3.768000] scsi 1:0:0:0: Direct-Access ATA HDS728080PLA380 PF2O PQ: 0 ANSI: 5 [ 3.768000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 3.768000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.768000] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.768000] mice: PS/2 mouse device common for all mice [ 3.768000] EISA: Probing bus 0 at eisa.0 [ 3.768000] EISA: Detected 0 cards. [ 3.792000] input: AT Translated Set 2 keyboard as /class/input/input0 [ 3.800000] TCP cubic registered [ 3.800000] NET: Registered protocol family 1 [ 3.800000] Starting balanced_irq [ 3.800000] Using IPI No-Shortcut mode [ 3.800000] ACPI: (supports S0 S1 S3 S4 S5) [ 3.800000] Freeing unused kernel memory: 316k freed [ 3.804000] Time: hpet clocksource has been installed. [ 3.876000] ACPI: duty_cycle spans bit 4 [ 4.268000] SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) [ 4.268000] sda: Write Protect is off [ 4.268000] sda: Mode Sense: 00 3a 00 00 [ 4.268000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.268000] SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB) [ 4.268000] sda: Write Protect is off [ 4.268000] sda: Mode Sense: 00 3a 00 00 [ 4.268000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.268000] sda: sda1 [ 4.292000] sd 1:0:0:0: Attached scsi disk sda [ 4.516000] SB600_PATA: IDE controller at PCI slot 0000:00:14.1 [ 4.516000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17 [ 4.516000] SB600_PATA: chipset revision 0 [ 4.520000] SB600_PATA: not 100% native mode: will probe irqs later [ 4.520000] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA [ 4.520000] Probing IDE interface ide0... [ 4.808000] hda: HDS728080PLAT20, ATA DISK drive [ 5.256000] hdb: ASUS DRW-1608P3S, ATAPI CD/DVD-ROM drive [ 5.312000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 5.316000] hda: max request size: 512KiB [ 5.328000] hda: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(33) [ 5.328000] hda: cache flushes supported [ 5.328000] hda: hda1 hda2 < hda5 hda6 > [ 5.388000] hdb: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache, UDMA(66) [ 5.392000] Uniform CD-ROM driver Revision: 3.20 [ 5.692000] Probing IDE interface ide1... [ 5.724000] usbcore: registered new interface driver usbfs [ 5.724000] usbcore: registered new interface driver hub [ 5.724000] usbcore: registered new device driver usb [ 5.724000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 5.724000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 5.724000] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 5.724000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 5.724000] ohci_hcd 0000:00:13.0: irq 17, io mem 0xfebfe000 [ 5.784000] usb usb1: configuration #1 chosen from 1 choice [ 5.784000] hub 1-0:1.0: USB hub found [ 5.784000] hub 1-0:1.0: 2 ports detected [ 5.888000] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 18 [ 5.888000] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 5.888000] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2 [ 5.888000] ehci_hcd 0000:00:13.5: debug port 1 [ 5.888000] ehci_hcd 0000:00:13.5: irq 18, io mem 0xfebff800 [ 5.888000] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.888000] usb usb2: configuration #1 chosen from 1 choice [ 5.888000] hub 2-0:1.0: USB hub found [ 5.888000] hub 2-0:1.0: 10 ports detected [ 5.992000] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 19 [ 5.992000] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 5.992000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 5.992000] ohci_hcd 0000:00:13.1: irq 19, io mem 0xfebfd000 [ 6.052000] usb usb3: configuration #1 chosen from 1 choice [ 6.052000] hub 3-0:1.0: USB hub found [ 6.052000] hub 3-0:1.0: 2 ports detected [ 6.156000] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 20 [ 6.156000] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 6.156000] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 6.156000] ohci_hcd 0000:00:13.2: irq 20, io mem 0xfebfc000 [ 6.216000] usb usb4: configuration #1 chosen from 1 choice [ 6.216000] hub 4-0:1.0: USB hub found [ 6.216000] hub 4-0:1.0: 2 ports detected [ 6.320000] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 19 [ 6.320000] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 6.320000] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 6.320000] ohci_hcd 0000:00:13.3: irq 19, io mem 0xfebfb000 [ 6.380000] usb usb5: configuration #1 chosen from 1 choice [ 6.380000] hub 5-0:1.0: USB hub found [ 6.380000] hub 5-0:1.0: 2 ports detected [ 6.484000] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 20 [ 6.484000] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 6.484000] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 6.484000] ohci_hcd 0000:00:13.4: irq 20, io mem 0xfebfa000 [ 6.544000] usb usb6: configuration #1 chosen from 1 choice [ 6.544000] hub 6-0:1.0: USB hub found [ 6.544000] hub 6-0:1.0: 2 ports detected [ 6.716000] Attempting manual resume [ 6.736000] kjournald starting. Commit interval 5 seconds [ 6.736000] EXT3-fs: mounted filesystem with ordered data mode. [ 16.968000] Floppy drive(s): fd0 is 1.44M [ 16.984000] FDC 0 is a post-1991 82077 [ 17.328000] input: PC Speaker as /class/input/input1 [ 17.884000] Linux agpgart interface v0.101 (c) Dave Jones [ 17.900000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 17.904000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 17.952000] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 17.988000] r8169 Gigabit Ethernet driver 2.2LK loaded [ 17.988000] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 17.988000] eth0: RTL8169sc/8110sc at 0xf8896800, 00:16:17:c3:b8:f9, IRQ 21 [ 18.036000] parport: PnPBIOS parport detected. [ 18.036000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 18.112000] r8169: eth0: link down [ 18.236000] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 17 [ 18.436000] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 18.656000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2 [ 18.728000] lp0: using parport0 (interrupt-driven). [ 18.856000] Adding 1052216k swap on /dev/disk/by-uuid/ba363ce4-0f51-4ff4-abdb-c02e7467cc43. Priority:-1 extents:1 across:1052216k [ 18.980000] EXT3 FS on hda5, internal journal [ 19.200000] NET: Registered protocol family 17 [ 19.380000] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 19.576000] r8169: eth0: link up [ 19.728000] NTFS volume version 3.1. [ 22.372000] input: Power Button (FF) as /class/input/input3 [ 22.372000] ACPI: Power Button (FF) [PWRF] [ 22.376000] input: Power Button (CM) as /class/input/input4 [ 22.376000] ACPI: Power Button (CM) [PWRB] [ 22.404000] Using specific hotkey driver [ 22.468000] No dock devices found. [ 22.508000] ibm_acpi: ec object not found [ 22.576000] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 22.888000] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ processors (version 2.00.00) [ 22.888000] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xe [ 22.888000] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x10 [ 22.888000] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 26.448000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 26.448000] apm: disabled - APM is not SMP safe. [ 27.332000] NET: Registered protocol family 10 [ 27.332000] lo: Disabled Privacy Extensions [ 32.412000] hda-intel: Invalid position buffer, using LPIB read method instead. [ 32.872000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 33.008000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 33.012000] NFSD: starting 90-second grace period [ 37.488000] eth0: no IPv6 routers present --------------000408040105040707030000 Content-Type: text/plain; name="dmesg.2.6.21-rc5.irqpoll" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.2.6.21-rc5.irqpoll" [ 0.000000] Linux version 2.6.21-rc5 (root@matias) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #1 SMP Sun Mar 25 23:25:22 ART 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] sanitize start [ 0.000000] sanitize end [ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 [ 0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2 [ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fec0000 end: 000000003ffc0000 type: 1 [ 0.000000] copy_e820_map() type is E820_RAM [ 0.000000] copy_e820_map() start: 000000003ffc0000 size: 000000000000e000 end: 000000003ffce000 type: 3 [ 0.000000] copy_e820_map() start: 000000003ffce000 size: 0000000000032000 end: 0000000040000000 type: 4 [ 0.000000] copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end: 0000000100000000 type: 2 [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable) [ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffce000 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 262080) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262080 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262080 [ 0.000000] On node 0 totalpages: 262080 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32449 pages, LIFO batch:7 [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F84E0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 3FFC0000, 0040 (r1 A M I OEMRSDT 7000604 MSFT 97) [ 0.000000] ACPI: FACP 3FFC0200, 0084 (r2 A M I OEMFACP 7000604 MSFT 97) [ 0.000000] ACPI: DSDT 3FFC0480, 3DC9 (r1 AMMR_ AMMR_B36 B36 INTL 20051117) [ 0.000000] ACPI: FACS 3FFCE000, 0040 [ 0.000000] ACPI: APIC 3FFC0390, 005C (r1 A M I OEMAPIC 7000604 MSFT 97) [ 0.000000] ACPI: MCFG 3FFC03F0, 003C (r1 A M I OEMMCFG 7000604 MSFT 97) [ 0.000000] ACPI: WDRT 3FFC0430, 0047 (r1 A M I OEMWDRT 7000604 MSFT 97) [ 0.000000] ACPI: OEMB 3FFCE040, 0060 (r1 A M I AMI_OEM 7000604 MSFT 97) [ 0.000000] ACPI: HPET 3FFC4250, 0038 (r1 A M I OEMHPET 7000604 MSFT 97) [ 0.000000] ACPI: SSDT 3FFC4290, 01C4 (r1 A M I ACPI2PPC 1 AMI 1) [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:11 APIC version 16 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:11 APIC version 16 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8000 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000) [ 0.000000] Built 1 zonelists. Total pages: 260033 [ 0.000000] Kernel command line: root=/dev/hda5 ro irqpoll [ 0.000000] Misrouted IRQ fixup and polling support enabled [ 0.000000] This may significantly impact system performance [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2000.238 MHz processor. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1029748k/1048320k available (2099k kernel code, 17928k reserved, 970k data, 332k init, 130816k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.000000] .init : 0xc0406000 - 0xc0459000 ( 332 kB) [ 0.000000] .data : 0xc030cc9c - 0xc03ff754 ( 970 kB) [ 0.000000] .text : 0xc0100000 - 0xc030cc9c (2099 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 0.000000] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.000000] hpet0: 4 32-bit timers, 14318180 Hz [ 0.084000] Calibrating delay using timer specific routine.. 4009.58 BogoMIPS (lpj=8019165) [ 0.084000] Security Framework v1.0.0 initialized [ 0.084000] SELinux: Disabled at boot. [ 0.084000] Mount-cache hash table entries: 512 [ 0.084000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f [ 0.084000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.084000] CPU: L2 Cache: 256K (64 bytes/line) [ 0.084000] CPU 0(2) -> Core 0 [ 0.084000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f [ 0.084000] Compat vDSO mapped to ffffe000. [ 0.084000] Checking 'hlt' instruction... OK. [ 0.100000] SMP alternatives: switching to UP code [ 0.100000] ACPI: Core revision 20070126 [ 0.100000] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02 [ 0.100000] SMP alternatives: switching to SMP code [ 0.100000] Booting processor 1/1 eip 3000 [ 0.112000] Initializing CPU#1 [ 0.192000] Calibrating delay using timer specific routine.. 4000.15 BogoMIPS (lpj=8000314) [ 0.192000] CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f [ 0.192000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.192000] CPU: L2 Cache: 256K (64 bytes/line) [ 0.192000] CPU 1(2) -> Core 1 [ 0.192000] CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f [ 0.192000] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ stepping 02 [ 0.192000] Total of 2 processors activated (8009.73 BogoMIPS). [ 0.192000] ENABLING IO-APIC IRQs [ 0.192000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.232000] Brought up 2 CPUs [ 0.272000] migration_cost=4000 [ 0.272000] NET: Registered protocol family 16 [ 0.272000] EISA bus registered [ 0.272000] ACPI: bus type pci registered [ 0.272000] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved [ 0.272000] PCI: Not using MMCONFIG. [ 0.272000] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2 [ 0.272000] PCI: Using configuration type 1 [ 0.272000] Setting up standard PCI resources [ 0.316000] ACPI: Interpreter enabled [ 0.316000] ACPI: (supports S0 S1 S3 S4 S5) [ 0.316000] ACPI: Using IOAPIC for interrupt routing [ 0.316000] Error attaching device data [ 0.316000] Error attaching device data [ 0.324000] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.324000] PCI: Probing PCI hardware (bus 00) [ 0.324000] 0000:00:14.1: trying to change BAR0 from 0000 to 01F0 [ 0.324000] 0000:00:14.1: trying to change BAR1 from 0000 to 03F4 [ 0.324000] 0000:00:14.1: trying to change BAR2 from 0000 to 0170 [ 0.324000] 0000:00:14.1: trying to change BAR3 from 0000 to 0374 [ 0.324000] Boot video device is 0000:01:00.0 [ 0.324000] PCI: Transparent bridge - 0000:00:14.4 [ 0.324000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.324000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.324000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.340000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.340000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.340000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.340000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.340000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.340000] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled. [ 0.344000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.344000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. [ 0.344000] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.344000] pnp: PnP ACPI init [ 0.348000] pnp: PnP ACPI: found 17 devices [ 0.348000] PnPBIOS: Disabled by ACPI PNP [ 0.348000] SCSI subsystem initialized [ 0.348000] libata version 2.20 loaded. [ 0.348000] PCI: Using ACPI for IRQ routing [ 0.348000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 0.356000] NET: Registered protocol family 8 [ 0.356000] NET: Registered protocol family 20 [ 0.356000] pnp: 00:01: iomem range 0x0-0x0 could not be reserved [ 0.356000] pnp: 00:09: iomem range 0xffb80000-0xffbfffff could not be reserved [ 0.356000] pnp: 00:09: iomem range 0xfed00000-0xfed003ff could not be reserved [ 0.356000] pnp: 00:09: iomem range 0xff6ff000-0xff6ff7ff has been reserved [ 0.356000] pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved [ 0.356000] pnp: 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.356000] pnp: 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.356000] pnp: 00:0e: ioport range 0xa00-0xa0f has been reserved [ 0.356000] pnp: 00:0e: ioport range 0x600-0x60f has been reserved [ 0.356000] pnp: 00:0f: iomem range 0xe0000000-0xefffffff has been reserved [ 0.356000] pnp: 00:10: iomem range 0x0-0x9ffff could not be reserved [ 0.356000] pnp: 00:10: iomem range 0xc0000-0xcffff could not be reserved [ 0.356000] pnp: 00:10: iomem range 0xe0000-0xfffff could not be reserved [ 0.356000] pnp: 00:10: iomem range 0x100000-0x3fffffff could not be reserved [ 0.360000] Time: hpet clocksource has been installed. [ 0.388000] PCI: Bridge: 0000:00:02.0 [ 0.388000] IO window: disabled. [ 0.388000] MEM window: fa900000-fe9fffff [ 0.388000] PREFETCH window: bff00000-dfefffff [ 0.388000] PCI: Bridge: 0000:00:14.4 [ 0.388000] IO window: b000-bfff [ 0.388000] MEM window: fea00000-feafffff [ 0.388000] PREFETCH window: 50000000-500fffff [ 0.388000] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 0.388000] NET: Registered protocol family 2 [ 0.428000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.428000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 0.428000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.428000] TCP: Hash tables configured (established 131072 bind 65536) [ 0.432000] TCP reno registered [ 0.444000] checking if image is initramfs... it is [ 0.852000] Freeing initrd memory: 5020k freed [ 0.852000] audit: initializing netlink socket (disabled) [ 0.852000] audit(1174956492.848:1): initialized [ 0.852000] highmem bounce pool size: 64 pages [ 0.852000] VFS: Disk quotas dquot_6.5.1 [ 0.852000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.856000] io scheduler noop registered [ 0.856000] io scheduler anticipatory registered [ 0.856000] io scheduler deadline registered [ 0.856000] io scheduler cfq registered (default) [ 0.956000] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 0.956000] assign_interrupt_mode Found MSI capability [ 0.956000] Allocate Port Service[0000:00:02.0:pcie00] [ 0.956000] isapnp: Scanning for PnP cards... [ 1.308000] isapnp: No Plug & Play device found [ 1.336000] Real Time Clock Driver v1.12ac [ 1.336000] hpet_resources: 0xfed00000 is busy [ 1.336000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.336000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.336000] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.336000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 1.336000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 1.336000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 1.340000] ahci 0000:00:12.0: version 2.1 [ 1.340000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 16 [ 2.344000] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 2.344000] ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part [ 2.344000] ata1: SATA max UDMA/133 cmd 0xf8824d00 ctl 0x00000000 bmdma 0x00000000 irq 222 [ 2.344000] ata2: SATA max UDMA/133 cmd 0xf8824d80 ctl 0x00000000 bmdma 0x00000000 irq 222 [ 2.344000] ata3: SATA max UDMA/133 cmd 0xf8824e00 ctl 0x00000000 bmdma 0x00000000 irq 222 [ 2.344000] ata4: SATA max UDMA/133 cmd 0xf8824e80 ctl 0x00000000 bmdma 0x00000000 irq 222 [ 2.344000] scsi0 : ahci [ 2.656000] ata1: SATA link down (SStatus 0 SControl 300) [ 2.656000] scsi1 : ahci [ 3.140000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 33.140000] ata2.00: qc timeout (cmd 0xec) [ 33.140000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104) [ 34.120000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 64.120000] ata2.00: qc timeout (cmd 0xec) [ 64.120000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104) [ 64.120000] ata2.00: limiting speed to UDMA7:PIO5 [ 65.100000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 95.100000] ata2.00: qc timeout (cmd 0xec) [ 95.100000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104) [ 96.080000] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 96.080000] scsi2 : ahci [ 96.392000] ata3: SATA link down (SStatus 0 SControl 300) [ 96.392000] scsi3 : ahci [ 96.704000] ata4: SATA link down (SStatus 0 SControl 300) [ 96.704000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 96.704000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 96.704000] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 96.704000] mice: PS/2 mouse device common for all mice [ 96.704000] EISA: Probing bus 0 at eisa.0 [ 96.704000] EISA: Detected 0 cards. [ 96.704000] TCP cubic registered [ 96.704000] NET: Registered protocol family 1 [ 96.704000] Starting balanced_irq [ 96.704000] Using IPI No-Shortcut mode [ 96.708000] Freeing unused kernel memory: 332k freed [ 96.724000] input: AT Translated Set 2 keyboard as /class/input/input0 [ 96.780000] ACPI: duty_cycle spans bit 4 [ 97.236000] SB600_PATA: IDE controller at PCI slot 0000:00:14.1 [ 97.240000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17 [ 97.240000] SB600_PATA: chipset revision 0 [ 97.240000] SB600_PATA: not 100% native mode: will probe irqs later [ 97.240000] ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA [ 97.240000] Probing IDE interface ide0... [ 97.528000] hda: HDS728080PLAT20, ATA DISK drive [ 97.976000] hdb: ASUS DRW-1608P3S, ATAPI CD/DVD-ROM drive [ 98.032000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 98.052000] hda: max request size: 512KiB [ 98.056000] hda: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(100) [ 98.056000] hda: cache flushes supported [ 98.056000] hda: hda1 hda2 < hda5 hda6 > [ 98.108000] hdb: ATAPI 63X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache, UDMA(66) [ 98.108000] Uniform CD-ROM driver Revision: 3.20 [ 98.356000] Probing IDE interface ide1... [ 98.368000] usbcore: registered new interface driver usbfs [ 98.368000] usbcore: registered new interface driver hub [ 98.368000] usbcore: registered new device driver usb [ 98.368000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 98.368000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 98.372000] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 98.372000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [ 98.372000] ohci_hcd 0000:00:13.0: irq 17, io mem 0xfebfe000 [ 98.432000] usb usb1: configuration #1 chosen from 1 choice [ 98.432000] hub 1-0:1.0: USB hub found [ 98.432000] hub 1-0:1.0: 2 ports detected [ 98.536000] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 18 [ 98.536000] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 98.536000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [ 98.536000] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfebfd000 [ 98.596000] usb usb2: configuration #1 chosen from 1 choice [ 98.596000] hub 2-0:1.0: USB hub found [ 98.596000] hub 2-0:1.0: 2 ports detected [ 98.700000] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 98.700000] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 98.700000] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 98.700000] ohci_hcd 0000:00:13.2: irq 19, io mem 0xfebfc000 [ 98.760000] usb usb3: configuration #1 chosen from 1 choice [ 98.760000] hub 3-0:1.0: USB hub found [ 98.760000] hub 3-0:1.0: 2 ports detected [ 98.864000] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 18 [ 98.864000] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 98.864000] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 [ 98.864000] ohci_hcd 0000:00:13.3: irq 18, io mem 0xfebfb000 [ 98.924000] usb usb4: configuration #1 chosen from 1 choice [ 98.924000] hub 4-0:1.0: USB hub found [ 98.924000] hub 4-0:1.0: 2 ports detected [ 99.028000] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 19 [ 99.028000] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 99.028000] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 [ 99.028000] ohci_hcd 0000:00:13.4: irq 19, io mem 0xfebfa000 [ 99.088000] usb usb5: configuration #1 chosen from 1 choice [ 99.088000] hub 5-0:1.0: USB hub found [ 99.088000] hub 5-0:1.0: 2 ports detected [ 99.192000] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 20 [ 99.192000] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 99.192000] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 [ 99.192000] ehci_hcd 0000:00:13.5: debug port 1 [ 99.192000] ehci_hcd 0000:00:13.5: irq 20, io mem 0xfebff800 [ 99.192000] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 99.192000] usb usb6: configuration #1 chosen from 1 choice [ 99.192000] hub 6-0:1.0: USB hub found [ 99.192000] hub 6-0:1.0: 10 ports detected [ 99.328000] Attempting manual resume [ 99.368000] kjournald starting. Commit interval 5 seconds [ 99.368000] EXT3-fs: mounted filesystem with ordered data mode. [ 107.608000] input: PC Speaker as /class/input/input1 [ 107.716000] Floppy drive(s): fd0 is 1.44M [ 107.772000] FDC 0 is a post-1991 82077 [ 107.776000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 107.796000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 107.856000] Linux agpgart interface v0.102 (c) Dave Jones [ 107.940000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [ 108.180000] parport: PnPBIOS parport detected. [ 108.180000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 108.272000] r8169 Gigabit Ethernet driver 2.2LK loaded [ 108.272000] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 108.272000] eth0: RTL8169sc/8110sc at 0xf891e800, 00:16:17:c3:b8:f9, IRQ 21 [ 108.344000] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 17 [ 108.404000] r8169: eth0: link down [ 108.544000] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 108.828000] lp0: using parport0 (interrupt-driven). [ 108.888000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2 [ 108.960000] w83627ehf: unsupported chip ID: 0xffff [ 109.020000] Adding 1052216k swap on /dev/disk/by-uuid/ba363ce4-0f51-4ff4-abdb-c02e7467cc43. Priority:-1 extents:1 across:1052216k [ 109.108000] EXT3 FS on hda5, internal journal [ 109.428000] NTFS driver 2.1.28 [Flags: R/O MODULE]. [ 109.492000] NTFS volume version 3.1. [ 109.532000] NET: Registered protocol family 17 [ 109.840000] r8169: eth0: link up [ 111.800000] input: Power Button (FF) as /class/input/input3 [ 111.800000] ACPI: Power Button (FF) [PWRF] [ 111.800000] input: Power Button (CM) as /class/input/input4 [ 111.800000] ACPI: Power Button (CM) [PWRB] [ 111.864000] No dock devices found. [ 111.892000] ibm_acpi: ec object not found [ 111.948000] toshiba_acpi: Unknown parameter `hotkeys_over_acpi' [ 112.192000] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ processors (version 2.00.00) [ 112.192000] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xe [ 112.192000] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x10 [ 112.192000] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 113.036000] NET: Registered protocol family 10 [ 113.036000] lo: Disabled Privacy Extensions [ 114.868000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 114.868000] apm: disabled - APM is not SMP safe. [ 116.824000] tsdev (compaq touchscreen emulation) is scheduled for removal. [ 116.824000] See Documentation/feature-removal-schedule.txt for details. [ 117.616000] hda-intel: Invalid position buffer, using LPIB read method instead. [ 120.228000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 120.344000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 120.344000] NFSD: starting 90-second grace period [ 123.444000] eth0: no IPv6 routers present [ 124.000000] Clocksource tsc unstable (delta = -249947179 ns) [ 134.036000] ISO 9660 Extensions: RRIP_1991A --------------000408040105040707030000 Content-Type: text/plain; name="lshw.2.6.20.4.irqpoll" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="lshw.2.6.20.4.irqpoll" matias description: Desktop Computer product: MS-7242 vendor: MSI version: 0A serial: To Be Filled By O.E.M. width: 32 bits capabilities: smbios-2.4 dmi-2.4 configuration: chassis=desktop uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: MS-7242 vendor: MSI physical id: 0 version: 0A serial: To be filled by O.E.M. slot: To Be Filled By O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 080013 (07/04/2006) size: 64KB capacity: 448KB capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification *-cpu description: CPU product: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ vendor: Advanced Micro Devices [AMD] physical id: 4 bus info: cpu@0 version: 15.11.2 serial: To Be Filled By O.E.M. slot: CPU 1 size: 1GHz capacity: 2GHz width: 64 bits clock: 200MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt x86-64 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm cr8legacy ts fid vid ttp tm stc cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 128KB capacity: 128KB capabilities: pipeline-burst internal varies data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 256KB capacity: 512KB capabilities: pipeline-burst internal varies unified *-cache:2 DISABLED description: L3 cache physical id: 7 slot: L3-Cache capabilities: internal *-memory description: System Memory physical id: 28 slot: System board or motherboard size: 1GB *-bank:0 description: DIMM Synchronous 266 MHz (3.8 ns) product: PartNum0 vendor: Manufacturer0 physical id: 0 serial: SerNum0 slot: DIMM0 size: 512MB width: 64 bits clock: 266MHz (3.7594ns) *-bank:1 description: DIMM SDRAM [empty] product: PartNum1 vendor: Manufacturer1 physical id: 1 serial: SerNum1 slot: DIMM1 *-bank:2 description: DIMM Synchronous 266 MHz (3.8 ns) product: PartNum2 vendor: Manufacturer2 physical id: 2 serial: SerNum2 slot: DIMM2 size: 512MB width: 64 bits clock: 266MHz (3.7594ns) *-bank:3 description: DIMM SDRAM [empty] product: PartNum3 vendor: Manufacturer3 physical id: 3 serial: SerNum3 slot: DIMM3 *-pci:0 description: Host bridge product: RS480 Host Bridge vendor: ATI Technologies Inc physical id: 100 bus info: pci@00:00.0 version: 10 width: 32 bits clock: 66MHz *-pci:0 description: PCI bridge product: RS480 PCI-X Root Port vendor: ATI Technologies Inc physical id: 2 bus info: pci@00:02.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci normal_decode bus_master cap_list configuration: driver=pcieport-driver *-display description: VGA compatible controller product: G71 [GeForce 7300 GS] vendor: nVidia Corporation physical id: 0 bus info: pci@01:00.0 version: a1 size: 256MB width: 64 bits clock: 33MHz capabilities: vga bus_master cap_list resources: iomemory:fd000000-fdffffff iomemory:c0000000-cfffffff iomemory:fc000000-fcffffff irq:10 *-storage description: SATA controller product: SB600 Non-Raid-5 SATA vendor: ATI Technologies Inc physical id: 12 bus info: pci@00:12.0 logical name: scsi1 version: 00 width: 32 bits clock: 66MHz capabilities: storage ahci_1.0 bus_master cap_list emulated configuration: driver=ahci resources: ioport:e800-e807 ioport:e400-e403 ioport:e000-e007 ioport:dc00-dc03 ioport:d800-d80f iomemory:febffc00-febfffff irq:222 *-disk description: SCSI Disk product: HDS728080PLA380 vendor: ATA physical id: 0.0.0 bus info: scsi@1:0.0.0 logical name: /dev/sda version: PF2O serial: PFDH37SYTWKR9E size: 76GB capabilities: partitioned partitioned:dos configuration: ansiversion=5 *-volume description: HPFS/NTFS partition physical id: 1 bus info: scsi@1:0.0.0,1 logical name: /dev/sda1 capacity: 19GB capabilities: primary bootable *-usb:0 description: USB Controller product: SB600 USB (OHCI0) vendor: ATI Technologies Inc physical id: 13 bus info: pci@00:13.0 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master cap_list configuration: driver=ohci_hcd resources: iomemory:febfe000-febfefff irq:17 *-usbhost product: OHCI Host Controller vendor: Linux 2.6.20.4 ohci_hcd physical id: 1 bus info: usb@1 logical name: usb1 version: 2.06 capabilities: usb-1.10 configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s *-usb:1 description: USB Controller product: SB600 USB (OHCI1) vendor: ATI Technologies Inc physical id: 13.1 bus info: pci@00:13.1 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master cap_list configuration: driver=ohci_hcd resources: iomemory:febfd000-febfdfff irq:19 *-usbhost product: OHCI Host Controller vendor: Linux 2.6.20.4 ohci_hcd physical id: 1 bus info: usb@3 logical name: usb3 version: 2.06 capabilities: usb-1.10 configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s *-usb:2 description: USB Controller product: SB600 USB (OHCI2) vendor: ATI Technologies Inc physical id: 13.2 bus info: pci@00:13.2 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master cap_list configuration: driver=ohci_hcd resources: iomemory:febfc000-febfcfff irq:20 *-usbhost product: OHCI Host Controller vendor: Linux 2.6.20.4 ohci_hcd physical id: 1 bus info: usb@4 logical name: usb4 version: 2.06 capabilities: usb-1.10 configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s *-usb:3 description: USB Controller product: SB600 USB (OHCI3) vendor: ATI Technologies Inc physical id: 13.3 bus info: pci@00:13.3 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master cap_list configuration: driver=ohci_hcd resources: iomemory:febfb000-febfbfff irq:19 *-usbhost product: OHCI Host Controller vendor: Linux 2.6.20.4 ohci_hcd physical id: 1 bus info: usb@5 logical name: usb5 version: 2.06 capabilities: usb-1.10 configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s *-usb:4 description: USB Controller product: SB600 USB (OHCI4) vendor: ATI Technologies Inc physical id: 13.4 bus info: pci@00:13.4 version: 00 width: 32 bits clock: 66MHz capabilities: ohci bus_master cap_list configuration: driver=ohci_hcd resources: iomemory:febfa000-febfafff irq:20 *-usbhost product: OHCI Host Controller vendor: Linux 2.6.20.4 ohci_hcd physical id: 1 bus info: usb@6 logical name: usb6 version: 2.06 capabilities: usb-1.10 configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s *-usb:5 description: USB Controller product: SB600 USB Controller (EHCI) vendor: ATI Technologies Inc physical id: 13.5 bus info: pci@00:13.5 version: 00 width: 32 bits clock: 66MHz capabilities: ehci bus_master cap_list configuration: driver=ehci_hcd resources: iomemory:febff800-febff8ff irq:18 *-usbhost product: EHCI Host Controller vendor: Linux 2.6.20.4 ehci_hcd physical id: 1 bus info: usb@2 logical name: usb2 version: 2.06 capabilities: usb-2.00 configuration: driver=hub maxpower=0mA slots=10 speed=480.0MB/s *-serial UNCLAIMED description: SMBus product: SB600 SMBus vendor: ATI Technologies Inc physical id: 14 bus info: pci@00:14.0 version: 13 width: 32 bits clock: 66MHz capabilities: cap_list resources: ioport:b00-b0f *-ide description: IDE interface product: SB600 IDE vendor: ATI Technologies Inc physical id: 14.1 bus info: pci@00:14.1 version: 00 width: 32 bits clock: 66MHz capabilities: ide bus_master cap_list configuration: driver=ATIIXP_IDE resources: ioport:1f0-1f7 ioport:3f4-3f3 ioport:170-177 ioport:374-373 ioport:ff00-ff0f irq:17 *-ide description: IDE Channel 0 physical id: 0 bus info: ide@0 logical name: ide0 clock: 66MHz *-disk description: ATA Disk product: HDS728080PLAT20 physical id: 0 bus info: ide@0.0 logical name: /dev/hda version: PF2OA21B serial: PFD200E1DN2E7B size: 76GB capacity: 76GB capabilities: ata dma lba iordy smart security pm apm partitioned partitioned:dos configuration: apm=off mode=udma2 smart=on *-volume:0 description: HPFS/NTFS partition physical id: 1 bus info: ide@0.0,1 logical name: /dev/hda1 capacity: 18GB capabilities: primary bootable *-volume:1 description: W95 Ext'd (LBA) partition physical id: 2 bus info: ide@0.0,2 logical name: /dev/hda2 capacity: 58GB capabilities: primary *-cdrom description: DVD-RAM writer product: ASUS DRW-1608P3S physical id: 1 bus info: ide@0.1 logical name: /dev/hdb version: 1.24 capabilities: packet atapi cdrom removable nonmagnetic dma lba iordy pm audio cd-r cd-rw dvd dvd-r dvd-ram configuration: mode=udma4 *-disc physical id: 0 logical name: /dev/hdb *-multimedia description: Audio device product: SB600 Azalia vendor: ATI Technologies Inc physical id: 14.2 bus info: pci@00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=HDA Intel resources: iomemory:febf4000-febf7fff irq:17 *-isa UNCLAIMED description: ISA bridge product: SB600 PCI to LPC Bridge vendor: ATI Technologies Inc physical id: 14.3 bus info: pci@00:14.3 version: 00 width: 32 bits clock: 66MHz capabilities: isa bus_master *-pci:1 description: PCI bridge product: SB600 PCI to PCI Bridge vendor: ATI Technologies Inc physical id: 14.4 bus info: pci@00:14.4 version: 00 width: 32 bits clock: 66MHz capabilities: pci subtractive_decode bus_master *-network description: Ethernet interface product: RTL-8110SC/8169SC Gigabit Ethernet vendor: Realtek Semiconductor Co., Ltd. physical id: 6 bus info: pci@02:06.0 logical name: eth0 version: 10 serial: 00:16:17:c3:b8:f9 size: 100MB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegociation configuration: autonegociation=on broadcast=yes driver=r8169 driverversion=2.2LK duplex=full ip=192.168.0.2 link=yes multicast=yes port=twisted pair speed=100MB/s resources: ioport:b800-b8ff iomemory:feaff800-feaff8ff irq:21 *-pci:1 description: Host bridge product: K8 [Athlon64/Opteron] HyperTransport Technology Configuration vendor: Advanced Micro Devices [AMD] physical id: 101 bus info: pci@00:18.0 version: 00 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: K8 [Athlon64/Opteron] Address Map vendor: Advanced Micro Devices [AMD] physical id: 102 bus info: pci@00:18.1 version: 00 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: K8 [Athlon64/Opteron] DRAM Controller vendor: Advanced Micro Devices [AMD] physical id: 103 bus info: pci@00:18.2 version: 00 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: K8 [Athlon64/Opteron] Miscellaneous Control vendor: Advanced Micro Devices [AMD] physical id: 104 bus info: pci@00:18.3 version: 00 width: 32 bits clock: 33MHz --------------000408040105040707030000--