[PATCH 0/4] libata: Workaround/fixes for ATAPI devices (take 3)

[PATCH 0/4] libata: Workaround/fixes for ATAPI devices (take 3)

[Albert Lee]

patch 1/4: Reorder HSM_ST_FIRST
patch 2/4: Clear tf before doing request sense
patch 3/4: Limit max sector to 128 for TORiSAN DVD drives
patch 4/4: Limit ATAPI DMA to R/W commands only for TORiSAN DVD drives

(patch 2/4 revised per Tejun's advice.)
(patch 3/4 revised per Vlad's new test result.)

[PATCH 1/4] libata: reorder HSM_ST_FIRST for easier decoding (take 3)

[Albert Lee]

patch 1/4:
  Reorder HSM_ST_FIRST, such that the task state transition is easier decoded with human eyes.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
---
Patch against libata-dev tree, for your review, thanks.

diff -Nrup 00_libata-dev.ori/include/linux/libata.h 01_hsm_st/include/linux/libata.h
--- 00_libata-dev.ori/include/linux/libata.h	2007-03-23 16:56:24.000000000 +0800
+++ 01_hsm_st/include/linux/libata.h	2007-04-02 10:50:50.000000000 +0800
@@ -315,11 +315,11 @@ enum {
 
 enum hsm_task_states {
 	HSM_ST_IDLE,		/* no command on going */
+	HSM_ST_FIRST,		/* (waiting the device to)
+				   write CDB or first data block */
 	HSM_ST,			/* (waiting the device to) transfer data */
 	HSM_ST_LAST,		/* (waiting the device to) complete command */
 	HSM_ST_ERR,		/* error */
-	HSM_ST_FIRST,		/* (waiting the device to)
-				   write CDB or first data block */
 };
 
 enum ata_completion_errors {

Re: [PATCH 1/4] libata: reorder HSM_ST_FIRST for easier decoding (take 3)

[Jeff Garzik]

Albert Lee wrote:
> patch 1/4:
>   Reorder HSM_ST_FIRST, such that the task state transition is easier decoded with human eyes.
> 
> Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
> ---
> Patch against libata-dev tree, for your review, thanks.
> 
> diff -Nrup 00_libata-dev.ori/include/linux/libata.h 01_hsm_st/include/linux/libata.h
> --- 00_libata-dev.ori/include/linux/libata.h	2007-03-23 16:56:24.000000000 +0800
> +++ 01_hsm_st/include/linux/libata.h	2007-04-02 10:50:50.000000000 +0800
> @@ -315,11 +315,11 @@ enum {
>  
>  enum hsm_task_states {
>  	HSM_ST_IDLE,		/* no command on going */
> +	HSM_ST_FIRST,		/* (waiting the device to)
> +				   write CDB or first data block */
>  	HSM_ST,			/* (waiting the device to) transfer data */
>  	HSM_ST_LAST,		/* (waiting the device to) complete command */
>  	HSM_ST_ERR,		/* error */
> -	HSM_ST_FIRST,		/* (waiting the device to)
> -				   write CDB or first data block */
>  };

applied 1-4

[PATCH 2/4] libata: Clear tf before doing request sense (take 3)

[Albert Lee]

patch 2/4:
  Clear tf before doing request sense.

This fixes the AOpen 56X/AKH timeout problem.
(http://bugzilla.kernel.org/show_bug.cgi?id=8244)

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
---
Per Tejun's advice to use result_tf instead.
Patch against libata-dev tree, for your review, thanks.

diff -Nrup 01_hsm_st/drivers/ata/libata-eh.c 02_aopen_rs/drivers/ata/libata-eh.c
--- 01_hsm_st/drivers/ata/libata-eh.c	2007-03-23 16:56:13.000000000 +0800
+++ 02_aopen_rs/drivers/ata/libata-eh.c	2007-04-02 11:04:11.000000000 +0800
@@ -982,26 +982,27 @@ static int ata_eh_read_log_10h(struct at
  *	RETURNS:
  *	0 on success, AC_ERR_* mask on failure
  */
-static unsigned int atapi_eh_request_sense(struct ata_device *dev,
-					   unsigned char *sense_buf)
+static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc)
 {
+	struct ata_device *dev = qc->dev;
+	unsigned char *sense_buf = qc->scsicmd->sense_buffer;
 	struct ata_port *ap = dev->ap;
 	struct ata_taskfile tf;
 	u8 cdb[ATAPI_CDB_LEN];
 
 	DPRINTK("ATAPI request sense\n");
 
-	ata_tf_init(dev, &tf);
-
 	/* FIXME: is this needed? */
 	memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE);
 
-	/* XXX: why tf_read here? */
-	ap->ops->tf_read(ap, &tf);
-
-	/* fill these in, for the case where they are -not- overwritten */
+	/* initialize sense_buf with the error register,
+	 * for the case where they are -not- overwritten
+	 */
 	sense_buf[0] = 0x70;
-	sense_buf[2] = tf.feature >> 4;
+	sense_buf[2] = qc->result_tf.feature >> 4;
+
+	/* some devices time out if garbage left in tf */ 
+	ata_tf_init(dev, &tf);
 
 	memset(cdb, 0, ATAPI_CDB_LEN);
 	cdb[0] = REQUEST_SENSE;
@@ -1165,8 +1166,7 @@ static unsigned int ata_eh_analyze_tf(st
 
 	case ATA_DEV_ATAPI:
 		if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) {
-			tmp = atapi_eh_request_sense(qc->dev,
-						     qc->scsicmd->sense_buffer);
+			tmp = atapi_eh_request_sense(qc);
 			if (!tmp) {
 				/* ATA_QCFLAG_SENSE_VALID is used to
 				 * tell atapi_qc_complete() that sense

[PATCH 3/4] libata: Limit max sector to 128 for TORiSAN DVD drives (take 3)

[Albert Lee]

patch 3/4:
  The TORiSAN drive locks up when max sector == 256.
  Limit max sector to 128 for the TORiSAN DRD-N216 drives.
  (http://bugzilla.kernel.org/show_bug.cgi?id=6710)

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
---
Revised to use max sector = 128 per Vlad's new test result.
Patch against libata-dev tree, for your review, thanks.

diff -Nrup 02_aopen_rs/drivers/ata/libata-core.c 03_max_sect/drivers/ata/libata-core.c
--- 02_aopen_rs/drivers/ata/libata-core.c	2007-03-23 16:56:13.000000000 +0800
+++ 03_max_sect/drivers/ata/libata-core.c	2007-04-02 10:56:59.000000000 +0800
@@ -1784,6 +1784,9 @@ int ata_dev_configure(struct ata_device 
 		dev->max_sectors = ATA_MAX_SECTORS;
 	}
 
+	if (ata_device_blacklisted(dev) & ATA_HORKAGE_MAX_SEC_128)
+		dev->max_sectors = min(ATA_MAX_SECTORS_128, dev->max_sectors);
+
 	if (ap->ops->dev_config)
 		ap->ops->dev_config(ap, dev);
 
@@ -3352,6 +3355,9 @@ static const struct ata_blacklist_entry 
 	{ "_NEC DV5800A", 	NULL,		ATA_HORKAGE_NODMA },
 	{ "SAMSUNG CD-ROM SN-124","N001",	ATA_HORKAGE_NODMA },
 
+	/* Weird ATAPI devices */
+	{ "TORiSAN DVD-ROM DRD-N216", NULL,	ATA_HORKAGE_MAX_SEC_128 },
+
 	/* Devices we expect to fail diagnostics */
 
 	/* Devices where NCQ should be avoided */
diff -Nrup 02_aopen_rs/include/linux/ata.h 03_max_sect/include/linux/ata.h
--- 02_aopen_rs/include/linux/ata.h	2007-03-23 16:56:24.000000000 +0800
+++ 03_max_sect/include/linux/ata.h	2007-04-02 10:56:59.000000000 +0800
@@ -40,6 +40,7 @@ enum {
 	ATA_MAX_DEVICES		= 2,	/* per bus/port */
 	ATA_MAX_PRD		= 256,	/* we could make these 256/256 */
 	ATA_SECT_SIZE		= 512,
+	ATA_MAX_SECTORS_128	= 128,
 	ATA_MAX_SECTORS		= 256,
 	ATA_MAX_SECTORS_LBA48	= 65535,/* TODO: 65536? */
 
diff -Nrup 02_aopen_rs/include/linux/libata.h 03_max_sect/include/linux/libata.h
--- 02_aopen_rs/include/linux/libata.h	2007-04-02 10:50:50.000000000 +0800
+++ 03_max_sect/include/linux/libata.h	2007-04-02 10:56:59.000000000 +0800
@@ -311,6 +311,7 @@ enum {
 	ATA_HORKAGE_DIAGNOSTIC	= (1 << 0),	/* Failed boot diag */
 	ATA_HORKAGE_NODMA	= (1 << 1),	/* DMA problems */
 	ATA_HORKAGE_NONCQ	= (1 << 2),	/* Don't use NCQ */
+	ATA_HORKAGE_MAX_SEC_128	= (1 << 3),	/* Limit max sects to 128 */
 };
 
 enum hsm_task_states {

[PATCH 4/4] libata: Limit ATAPI DMA to R/W commands only for TORiSAN DVD drives (take 3)

[Albert Lee]

patch 4/4:

  Limit ATAPI DMA to R/W commands only for TORiSAN DRD-N216 DVD-ROM drives
  (http://bugzilla.kernel.org/show_bug.cgi?id=6710)

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
---
Other command like READ_DVD_STRUCTURE seems to work under ATAPI DMA, but
I am convervative about it. So, only allow ATAPI DMA for Read/Write for safty.

Patch against libata-dev tree, for your review, thanks.

diff -Nrup 03_max_sect/drivers/ata/libata-core.c 04_dma_rw_only/drivers/ata/libata-core.c
--- 03_max_sect/drivers/ata/libata-core.c	2007-04-02 10:56:59.000000000 +0800
+++ 04_dma_rw_only/drivers/ata/libata-core.c	2007-04-02 11:01:18.000000000 +0800
@@ -1787,6 +1787,10 @@ int ata_dev_configure(struct ata_device 
 	if (ata_device_blacklisted(dev) & ATA_HORKAGE_MAX_SEC_128)
 		dev->max_sectors = min(ATA_MAX_SECTORS_128, dev->max_sectors);
 
+	/* limit ATAPI DMA to R/W commands only */
+	if (ata_device_blacklisted(dev) & ATA_HORKAGE_DMA_RW_ONLY)
+		dev->horkage |= ATA_HORKAGE_DMA_RW_ONLY;
+
 	if (ap->ops->dev_config)
 		ap->ops->dev_config(ap, dev);
 
@@ -3356,7 +3360,8 @@ static const struct ata_blacklist_entry 
 	{ "SAMSUNG CD-ROM SN-124","N001",	ATA_HORKAGE_NODMA },
 
 	/* Weird ATAPI devices */
-	{ "TORiSAN DVD-ROM DRD-N216", NULL,	ATA_HORKAGE_MAX_SEC_128 },
+	{ "TORiSAN DVD-ROM DRD-N216", NULL,	ATA_HORKAGE_MAX_SEC_128 |
+						ATA_HORKAGE_DMA_RW_ONLY },
 
 	/* Devices we expect to fail diagnostics */
 
@@ -3676,6 +3681,26 @@ int ata_check_atapi_dma(struct ata_queue
 	struct ata_port *ap = qc->ap;
 	int rc = 0; /* Assume ATAPI DMA is OK by default */
 
+	/* some drives can only do ATAPI DMA on read/write */
+	if (unlikely(qc->dev->horkage & ATA_HORKAGE_DMA_RW_ONLY)) {
+		struct scsi_cmnd *cmd = qc->scsicmd;
+		u8 *scsicmd = cmd->cmnd;
+
+		switch (scsicmd[0]) {
+		case READ_10:
+		case WRITE_10:
+		case READ_12:
+		case WRITE_12:
+		case READ_6:
+		case WRITE_6:
+			/* atapi dma maybe ok */
+			break;
+		default:
+			/* turn off atapi dma */
+			return 1;
+		}
+	}
+
 	if (ap->ops->check_atapi_dma)
 		rc = ap->ops->check_atapi_dma(qc);
 
diff -Nrup 03_max_sect/include/linux/libata.h 04_dma_rw_only/include/linux/libata.h
--- 03_max_sect/include/linux/libata.h	2007-04-02 10:56:59.000000000 +0800
+++ 04_dma_rw_only/include/linux/libata.h	2007-04-02 10:58:04.000000000 +0800
@@ -312,6 +312,7 @@ enum {
 	ATA_HORKAGE_NODMA	= (1 << 1),	/* DMA problems */
 	ATA_HORKAGE_NONCQ	= (1 << 2),	/* Don't use NCQ */
 	ATA_HORKAGE_MAX_SEC_128	= (1 << 3),	/* Limit max sects to 128 */
+	ATA_HORKAGE_DMA_RW_ONLY	= (1 << 4),	/* ATAPI DMA for RW only */
 };
 
 enum hsm_task_states {