From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Clark Subject: CD problems booting FC7 RC3 Date: Mon, 02 Apr 2007 15:58:19 -0400 Message-ID: <4611605B.6060601@seclark.us> Reply-To: Stephen.Clark@seclark.us Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from smtpauth02.prod.mesa1.secureserver.net ([64.202.165.182]:52731 "HELO smtpauth02.prod.mesa1.secureserver.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S965774AbXDBT6U (ORCPT ); Mon, 2 Apr 2007 15:58:20 -0400 Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Hi, When trying to boot FC7 RC3 on my HP N5430 laptop I get the following: ... Write protecting the kernel read-only data: 845k input: PS/2 Generic Mouse as /class/input/input2 SCSI subsystem initialized libata version 2.20 loaded. ACPI: Unable to derive IRQ for device 0000:00:0f.0 ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011000 irq 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011008 irq 15 scsi0 : pata_ali PM: Adding info for No Bus:host0 ata1.00: ATA-5: HITACHI_DK23CA-20, 00H1A0A3, max UDMA/100 ata1.00: 39070080 sectors, multi 16: LBA ata1.00: configured for UDMA/33 TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow: PowerNOW! Technology present. Can scale: frequency and voltage. powernow: SGTC: 10000 Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow: PowerNOW! Technology present. Can scale: frequency and voltage. powernow: SGTC: 10000 powernow: Minimum speed 300 MHz. Maximum speed 850 MHz. powernow-k8: Processor cpuid 670 not supported Using IPI No-Shortcut mode Magic number: 3:342:541 Freeing unused kernel memory: 248k freed Write protecting the kernel read-only data: 845k input: PS/2 Generic Mouse as /class/input/input2 SCSI subsystem initialized libata version 2.20 loaded. ACPI: Unable to derive IRQ for device 0000:00:0f.0 ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011000 irq 14 ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011008 irq 15 scsi0 : pata_ali PM: Adding info for No Bus:host0 ata1.00: ATA-5: HITACHI_DK23CA-20, 00H1A0A3, max UDMA/100 ata1.00: 39070080 sectors, multi 16: LBA ata1.00: configured for UDMA/33 scsi1 : pata_ali PM: Adding info for No Bus:host1 ata2.00: ATAPI, max UDMA/33 ata2.00: configured for UDMA/33 PM: Adding info for No Bus:target0:0:0 scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23CA-2 00H1 PQ: 0 ANSI: 5 PM: Adding info for scsi:0:0:0:0 PM: Adding info for No Bus:target1:0:0 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata2: soft resetting port ATA: abnormal status 0xD0 on port 0x00010177 ata2.00: failed to IDENTIFY (I/O error, err_mask=0x2) ata2.00: revalidation failed (errno=-5) ata2: failed to recover some devices, retrying in 5 secs ata2: port is slow to respond, please be patient (Status 0xd0) ata2: port failed to respond (30 secs, Status 0xd0) ata2: soft resetting port ATA: abnormal status 0xD0 on port 0x00010177 ata2.00: failed to IDENTIFY (I/O error, err_mask=0x2) ata2.00: revalidation failed (errno=-5) ata2.00: limiting speed to UDMA/33:PIO3 ata2: failed to recover some devices, retrying in 5 secs ata2: port is slow to respond, please be patient (Status 0xd0) ata2: port failed to respond (30 secs, Status 0xd0) ata2: soft resetting port ATA: abnormal status 0xD0 on port 0x00010177 ata2.00: failed to IDENTIFY (I/O error, err_mask=0x2) ata2.00: revalidation failed (errno=-5) ata2.00: disabled ata2: EH complete PM: Removing info for No Bus:target1:0:0 SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 39070080 512-byte hdwr sectors (20004 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda -------------------------------------- WARNING: Cannot find root file system! -------------------------------------- Create symlink /dev/root and then exit this shell to continue the boot sequence. bash: no job control in this shell bash-3.2# (END) -- "They that give up essential liberty to obtain temporary safety, deserve neither liberty nor safety." (Ben Franklin) "The course of history shows that as a government grows, liberty decreases." (Thomas Jefferson)