From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stephen Clark Subject: Re: CD problems booting FC7 RC3 Date: Tue, 03 Apr 2007 09:37:12 -0400 Message-ID: <46125888.2000907@seclark.us> References: <4611605B.6060601@seclark.us> <4611BE9A.1010109@tw.ibm.com> Reply-To: Stephen.Clark@seclark.us Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from smtpout04-01.prod.mesa1.secureserver.net ([64.202.165.196]:41885 "HELO smtpout04-01.prod.mesa1.secureserver.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S966177AbXDCNhO (ORCPT ); Tue, 3 Apr 2007 09:37:14 -0400 In-Reply-To: <4611BE9A.1010109@tw.ibm.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: albertl@mail.com Cc: linux-ide@vger.kernel.org Albert Lee wrote: >Stephen Clark wrote: > > >>Hi, >> >>When trying to boot FC7 RC3 on my HP N5430 laptop I get the following: >> >>... >>Write protecting the kernel read-only data: 845k >>input: PS/2 Generic Mouse as /class/input/input2 >>SCSI subsystem initialized >>libata version 2.20 loaded. >>ACPI: Unable to derive IRQ for device 0000:00:0f.0 >>ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI >>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011000 >>irq 14 >>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011008 >>irq 15 >>scsi0 : pata_ali >>PM: Adding info for No Bus:host0 >>ata1.00: ATA-5: HITACHI_DK23CA-20, 00H1A0A3, max UDMA/100 >>ata1.00: 39070080 sectors, multi 16: LBA >>ata1.00: configured for UDMA/33 >>TCP bic registered >>Initializing XFRM netlink socket >>NET: Registered protocol family 1 >>NET: Registered protocol family 17 >>powernow: PowerNOW! Technology present. Can scale: frequency and voltage. >>powernow: SGTC: 10000 >>Initializing XFRM netlink socket >>NET: Registered protocol family 1 >>NET: Registered protocol family 17 >>powernow: PowerNOW! Technology present. Can scale: frequency and voltage. >>powernow: SGTC: 10000 >>powernow: Minimum speed 300 MHz. Maximum speed 850 MHz. >>powernow-k8: Processor cpuid 670 not supported >>Using IPI No-Shortcut mode >> Magic number: 3:342:541 >>Freeing unused kernel memory: 248k freed >>Write protecting the kernel read-only data: 845k >>input: PS/2 Generic Mouse as /class/input/input2 >>SCSI subsystem initialized >>libata version 2.20 loaded. >>ACPI: Unable to derive IRQ for device 0000:00:0f.0 >>ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI >>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011000 >>irq 14 >>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011008 >>irq 15 >>scsi0 : pata_ali >>PM: Adding info for No Bus:host0 >>ata1.00: ATA-5: HITACHI_DK23CA-20, 00H1A0A3, max UDMA/100 >>ata1.00: 39070080 sectors, multi 16: LBA >>ata1.00: configured for UDMA/33 >>scsi1 : pata_ali >>PM: Adding info for No Bus:host1 >>ata2.00: ATAPI, max UDMA/33 >>ata2.00: configured for UDMA/33 >>PM: Adding info for No Bus:target0:0:0 >>scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23CA-2 00H1 PQ: 0 >>ANSI: 5 >>PM: Adding info for scsi:0:0:0:0 >>PM: Adding info for No Bus:target1:0:0 >>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen >>ata2.00: cmd a0/01:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 0x12 data 36 in >> res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) >> >> > >Looks similar to the AOpen timeout problem >(http://bugzilla.kernel.org/show_bug.cgi?id=8244) > >Please try the following patch >(http://marc.info/?l=linux-ide&m=117548454130046&q=raw) > >Thanks, > >Albert > > > > Hi Albert, Do you know if this patch has been put into the mainline kernel? I got this problem when trying to boot the Fedora Core 7 RC3 livecd - so I really can't make a new kernel and test it. Also it takes over an hour to build the kernel on my laptop, that is why I just use distributed kernels on it. Steve -- "They that give up essential liberty to obtain temporary safety, deserve neither liberty nor safety." (Ben Franklin) "The course of history shows that as a government grows, liberty decreases." (Thomas Jefferson)