* sata_mv BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
@ 2007-04-27 10:20 Tomasz Chmielewski
2007-05-23 9:03 ` Tomasz Chmielewski
0 siblings, 1 reply; 3+ messages in thread
From: Tomasz Chmielewski @ 2007-04-27 10:20 UTC (permalink / raw)
To: Linux IDE
[-- Attachment #1: Type: text/plain, Size: 1512 bytes --]
Today at night, I had a serious sata_mv driver failure on one of the
servers.
I tested the drive in question with both smart and badblocks, but none
shown any errors - so my quick conclusion is that something is not right
with the sata_mv driver.
The server has two drives; sda1 and sdb1 are connected into a RAID-1
array. 38 seconds after the failure started to happen, sda1 was kicked
out of RAID-1.
The server is also running IET (iSCSI Enterprise Target) from
http://iscsi-target.sf.net - unfortunately, most iSCSI initiators didn't
survive this failure, and were remounted ro.
I attach the log, perhaps it gives some more info to some of you? I hope
the log is not too big for this list (~50 kB).
execute_task_management, cmnd_abort and sess_param come from the
iscsi_trgt driver (IET).
The machine is running 2.6.20.1 x86 kernel from the moment it was
released, and there were never problems like that before.
After 2.6.20.1, sata_mv had following fixes according to the kernel
changelog:
2.6.20.5: Fix 50xx irq mask
2.6.20.5: don't touch reserved bits in EDMA config register
2.6.21: don't touch reserved bits in EDMA config register
2.6.21: fix pci_enable_msi() error handling
2.6.21: drivers/ata/sata_mv.c:2056:55: warning: Using plain integer as
NULL pointer
So basically, there were two important fixes, which first went to the
kernel in 2.6.20.5.
Is it possible that the issue was fixes then? Or, perhaps, there is
another explanation for that?
--
Tomasz Chmielewski
[-- Attachment #2: broken.log --]
[-- Type: text/x-log, Size: 50828 bytes --]
Apr 27 03:34:59 st kernel: ATA: abnormal status 0x7F on port 0xD092211C
Apr 27 03:34:59 st kernel: ATA: abnormal status 0x7F on port 0xD092211C
Apr 27 03:34:59 st kernel: ata1: translated ATA stat/err 0x7f/00 to SCSI SK/ASC/ASCQ 0x4/00/00
Apr 27 03:34:59 st kernel: ata1: status=0x7f { DriveReady DeviceFault SeekComplete DataRequest CorrectedError Index Error }
Apr 27 03:35:00 st kernel: ata1: translated ATA stat/err 0x80/00 to SCSI SK/ASC/ASCQ 0xb/47/00
Apr 27 03:35:00 st kernel: ata1: status=0x80 { Busy }
Apr 27 03:35:00 st kernel: BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
Apr 27 03:35:00 st kernel: [<c021be6b>] mv_qc_issue+0x97/0x10b
Apr 27 03:35:00 st kernel: [<c0212923>] ata_qc_issue+0x425/0x47b
Apr 27 03:35:00 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:35:00 st kernel: [<c0217204>] ata_scsi_translate+0xb5/0xfb
Apr 27 03:35:00 st kernel: [<c0110b35>] scheduler_tick+0xa/0x4d
Apr 27 03:35:00 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:35:00 st kernel: [<c0218430>] ata_scsi_queuecmd+0x107/0x10e
Apr 27 03:35:00 st kernel: [<c0216571>] ata_scsi_rw_xlat+0x0/0x1b6
Apr 27 03:35:00 st kernel: [<c02073d9>] scsi_dispatch_cmd+0x17a/0x1b5
Apr 27 03:35:00 st kernel: [<c020b1ae>] scsi_request_fn+0x1f2/0x273
Apr 27 03:35:00 st kernel: [<c01966ca>] blk_run_queue+0x2a/0x4b
Apr 27 03:35:00 st kernel: [<c020a92b>] scsi_queue_insert+0x4d/0x53
Apr 27 03:35:00 st kernel: [<c0196603>] blk_done_softirq+0x4a/0x55
Apr 27 03:35:00 st kernel: [<c01164d4>] __do_softirq+0x35/0x75
Apr 27 03:35:00 st kernel: [<c0116536>] do_softirq+0x22/0x26
Apr 27 03:35:00 st kernel: [<c0104e32>] do_IRQ+0x61/0x73
Apr 27 03:35:00 st kernel: [<c0113c48>] profile_tick+0x39/0x55
Apr 27 03:35:00 st kernel: [<c01034ab>] common_interrupt+0x23/0x28
Apr 27 03:35:00 st kernel: [<c0101b10>] default_idle+0x27/0x39
Apr 27 03:35:00 st kernel: [<c0101326>] cpu_idle+0x39/0x4e
Apr 27 03:35:00 st kernel: [<c031e69e>] start_kernel+0x2ee/0x2f2
Apr 27 03:35:00 st kernel: [<c031e1ae>] unknown_bootoption+0x0/0x202
Apr 27 03:35:00 st kernel: =======================
Apr 27 03:35:29 st kernel: execute_task_management(1212) b0a0040 1 40000067
Apr 27 03:35:29 st kernel: cmnd_abort(1143) 67000040 1 0 42 8192 0 0
Apr 27 03:35:30 st kernel: execute_task_management(1212) 50a0030 1 30000035
Apr 27 03:35:30 st kernel: cmnd_abort(1143) 35000030 1 0 42 8192 0 0
Apr 27 03:35:31 st kernel: execute_task_management(1212) 1f0a0000 1 10
Apr 27 03:35:31 st kernel: cmnd_abort(1143) 10000000 1 0 42 8192 0 0
Apr 27 03:35:31 st kernel: execute_task_management(1212) 1f0a0000 1 48
Apr 27 03:35:31 st kernel: cmnd_abort(1143) 48000000 1 0 42 4096 0 0
Apr 27 03:35:33 st kernel: execute_task_management(1212) 80a0030 1 3000004f
Apr 27 03:35:33 st kernel: cmnd_abort(1143) 4f000030 1 0 42 4096 0 0
Apr 27 03:35:34 st kernel: execute_task_management(1212) 40a0050 1 50000012
Apr 27 03:35:34 st kernel: cmnd_abort(1143) 12000050 1 0 42 4096 0 0
Apr 27 03:35:37 st kernel: ata1: Entering mv_eng_timeout
Apr 27 03:35:37 st kernel: mmio_base d0900000 ap cfb602bc qc cfb60cdc scsi_cmnd ce09ae40 &cmnd ce09ae78
Apr 27 03:35:37 st kernel: ata1: no sense translation for status: 0x40
Apr 27 03:35:37 st kernel: ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
Apr 27 03:35:37 st kernel: ata1: status=0x40 { DriveReady }
Apr 27 03:35:37 st kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Apr 27 03:35:37 st kernel: sda: Current [descriptor]: sense key=0xb
Apr 27 03:35:37 st kernel: ASC=0x0 ASCQ=0x0
Apr 27 03:35:37 st kernel: Descriptor sense data with sense descriptors (in hex):
Apr 27 03:35:37 st kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 27 03:35:37 st kernel: 00 80 80 80
Apr 27 03:35:37 st kernel: end_request: I/O error, dev sda, sector 93628215
Apr 27 03:35:37 st kernel: raid1: Disk failure on sda1, disabling device.
Apr 27 03:35:37 st kernel: ^IOperation continuing on 1 devices
Apr 27 03:35:37 st kernel: BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
Apr 27 03:35:37 st kernel: [<c021be6b>] mv_qc_issue+0x97/0x10b
Apr 27 03:35:37 st kernel: [<c0212923>] ata_qc_issue+0x425/0x47b
Apr 27 03:35:37 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:35:37 st kernel: [<c0217204>] ata_scsi_translate+0xb5/0xfb
Apr 27 03:35:37 st kernel: [<c020f59a>] sd_rw_intr+0x15d/0x186
Apr 27 03:35:37 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:35:37 st kernel: [<c0218430>] ata_scsi_queuecmd+0x107/0x10e
Apr 27 03:35:37 st kernel: [<c0216571>] ata_scsi_rw_xlat+0x0/0x1b6
Apr 27 03:35:37 st kernel: [<c02073d9>] scsi_dispatch_cmd+0x17a/0x1b5
Apr 27 03:35:37 st kernel: [<c020b1ae>] scsi_request_fn+0x1f2/0x273
Apr 27 03:35:37 st kernel: [<c01957ed>] blk_remove_plug+0x4e/0x5a
Apr 27 03:35:37 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:35:37 st kernel: [<c01966ca>] blk_run_queue+0x2a/0x4b
Apr 27 03:35:37 st kernel: [<c020a882>] scsi_run_host_queues+0x10/0x22
Apr 27 03:35:37 st kernel: [<c0209a25>] scsi_error_handler+0x55a/0x590
Apr 27 03:35:37 st kernel: [<c010fba4>] __wake_up_common+0x31/0x4f
Apr 27 03:35:37 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:35:37 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:35:37 st kernel: [<c0120ab4>] kthread+0xa0/0xc8
Apr 27 03:35:37 st kernel: [<c0120a14>] kthread+0x0/0xc8
Apr 27 03:35:37 st kernel: [<c010362b>] kernel_thread_helper+0x7/0x10
Apr 27 03:35:37 st kernel: =======================
Apr 27 03:35:37 st kernel: execute_task_management(1212) 170a0000 1 16
Apr 27 03:35:37 st kernel: cmnd_abort(1143) 16000000 1 0 40 0 0 0
Apr 27 03:35:37 st kernel: execute_task_management(1212) 30a0030 1 30000001
Apr 27 03:35:37 st kernel: cmnd_abort(1143) 1000030 1 0 40 0 0 0
Apr 27 03:35:39 st kernel: execute_task_management(1212) 1f0a0000 1 22
Apr 27 03:35:39 st kernel: cmnd_abort(1143) 22000000 1 0 42 4096 0 0
Apr 27 03:35:40 st kernel: execute_task_management(1212) 120a0020 1 20000026
Apr 27 03:35:40 st kernel: cmnd_abort(1143) 26000020 1 0 42 4096 0 0
Apr 27 03:35:40 st kernel: execute_task_management(1212) 1f0a0000 1 9
Apr 27 03:35:40 st kernel: cmnd_abort(1143) 9000000 1 0 42 8192 0 0
Apr 27 03:35:40 st kernel: execute_task_management(1212) 1f0a0000 1 22
Apr 27 03:35:40 st kernel: cmnd_abort(1143) 22000000 1 0 42 4096 0 0
Apr 27 03:35:42 st kernel: execute_task_management(1212) 1f0a0000 1 3e
Apr 27 03:35:42 st kernel: cmnd_abort(1143) 3e000000 1 0 42 4096 0 0
Apr 27 03:35:44 st kernel: execute_task_management(1212) 10a0000 1 75
Apr 27 03:35:44 st kernel: cmnd_abort(1143) 75000000 1 0 42 4096 0 0
Apr 27 03:35:55 st kernel: execute_task_management(1212) 1f0a0000 1 52
Apr 27 03:35:55 st kernel: cmnd_abort(1143) 52000000 1 0 42 16384 0 0
Apr 27 03:36:06 st kernel: execute_task_management(1212) 40a0010 1 10000058
Apr 27 03:36:06 st kernel: cmnd_abort(1143) 58000010 1 0 42 8192 0 0
Apr 27 03:36:07 st kernel: ata1: Entering mv_eng_timeout
Apr 27 03:36:07 st kernel: mmio_base d0900000 ap cfb602bc qc cfb60cdc scsi_cmnd cfa50080 &cmnd cfa500b8
Apr 27 03:36:07 st kernel: ata1: no sense translation for status: 0x40
Apr 27 03:36:07 st kernel: ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
Apr 27 03:36:07 st kernel: ata1: status=0x40 { DriveReady }
Apr 27 03:36:07 st kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Apr 27 03:36:07 st kernel: sda: Current [descriptor]: sense key=0xb
Apr 27 03:36:07 st kernel: ASC=0x0 ASCQ=0x0
Apr 27 03:36:07 st kernel: Descriptor sense data with sense descriptors (in hex):
Apr 27 03:36:07 st kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 27 03:36:07 st kernel: 00 80 80 80
Apr 27 03:36:07 st kernel: end_request: I/O error, dev sda, sector 36602303
Apr 27 03:36:07 st kernel: BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
Apr 27 03:36:07 st kernel: [<c021be6b>] mv_qc_issue+0x97/0x10b
Apr 27 03:36:07 st kernel: [<c0212923>] ata_qc_issue+0x425/0x47b
Apr 27 03:36:07 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:36:07 st kernel: [<c0217204>] ata_scsi_translate+0xb5/0xfb
Apr 27 03:36:07 st kernel: [<c020f59a>] sd_rw_intr+0x15d/0x186
Apr 27 03:36:07 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:36:07 st kernel: [<c0218430>] ata_scsi_queuecmd+0x107/0x10e
Apr 27 03:36:07 st kernel: [<c0216571>] ata_scsi_rw_xlat+0x0/0x1b6
Apr 27 03:36:07 st kernel: [<c02073d9>] scsi_dispatch_cmd+0x17a/0x1b5
Apr 27 03:36:07 st kernel: [<c020b1ae>] scsi_request_fn+0x1f2/0x273
Apr 27 03:36:07 st kernel: [<c01957ed>] blk_remove_plug+0x4e/0x5a
Apr 27 03:36:07 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:36:07 st kernel: [<c01966ca>] blk_run_queue+0x2a/0x4b
Apr 27 03:36:07 st kernel: [<c020a882>] scsi_run_host_queues+0x10/0x22
Apr 27 03:36:07 st kernel: [<c0209a25>] scsi_error_handler+0x55a/0x590
Apr 27 03:36:07 st kernel: [<c010fba4>] __wake_up_common+0x31/0x4f
Apr 27 03:36:07 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:36:07 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:36:07 st kernel: [<c0120ab4>] kthread+0xa0/0xc8
Apr 27 03:36:07 st kernel: [<c0120a14>] kthread+0x0/0xc8
Apr 27 03:36:07 st kernel: [<c010362b>] kernel_thread_helper+0x7/0x10
Apr 27 03:36:07 st kernel: =======================
Apr 27 03:36:38 st kernel: ata1: Entering mv_eng_timeout
Apr 27 03:36:38 st kernel: mmio_base d0900000 ap cfb602bc qc cfb60cdc scsi_cmnd cfa50080 &cmnd cfa500b8
Apr 27 03:36:38 st kernel: ata1: no sense translation for status: 0x40
Apr 27 03:36:38 st kernel: ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
Apr 27 03:36:38 st kernel: ata1: status=0x40 { DriveReady }
Apr 27 03:36:38 st kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Apr 27 03:36:38 st kernel: sda: Current [descriptor]: sense key=0xb
Apr 27 03:36:38 st kernel: ASC=0x0 ASCQ=0x0
Apr 27 03:36:38 st kernel: Descriptor sense data with sense descriptors (in hex):
Apr 27 03:36:38 st kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 27 03:36:38 st kernel: 00 80 80 80
Apr 27 03:36:38 st kernel: end_request: I/O error, dev sda, sector 35553727
Apr 27 03:36:38 st kernel: BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
Apr 27 03:36:38 st kernel: [<c021be6b>] mv_qc_issue+0x97/0x10b
Apr 27 03:36:38 st kernel: [<c0212923>] ata_qc_issue+0x425/0x47b
Apr 27 03:36:38 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:36:38 st kernel: [<c0217204>] ata_scsi_translate+0xb5/0xfb
Apr 27 03:36:38 st kernel: [<c020f59a>] sd_rw_intr+0x15d/0x186
Apr 27 03:36:38 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:36:38 st kernel: [<c0218430>] ata_scsi_queuecmd+0x107/0x10e
Apr 27 03:36:38 st kernel: [<c0216571>] ata_scsi_rw_xlat+0x0/0x1b6
Apr 27 03:36:38 st kernel: [<c02073d9>] scsi_dispatch_cmd+0x17a/0x1b5
Apr 27 03:36:38 st kernel: [<c020b1ae>] scsi_request_fn+0x1f2/0x273
Apr 27 03:36:38 st kernel: [<c01957ed>] blk_remove_plug+0x4e/0x5a
Apr 27 03:36:38 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:36:38 st kernel: [<c01966ca>] blk_run_queue+0x2a/0x4b
Apr 27 03:36:38 st kernel: [<c020a882>] scsi_run_host_queues+0x10/0x22
Apr 27 03:36:38 st kernel: [<c0209a25>] scsi_error_handler+0x55a/0x590
Apr 27 03:36:38 st kernel: [<c010fba4>] __wake_up_common+0x31/0x4f
Apr 27 03:36:38 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:36:38 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:36:38 st kernel: [<c0120ab4>] kthread+0xa0/0xc8
Apr 27 03:36:38 st kernel: [<c0120a14>] kthread+0x0/0xc8
Apr 27 03:36:38 st kernel: [<c010362b>] kernel_thread_helper+0x7/0x10
Apr 27 03:36:38 st kernel: =======================
Apr 27 03:37:09 st kernel: ata1: Entering mv_eng_timeout
Apr 27 03:37:09 st kernel: mmio_base d0900000 ap cfb602bc qc cfb60cdc scsi_cmnd ce09ae40 &cmnd ce09ae78
Apr 27 03:37:09 st kernel: ata1: no sense translation for status: 0x40
Apr 27 03:37:09 st kernel: ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
Apr 27 03:37:09 st kernel: ata1: status=0x40 { DriveReady }
Apr 27 03:37:09 st kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Apr 27 03:37:09 st kernel: sda: Current [descriptor]: sense key=0xb
Apr 27 03:37:09 st kernel: ASC=0x0 ASCQ=0x0
Apr 27 03:37:09 st kernel: Descriptor sense data with sense descriptors (in hex):
Apr 27 03:37:09 st kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 27 03:37:09 st kernel: 00 80 80 80
Apr 27 03:37:09 st kernel: end_request: I/O error, dev sda, sector 56440751
Apr 27 03:37:09 st kernel: BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
Apr 27 03:37:09 st kernel: [<c021be6b>] mv_qc_issue+0x97/0x10b
Apr 27 03:37:09 st kernel: [<c0212923>] ata_qc_issue+0x425/0x47b
Apr 27 03:37:09 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:37:09 st kernel: [<c0217204>] ata_scsi_translate+0xb5/0xfb
Apr 27 03:37:09 st kernel: [<c020f59a>] sd_rw_intr+0x15d/0x186
Apr 27 03:37:09 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:37:09 st kernel: [<c0218430>] ata_scsi_queuecmd+0x107/0x10e
Apr 27 03:37:09 st kernel: [<c0216571>] ata_scsi_rw_xlat+0x0/0x1b6
Apr 27 03:37:09 st kernel: [<c02073d9>] scsi_dispatch_cmd+0x17a/0x1b5
Apr 27 03:37:09 st kernel: [<c020b1ae>] scsi_request_fn+0x1f2/0x273
Apr 27 03:37:09 st kernel: [<c01957ed>] blk_remove_plug+0x4e/0x5a
Apr 27 03:37:09 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:37:09 st kernel: [<c01966ca>] blk_run_queue+0x2a/0x4b
Apr 27 03:37:09 st kernel: [<c020a882>] scsi_run_host_queues+0x10/0x22
Apr 27 03:37:09 st kernel: [<c0209a25>] scsi_error_handler+0x55a/0x590
Apr 27 03:37:09 st kernel: [<c010fba4>] __wake_up_common+0x31/0x4f
Apr 27 03:37:09 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:37:09 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:37:09 st kernel: [<c0120ab4>] kthread+0xa0/0xc8
Apr 27 03:37:09 st kernel: [<c0120a14>] kthread+0x0/0xc8
Apr 27 03:37:09 st kernel: [<c010362b>] kernel_thread_helper+0x7/0x10
Apr 27 03:37:09 st kernel: =======================
Apr 27 03:37:39 st kernel: ata1: Entering mv_eng_timeout
Apr 27 03:37:39 st kernel: mmio_base d0900000 ap cfb602bc qc cfb60cdc scsi_cmnd cfa50080 &cmnd cfa500b8
Apr 27 03:37:39 st kernel: ata1: no sense translation for status: 0x40
Apr 27 03:37:39 st kernel: ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
Apr 27 03:37:39 st kernel: ata1: status=0x40 { DriveReady }
Apr 27 03:37:39 st kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Apr 27 03:37:39 st kernel: sda: Current [descriptor]: sense key=0xb
Apr 27 03:37:39 st kernel: ASC=0x0 ASCQ=0x0
Apr 27 03:37:39 st kernel: Descriptor sense data with sense descriptors (in hex):
Apr 27 03:37:39 st kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 27 03:37:39 st kernel: 00 80 80 80
Apr 27 03:37:39 st kernel: end_request: I/O error, dev sda, sector 94937535
Apr 27 03:37:39 st kernel: BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
Apr 27 03:37:39 st kernel: [<c021be6b>] mv_qc_issue+0x97/0x10b
Apr 27 03:37:39 st kernel: [<c0212923>] ata_qc_issue+0x425/0x47b
Apr 27 03:37:39 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:37:39 st kernel: [<c0217204>] ata_scsi_translate+0xb5/0xfb
Apr 27 03:37:39 st kernel: [<c020f59a>] sd_rw_intr+0x15d/0x186
Apr 27 03:37:39 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:37:39 st kernel: [<c0218430>] ata_scsi_queuecmd+0x107/0x10e
Apr 27 03:37:39 st kernel: [<c0216571>] ata_scsi_rw_xlat+0x0/0x1b6
Apr 27 03:37:39 st kernel: [<c02073d9>] scsi_dispatch_cmd+0x17a/0x1b5
Apr 27 03:37:39 st kernel: [<c020b1ae>] scsi_request_fn+0x1f2/0x273
Apr 27 03:37:39 st kernel: [<c01957ed>] blk_remove_plug+0x4e/0x5a
Apr 27 03:37:39 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:37:39 st kernel: [<c01966ca>] blk_run_queue+0x2a/0x4b
Apr 27 03:37:39 st kernel: [<c020a882>] scsi_run_host_queues+0x10/0x22
Apr 27 03:37:39 st kernel: [<c0209a25>] scsi_error_handler+0x55a/0x590
Apr 27 03:37:39 st kernel: [<c010fba4>] __wake_up_common+0x31/0x4f
Apr 27 03:37:39 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:37:39 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:37:39 st kernel: [<c0120ab4>] kthread+0xa0/0xc8
Apr 27 03:37:39 st kernel: [<c0120a14>] kthread+0x0/0xc8
Apr 27 03:37:39 st kernel: [<c010362b>] kernel_thread_helper+0x7/0x10
Apr 27 03:37:39 st kernel: =======================
Apr 27 03:38:10 st kernel: ata1: Entering mv_eng_timeout
Apr 27 03:38:10 st kernel: mmio_base d0900000 ap cfb602bc qc cfb60cdc scsi_cmnd ce09ae40 &cmnd ce09ae78
Apr 27 03:38:10 st kernel: ata1: no sense translation for status: 0x40
Apr 27 03:38:10 st kernel: ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
Apr 27 03:38:10 st kernel: ata1: status=0x40 { DriveReady }
Apr 27 03:38:10 st kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Apr 27 03:38:10 st kernel: sda: Current [descriptor]: sense key=0xb
Apr 27 03:38:10 st kernel: ASC=0x0 ASCQ=0x0
Apr 27 03:38:10 st kernel: Descriptor sense data with sense descriptors (in hex):
Apr 27 03:38:10 st kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 27 03:38:10 st kernel: 00 80 80 80
Apr 27 03:38:10 st kernel: end_request: I/O error, dev sda, sector 94937887
Apr 27 03:38:10 st kernel: BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
Apr 27 03:38:10 st kernel: [<c021be6b>] mv_qc_issue+0x97/0x10b
Apr 27 03:38:10 st kernel: [<c0212923>] ata_qc_issue+0x425/0x47b
Apr 27 03:38:10 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:38:10 st kernel: [<c0217204>] ata_scsi_translate+0xb5/0xfb
Apr 27 03:38:10 st kernel: [<c020f59a>] sd_rw_intr+0x15d/0x186
Apr 27 03:38:10 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:38:10 st kernel: [<c0218430>] ata_scsi_queuecmd+0x107/0x10e
Apr 27 03:38:10 st kernel: [<c0216571>] ata_scsi_rw_xlat+0x0/0x1b6
Apr 27 03:38:10 st kernel: [<c02073d9>] scsi_dispatch_cmd+0x17a/0x1b5
Apr 27 03:38:10 st kernel: [<c020b1ae>] scsi_request_fn+0x1f2/0x273
Apr 27 03:38:10 st kernel: [<c01957ed>] blk_remove_plug+0x4e/0x5a
Apr 27 03:38:10 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:38:10 st kernel: [<c01966ca>] blk_run_queue+0x2a/0x4b
Apr 27 03:38:10 st kernel: [<c020a882>] scsi_run_host_queues+0x10/0x22
Apr 27 03:38:10 st kernel: [<c0209a25>] scsi_error_handler+0x55a/0x590
Apr 27 03:38:10 st kernel: [<c010fba4>] __wake_up_common+0x31/0x4f
Apr 27 03:38:10 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:38:10 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:38:10 st kernel: [<c0120ab4>] kthread+0xa0/0xc8
Apr 27 03:38:10 st kernel: [<c0120a14>] kthread+0x0/0xc8
Apr 27 03:38:10 st kernel: [<c010362b>] kernel_thread_helper+0x7/0x10
Apr 27 03:38:10 st kernel: =======================
Apr 27 03:38:41 st kernel: ata1: Entering mv_eng_timeout
Apr 27 03:38:41 st kernel: mmio_base d0900000 ap cfb602bc qc cfb60cdc scsi_cmnd ce09ae40 &cmnd ce09ae78
Apr 27 03:38:41 st kernel: ata1: no sense translation for status: 0x40
Apr 27 03:38:41 st kernel: ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
Apr 27 03:38:41 st kernel: ata1: status=0x40 { DriveReady }
Apr 27 03:38:41 st kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Apr 27 03:38:41 st kernel: sda: Current [descriptor]: sense key=0xb
Apr 27 03:38:41 st kernel: ASC=0x0 ASCQ=0x0
Apr 27 03:38:41 st kernel: Descriptor sense data with sense descriptors (in hex):
Apr 27 03:38:41 st kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 27 03:38:41 st kernel: 00 80 80 80
Apr 27 03:38:41 st kernel: end_request: I/O error, dev sda, sector 22886031
Apr 27 03:38:41 st kernel: BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
Apr 27 03:38:41 st kernel: [<c021be6b>] mv_qc_issue+0x97/0x10b
Apr 27 03:38:41 st kernel: [<c0212923>] ata_qc_issue+0x425/0x47b
Apr 27 03:38:41 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:38:41 st kernel: [<c0217204>] ata_scsi_translate+0xb5/0xfb
Apr 27 03:38:41 st kernel: [<c020f59a>] sd_rw_intr+0x15d/0x186
Apr 27 03:38:41 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:38:41 st kernel: [<c0218430>] ata_scsi_queuecmd+0x107/0x10e
Apr 27 03:38:41 st kernel: [<c0216571>] ata_scsi_rw_xlat+0x0/0x1b6
Apr 27 03:38:41 st kernel: [<c02073d9>] scsi_dispatch_cmd+0x17a/0x1b5
Apr 27 03:38:41 st kernel: [<c020b1ae>] scsi_request_fn+0x1f2/0x273
Apr 27 03:38:41 st kernel: [<c01957ed>] blk_remove_plug+0x4e/0x5a
Apr 27 03:38:41 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:38:41 st kernel: [<c01966ca>] blk_run_queue+0x2a/0x4b
Apr 27 03:38:41 st kernel: [<c020a882>] scsi_run_host_queues+0x10/0x22
Apr 27 03:38:41 st kernel: [<c0209a25>] scsi_error_handler+0x55a/0x590
Apr 27 03:38:41 st kernel: [<c010fba4>] __wake_up_common+0x31/0x4f
Apr 27 03:38:41 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:38:41 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:38:41 st kernel: [<c0120ab4>] kthread+0xa0/0xc8
Apr 27 03:38:41 st kernel: [<c0120a14>] kthread+0x0/0xc8
Apr 27 03:38:41 st kernel: [<c010362b>] kernel_thread_helper+0x7/0x10
Apr 27 03:38:41 st kernel: =======================
Apr 27 03:39:11 st kernel: ata1: Entering mv_eng_timeout
Apr 27 03:39:11 st kernel: mmio_base d0900000 ap cfb602bc qc cfb60cdc scsi_cmnd ce09ae40 &cmnd ce09ae78
Apr 27 03:39:11 st kernel: ata1: no sense translation for status: 0x40
Apr 27 03:39:11 st kernel: ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
Apr 27 03:39:11 st kernel: ata1: status=0x40 { DriveReady }
Apr 27 03:39:11 st kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Apr 27 03:39:11 st kernel: sda: Current [descriptor]: sense key=0xb
Apr 27 03:39:11 st kernel: ASC=0x0 ASCQ=0x0
Apr 27 03:39:11 st kernel: Descriptor sense data with sense descriptors (in hex):
Apr 27 03:39:11 st kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 27 03:39:11 st kernel: 00 80 80 80
Apr 27 03:39:11 st kernel: end_request: I/O error, dev sda, sector 61709151
Apr 27 03:39:11 st kernel: BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
Apr 27 03:39:11 st kernel: [<c021be6b>] mv_qc_issue+0x97/0x10b
Apr 27 03:39:11 st kernel: [<c0212923>] ata_qc_issue+0x425/0x47b
Apr 27 03:39:11 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:39:11 st kernel: [<c0217204>] ata_scsi_translate+0xb5/0xfb
Apr 27 03:39:11 st kernel: [<c020f59a>] sd_rw_intr+0x15d/0x186
Apr 27 03:39:11 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:39:11 st kernel: [<c0218430>] ata_scsi_queuecmd+0x107/0x10e
Apr 27 03:39:11 st kernel: [<c0216571>] ata_scsi_rw_xlat+0x0/0x1b6
Apr 27 03:39:11 st kernel: [<c02073d9>] scsi_dispatch_cmd+0x17a/0x1b5
Apr 27 03:39:11 st kernel: [<c020b1ae>] scsi_request_fn+0x1f2/0x273
Apr 27 03:39:11 st kernel: [<c01957ed>] blk_remove_plug+0x4e/0x5a
Apr 27 03:39:11 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:39:11 st kernel: [<c01966ca>] blk_run_queue+0x2a/0x4b
Apr 27 03:39:11 st kernel: [<c020a882>] scsi_run_host_queues+0x10/0x22
Apr 27 03:39:11 st kernel: [<c0209a25>] scsi_error_handler+0x55a/0x590
Apr 27 03:39:11 st kernel: [<c010fba4>] __wake_up_common+0x31/0x4f
Apr 27 03:39:11 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:39:11 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:39:11 st kernel: [<c0120ab4>] kthread+0xa0/0xc8
Apr 27 03:39:11 st kernel: [<c0120a14>] kthread+0x0/0xc8
Apr 27 03:39:11 st kernel: [<c010362b>] kernel_thread_helper+0x7/0x10
Apr 27 03:39:11 st kernel: =======================
Apr 27 03:39:42 st kernel: ata1: Entering mv_eng_timeout
Apr 27 03:39:42 st kernel: mmio_base d0900000 ap cfb602bc qc cfb60cdc scsi_cmnd cfa50080 &cmnd cfa500b8
Apr 27 03:39:42 st kernel: ata1: no sense translation for status: 0x40
Apr 27 03:39:42 st kernel: ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
Apr 27 03:39:42 st kernel: ata1: status=0x40 { DriveReady }
Apr 27 03:39:42 st kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Apr 27 03:39:42 st kernel: sda: Current [descriptor]: sense key=0xb
Apr 27 03:39:42 st kernel: ASC=0x0 ASCQ=0x0
Apr 27 03:39:42 st kernel: Descriptor sense data with sense descriptors (in hex):
Apr 27 03:39:42 st kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 27 03:39:42 st kernel: 00 80 80 80
Apr 27 03:39:42 st kernel: end_request: I/O error, dev sda, sector 94937903
Apr 27 03:39:42 st kernel: BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
Apr 27 03:39:42 st kernel: [<c021be6b>] mv_qc_issue+0x97/0x10b
Apr 27 03:39:42 st kernel: [<c0212923>] ata_qc_issue+0x425/0x47b
Apr 27 03:39:42 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:39:42 st kernel: [<c0217204>] ata_scsi_translate+0xb5/0xfb
Apr 27 03:39:42 st kernel: [<c020f59a>] sd_rw_intr+0x15d/0x186
Apr 27 03:39:42 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:39:42 st kernel: [<c0218430>] ata_scsi_queuecmd+0x107/0x10e
Apr 27 03:39:42 st kernel: [<c0216571>] ata_scsi_rw_xlat+0x0/0x1b6
Apr 27 03:39:42 st kernel: [<c02073d9>] scsi_dispatch_cmd+0x17a/0x1b5
Apr 27 03:39:42 st kernel: [<c020b1ae>] scsi_request_fn+0x1f2/0x273
Apr 27 03:39:42 st kernel: [<c01957ed>] blk_remove_plug+0x4e/0x5a
Apr 27 03:39:42 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:39:42 st kernel: [<c01966ca>] blk_run_queue+0x2a/0x4b
Apr 27 03:39:42 st kernel: [<c020a882>] scsi_run_host_queues+0x10/0x22
Apr 27 03:39:42 st kernel: [<c0209a25>] scsi_error_handler+0x55a/0x590
Apr 27 03:39:42 st kernel: [<c010fba4>] __wake_up_common+0x31/0x4f
Apr 27 03:39:42 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:39:42 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:39:42 st kernel: [<c0120ab4>] kthread+0xa0/0xc8
Apr 27 03:39:42 st kernel: [<c0120a14>] kthread+0x0/0xc8
Apr 27 03:39:42 st kernel: [<c010362b>] kernel_thread_helper+0x7/0x10
Apr 27 03:39:42 st kernel: =======================
Apr 27 03:40:13 st kernel: ata1: Entering mv_eng_timeout
Apr 27 03:40:13 st kernel: mmio_base d0900000 ap cfb602bc qc cfb60cdc scsi_cmnd ce09ae40 &cmnd ce09ae78
Apr 27 03:40:13 st kernel: ata1: no sense translation for status: 0x40
Apr 27 03:40:13 st kernel: ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
Apr 27 03:40:13 st kernel: ata1: status=0x40 { DriveReady }
Apr 27 03:40:13 st kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Apr 27 03:40:13 st kernel: sda: Current [descriptor]: sense key=0xb
Apr 27 03:40:13 st kernel: ASC=0x0 ASCQ=0x0
Apr 27 03:40:13 st kernel: Descriptor sense data with sense descriptors (in hex):
Apr 27 03:40:13 st kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 27 03:40:13 st kernel: 00 80 80 80
Apr 27 03:40:13 st kernel: end_request: I/O error, dev sda, sector 17234399
Apr 27 03:40:13 st kernel: BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
Apr 27 03:40:13 st kernel: [<c021be6b>] mv_qc_issue+0x97/0x10b
Apr 27 03:40:13 st kernel: [<c0212923>] ata_qc_issue+0x425/0x47b
Apr 27 03:40:13 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:40:13 st kernel: [<c0217204>] ata_scsi_translate+0xb5/0xfb
Apr 27 03:40:13 st kernel: [<c020f59a>] sd_rw_intr+0x15d/0x186
Apr 27 03:40:13 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:40:13 st kernel: [<c0218430>] ata_scsi_queuecmd+0x107/0x10e
Apr 27 03:40:13 st kernel: [<c0216571>] ata_scsi_rw_xlat+0x0/0x1b6
Apr 27 03:40:13 st kernel: [<c02073d9>] scsi_dispatch_cmd+0x17a/0x1b5
Apr 27 03:40:13 st kernel: [<c020b1ae>] scsi_request_fn+0x1f2/0x273
Apr 27 03:40:13 st kernel: [<c01957ed>] blk_remove_plug+0x4e/0x5a
Apr 27 03:40:13 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:40:13 st kernel: [<c01966ca>] blk_run_queue+0x2a/0x4b
Apr 27 03:40:13 st kernel: [<c020a882>] scsi_run_host_queues+0x10/0x22
Apr 27 03:40:13 st kernel: [<c0209a25>] scsi_error_handler+0x55a/0x590
Apr 27 03:40:13 st kernel: [<c010fba4>] __wake_up_common+0x31/0x4f
Apr 27 03:40:13 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:40:13 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:40:13 st kernel: [<c0120ab4>] kthread+0xa0/0xc8
Apr 27 03:40:13 st kernel: [<c0120a14>] kthread+0x0/0xc8
Apr 27 03:40:13 st kernel: [<c010362b>] kernel_thread_helper+0x7/0x10
Apr 27 03:40:13 st kernel: =======================
Apr 27 03:40:43 st kernel: ata1: Entering mv_eng_timeout
Apr 27 03:40:43 st kernel: mmio_base d0900000 ap cfb602bc qc cfb60cdc scsi_cmnd cfa50080 &cmnd cfa500b8
Apr 27 03:40:43 st kernel: ata1: no sense translation for status: 0x40
Apr 27 03:40:43 st kernel: ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
Apr 27 03:40:43 st kernel: ata1: status=0x40 { DriveReady }
Apr 27 03:40:43 st kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Apr 27 03:40:43 st kernel: sda: Current [descriptor]: sense key=0xb
Apr 27 03:40:43 st kernel: ASC=0x0 ASCQ=0x0
Apr 27 03:40:43 st kernel: Descriptor sense data with sense descriptors (in hex):
Apr 27 03:40:43 st kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 27 03:40:43 st kernel: 00 80 80 80
Apr 27 03:40:43 st kernel: end_request: I/O error, dev sda, sector 22585591
Apr 27 03:40:43 st kernel: BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
Apr 27 03:40:43 st kernel: [<c021be6b>] mv_qc_issue+0x97/0x10b
Apr 27 03:40:43 st kernel: [<c0212923>] ata_qc_issue+0x425/0x47b
Apr 27 03:40:43 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:40:43 st kernel: [<c0217204>] ata_scsi_translate+0xb5/0xfb
Apr 27 03:40:43 st kernel: [<c020f59a>] sd_rw_intr+0x15d/0x186
Apr 27 03:40:43 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:40:43 st kernel: [<c0218430>] ata_scsi_queuecmd+0x107/0x10e
Apr 27 03:40:43 st kernel: [<c0216571>] ata_scsi_rw_xlat+0x0/0x1b6
Apr 27 03:40:43 st kernel: [<c02073d9>] scsi_dispatch_cmd+0x17a/0x1b5
Apr 27 03:40:43 st kernel: [<c020b1ae>] scsi_request_fn+0x1f2/0x273
Apr 27 03:40:43 st kernel: [<c01957ed>] blk_remove_plug+0x4e/0x5a
Apr 27 03:40:43 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:40:43 st kernel: [<c01966ca>] blk_run_queue+0x2a/0x4b
Apr 27 03:40:43 st kernel: [<c020a882>] scsi_run_host_queues+0x10/0x22
Apr 27 03:40:43 st kernel: [<c0209a25>] scsi_error_handler+0x55a/0x590
Apr 27 03:40:43 st kernel: [<c010fba4>] __wake_up_common+0x31/0x4f
Apr 27 03:40:43 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:40:43 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:40:43 st kernel: [<c0120ab4>] kthread+0xa0/0xc8
Apr 27 03:40:43 st kernel: [<c0120a14>] kthread+0x0/0xc8
Apr 27 03:40:43 st kernel: [<c010362b>] kernel_thread_helper+0x7/0x10
Apr 27 03:40:43 st kernel: =======================
Apr 27 03:41:14 st kernel: ata1: Entering mv_eng_timeout
Apr 27 03:41:14 st kernel: mmio_base d0900000 ap cfb602bc qc cfb60cdc scsi_cmnd cfa50080 &cmnd cfa500b8
Apr 27 03:41:14 st kernel: ata1: no sense translation for status: 0x40
Apr 27 03:41:14 st kernel: ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
Apr 27 03:41:14 st kernel: ata1: status=0x40 { DriveReady }
Apr 27 03:41:14 st kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Apr 27 03:41:14 st kernel: sda: Current [descriptor]: sense key=0xb
Apr 27 03:41:14 st kernel: ASC=0x0 ASCQ=0x0
Apr 27 03:41:14 st kernel: Descriptor sense data with sense descriptors (in hex):
Apr 27 03:41:14 st kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 27 03:41:14 st kernel: 00 80 80 80
Apr 27 03:41:14 st kernel: end_request: I/O error, dev sda, sector 94938655
Apr 27 03:41:14 st kernel: BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
Apr 27 03:41:14 st kernel: [<c021be6b>] mv_qc_issue+0x97/0x10b
Apr 27 03:41:14 st kernel: [<c0212923>] ata_qc_issue+0x425/0x47b
Apr 27 03:41:14 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:41:14 st kernel: [<c0217204>] ata_scsi_translate+0xb5/0xfb
Apr 27 03:41:14 st kernel: [<c020f59a>] sd_rw_intr+0x15d/0x186
Apr 27 03:41:14 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:41:14 st kernel: [<c0218430>] ata_scsi_queuecmd+0x107/0x10e
Apr 27 03:41:14 st kernel: [<c0216571>] ata_scsi_rw_xlat+0x0/0x1b6
Apr 27 03:41:14 st kernel: [<c02073d9>] scsi_dispatch_cmd+0x17a/0x1b5
Apr 27 03:41:14 st kernel: [<c020b1ae>] scsi_request_fn+0x1f2/0x273
Apr 27 03:41:14 st kernel: [<c01957ed>] blk_remove_plug+0x4e/0x5a
Apr 27 03:41:14 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:41:14 st kernel: [<c01966ca>] blk_run_queue+0x2a/0x4b
Apr 27 03:41:14 st kernel: [<c020a882>] scsi_run_host_queues+0x10/0x22
Apr 27 03:41:14 st kernel: [<c0209a25>] scsi_error_handler+0x55a/0x590
Apr 27 03:41:14 st kernel: [<c010fba4>] __wake_up_common+0x31/0x4f
Apr 27 03:41:14 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:41:14 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:41:14 st kernel: [<c0120ab4>] kthread+0xa0/0xc8
Apr 27 03:41:14 st kernel: [<c0120a14>] kthread+0x0/0xc8
Apr 27 03:41:14 st kernel: [<c010362b>] kernel_thread_helper+0x7/0x10
Apr 27 03:41:14 st kernel: =======================
Apr 27 03:41:44 st kernel: ata1: Entering mv_eng_timeout
Apr 27 03:41:44 st kernel: mmio_base d0900000 ap cfb602bc qc cfb60cdc scsi_cmnd cfa50080 &cmnd cfa500b8
Apr 27 03:41:44 st kernel: ata1: no sense translation for status: 0x40
Apr 27 03:41:44 st kernel: ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
Apr 27 03:41:44 st kernel: ata1: status=0x40 { DriveReady }
Apr 27 03:41:44 st kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Apr 27 03:41:44 st kernel: sda: Current [descriptor]: sense key=0xb
Apr 27 03:41:44 st kernel: ASC=0x0 ASCQ=0x0
Apr 27 03:41:44 st kernel: Descriptor sense data with sense descriptors (in hex):
Apr 27 03:41:44 st kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 27 03:41:44 st kernel: 00 80 80 80
Apr 27 03:41:44 st kernel: end_request: I/O error, dev sda, sector 206268759
Apr 27 03:41:44 st kernel: BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
Apr 27 03:41:44 st kernel: [<c021be6b>] mv_qc_issue+0x97/0x10b
Apr 27 03:41:44 st kernel: [<c0212923>] ata_qc_issue+0x425/0x47b
Apr 27 03:41:44 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:41:44 st kernel: [<c0217204>] ata_scsi_translate+0xb5/0xfb
Apr 27 03:41:44 st kernel: [<c020f59a>] sd_rw_intr+0x15d/0x186
Apr 27 03:41:44 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:41:44 st kernel: [<c0218430>] ata_scsi_queuecmd+0x107/0x10e
Apr 27 03:41:44 st kernel: [<c0216571>] ata_scsi_rw_xlat+0x0/0x1b6
Apr 27 03:41:44 st kernel: [<c02073d9>] scsi_dispatch_cmd+0x17a/0x1b5
Apr 27 03:41:44 st kernel: [<c020b1ae>] scsi_request_fn+0x1f2/0x273
Apr 27 03:41:44 st kernel: [<c01957ed>] blk_remove_plug+0x4e/0x5a
Apr 27 03:41:44 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:41:44 st kernel: [<c01966ca>] blk_run_queue+0x2a/0x4b
Apr 27 03:41:44 st kernel: [<c020a882>] scsi_run_host_queues+0x10/0x22
Apr 27 03:41:44 st kernel: [<c0209a25>] scsi_error_handler+0x55a/0x590
Apr 27 03:41:44 st kernel: [<c010fba4>] __wake_up_common+0x31/0x4f
Apr 27 03:41:44 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:41:44 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:41:44 st kernel: [<c0120ab4>] kthread+0xa0/0xc8
Apr 27 03:41:44 st kernel: [<c0120a14>] kthread+0x0/0xc8
Apr 27 03:41:44 st kernel: [<c010362b>] kernel_thread_helper+0x7/0x10
Apr 27 03:41:44 st kernel: =======================
Apr 27 03:42:15 st kernel: ata1: Entering mv_eng_timeout
Apr 27 03:42:15 st kernel: mmio_base d0900000 ap cfb602bc qc cfb60cdc scsi_cmnd ce09ae40 &cmnd ce09ae78
Apr 27 03:42:15 st kernel: ata1: no sense translation for status: 0x40
Apr 27 03:42:15 st kernel: ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
Apr 27 03:42:15 st kernel: ata1: status=0x40 { DriveReady }
Apr 27 03:42:15 st kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Apr 27 03:42:15 st kernel: sda: Current [descriptor]: sense key=0xb
Apr 27 03:42:15 st kernel: ASC=0x0 ASCQ=0x0
Apr 27 03:42:15 st kernel: Descriptor sense data with sense descriptors (in hex):
Apr 27 03:42:15 st kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 27 03:42:15 st kernel: 00 80 80 80
Apr 27 03:42:15 st kernel: end_request: I/O error, dev sda, sector 206269839
Apr 27 03:42:15 st kernel: BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
Apr 27 03:42:15 st kernel: [<c021be6b>] mv_qc_issue+0x97/0x10b
Apr 27 03:42:15 st kernel: [<c0212923>] ata_qc_issue+0x425/0x47b
Apr 27 03:42:15 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:42:15 st kernel: [<c0217204>] ata_scsi_translate+0xb5/0xfb
Apr 27 03:42:15 st kernel: [<c020f59a>] sd_rw_intr+0x15d/0x186
Apr 27 03:42:15 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:42:15 st kernel: [<c0218430>] ata_scsi_queuecmd+0x107/0x10e
Apr 27 03:42:15 st kernel: [<c0216571>] ata_scsi_rw_xlat+0x0/0x1b6
Apr 27 03:42:15 st kernel: [<c02073d9>] scsi_dispatch_cmd+0x17a/0x1b5
Apr 27 03:42:15 st kernel: [<c020b1ae>] scsi_request_fn+0x1f2/0x273
Apr 27 03:42:15 st kernel: [<c01957ed>] blk_remove_plug+0x4e/0x5a
Apr 27 03:42:15 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:42:15 st kernel: [<c01966ca>] blk_run_queue+0x2a/0x4b
Apr 27 03:42:15 st kernel: [<c020a882>] scsi_run_host_queues+0x10/0x22
Apr 27 03:42:15 st kernel: [<c0209a25>] scsi_error_handler+0x55a/0x590
Apr 27 03:42:15 st kernel: [<c010fba4>] __wake_up_common+0x31/0x4f
Apr 27 03:42:15 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:42:15 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:42:15 st kernel: [<c0120ab4>] kthread+0xa0/0xc8
Apr 27 03:42:15 st kernel: [<c0120a14>] kthread+0x0/0xc8
Apr 27 03:42:15 st kernel: [<c010362b>] kernel_thread_helper+0x7/0x10
Apr 27 03:42:15 st kernel: =======================
Apr 27 03:42:46 st kernel: ata1: Entering mv_eng_timeout
Apr 27 03:42:46 st kernel: mmio_base d0900000 ap cfb602bc qc cfb60cdc scsi_cmnd cfa50080 &cmnd cfa500b8
Apr 27 03:42:46 st kernel: ata1: no sense translation for status: 0x40
Apr 27 03:42:46 st kernel: ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
Apr 27 03:42:46 st kernel: ata1: status=0x40 { DriveReady }
Apr 27 03:42:46 st kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Apr 27 03:42:46 st kernel: sda: Current [descriptor]: sense key=0xb
Apr 27 03:42:46 st kernel: ASC=0x0 ASCQ=0x0
Apr 27 03:42:46 st kernel: Descriptor sense data with sense descriptors (in hex):
Apr 27 03:42:46 st kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 27 03:42:46 st kernel: 00 80 80 80
Apr 27 03:42:46 st kernel: end_request: I/O error, dev sda, sector 246047223
Apr 27 03:42:46 st kernel: BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
Apr 27 03:42:46 st kernel: [<c021be6b>] mv_qc_issue+0x97/0x10b
Apr 27 03:42:46 st kernel: [<c0212923>] ata_qc_issue+0x425/0x47b
Apr 27 03:42:46 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:42:46 st kernel: [<c0217204>] ata_scsi_translate+0xb5/0xfb
Apr 27 03:42:46 st kernel: [<c020f59a>] sd_rw_intr+0x15d/0x186
Apr 27 03:42:46 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:42:46 st kernel: [<c0218430>] ata_scsi_queuecmd+0x107/0x10e
Apr 27 03:42:46 st kernel: [<c0216571>] ata_scsi_rw_xlat+0x0/0x1b6
Apr 27 03:42:46 st kernel: [<c02073d9>] scsi_dispatch_cmd+0x17a/0x1b5
Apr 27 03:42:46 st kernel: [<c020b1ae>] scsi_request_fn+0x1f2/0x273
Apr 27 03:42:46 st kernel: [<c01957ed>] blk_remove_plug+0x4e/0x5a
Apr 27 03:42:46 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:42:46 st kernel: [<c01966ca>] blk_run_queue+0x2a/0x4b
Apr 27 03:42:46 st kernel: [<c020a882>] scsi_run_host_queues+0x10/0x22
Apr 27 03:42:46 st kernel: [<c0209a25>] scsi_error_handler+0x55a/0x590
Apr 27 03:42:46 st kernel: [<c010fba4>] __wake_up_common+0x31/0x4f
Apr 27 03:42:46 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:42:46 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:42:46 st kernel: [<c0120ab4>] kthread+0xa0/0xc8
Apr 27 03:42:46 st kernel: [<c0120a14>] kthread+0x0/0xc8
Apr 27 03:42:46 st kernel: [<c010362b>] kernel_thread_helper+0x7/0x10
Apr 27 03:42:46 st kernel: =======================
Apr 27 03:43:16 st kernel: ata1: Entering mv_eng_timeout
Apr 27 03:43:16 st kernel: mmio_base d0900000 ap cfb602bc qc cfb60cdc scsi_cmnd ce09ae40 &cmnd ce09ae78
Apr 27 03:43:16 st kernel: ata1: no sense translation for status: 0x40
Apr 27 03:43:16 st kernel: ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
Apr 27 03:43:16 st kernel: ata1: status=0x40 { DriveReady }
Apr 27 03:43:16 st kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Apr 27 03:43:16 st kernel: sda: Current [descriptor]: sense key=0xb
Apr 27 03:43:16 st kernel: ASC=0x0 ASCQ=0x0
Apr 27 03:43:16 st kernel: Descriptor sense data with sense descriptors (in hex):
Apr 27 03:43:16 st kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 27 03:43:16 st kernel: 00 80 80 80
Apr 27 03:43:16 st kernel: end_request: I/O error, dev sda, sector 252076743
Apr 27 03:43:16 st kernel: BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
Apr 27 03:43:16 st kernel: [<c021be6b>] mv_qc_issue+0x97/0x10b
Apr 27 03:43:16 st kernel: [<c0212923>] ata_qc_issue+0x425/0x47b
Apr 27 03:43:16 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:43:16 st kernel: [<c0217204>] ata_scsi_translate+0xb5/0xfb
Apr 27 03:43:16 st kernel: [<c020f59a>] sd_rw_intr+0x15d/0x186
Apr 27 03:43:16 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:43:16 st kernel: [<c0218430>] ata_scsi_queuecmd+0x107/0x10e
Apr 27 03:43:16 st kernel: [<c0216571>] ata_scsi_rw_xlat+0x0/0x1b6
Apr 27 03:43:16 st kernel: [<c02073d9>] scsi_dispatch_cmd+0x17a/0x1b5
Apr 27 03:43:16 st kernel: [<c020b1ae>] scsi_request_fn+0x1f2/0x273
Apr 27 03:43:16 st kernel: [<c01957ed>] blk_remove_plug+0x4e/0x5a
Apr 27 03:43:16 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:43:16 st kernel: [<c01966ca>] blk_run_queue+0x2a/0x4b
Apr 27 03:43:16 st kernel: [<c020a882>] scsi_run_host_queues+0x10/0x22
Apr 27 03:43:16 st kernel: [<c0209a25>] scsi_error_handler+0x55a/0x590
Apr 27 03:43:16 st kernel: [<c010fba4>] __wake_up_common+0x31/0x4f
Apr 27 03:43:16 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:43:16 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:43:16 st kernel: [<c0120ab4>] kthread+0xa0/0xc8
Apr 27 03:43:16 st kernel: [<c0120a14>] kthread+0x0/0xc8
Apr 27 03:43:16 st kernel: [<c010362b>] kernel_thread_helper+0x7/0x10
Apr 27 03:43:16 st kernel: =======================
Apr 27 03:43:47 st kernel: ata1: Entering mv_eng_timeout
Apr 27 03:43:47 st kernel: mmio_base d0900000 ap cfb602bc qc cfb60cdc scsi_cmnd ce09ae40 &cmnd ce09ae78
Apr 27 03:43:47 st kernel: ata1: no sense translation for status: 0x40
Apr 27 03:43:47 st kernel: ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
Apr 27 03:43:47 st kernel: ata1: status=0x40 { DriveReady }
Apr 27 03:43:47 st kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Apr 27 03:43:47 st kernel: sda: Current [descriptor]: sense key=0xb
Apr 27 03:43:47 st kernel: ASC=0x0 ASCQ=0x0
Apr 27 03:43:47 st kernel: Descriptor sense data with sense descriptors (in hex):
Apr 27 03:43:47 st kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 27 03:43:47 st kernel: 00 80 80 80
Apr 27 03:43:47 st kernel: end_request: I/O error, dev sda, sector 256795127
Apr 27 03:43:47 st kernel: BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
Apr 27 03:43:47 st kernel: [<c021be6b>] mv_qc_issue+0x97/0x10b
Apr 27 03:43:47 st kernel: [<c0212923>] ata_qc_issue+0x425/0x47b
Apr 27 03:43:47 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:43:47 st kernel: [<c0217204>] ata_scsi_translate+0xb5/0xfb
Apr 27 03:43:47 st kernel: [<c020f59a>] sd_rw_intr+0x15d/0x186
Apr 27 03:43:47 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:43:47 st kernel: [<c0218430>] ata_scsi_queuecmd+0x107/0x10e
Apr 27 03:43:47 st kernel: [<c0216571>] ata_scsi_rw_xlat+0x0/0x1b6
Apr 27 03:43:47 st kernel: [<c02073d9>] scsi_dispatch_cmd+0x17a/0x1b5
Apr 27 03:43:47 st kernel: [<c020b1ae>] scsi_request_fn+0x1f2/0x273
Apr 27 03:43:47 st kernel: [<c01957ed>] blk_remove_plug+0x4e/0x5a
Apr 27 03:43:47 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:43:47 st kernel: [<c01966ca>] blk_run_queue+0x2a/0x4b
Apr 27 03:43:47 st kernel: [<c020a882>] scsi_run_host_queues+0x10/0x22
Apr 27 03:43:47 st kernel: [<c0209a25>] scsi_error_handler+0x55a/0x590
Apr 27 03:43:47 st kernel: [<c010fba4>] __wake_up_common+0x31/0x4f
Apr 27 03:43:47 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:43:47 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:43:47 st kernel: [<c0120ab4>] kthread+0xa0/0xc8
Apr 27 03:43:47 st kernel: [<c0120a14>] kthread+0x0/0xc8
Apr 27 03:43:47 st kernel: [<c010362b>] kernel_thread_helper+0x7/0x10
Apr 27 03:43:47 st kernel: =======================
Apr 27 03:44:18 st kernel: ata1: Entering mv_eng_timeout
Apr 27 03:44:18 st kernel: mmio_base d0900000 ap cfb602bc qc cfb60cdc scsi_cmnd cfa50080 &cmnd cfa500b8
Apr 27 03:44:18 st kernel: ata1: no sense translation for status: 0x40
Apr 27 03:44:18 st kernel: ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
Apr 27 03:44:18 st kernel: ata1: status=0x40 { DriveReady }
Apr 27 03:44:18 st kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Apr 27 03:44:18 st kernel: sda: Current [descriptor]: sense key=0xb
Apr 27 03:44:18 st kernel: ASC=0x0 ASCQ=0x0
Apr 27 03:44:18 st kernel: Descriptor sense data with sense descriptors (in hex):
Apr 27 03:44:18 st kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 27 03:44:18 st kernel: 00 80 80 80
Apr 27 03:44:18 st kernel: end_request: I/O error, dev sda, sector 256811511
Apr 27 03:44:18 st kernel: BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
Apr 27 03:44:18 st kernel: [<c021be6b>] mv_qc_issue+0x97/0x10b
Apr 27 03:44:18 st kernel: [<c0212923>] ata_qc_issue+0x425/0x47b
Apr 27 03:44:18 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:44:18 st kernel: [<c0217204>] ata_scsi_translate+0xb5/0xfb
Apr 27 03:44:18 st kernel: [<c020f59a>] sd_rw_intr+0x15d/0x186
Apr 27 03:44:18 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:44:18 st kernel: [<c0218430>] ata_scsi_queuecmd+0x107/0x10e
Apr 27 03:44:18 st kernel: [<c0216571>] ata_scsi_rw_xlat+0x0/0x1b6
Apr 27 03:44:18 st kernel: [<c02073d9>] scsi_dispatch_cmd+0x17a/0x1b5
Apr 27 03:44:18 st kernel: [<c020b1ae>] scsi_request_fn+0x1f2/0x273
Apr 27 03:44:18 st kernel: [<c01957ed>] blk_remove_plug+0x4e/0x5a
Apr 27 03:44:18 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:44:18 st kernel: [<c01966ca>] blk_run_queue+0x2a/0x4b
Apr 27 03:44:18 st kernel: [<c020a882>] scsi_run_host_queues+0x10/0x22
Apr 27 03:44:18 st kernel: [<c0209a25>] scsi_error_handler+0x55a/0x590
Apr 27 03:44:18 st kernel: [<c010fba4>] __wake_up_common+0x31/0x4f
Apr 27 03:44:18 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:44:18 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:44:18 st kernel: [<c0120ab4>] kthread+0xa0/0xc8
Apr 27 03:44:18 st kernel: [<c0120a14>] kthread+0x0/0xc8
Apr 27 03:44:18 st kernel: [<c010362b>] kernel_thread_helper+0x7/0x10
Apr 27 03:44:18 st kernel: =======================
Apr 27 03:44:48 st kernel: ata1: Entering mv_eng_timeout
Apr 27 03:44:48 st kernel: mmio_base d0900000 ap cfb602bc qc cfb60cdc scsi_cmnd ce09ae40 &cmnd ce09ae78
Apr 27 03:44:48 st kernel: ata1: no sense translation for status: 0x40
Apr 27 03:44:48 st kernel: ata1: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
Apr 27 03:44:48 st kernel: ata1: status=0x40 { DriveReady }
Apr 27 03:44:48 st kernel: sd 0:0:0:0: SCSI error: return code = 0x08000002
Apr 27 03:44:48 st kernel: sda: Current [descriptor]: sense key=0xb
Apr 27 03:44:48 st kernel: ASC=0x0 ASCQ=0x0
Apr 27 03:44:48 st kernel: Descriptor sense data with sense descriptors (in hex):
Apr 27 03:44:48 st kernel: 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
Apr 27 03:44:48 st kernel: 00 80 80 80
Apr 27 03:44:48 st kernel: end_request: I/O error, dev sda, sector 5506991
Apr 27 03:44:48 st kernel: BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
Apr 27 03:44:48 st kernel: [<c021be6b>] mv_qc_issue+0x97/0x10b
Apr 27 03:44:48 st kernel: [<c0212923>] ata_qc_issue+0x425/0x47b
Apr 27 03:44:48 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:44:48 st kernel: [<c0217204>] ata_scsi_translate+0xb5/0xfb
Apr 27 03:44:48 st kernel: [<c0206fac>] scsi_done+0x0/0x16
Apr 27 03:44:48 st kernel: [<c0218430>] ata_scsi_queuecmd+0x107/0x10e
Apr 27 03:44:48 st kernel: [<c0216571>] ata_scsi_rw_xlat+0x0/0x1b6
Apr 27 03:44:48 st kernel: [<c02073d9>] scsi_dispatch_cmd+0x17a/0x1b5
Apr 27 03:44:48 st kernel: [<c020b1ae>] scsi_request_fn+0x1f2/0x273
Apr 27 03:44:48 st kernel: [<c01957ed>] blk_remove_plug+0x4e/0x5a
Apr 27 03:44:48 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:44:48 st kernel: [<c01966ca>] blk_run_queue+0x2a/0x4b
Apr 27 03:44:48 st kernel: [<c020a882>] scsi_run_host_queues+0x10/0x22
Apr 27 03:44:48 st kernel: [<c0209a25>] scsi_error_handler+0x55a/0x590
Apr 27 03:44:48 st kernel: [<c010fba4>] __wake_up_common+0x31/0x4f
Apr 27 03:44:48 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:44:48 st kernel: [<c02094cb>] scsi_error_handler+0x0/0x590
Apr 27 03:44:48 st kernel: [<c0120ab4>] kthread+0xa0/0xc8
Apr 27 03:44:48 st kernel: [<c0120a14>] kthread+0x0/0xc8
Apr 27 03:44:48 st kernel: [<c010362b>] kernel_thread_helper+0x7/0x10
Apr 27 03:44:48 st kernel: =======================
Apr 27 03:44:48 st kernel: sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
Apr 27 03:44:49 st last message repeated 25 times
Apr 27 03:44:49 st kernel: RAID1 conf printout:
Apr 27 03:44:49 st kernel: --- wd:1 rd:2
Apr 27 03:44:49 st kernel: disk 0, wo:1, o:0, dev:sda1
Apr 27 03:44:49 st kernel: disk 1, wo:0, o:1, dev:sdb1
Apr 27 03:44:49 st kernel: sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
Apr 27 03:44:49 st last message repeated 3 times
Apr 27 03:44:49 st kernel: RAID1 conf printout:
Apr 27 03:44:49 st kernel: --- wd:1 rd:2
Apr 27 03:44:49 st kernel: disk 1, wo:0, o:1, dev:sdb1
Apr 27 03:44:49 st kernel: sess_param(173) 1 1 1 8192 8192 262144 65536 2 0 1 1 1 0 1 1
Apr 27 03:45:15 st last message repeated 102 times
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: sata_mv BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
2007-04-27 10:20 sata_mv BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue() Tomasz Chmielewski
@ 2007-05-23 9:03 ` Tomasz Chmielewski
2007-05-23 13:24 ` Mark Lord
0 siblings, 1 reply; 3+ messages in thread
From: Tomasz Chmielewski @ 2007-05-23 9:03 UTC (permalink / raw)
To: Linux IDE; +Cc: Jeff Garzik
Tomasz Chmielewski schrieb:
> Today at night, I had a serious sata_mv driver failure on one of the
> servers.
>
> I tested the drive in question with both smart and badblocks, but none
> shown any errors - so my quick conclusion is that something is not right
> with the sata_mv driver.
>
>
> The server has two drives; sda1 and sdb1 are connected into a RAID-1
> array. 38 seconds after the failure started to happen, sda1 was kicked
> out of RAID-1.
The error I mentioned before - BUG: at drivers/ata/sata_mv.c:1236
mv_qc_issue() - happened on /dev/sda drive.
As it appears, my /dev/sdb drive just dies (has multiple badblocks). It
causes similar errors when I tried to dd if=/dev/ero of=/dev/sdb.
It triggered two bugs:
BUG: at drivers/ata/sata_mv.c:657 mv_start_dma()
BUG: at drivers/ata/sata_mv.c:1201 mv_qc_issue()
Should it really print "BUG: at drivers/ata/sata_mv.c:657
mv_start_dma()" when it meets a badblock?
All that on 2.6.21 kernel:
ata2: translated ATA stat/err 0x51/40 to SCSI SK/ASC/ASCQ 0x3/11/04
ata2: status=0x51 { DriveReady SeekComplete Error }
ata2: error=0x40 { UncorrectableError }
sd 1:0:0:0: SCSI error: return code = 0x08000002
sdb: Current [descriptor]: sense key=0x3
ASC=0x11 ASCQ=0x4
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
0e 23 38 54
end_request: I/O error, dev sdb, sector 237189204
BUG: at drivers/ata/sata_mv.c:657 mv_start_dma()
[<c0221aa3>] mv_qc_issue+0xe6/0x10d
[<c0216784>] ata_qc_issue+0x41f/0x475
[<c020a9b6>] scsi_done+0x0/0x16
[<c021ab16>] ata_scsi_translate+0xf7/0x151
[<c020e2bb>] scsi_prep_fn+0x1b8/0x225
[<c020a9b6>] scsi_done+0x0/0x16
[<c021c96a>] ata_scsi_queuecmd+0x107/0x10e
[<c021a83e>] ata_scsi_rw_xlat+0x0/0x1bb
[<c020ade3>] scsi_dispatch_cmd+0x17a/0x1b5
[<c020ec50>] scsi_request_fn+0x1f2/0x273
[<c0198a89>] blk_remove_plug+0x4e/0x5a
[<c0198ab2>] __generic_unplug_device+0x1d/0x1f
[<c0199748>] __make_request+0x38b/0x498
[<c0197ea5>] generic_make_request+0x1a9/0x1b9
[<c0199d23>] submit_bio+0xa6/0xad
[<c0131ab8>] mempool_alloc+0x1c/0x94
[<c016072d>] bio_alloc_bioset+0x9b/0xf3
[<c015dcbc>] submit_bh+0xd5/0xf3
[<c015ef00>] __block_write_full_page+0x1e4/0x2cc
[<c016216e>] blkdev_get_block+0x0/0x42
[<c015f279>] block_write_full_page+0xbc/0xc4
[<c016216e>] blkdev_get_block+0x0/0x42
[<c0133aa5>] generic_writepages+0x171/0x2a4
[<c0161690>] blkdev_writepage+0x0/0xc
[<c0133934>] generic_writepages+0x0/0x2a4
[<c0133bf8>] do_writepages+0x20/0x30
[<c0130189>] __filemap_fdatawrite_range+0x65/0x70
[<c01303b7>] filemap_fdatawrite+0x23/0x27
[<c01303cc>] filemap_write_and_wait+0x11/0x29
[<c0161a57>] __blkdev_put+0x38/0xf4
[<c0146dd2>] __fput+0x96/0x13c
[<c0144bcb>] filp_close+0x51/0x58
[<c0145af1>] sys_close+0x55/0x84
[<c0103b30>] syscall_call+0x7/0xb
=======================
ata2: Entering mv_eng_timeout
mmio_base d0900000 ap cfb202cc qc cfb20cfc scsi_cmnd cfa641c0 &cmnd cfa641f8
ata2: no sense translation for status: 0x40
ata2: translated ATA stat/err 0x40/00 to SCSI SK/ASC/ASCQ 0xb/00/00
ata2: status=0x40 { DriveReady }
sd 1:0:0:0: SCSI error: return code = 0x08000002
sdb: Current [descriptor]: sense key=0xb
ASC=0x0 ASCQ=0x0
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
0e 23 38 54
end_request: I/O error, dev sdb, sector 237142040
Buffer I/O error on device sdb, logical block 29642755
lost page write due to I/O error on sdb
Buffer I/O error on device sdb, logical block 29642756
lost page write due to I/O error on sdb
Buffer I/O error on device sdb, logical block 29642757
lost page write due to I/O error on sdb
Buffer I/O error on device sdb, logical block 29642758
lost page write due to I/O error on sdb
Buffer I/O error on device sdb, logical block 29642759
lost page write due to I/O error on sdb
Buffer I/O error on device sdb, logical block 29642760
lost page write due to I/O error on sdb
Buffer I/O error on device sdb, logical block 29642761
lost page write due to I/O error on sdb
Buffer I/O error on device sdb, logical block 29642762
lost page write due to I/O error on sdb
Buffer I/O error on device sdb, logical block 29642763
lost page write due to I/O error on sdb
Buffer I/O error on device sdb, logical block 29642764
lost page write due to I/O error on sdb
BUG: at drivers/ata/sata_mv.c:1201 mv_qc_issue()
[<c0221a56>] mv_qc_issue+0x99/0x10d
[<c0216784>] ata_qc_issue+0x41f/0x475
[<c020a9b6>] scsi_done+0x0/0x16
[<c021ab16>] ata_scsi_translate+0xf7/0x151
[<c02138c4>] sd_rw_intr+0x15d/0x186
[<c020a9b6>] scsi_done+0x0/0x16
[<c021c96a>] ata_scsi_queuecmd+0x107/0x10e
[<c021a83e>] ata_scsi_rw_xlat+0x0/0x1bb
[<c020ade3>] scsi_dispatch_cmd+0x17a/0x1b5
[<c020ec50>] scsi_request_fn+0x1f2/0x273
[<c0198a89>] blk_remove_plug+0x4e/0x5a
[<c0199966>] blk_run_queue+0x2a/0x4b
[<c020e338>] scsi_run_host_queues+0x10/0x22
[<c020d4a2>] scsi_error_handler+0x231/0x267
[<c0110b0d>] __wake_up_common+0x31/0x4f
[<c020d271>] scsi_error_handler+0x0/0x267
[<c020d271>] scsi_error_handler+0x0/0x267
[<c0121574>] kthread+0xa0/0xc8
[<c01214d4>] kthread+0x0/0xc8
[<c010464b>] kernel_thread_helper+0x7/0x10
=======================
ata2: translated ATA stat/err 0x7f/00 to SCSI SK/ASC/ASCQ 0x4/00/00
ata2: status=0x7f { DriveReady DeviceFault SeekComplete DataRequest
CorrectedError Index Error }
ata2: no device found (phy stat 00000000)
sd 1:0:0:0: SCSI error: return code = 0x08000002
sdb: Current [descriptor]: sense key=0x4
ASC=0x0 ASCQ=0x0
Descriptor sense data with sense descriptors (in hex):
72 04 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
0e 22 88 67
end_request: I/O error, dev sdb, sector 237144167
sd 1:0:0:0: SCSI error: return eturn code = 0x00040000
e
end_request: I/O error, dev sdb, sector 237146976
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237147680
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237148384
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237149088
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237149792
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237150496
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237151200
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237151904
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237152608
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237153312
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237154016
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237154720
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237155424
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237156128
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237156832
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237157536
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237158240
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237158944
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237159648
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237160352
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237161056
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237161760
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237162464
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237163168
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237163872
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237164576
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237165280
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237165984
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237166688
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237167392
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237168096
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237168800
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237169504
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237170208
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237170912
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237171616
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237172320
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237173024
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237173728
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237174432
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237175136
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237175840
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237176544
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237177248
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237177952
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237178656
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237179360
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237180064
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237180768
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237181472
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237182176
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237182880
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237183584
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237184288
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237184992
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237185696
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237186400
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237187104
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237187808
sd 1:0:0:0: SCSI error: return code = 0x00040000
end_request: I/O error, dev sdb, sector 237188512
--
Tomasz Chmielewski
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: sata_mv BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue()
2007-05-23 9:03 ` Tomasz Chmielewski
@ 2007-05-23 13:24 ` Mark Lord
0 siblings, 0 replies; 3+ messages in thread
From: Mark Lord @ 2007-05-23 13:24 UTC (permalink / raw)
To: Tomasz Chmielewski; +Cc: Linux IDE, Jeff Garzik
Tomasz Chmielewski wrote:
..
> The error I mentioned before - BUG: at drivers/ata/sata_mv.c:1236
> mv_qc_issue() - happened on /dev/sda drive.
>
> As it appears, my /dev/sdb drive just dies (has multiple badblocks). It
> causes similar errors when I tried to dd if=/dev/ero of=/dev/sdb.
>
> It triggered two bugs:
>
> BUG: at drivers/ata/sata_mv.c:657 mv_start_dma()
Heh.. that one is just the driver being way too clever for itself.
This fix (below) should take care of it.
> BUG: at drivers/ata/sata_mv.c:1201 mv_qc_issue()
That one should be harmless, and is likely a side-effect of
not completely resetting the engine & variables after an error.
This whole driver needs a lot of TLC, something I just might
be into doing shortly. Meanwhile:
This patch removes some unhelpful paranoia from sata_mv.c,
now choosing to actually *recover* rather than simply complain.
Signed-off-by: Mark Lord <mlord@pobox.com>
---
--- linux/drivers/ata/sata_mv.c.orig 2007-04-26 12:02:46.000000000 -0400
+++ linux/drivers/ata/sata_mv.c 2007-05-23 09:18:42.000000000 -0400
@@ -650,11 +650,8 @@
*/
static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp)
{
- if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) {
- writelfl(EDMA_EN, base + EDMA_CMD_OFS);
- pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
- }
- WARN_ON(!(EDMA_EN & readl(base + EDMA_CMD_OFS)));
+ writelfl(EDMA_EN, base + EDMA_CMD_OFS);
+ pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
}
/**
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2007-05-23 13:24 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-04-27 10:20 sata_mv BUG: at drivers/ata/sata_mv.c:1236 mv_qc_issue() Tomasz Chmielewski
2007-05-23 9:03 ` Tomasz Chmielewski
2007-05-23 13:24 ` Mark Lord
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).