From: Mark Lord <liml@rtr.ca>
To: Jeff Garzik <jgarzik@pobox.com>,
IDE/ATA development list <linux-ide@vger.kernel.org>,
Andrew Morton <akpm@osdl.org>
Subject: [Fwd: Re: PATCH: libata: add support for ATA_16 on ATAPI]
Date: Wed, 02 May 2007 22:37:14 -0400 [thread overview]
Message-ID: <46394ADA.1020400@rtr.ca> (raw)
Jeff?
This has been pending for a very long time now.
This patch brings libata up to similar standards as Linux IDE
with support for things like hdparm -I (identify) and -C (check power)
among others on ATAPI drives.
Andrew, can you pick this up for -mm ??
???
-------- Original Message --------
Subject: Re: PATCH: libata: add support for ATA_16 on ATAPI
Date: Sun, 29 Apr 2007 16:46:15 +0900
From: Tejun Heo <htejun@gmail.com>
To: Mark Lord <liml@rtr.ca>
CC: Jeff Garzik <jgarzik@pobox.com>, Alan Cox <alan@redhat.com>, IDE/ATA development list <linux-ide@vger.kernel.org>
References: <4633C0E0.60706@rtr.ca> <4633C14B.6030403@rtr.ca>
Mark Lord wrote:
> resending.. again.. with a Subject line this time :)
>
> This patch adds support for issuing ATA_16 passthru commands
> to ATAPI devices managed by libata. It requires the previous
> CDB length fix patch.
>
> A boot/module parameter, "ata16_passthru=1" can be used to
> globally disable this feature, if ever desired.
>
> Signed-Off-By: Mark Lord <mlord@pobox.com>
Acked-by: Tejun Heo <htejun@gmail.com>
diff -u --recursive --new-file --exclude-from=old/Documentation/dontdiff old/drivers/ata/libata-core.c new/drivers/ata/libata-core.c
--- old/drivers/ata/libata-core.c 2007-02-02 12:29:10.000000000 -0500
+++ new/drivers/ata/libata-core.c 2007-02-02 12:29:03.000000000 -0500
@@ -82,6 +82,10 @@
module_param(atapi_dmadir, int, 0444);
MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)");
+int ata16_passthru = 0;
+module_param(ata16_passthru, int, 0444);
+MODULE_PARM_DESC(ata16_passthru, "Enable passthru of SCSI opcode 0x85 to ATAPI devices (0=off, 1=on)");
+
int libata_fua = 0;
module_param_named(fua, libata_fua, int, 0444);
MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");
diff -u --recursive --new-file --exclude-from=old/Documentation/dontdiff old/drivers/ata/libata-scsi.c new/drivers/ata/libata-scsi.c
--- old/drivers/ata/libata-scsi.c 2007-02-02 12:29:10.000000000 -0500
+++ new/drivers/ata/libata-scsi.c 2007-02-02 12:29:25.000000000 -0500
@@ -2688,6 +2688,10 @@
static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd)
{
+ if (dev->class == ATA_DEV_ATAPI)
+ if (cmd != ATA_16 || ata16_passthru)
+ return atapi_xlat;
+
switch (cmd) {
case READ_6:
case READ_10:
@@ -2746,27 +2750,28 @@
void (*done)(struct scsi_cmnd *),
struct ata_device *dev)
{
- int rc = 0;
-
- if (unlikely(!scmd->cmd_len || scmd->cmd_len > dev->cdb_len)) {
- DPRINTK("bad CDB len=%u, max=%u\n",
- scmd->cmd_len, dev->cdb_len);
+ ata_xlat_func_t xlat_func;
+ int rc = 0, max_len;
+ u8 scsi_op = scmd->cmnd[0];
+
+ if (scsi_op == ATA_16 && dev->class == ATA_DEV_ATAPI && !ata16_passthru)
+ max_len = 16;
+ else
+ max_len = dev->cdb_len;
+
+ if (unlikely(!scmd->cmd_len || scmd->cmd_len > max_len)) {
+ DPRINTK("bad CDB len=%u, max=%u\n",
+ scmd->cmd_len, max_len);
scmd->result = DID_ERROR << 16;
done(scmd);
return 0;
}
- if (dev->class == ATA_DEV_ATA) {
- ata_xlat_func_t xlat_func = ata_get_xlat_func(dev,
- scmd->cmnd[0]);
-
- if (xlat_func)
- rc = ata_scsi_translate(dev, scmd, done, xlat_func);
- else
- ata_scsi_simulate(dev, scmd, done);
- } else
- rc = ata_scsi_translate(dev, scmd, done, atapi_xlat);
-
+ xlat_func = ata_get_xlat_func(dev, scsi_op);
+ if (xlat_func)
+ rc = ata_scsi_translate(dev, scmd, done, xlat_func);
+ else
+ ata_scsi_simulate(dev, scmd, done);
return rc;
}
diff -u --recursive --new-file --exclude-from=old/Documentation/dontdiff old/drivers/ata/libata.h new/drivers/ata/libata.h
--- old/drivers/ata/libata.h 2007-02-02 12:26:28.000000000 -0500
+++ new/drivers/ata/libata.h 2007-02-02 12:29:03.000000000 -0500
@@ -47,6 +47,7 @@
extern struct workqueue_struct *ata_aux_wq;
extern int atapi_enabled;
extern int atapi_dmadir;
+extern int ata16_passthru;
extern int libata_fua;
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev);
extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
next reply other threads:[~2007-05-03 2:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-03 2:37 Mark Lord [this message]
2007-05-03 12:18 ` [Fwd: Re: PATCH: libata: add support for ATA_16 on ATAPI] Jeff Garzik
2007-05-03 13:34 ` Mark Lord
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46394ADA.1020400@rtr.ca \
--to=liml@rtr.ca \
--cc=akpm@osdl.org \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).