linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCHSET] libata: reimplement suspend/resume support and fix spindown on poweroff
@ 2007-05-04 19:26 Tejun Heo
  2007-05-04 19:27 ` [PATCH 1/2] libata: reimplement suspend/resume support using sdev->manage_start_stop Tejun Heo
                   ` (2 more replies)
  0 siblings, 3 replies; 10+ messages in thread
From: Tejun Heo @ 2007-05-04 19:26 UTC (permalink / raw)
  To: Jeff Garzik, Mark Lord, hancockr, cebbert, Alan Cox, emisca.ml,
	IDE/ATA development list, Stephen.Clark, fabio.comolli,
	a.p.zijlstra

Hello,

This is another take at using sdev->manage_start_stop to reimplement
suspend/resume and fix spindown on poweroff.  As Robert pointed out in
the other thread[1], sadly, ATA spec does NOT require cache flush on
standby and some distros don't flush cache prior to put the drive into
standby mode during shutdown.  This means that we can't skip cache flush
in the kernel shutdown path because data loss is possible.  Also, we
just can't switch to new method because there are drives which spin up
if told to spin down while it's already spun down.

So, that leaves us with migrating to new behavior (kernel side
sync/shutdown) while maintaining backward compatibility.  This patchset
tries to do that by supplying a scheduled-to-be-removed module parameter
libata.spindown_compat which defaults to 1.  When set, it makes libata
skip spindown during shutdown sequence thus maintaining the old behavior
of issuing only cache flush on shutdown.

So, distros should update their shutdown(8) to do the followings.

  * Check whether /sys/modules/libata/parameters/spindown_compat
    exists.  If it does, write 0 to it.

  * For each libata harddisk {
	* Check whether /sys/class/scsi_disk/h:c:i:l/manage_start_stop
	  exists.  Iff it doesn't, synchronize cache and spin the disk
	  down as before.
  }

If shutdown(8) does the above, nothing will change on older kernels
(some drives will spin up and have to do emergency unload but they
aren't too many) and everything should work properly on kernels with
spindown_compat or later ones which won't have it.  If shutdown(8) isn't
updated, the kernel will behave the same way as older kernels would.

To accelerate userland update, if shutdown(8) isn't updated
(spindown_compat not cleared), libata will complain loudly about it,
point the user to http://linux-ata.org/shutdown.html (which should be
written) and pause for 5 seconds during shutdown.  Hopefully, this makes
the users bug distros sufficiently so that userland tools can be updated
quickly.  Note that the pausing happens only during shutdown not during
reboot or suspend, so it shouldn't be too much of annoyance.

This change requires sdev->manage_start_stop updates from scsi-misc-2.6.
 The merged git tree can be found at...

  http://htj.dyndns.org/git/?p=libata-tj.git;a=shortlog;h=spindown
  git://htj.dyndns.org/libata-tj spindown

Thanks.

-- 
tejun

[1] http://thread.gmane.org/gmane.linux.ide/18167

^ permalink raw reply	[flat|nested] 10+ messages in thread
* [PATCH 1/2] libata: reimplement suspend/resume support using sdev->manage_start_stop
@ 2007-04-23 19:12 Tejun Heo
  0 siblings, 0 replies; 10+ messages in thread
From: Tejun Heo @ 2007-04-23 19:12 UTC (permalink / raw)
  To: Jeff Garzik, liml, hancockr, cebbert, Alan Cox, emisca.ml,
	linux-ide, Stephen.Clark, fabio.comolli, a.p.zijlstra

Reimplement suspend/resume support using sdev->manage_start_stop.

* Device suspend/resume is now SCSI layer's responsibility and the
  code is simplified a lot.

* DPM is dropped.  This also simplifies code a lot.  Suspend/resume
  status is port-wide now.

* ata_scsi_device_suspend/resume() and ata_dev_ready() removed.

* Resume now has to wait for disk to spin up before proceeding.  I
  couldn't find easy way out as libata is in EH waiting for the
  disk to be ready and sd is waiting for EH to complete to issue
  START_STOP.

* sdev->manage_start_stop is set to 1 in ata_scsi_slave_config().
  This fixes spindown on shutdown and suspend-to-disk.

Signed-off-by: Tejun Heo <htejun@gmail.com>
---

This and the following patch should fix all the spindown problems both
on shutdown and STD.  These patches are against v2.6.21-rc7 + updates
from scsi-misc-2.6.  The git tree is available at the following URL.

  http://htj.dyndns.org/git/?p=libata-tj.git;a=shortlog;h=spindown
  git://htj.dyndns.org/libata-tj spindown

I'll post combined patch against 2.6.21-rc7 as a reply to this thread.
Please test the combined patch and verify it works.

Thanks.

 drivers/ata/ahci.c              |    4 -
 drivers/ata/ata_generic.c       |    6 +-
 drivers/ata/ata_piix.c          |    4 -
 drivers/ata/libata-core.c       |   39 +------
 drivers/ata/libata-eh.c         |  237 +--------------------------------------
 drivers/ata/libata-scsi.c       |  129 +---------------------
 drivers/ata/pata_ali.c          |    4 -
 drivers/ata/pata_amd.c          |    4 -
 drivers/ata/pata_atiixp.c       |    4 -
 drivers/ata/pata_cmd640.c       |    2 -
 drivers/ata/pata_cmd64x.c       |    4 -
 drivers/ata/pata_cs5520.c       |    4 -
 drivers/ata/pata_cs5530.c       |    4 -
 drivers/ata/pata_cs5535.c       |    4 -
 drivers/ata/pata_cypress.c      |    4 -
 drivers/ata/pata_efar.c         |    4 -
 drivers/ata/pata_hpt366.c       |    4 -
 drivers/ata/pata_hpt3x3.c       |    4 -
 drivers/ata/pata_it8213.c       |    4 -
 drivers/ata/pata_it821x.c       |    4 -
 drivers/ata/pata_ixp4xx_cf.c    |    2 +-
 drivers/ata/pata_jmicron.c      |    4 -
 drivers/ata/pata_marvell.c      |    4 -
 drivers/ata/pata_mpc52xx.c      |    4 -
 drivers/ata/pata_mpiix.c        |    4 -
 drivers/ata/pata_netcell.c      |    4 -
 drivers/ata/pata_ns87410.c      |    4 -
 drivers/ata/pata_oldpiix.c      |    4 -
 drivers/ata/pata_opti.c         |    4 -
 drivers/ata/pata_optidma.c      |    4 -
 drivers/ata/pata_pdc202xx_old.c |    4 -
 drivers/ata/pata_radisys.c      |    4 -
 drivers/ata/pata_rz1000.c       |    6 +-
 drivers/ata/pata_sc1200.c       |    4 -
 drivers/ata/pata_scc.c          |    4 -
 drivers/ata/pata_serverworks.c  |    4 -
 drivers/ata/pata_sil680.c       |    4 -
 drivers/ata/pata_sis.c          |    4 -
 drivers/ata/pata_triflex.c      |    4 -
 drivers/ata/pata_via.c          |    4 -
 drivers/ata/sata_inic162x.c     |    4 -
 drivers/ata/sata_nv.c           |    8 --
 drivers/ata/sata_sil.c          |    4 -
 drivers/ata/sata_sil24.c        |    4 -
 include/linux/libata.h          |   14 +--
 45 files changed, 14 insertions(+), 573 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 7c61bc7..72c286e 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -246,10 +246,6 @@ static struct scsi_host_template ahci_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.suspend		= ata_scsi_device_suspend,
-	.resume			= ata_scsi_device_resume,
-#endif
 };
 
 static const struct ata_port_operations ahci_ops = {
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 92a491d..0f19e32 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -54,7 +54,7 @@ static int generic_set_mode(struct ata_port *ap, struct ata_device **unused)
 
 	for (i = 0; i < ATA_MAX_DEVICES; i++) {
 		struct ata_device *dev = &ap->device[i];
-		if (ata_dev_ready(dev)) {
+		if (ata_dev_enabled(dev)) {
 			/* We don't really care */
 			dev->pio_mode = XFER_PIO_0;
 			dev->dma_mode = XFER_MW_DMA_0;
@@ -90,10 +90,6 @@ static struct scsi_host_template generic_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations generic_port_ops = {
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 55d306a..8421742 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -275,10 +275,6 @@ static struct scsi_host_template piix_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static const struct ata_port_operations piix_pata_ops = {
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 6d0a946..1c00526 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2823,7 +2823,7 @@ int ata_do_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
 		dev = &ap->device[i];
 
 		/* don't update suspended devices' xfer mode */
-		if (!ata_dev_ready(dev))
+		if (!ata_dev_enabled(dev))
 			continue;
 
 		rc = ata_dev_set_mode(dev);
@@ -5758,37 +5758,11 @@ static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg,
  */
 int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
 {
-	int i, j, rc;
+	int rc;
 
 	rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1);
-	if (rc)
-		goto fail;
-
-	/* EH is quiescent now.  Fail if we have any ready device.
-	 * This happens if hotplug occurs between completion of device
-	 * suspension and here.
-	 */
-	for (i = 0; i < host->n_ports; i++) {
-		struct ata_port *ap = host->ports[i];
-
-		for (j = 0; j < ATA_MAX_DEVICES; j++) {
-			struct ata_device *dev = &ap->device[j];
-
-			if (ata_dev_ready(dev)) {
-				ata_port_printk(ap, KERN_WARNING,
-						"suspend failed, device %d "
-						"still active\n", dev->devno);
-				rc = -EBUSY;
-				goto fail;
-			}
-		}
-	}
-
-	host->dev->power.power_state = mesg;
-	return 0;
-
- fail:
-	ata_host_resume(host);
+	if (rc == 0)
+		host->dev->power.power_state = mesg;
 	return rc;
 }
 
@@ -6801,11 +6775,6 @@ EXPORT_SYMBOL_GPL(ata_pci_default_filter);
 EXPORT_SYMBOL_GPL(ata_pci_clear_simplex);
 #endif /* CONFIG_PCI */
 
-#ifdef CONFIG_PM
-EXPORT_SYMBOL_GPL(ata_scsi_device_suspend);
-EXPORT_SYMBOL_GPL(ata_scsi_device_resume);
-#endif /* CONFIG_PM */
-
 EXPORT_SYMBOL_GPL(ata_eng_timeout);
 EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
 EXPORT_SYMBOL_GPL(ata_port_abort);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 0dbee55..59d0fb5 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -55,29 +55,12 @@ static void ata_eh_finish(struct ata_port *ap);
 #ifdef CONFIG_PM
 static void ata_eh_handle_port_suspend(struct ata_port *ap);
 static void ata_eh_handle_port_resume(struct ata_port *ap);
-static int ata_eh_suspend(struct ata_port *ap,
-			  struct ata_device **r_failed_dev);
-static void ata_eh_prep_resume(struct ata_port *ap);
-static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev);
 #else /* CONFIG_PM */
 static void ata_eh_handle_port_suspend(struct ata_port *ap)
 { }
 
 static void ata_eh_handle_port_resume(struct ata_port *ap)
 { }
-
-static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev)
-{
-	return 0;
-}
-
-static void ata_eh_prep_resume(struct ata_port *ap)
-{ }
-
-static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev)
-{
-	return 0;
-}
 #endif /* CONFIG_PM */
 
 static void ata_ering_record(struct ata_ering *ering, int is_io,
@@ -1764,7 +1747,7 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
 		if (ehc->i.flags & ATA_EHI_DID_RESET)
 			readid_flags |= ATA_READID_POSTRESET;
 
-		if (action & ATA_EH_REVALIDATE && ata_dev_ready(dev)) {
+		if ((action & ATA_EH_REVALIDATE) && ata_dev_enabled(dev)) {
 			if (ata_port_offline(ap)) {
 				rc = -EIO;
 				goto err;
@@ -1841,166 +1824,6 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
 	return rc;
 }
 
-#ifdef CONFIG_PM
-/**
- *	ata_eh_suspend - handle suspend EH action
- *	@ap: target host port
- *	@r_failed_dev: result parameter to indicate failing device
- *
- *	Handle suspend EH action.  Disk devices are spinned down and
- *	other types of devices are just marked suspended.  Once
- *	suspended, no EH action to the device is allowed until it is
- *	resumed.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep).
- *
- *	RETURNS:
- *	0 on success, -errno otherwise
- */
-static int ata_eh_suspend(struct ata_port *ap, struct ata_device **r_failed_dev)
-{
-	struct ata_device *dev;
-	int i, rc = 0;
-
-	DPRINTK("ENTER\n");
-
-	for (i = 0; i < ATA_MAX_DEVICES; i++) {
-		unsigned long flags;
-		unsigned int action, err_mask;
-
-		dev = &ap->device[i];
-		action = ata_eh_dev_action(dev);
-
-		if (!ata_dev_enabled(dev) || !(action & ATA_EH_SUSPEND))
-			continue;
-
-		WARN_ON(dev->flags & ATA_DFLAG_SUSPENDED);
-
-		ata_eh_about_to_do(ap, dev, ATA_EH_SUSPEND);
-
-		if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) {
-			/* flush cache */
-			rc = ata_flush_cache(dev);
-			if (rc)
-				break;
-
-			/* spin down */
-			err_mask = ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1);
-			if (err_mask) {
-				ata_dev_printk(dev, KERN_ERR, "failed to "
-					       "spin down (err_mask=0x%x)\n",
-					       err_mask);
-				rc = -EIO;
-				break;
-			}
-		}
-
-		spin_lock_irqsave(ap->lock, flags);
-		dev->flags |= ATA_DFLAG_SUSPENDED;
-		spin_unlock_irqrestore(ap->lock, flags);
-
-		ata_eh_done(ap, dev, ATA_EH_SUSPEND);
-	}
-
-	if (rc)
-		*r_failed_dev = dev;
-
-	DPRINTK("EXIT\n");
-	return rc;
-}
-
-/**
- *	ata_eh_prep_resume - prep for resume EH action
- *	@ap: target host port
- *
- *	Clear SUSPENDED in preparation for scheduled resume actions.
- *	This allows other parts of EH to access the devices being
- *	resumed.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep).
- */
-static void ata_eh_prep_resume(struct ata_port *ap)
-{
-	struct ata_device *dev;
-	unsigned long flags;
-	int i;
-
-	DPRINTK("ENTER\n");
-
-	for (i = 0; i < ATA_MAX_DEVICES; i++) {
-		unsigned int action;
-
-		dev = &ap->device[i];
-		action = ata_eh_dev_action(dev);
-
-		if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME))
-			continue;
-
-		spin_lock_irqsave(ap->lock, flags);
-		dev->flags &= ~ATA_DFLAG_SUSPENDED;
-		spin_unlock_irqrestore(ap->lock, flags);
-	}
-
-	DPRINTK("EXIT\n");
-}
-
-/**
- *	ata_eh_resume - handle resume EH action
- *	@ap: target host port
- *	@r_failed_dev: result parameter to indicate failing device
- *
- *	Handle resume EH action.  Target devices are already reset and
- *	revalidated.  Spinning up is the only operation left.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep).
- *
- *	RETURNS:
- *	0 on success, -errno otherwise
- */
-static int ata_eh_resume(struct ata_port *ap, struct ata_device **r_failed_dev)
-{
-	struct ata_device *dev;
-	int i, rc = 0;
-
-	DPRINTK("ENTER\n");
-
-	for (i = 0; i < ATA_MAX_DEVICES; i++) {
-		unsigned int action, err_mask;
-
-		dev = &ap->device[i];
-		action = ata_eh_dev_action(dev);
-
-		if (!ata_dev_enabled(dev) || !(action & ATA_EH_RESUME))
-			continue;
-
-		ata_eh_about_to_do(ap, dev, ATA_EH_RESUME);
-
-		if (dev->class == ATA_DEV_ATA && !(action & ATA_EH_PM_FREEZE)) {
-			err_mask = ata_do_simple_cmd(dev,
-						     ATA_CMD_IDLEIMMEDIATE);
-			if (err_mask) {
-				ata_dev_printk(dev, KERN_ERR, "failed to "
-					       "spin up (err_mask=0x%x)\n",
-					       err_mask);
-				rc = -EIO;
-				break;
-			}
-		}
-
-		ata_eh_done(ap, dev, ATA_EH_RESUME);
-	}
-
-	if (rc)
-		*r_failed_dev = dev;
-
-	DPRINTK("EXIT\n");
-	return 0;
-}
-#endif /* CONFIG_PM */
-
 static int ata_port_nr_enabled(struct ata_port *ap)
 {
 	int i, cnt = 0;
@@ -2026,17 +1849,6 @@ static int ata_eh_skip_recovery(struct ata_port *ap)
 	struct ata_eh_context *ehc = &ap->eh_context;
 	int i;
 
-	/* skip if all possible devices are suspended */
-	for (i = 0; i < ata_port_max_devices(ap); i++) {
-		struct ata_device *dev = &ap->device[i];
-
-		if (!(dev->flags & ATA_DFLAG_SUSPENDED))
-			break;
-	}
-
-	if (i == ata_port_max_devices(ap))
-		return 1;
-
 	/* thaw frozen port, resume link and recover failed devices */
 	if ((ap->pflags & ATA_PFLAG_FROZEN) ||
 	    (ehc->i.flags & ATA_EHI_RESUME_LINK) || ata_port_nr_enabled(ap))
@@ -2116,9 +1928,6 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 	if (ap->pflags & ATA_PFLAG_UNLOADING)
 		goto out;
 
-	/* prep for resume */
-	ata_eh_prep_resume(ap);
-
 	/* skip EH if possible. */
 	if (ata_eh_skip_recovery(ap))
 		ehc->i.action = 0;
@@ -2146,11 +1955,6 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 	if (rc)
 		goto dev_fail;
 
-	/* resume devices */
-	rc = ata_eh_resume(ap, &dev);
-	if (rc)
-		goto dev_fail;
-
 	/* configure transfer mode if necessary */
 	if (ehc->i.flags & ATA_EHI_SETMODE) {
 		rc = ata_set_mode(ap, &dev);
@@ -2159,11 +1963,6 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 		ehc->i.flags &= ~ATA_EHI_SETMODE;
 	}
 
-	/* suspend devices */
-	rc = ata_eh_suspend(ap, &dev);
-	if (rc)
-		goto dev_fail;
-
 	goto out;
 
  dev_fail:
@@ -2359,22 +2158,13 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
  *
  *	Resume @ap.
  *
- *	This function also waits upto one second until all devices
- *	hanging off this port requests resume EH action.  This is to
- *	prevent invoking EH and thus reset multiple times on resume.
- *
- *	On DPM resume, where some of devices might not be resumed
- *	together, this may delay port resume upto one second, but such
- *	DPM resumes are rare and 1 sec delay isn't too bad.
- *
  *	LOCKING:
  *	Kernel thread context (may sleep).
  */
 static void ata_eh_handle_port_resume(struct ata_port *ap)
 {
-	unsigned long timeout;
 	unsigned long flags;
-	int i, rc = 0;
+	int rc = 0;
 
 	/* are we resuming? */
 	spin_lock_irqsave(ap->lock, flags);
@@ -2385,31 +2175,12 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
 	}
 	spin_unlock_irqrestore(ap->lock, flags);
 
-	/* spurious? */
-	if (!(ap->pflags & ATA_PFLAG_SUSPENDED))
-		goto done;
+	WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
 
 	if (ap->ops->port_resume)
 		rc = ap->ops->port_resume(ap);
 
-	/* give devices time to request EH */
-	timeout = jiffies + HZ; /* 1s max */
-	while (1) {
-		for (i = 0; i < ATA_MAX_DEVICES; i++) {
-			struct ata_device *dev = &ap->device[i];
-			unsigned int action = ata_eh_dev_action(dev);
-
-			if ((dev->flags & ATA_DFLAG_SUSPENDED) &&
-			    !(action & ATA_EH_RESUME))
-				break;
-		}
-
-		if (i == ATA_MAX_DEVICES || time_after(jiffies, timeout))
-			break;
-		msleep(10);
-	}
-
- done:
+	/* report result */
 	spin_lock_irqsave(ap->lock, flags);
 	ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED);
 	if (ap->pm_result) {
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 9afba2b..8f80019 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -510,133 +510,6 @@ static void ata_dump_status(unsigned id, struct ata_taskfile *tf)
 	}
 }
 
-#ifdef CONFIG_PM
-/**
- *	ata_scsi_device_suspend - suspend ATA device associated with sdev
- *	@sdev: the SCSI device to suspend
- *	@mesg: target power management message
- *
- *	Request suspend EH action on the ATA device associated with
- *	@sdev and wait for the operation to complete.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep).
- *
- *	RETURNS:
- *	0 on success, -errno otherwise.
- */
-int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t mesg)
-{
-	struct ata_port *ap = ata_shost_to_port(sdev->host);
-	struct ata_device *dev = ata_scsi_find_dev(ap, sdev);
-	unsigned long flags;
-	unsigned int action;
-	int rc = 0;
-
-	if (!dev)
-		goto out;
-
-	spin_lock_irqsave(ap->lock, flags);
-
-	/* wait for the previous resume to complete */
-	while (dev->flags & ATA_DFLAG_SUSPENDED) {
-		spin_unlock_irqrestore(ap->lock, flags);
-		ata_port_wait_eh(ap);
-		spin_lock_irqsave(ap->lock, flags);
-	}
-
-	/* if @sdev is already detached, nothing to do */
-	if (sdev->sdev_state == SDEV_OFFLINE ||
-	    sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL)
-		goto out_unlock;
-
-	/* request suspend */
-	action = ATA_EH_SUSPEND;
-	if (mesg.event != PM_EVENT_SUSPEND)
-		action |= ATA_EH_PM_FREEZE;
-	ap->eh_info.dev_action[dev->devno] |= action;
-	ap->eh_info.flags |= ATA_EHI_QUIET;
-	ata_port_schedule_eh(ap);
-
-	spin_unlock_irqrestore(ap->lock, flags);
-
-	/* wait for EH to do the job */
-	ata_port_wait_eh(ap);
-
-	spin_lock_irqsave(ap->lock, flags);
-
-	/* If @sdev is still attached but the associated ATA device
-	 * isn't suspended, the operation failed.
-	 */
-	if (sdev->sdev_state != SDEV_OFFLINE &&
-	    sdev->sdev_state != SDEV_CANCEL && sdev->sdev_state != SDEV_DEL &&
-	    !(dev->flags & ATA_DFLAG_SUSPENDED))
-		rc = -EIO;
-
- out_unlock:
-	spin_unlock_irqrestore(ap->lock, flags);
- out:
-	if (rc == 0)
-		sdev->sdev_gendev.power.power_state = mesg;
-	return rc;
-}
-
-/**
- *	ata_scsi_device_resume - resume ATA device associated with sdev
- *	@sdev: the SCSI device to resume
- *
- *	Request resume EH action on the ATA device associated with
- *	@sdev and return immediately.  This enables parallel
- *	wakeup/spinup of devices.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep).
- *
- *	RETURNS:
- *	0.
- */
-int ata_scsi_device_resume(struct scsi_device *sdev)
-{
-	struct ata_port *ap = ata_shost_to_port(sdev->host);
-	struct ata_device *dev = ata_scsi_find_dev(ap, sdev);
-	struct ata_eh_info *ehi = &ap->eh_info;
-	unsigned long flags;
-	unsigned int action;
-
-	if (!dev)
-		goto out;
-
-	spin_lock_irqsave(ap->lock, flags);
-
-	/* if @sdev is already detached, nothing to do */
-	if (sdev->sdev_state == SDEV_OFFLINE ||
-	    sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL)
-		goto out_unlock;
-
-	/* request resume */
-	action = ATA_EH_RESUME;
-	if (sdev->sdev_gendev.power.power_state.event == PM_EVENT_SUSPEND)
-		__ata_ehi_hotplugged(ehi);
-	else
-		action |= ATA_EH_PM_FREEZE | ATA_EH_SOFTRESET;
-	ehi->dev_action[dev->devno] |= action;
-
-	/* We don't want autopsy and verbose EH messages.  Disable
-	 * those if we're the only device on this link.
-	 */
-	if (ata_port_max_devices(ap) == 1)
-		ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
-
-	ata_port_schedule_eh(ap);
-
- out_unlock:
-	spin_unlock_irqrestore(ap->lock, flags);
- out:
-	sdev->sdev_gendev.power.power_state = PMSG_ON;
-	return 0;
-}
-#endif /* CONFIG_PM */
-
 /**
  *	ata_to_sense_error - convert ATA error to SCSI error
  *	@id: ATA device number
@@ -929,6 +802,8 @@ int ata_scsi_slave_config(struct scsi_device *sdev)
 
 	blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD);
 
+	sdev->manage_start_stop = 1;
+
 	if (dev)
 		ata_scsi_dev_config(sdev, dev);
 
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index d40edeb..48c7531 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -291,10 +291,6 @@ static struct scsi_host_template ali_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 /*
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 5a77e4e..2bf9ade 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -323,10 +323,6 @@ static struct scsi_host_template amd_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations amd33_port_ops = {
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 39c871a..b4048f0 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -229,10 +229,6 @@ static struct scsi_host_template atiixp_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations atiixp_port_ops = {
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index ab9468d..c876d77 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -181,8 +181,6 @@ static struct scsi_host_template cmd640_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations cmd640_port_ops = {
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 3989cc5..3e02c6a 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -266,10 +266,6 @@ static struct scsi_host_template cmd64x_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations cmd64x_port_ops = {
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 79bef0d..83bcc5b 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -155,10 +155,6 @@ static struct scsi_host_template cs5520_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations cs5520_port_ops = {
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 29642d5..637d8b3 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -176,10 +176,6 @@ static struct scsi_host_template cs5530_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations cs5530_port_ops = {
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 08cccc9..54586ac 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -172,10 +172,6 @@ static struct scsi_host_template cs5535_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations cs5535_port_ops = {
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index 6ec049c..30e5c54 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -125,10 +125,6 @@ static struct scsi_host_template cy82c693_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations cy82c693_port_ops = {
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index a321685..38411f2 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -246,10 +246,6 @@ static struct scsi_host_template efar_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static const struct ata_port_operations efar_ops = {
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 93cfa6d..c412a9a 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -331,10 +331,6 @@ static struct scsi_host_template hpt36x_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 /*
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index ac28ec8..84c636b 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -100,10 +100,6 @@ static struct scsi_host_template hpt3x3_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations hpt3x3_port_ops = {
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index 011306e..e1bd263 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -255,10 +255,6 @@ static struct scsi_host_template it8213_sht = {
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.slave_configure	= ata_scsi_slave_config,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static const struct ata_port_operations it8213_ops = {
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index f1f8cec..8e565a5 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -620,10 +620,6 @@ static struct scsi_host_template it821x_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations it821x_smart_port_ops = {
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 420c343..b994351 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -31,7 +31,7 @@ static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error)
 
 	for (i = 0; i < ATA_MAX_DEVICES; i++) {
 		struct ata_device *dev = &ap->device[i];
-		if (ata_dev_ready(dev)) {
+		if (ata_dev_enabled(dev)) {
 			ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
 			dev->pio_mode = XFER_PIO_0;
 			dev->xfer_mode = XFER_PIO_0;
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 43763c9..e3f6f5d 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -137,10 +137,6 @@ static struct scsi_host_template jmicron_sht = {
 	.slave_destroy		= ata_scsi_slave_destroy,
 	/* Use standard CHS mapping rules */
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.suspend		= ata_scsi_device_suspend,
-	.resume			= ata_scsi_device_resume,
-#endif
 };
 
 static const struct ata_port_operations jmicron_ops = {
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index d9b94a1..4c282ab 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -104,10 +104,6 @@ static struct scsi_host_template marvell_sht = {
 	.slave_destroy		= ata_scsi_slave_destroy,
 	/* Use standard CHS mapping rules */
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static const struct ata_port_operations marvell_ops = {
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 9587a89..368fac7 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -280,10 +280,6 @@ static struct scsi_host_template mpc52xx_ata_sht = {
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.slave_configure	= ata_scsi_slave_config,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.suspend		= ata_scsi_device_suspend,
-	.resume			= ata_scsi_device_resume,
-#endif
 };
 
 static struct ata_port_operations mpc52xx_ata_port_ops = {
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 987c5fa..2858927 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -164,10 +164,6 @@ static struct scsi_host_template mpiix_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations mpiix_port_ops = {
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index dbba5b7..f15eb34 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -37,10 +37,6 @@ static struct scsi_host_template netcell_sht = {
 	.slave_destroy		= ata_scsi_slave_destroy,
 	/* Use standard CHS mapping rules */
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static const struct ata_port_operations netcell_ops = {
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 078aeda..2147172 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -156,10 +156,6 @@ static struct scsi_host_template ns87410_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations ns87410_port_ops = {
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index dea4690..9cc1d1e 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -232,10 +232,6 @@ static struct scsi_host_template oldpiix_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static const struct ata_port_operations oldpiix_pata_ops = {
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index 13b63e2..af00c26 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -177,10 +177,6 @@ static struct scsi_host_template opti_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations opti_port_ops = {
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index b70e04c..d1569a7 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -362,10 +362,6 @@ static struct scsi_host_template optidma_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations optidma_port_ops = {
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index ee636be..3e204c3 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -244,10 +244,6 @@ static struct scsi_host_template pdc202xx_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations pdc2024x_port_ops = {
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 1c54673..bc01b17 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -200,10 +200,6 @@ static struct scsi_host_template radisys_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static const struct ata_port_operations radisys_pata_ops = {
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 85c4529..97785b4 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -40,7 +40,7 @@ static int rz1000_set_mode(struct ata_port *ap, struct ata_device **unused)
 
 	for (i = 0; i < ATA_MAX_DEVICES; i++) {
 		struct ata_device *dev = &ap->device[i];
-		if (ata_dev_ready(dev)) {
+		if (ata_dev_enabled(dev)) {
 			/* We don't really care */
 			dev->pio_mode = XFER_PIO_0;
 			dev->xfer_mode = XFER_PIO_0;
@@ -69,10 +69,6 @@ static struct scsi_host_template rz1000_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations rz1000_port_ops = {
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 66e8ff4..2af9f8c 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -194,10 +194,6 @@ static struct scsi_host_template sc1200_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations sc1200_port_ops = {
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 5df354d..243130e 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -984,10 +984,6 @@ static struct scsi_host_template scc_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static const struct ata_port_operations scc_pata_ops = {
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 3956ef2..fdd9a63 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -313,10 +313,6 @@ static struct scsi_host_template serverworks_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations serverworks_osb4_port_ops = {
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 6770820..8978186 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -230,10 +230,6 @@ static struct scsi_host_template sil680_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.suspend		= ata_scsi_device_suspend,
-	.resume			= ata_scsi_device_resume,
-#endif
 };
 
 static struct ata_port_operations sil680_port_ops = {
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index fc260d9..25f3b70 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -520,10 +520,6 @@ static struct scsi_host_template sis_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static const struct ata_port_operations sis_133_ops = {
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index e618ffd..33a1663 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -192,10 +192,6 @@ static struct scsi_host_template triflex_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations triflex_port_ops = {
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 96b7179..969b98f 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -300,10 +300,6 @@ static struct scsi_host_template via_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.resume			= ata_scsi_device_resume,
-	.suspend		= ata_scsi_device_suspend,
-#endif
 };
 
 static struct ata_port_operations via_port_ops = {
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index f099a1d..4c12d92 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -135,10 +135,6 @@ static struct scsi_host_template inic_sht = {
 	.slave_configure	= inic_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.suspend		= ata_scsi_device_suspend,
-	.resume			= ata_scsi_device_resume,
-#endif
 };
 
 static const int scr_map[] = {
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 0216974..087f84b 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -323,10 +323,6 @@ static struct scsi_host_template nv_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.suspend		= ata_scsi_device_suspend,
-	.resume			= ata_scsi_device_resume,
-#endif
 };
 
 static struct scsi_host_template nv_adma_sht = {
@@ -345,10 +341,6 @@ static struct scsi_host_template nv_adma_sht = {
 	.slave_configure	= nv_adma_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.suspend		= ata_scsi_device_suspend,
-	.resume			= ata_scsi_device_resume,
-#endif
 };
 
 static const struct ata_port_operations nv_generic_ops = {
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 0a1e417..e8483aa 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -182,10 +182,6 @@ static struct scsi_host_template sil_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.suspend		= ata_scsi_device_suspend,
-	.resume			= ata_scsi_device_resume,
-#endif
 };
 
 static const struct ata_port_operations sil_ops = {
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index e6223ba..b1945e6 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -380,10 +380,6 @@ static struct scsi_host_template sil24_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
-#ifdef CONFIG_PM
-	.suspend		= ata_scsi_device_suspend,
-	.resume			= ata_scsi_device_resume,
-#endif
 };
 
 static const struct ata_port_operations sil24_ops = {
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 73b86dd..6ef4055 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -140,7 +140,6 @@ enum {
 
 	ATA_DFLAG_PIO		= (1 << 8), /* device limited to PIO mode */
 	ATA_DFLAG_NCQ_OFF	= (1 << 9), /* device limited to non-NCQ mode */
-	ATA_DFLAG_SUSPENDED	= (1 << 10), /* device suspended */
 	ATA_DFLAG_INIT_MASK	= (1 << 16) - 1,
 
 	ATA_DFLAG_DETACH	= (1 << 16),
@@ -268,13 +267,9 @@ enum {
 	ATA_EH_REVALIDATE	= (1 << 0),
 	ATA_EH_SOFTRESET	= (1 << 1),
 	ATA_EH_HARDRESET	= (1 << 2),
-	ATA_EH_SUSPEND		= (1 << 3),
-	ATA_EH_RESUME		= (1 << 4),
-	ATA_EH_PM_FREEZE	= (1 << 5),
 
 	ATA_EH_RESET_MASK	= ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
-	ATA_EH_PERDEV_MASK	= ATA_EH_REVALIDATE | ATA_EH_SUSPEND |
-				  ATA_EH_RESUME | ATA_EH_PM_FREEZE,
+	ATA_EH_PERDEV_MASK	= ATA_EH_REVALIDATE,
 
 	/* ata_eh_info->flags */
 	ATA_EHI_HOTPLUGGED	= (1 << 0),  /* could have been hotplugged */
@@ -740,8 +735,6 @@ extern int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val);
 extern int ata_port_online(struct ata_port *ap);
 extern int ata_port_offline(struct ata_port *ap);
 #ifdef CONFIG_PM
-extern int ata_scsi_device_resume(struct scsi_device *);
-extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t mesg);
 extern int ata_host_suspend(struct ata_host *host, pm_message_t mesg);
 extern void ata_host_resume(struct ata_host *host);
 #endif
@@ -1016,11 +1009,6 @@ static inline unsigned int ata_dev_absent(const struct ata_device *dev)
 	return ata_class_absent(dev->class);
 }
 
-static inline unsigned int ata_dev_ready(const struct ata_device *dev)
-{
-	return ata_dev_enabled(dev) && !(dev->flags & ATA_DFLAG_SUSPENDED);
-}
-
 /*
  * port helpers
  */
-- 
1.5.0.3


^ permalink raw reply related	[flat|nested] 10+ messages in thread
end of thread, other threads:[~2007-05-11 20:39 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-05-04 19:26 [PATCHSET] libata: reimplement suspend/resume support and fix spindown on poweroff Tejun Heo
2007-05-04 19:27 ` [PATCH 1/2] libata: reimplement suspend/resume support using sdev->manage_start_stop Tejun Heo
2007-05-10  1:42   ` Jeff Garzik
2007-05-11 12:09     ` Tejun Heo
2007-05-11 20:39       ` Jeff Garzik
2007-05-04 19:28 ` [PATCH 2/2] libata: implement libata.spindown_compat Tejun Heo
2007-05-06 20:11 ` [PATCHSET] libata: reimplement suspend/resume support and fix spindown on poweroff Fabio Comolli
2007-05-06 20:24   ` Tejun Heo
2007-05-06 21:29   ` Fabio Comolli
  -- strict thread matches above, loose matches on Subject: below --
2007-04-23 19:12 [PATCH 1/2] libata: reimplement suspend/resume support using sdev->manage_start_stop Tejun Heo

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).