linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* sata_promise - another sata dvd writer problem
@ 2007-05-06 14:35 Sven Lemke
  0 siblings, 0 replies; 2+ messages in thread
From: Sven Lemke @ 2007-05-06 14:35 UTC (permalink / raw)
  To: linux-ide

Hi folks,

I'm using kernel 2.6.21-mm1 and get strange problems when connecting
my new SATA DVD writer to the TX2Plus Promise controller. It works
with an slightly older kernel version though. And since I couldn't figure
out who is responsible for the driver I decided to post my problem here.


dmesg reads:

sata_promise 0000:00:0b.0: version 2.05
...
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI, max UDMA/33
ata2.00: applying bridge limits
ata2.00: configured for UDMA/33
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5
...
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: (port_status 0x20200000)
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
         res 40/00:02:00:60:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: (port_status 0x20200000)
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
         res 40/00:02:00:60:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: (port_status 0x20200000)
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
         res 40/00:02:00:60:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/33
ata2: EH complete
ata2.00: limiting speed to UDMA/25:PIO4
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: (port_status 0x20200000)
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
         res 40/00:02:00:60:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/25
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: (port_status 0x20200000)
ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
         res 40/00:02:00:60:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
ata2: soft resetting port
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: configured for UDMA/25
ata2: EH complete
...
~

Then I have to disconnect the drive to continue booting.
I hope this can be fixed soon.

Thanks,
Sven

^ permalink raw reply	[flat|nested] 2+ messages in thread
* Re: sata_promise - another sata dvd writer problem
@ 2007-05-06 15:33 Mikael Pettersson
  0 siblings, 0 replies; 2+ messages in thread
From: Mikael Pettersson @ 2007-05-06 15:33 UTC (permalink / raw)
  To: catnip, linux-ide

On Sun, 06 May 2007 16:35:11 +0200, Sven Lemke wrote:
> I'm using kernel 2.6.21-mm1 and get strange problems when connecting
> my new SATA DVD writer to the TX2Plus Promise controller. It works
> with an slightly older kernel version though. And since I couldn't figure
> out who is responsible for the driver I decided to post my problem here.

How much older? Does 2.6.21 vanilla work?

> sata_promise 0000:00:0b.0: version 2.05
> ...
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata2.00: ATAPI, max UDMA/33
> ata2.00: applying bridge limits
> ata2.00: configured for UDMA/33
> sd 0:0:0:0: [sda] Attached SCSI disk
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S183L SB01 PQ: 0 ANSI: 5
> ...
> ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> ata2.00: (port_status 0x20200000)
> ata2.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0
>          res 40/00:02:00:60:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
etc

Probably fallout from a mistake I made in the error decoding update.
Apply the patch below, try again, and let us know if it works or not.

/Mikael

--- linux-2.6.21-mm1/drivers/ata/sata_promise.c.~1~	2007-05-05 22:24:41.000000000 +0200
+++ linux-2.6.21-mm1/drivers/ata/sata_promise.c	2007-05-05 22:25:21.000000000 +0200
@@ -653,6 +653,8 @@ static void pdc_error_intr(struct ata_po
 	qc->err_mask |= ac_err_mask;
 
 	pdc_reset_port(ap);
+
+	ata_port_abort(ap);
 }
 
 static inline unsigned int pdc_host_intr( struct ata_port *ap,

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2007-05-06 15:33 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-05-06 14:35 sata_promise - another sata dvd writer problem Sven Lemke
  -- strict thread matches above, loose matches on Subject: below --
2007-05-06 15:33 Mikael Pettersson

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).