* Re: [2.6.21.1] SATA freeze
[not found] <fa.zU1kuoSgByTYCYqY+iCQ5rMJy34@ifi.uio.no>
@ 2007-05-12 18:48 ` Robert Hancock
2007-05-12 19:09 ` Fred Moyer
2007-05-13 1:20 ` Robin H. Johnson
0 siblings, 2 replies; 6+ messages in thread
From: Robert Hancock @ 2007-05-12 18:48 UTC (permalink / raw)
To: Fred Moyer; +Cc: linux-kernel, linux-ide
Fred Moyer wrote:
> I just joined the list today so apologies if this email breaks any email
> client post threading.
>
> I have been seeing similar errors on two different systems. I applied
> Robert's sata_nv patch posted to the list on May 5th, and approved today
> by Jeff Garzik. I've taken several steps to insure that this isn't a
> faulty cable or drive issue. This is running on a hp dl145g2. Here is
> my lspci, dmesg, and relevant kernel config sections:
(snip)
> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
> 123392 in
> res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
> violation)
> ata1: soft resetting port
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: configured for UDMA/100
> ata1: EH complete
This appears to be a different problem. Something is issuing
SMART-related commands (smartd or smartctl perhaps) which the drive
seems to be reacting strangely to. It apparently completed the command
but never raised DRQ to request any data being transferred even though
we expected it to. Maybe SMART is disabled on the drive and that's
causing it to just toss these commands? CCing linux-ide in case anyone
knows what would cause this.
--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [2.6.21.1] SATA freeze
2007-05-12 18:48 ` [2.6.21.1] SATA freeze Robert Hancock
@ 2007-05-12 19:09 ` Fred Moyer
2007-05-13 1:02 ` Robert Hancock
2007-05-13 1:20 ` Robin H. Johnson
1 sibling, 1 reply; 6+ messages in thread
From: Fred Moyer @ 2007-05-12 19:09 UTC (permalink / raw)
To: Robert Hancock; +Cc: linux-kernel, linux-ide
Robert Hancock wrote:
> Fred Moyer wrote:
>> I just joined the list today so apologies if this email breaks any
>> email client post threading.
>>
>> I have been seeing similar errors on two different systems. I applied
>> Robert's sata_nv patch posted to the list on May 5th, and approved
>> today by Jeff Garzik. I've taken several steps to insure that this
>> isn't a faulty cable or drive issue. This is running on a hp
>> dl145g2. Here is my lspci, dmesg, and relevant kernel config sections:
>
> (snip)
>
>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>> ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data
>> 123392 in
>> res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
>> violation)
>> ata1: soft resetting port
>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> ata1.00: configured for UDMA/100
>> ata1: EH complete
>
> This appears to be a different problem. Something is issuing
> SMART-related commands (smartd or smartctl perhaps) which the drive
> seems to be reacting strangely to. It apparently completed the command
> but never raised DRQ to request any data being transferred even though
> we expected it to. Maybe SMART is disabled on the drive and that's
> causing it to just toss these commands? CCing linux-ide in case anyone
> knows what would cause this.
Here's smartctl -a for this drive - same output for both sda and sdb.
Smartd is currently running. Any advice appreciated.
Previously on 2.6.15 I was seeing sdb remount as readonly under heavy
i/o. I have not seen that issue yet with 2.6.21 (with Robert's patch
from May 5th for sata_nv), but that occurrence of remounts read-only was
infrequently, so that issue may be solved.
app2 ~ # smartctl -a /dev/sda
smartctl version 5.36 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Device: ATA ST3808110AS Version: n/a
Serial number: 5LR8895K
Device type: disk
Local Time is: Sat May 12 12:05:58 2007 PDT
Device does not support SMART
Error Counter logging not supported
[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
Device does not support Self Test logging
app2 ~ # ps aux | grep smart
root 5227 0.0 0.0 2892 672 ? S May11 0:00
/usr/sbin/smartd -p /var/run/smartd.pid
root 19510 0.0 0.0 2648 648 pts/0 S+ 12:07 0:00 grep
--colour=auto smart
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [2.6.21.1] SATA freeze
2007-05-12 19:09 ` Fred Moyer
@ 2007-05-13 1:02 ` Robert Hancock
2007-05-13 1:52 ` Fred Moyer
0 siblings, 1 reply; 6+ messages in thread
From: Robert Hancock @ 2007-05-13 1:02 UTC (permalink / raw)
To: Fred Moyer; +Cc: linux-kernel, linux-ide
Fred Moyer wrote:
>> This appears to be a different problem. Something is issuing
>> SMART-related commands (smartd or smartctl perhaps) which the drive
>> seems to be reacting strangely to. It apparently completed the command
>> but never raised DRQ to request any data being transferred even though
>> we expected it to. Maybe SMART is disabled on the drive and that's
>> causing it to just toss these commands? CCing linux-ide in case anyone
>> knows what would cause this.
>
> Here's smartctl -a for this drive - same output for both sda and sdb.
> Smartd is currently running. Any advice appreciated.
>
> Previously on 2.6.15 I was seeing sdb remount as readonly under heavy
> i/o. I have not seen that issue yet with 2.6.21 (with Robert's patch
> from May 5th for sata_nv), but that occurrence of remounts read-only was
> infrequently, so that issue may be solved.
>
> app2 ~ # smartctl -a /dev/sda
> smartctl version 5.36 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce
> Allen
> Home page is http://smartmontools.sourceforge.net/
>
> Device: ATA ST3808110AS Version: n/a
> Serial number: 5LR8895K
> Device type: disk
> Local Time is: Sat May 12 12:05:58 2007 PDT
> Device does not support SMART
>
> Error Counter logging not supported
>
> [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
> Device does not support Self Test logging
>
Sounds like SMART is likely disabled on that drive. You can try doing
"smartctl -s on /dev/sda" and see if that will turn it on.
--
Robert Hancock Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@nospamshaw.ca
Home Page: http://www.roberthancock.com/
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [2.6.21.1] SATA freeze
2007-05-12 18:48 ` [2.6.21.1] SATA freeze Robert Hancock
2007-05-12 19:09 ` Fred Moyer
@ 2007-05-13 1:20 ` Robin H. Johnson
2007-05-13 18:18 ` Jim Paris
1 sibling, 1 reply; 6+ messages in thread
From: Robin H. Johnson @ 2007-05-13 1:20 UTC (permalink / raw)
To: Robert Hancock, linux-ide; +Cc: Fred Moyer, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1970 bytes --]
On Sat, May 12, 2007 at 12:48:59PM -0600, Robert Hancock wrote:
> Fred Moyer wrote:
> > I just joined the list today so apologies if this email breaks any email
> > client post threading.
> > I have been seeing similar errors on two different systems. I applied
> > Robert's sata_nv patch posted to the list on May 5th, and approved today by
> > Jeff Garzik. I've taken several steps to insure that this isn't a faulty
> > cable or drive issue. This is running on a hp dl145g2. Here is my lspci,
> > dmesg, and relevant kernel config sections:
>
> (snip)
>
> > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> > ata1.00: cmd b0/d2:f1:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 123392
> > in
> > res 50/00:f1:00:4f:c2/00:00:00:00:00/00 Emask 0x202 (HSM
> > violation)
> > ata1: soft resetting port
> > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> > ata1.00: configured for UDMA/100
> > ata1: EH complete
>
> This appears to be a different problem. Something is issuing SMART-related
> commands (smartd or smartctl perhaps) which the drive seems to be reacting
> strangely to. It apparently completed the command but never raised DRQ to
> request any data being transferred even though we expected it to. Maybe
> SMART is disabled on the drive and that's causing it to just toss these
> commands? CCing linux-ide in case anyone knows what would cause this.
I previously posted a near identical error to linux-ide.
http://article.gmane.org/gmane.linux.ide/18375
Specifically, I could trigger it by running 'smartctl -d ata -S on
/dev/sda' OR (s-S/o/).
Same sata_nv controller, two different drives, many different cables.
Reproducible over 7 systems [two different models of Tyan mobo] that I
have.
--
Robin Hugh Johnson
Gentoo Linux Developer & Council Member
E-Mail : robbat2@gentoo.org
GnuPG FP : 11AC BA4F 4778 E3F6 E4ED F38E B27B 944E 3488 4E85
[-- Attachment #2: Type: application/pgp-signature, Size: 321 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [2.6.21.1] SATA freeze
2007-05-13 1:02 ` Robert Hancock
@ 2007-05-13 1:52 ` Fred Moyer
0 siblings, 0 replies; 6+ messages in thread
From: Fred Moyer @ 2007-05-13 1:52 UTC (permalink / raw)
To: Robert Hancock; +Cc: linux-kernel, linux-ide
Robert Hancock wrote:
> Fred Moyer wrote:
>>> This appears to be a different problem. Something is issuing
>>> SMART-related commands (smartd or smartctl perhaps) which the drive
>>> seems to be reacting strangely to. It apparently completed the
>>> command but never raised DRQ to request any data being transferred
>>> even though we expected it to. Maybe SMART is disabled on the drive
>>> and that's causing it to just toss these commands? CCing linux-ide in
>>> case anyone knows what would cause this.
>>
>> Here's smartctl -a for this drive - same output for both sda and sdb.
>> Smartd is currently running. Any advice appreciated.
>>
> Sounds like SMART is likely disabled on that drive. You can try doing
> "smartctl -s on /dev/sda" and see if that will turn it on.
>
Sorry - that last post of mine was brain dead. Here's the one with
(hopefully) useful data.
app2 ~ # smartctl -d ata -a /dev/sda
smartctl version 5.36 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST3808110AS
Serial Number: 5LR8895K
Firmware Version: 3.AJJ
User Capacity: 80,026,361,856 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sat May 12 18:49:06 2007 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection:
Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: ( 431) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 27) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail
Always - 0
3 Spin_Up_Time 0x0002 097 094 000 Old_age
Always - 0
4 Start_Stop_Count 0x0033 100 100 020 Pre-fail
Always - 41
5 Reallocated_Sector_Ct 0x0033 098 098 036 Pre-fail
Always - 80
7 Seek_Error_Rate 0x000f 073 060 030 Pre-fail
Always - 23194052
9 Power_On_Hours 0x0032 096 096 000 Old_age
Always - 3899
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail
Always - 108
187 Unknown_Attribute 0x0032 001 001 000 Old_age Always
- 17863
189 Unknown_Attribute 0x003a 100 100 000 Old_age Always
- 0
190 Unknown_Attribute 0x0022 070 057 045 Old_age Always
- 2689188364318
194 Temperature_Celsius 0x0022 030 043 000 Old_age Always
- 30 (Lifetime Min/Max 0/22)
195 Hardware_ECC_Recovered 0x001a 048 045 000 Old_age Always
- 2474070
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 7
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age
Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always
- 0
SMART Error Log Version: 1
ATA Error Count: 8 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 8 occurred at disk power-on lifetime: 3753 hours (156 days + 9 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 78 7a 06 e0 Error: ICRC, ABRT at LBA = 0x00067a78 = 424568
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 40 39 7a 06 e0 00 02:55:54.633 READ DMA EXT
b0 d0 01 00 4f c2 00 02 02:55:52.076 SMART READ DATA
b0 da 00 00 4f c2 00 00 02:55:51.992 SMART RETURN STATUS
35 00 08 10 52 04 e0 00 02:55:51.903 WRITE DMA EXT
35 00 a0 70 51 04 e0 00 02:55:51.892 WRITE DMA EXT
Error 7 occurred at disk power-on lifetime: 3751 hours (156 days + 7 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 bf ec 43 e0 Error: ICRC, ABRT at LBA = 0x0043ecbf = 4451519
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 b8 ec 43 e0 00 02:25:46.836 READ DMA EXT
b0 d0 01 00 4f c2 00 02 02:25:46.818 SMART READ DATA
b0 da 00 00 4f c2 00 00 02:25:44.880 SMART RETURN STATUS
35 00 08 f8 bc 04 e0 00 02:25:44.866 WRITE DMA EXT
35 00 20 d8 bc 04 e0 00 02:25:44.858 WRITE DMA EXT
Error 6 occurred at disk power-on lifetime: 3751 hours (156 days + 7 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 88 7a 17 e0 Error: ICRC, ABRT at LBA = 0x00177a88 = 1538696
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 81 7a 17 e0 00 01:55:42.014 READ DMA EXT
b0 d0 01 00 4f c2 00 02 01:55:41.990 SMART READ DATA
b0 da 00 00 4f c2 00 00 02:01:18.894 SMART RETURN STATUS
35 00 08 a0 21 04 e0 00 01:55:48.306 WRITE DMA EXT
35 00 98 08 21 04 e0 00 01:55:48.098 WRITE DMA EXT
Error 5 occurred at disk power-on lifetime: 3750 hours (156 days + 6 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 b5 c9 73 e0 Error: ICRC, ABRT at LBA = 0x0073c9b5 = 7588277
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 20 96 c9 73 e0 00 01:25:42.886 READ DMA EXT
b0 d0 01 00 4f c2 00 02 01:25:42.868 SMART READ DATA
35 00 08 ae b6 42 e0 00 01:25:42.456 WRITE DMA EXT
b0 da 00 00 4f c2 00 00 01:25:42.430 SMART RETURN STATUS
35 00 08 60 81 04 e0 00 01:25:42.376 WRITE DMA EXT
Error 4 occurred at disk power-on lifetime: 3749 hours (156 days + 5 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 4d 94 3e e0 Error: ICRC, ABRT at LBA = 0x003e944d = 4101197
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 46 94 3e e0 00 00:55:35.846 READ DMA EXT
b0 d0 01 00 4f c2 00 02 00:55:35.774 SMART READ DATA
b0 da 00 00 4f c2 00 00 00:55:35.732 SMART RETURN STATUS
35 00 08 20 b3 04 e0 00 00:55:35.649 WRITE DMA EXT
35 00 90 90 b2 04 e0 00 00:55:35.337 WRITE DMA EXT
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [2.6.21.1] SATA freeze
2007-05-13 1:20 ` Robin H. Johnson
@ 2007-05-13 18:18 ` Jim Paris
0 siblings, 0 replies; 6+ messages in thread
From: Jim Paris @ 2007-05-13 18:18 UTC (permalink / raw)
To: Robin H. Johnson; +Cc: Robert Hancock, linux-ide, Fred Moyer, linux-kernel
> > This appears to be a different problem. Something is issuing SMART-related
> > commands (smartd or smartctl perhaps) which the drive seems to be reacting
> > strangely to.
..
> Specifically, I could trigger it by running 'smartctl -d ata -S on
> /dev/sda' OR (s-S/o/).
This sounds like a known bug in smartmontools:
http://marc.info/?l=smartmontools-support&m=117203137719518
http://www.mail-archive.com/linux-ide@vger.kernel.org/msg03160.html
-jim
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2007-05-13 18:18 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <fa.zU1kuoSgByTYCYqY+iCQ5rMJy34@ifi.uio.no>
2007-05-12 18:48 ` [2.6.21.1] SATA freeze Robert Hancock
2007-05-12 19:09 ` Fred Moyer
2007-05-13 1:02 ` Robert Hancock
2007-05-13 1:52 ` Fred Moyer
2007-05-13 1:20 ` Robin H. Johnson
2007-05-13 18:18 ` Jim Paris
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).