linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Albert Lee <albertcc@tw.ibm.com>
To: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>, Alan Cox <alan@lxorguk.ukuu.org.uk>,
	Linux IDE <linux-ide@vger.kernel.org>,
	Doug Maxey <dwm@maxeymade.com>,
	Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
	Mark Lord <liml@rtr.ca>
Subject: [PATCH 2/8] libata: move ata_altstatus() out from ata_hsm_move() to the pio data xfer functions
Date: Wed, 16 May 2007 15:11:40 +0800	[thread overview]
Message-ID: <464AAEAC.20708@tw.ibm.com> (raw)
In-Reply-To: <464AACDF.1030903@tw.ibm.com>

patch 2/8:
 Move ata_altstatus() out from ata_hsm_move() to the pio data xfer functions,
like ata_pio_sectors() and atapi_pio_bytes() that know better if ata_altstatus() is needed.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
---
atapi_send_cdb() already did ata_altstatus() in itself.
This patch makes ata_pio_sector(), ata_pio_sectors() and atapi_pio_bytes() do the same.

diff -Nrup 01_flush_fix/drivers/ata/libata-core.c 02_smart_flush/drivers/ata/libata-core.c
--- 01_flush_fix/drivers/ata/libata-core.c	2007-05-15 10:05:33.000000000 +0800
+++ 02_smart_flush/drivers/ata/libata-core.c	2007-05-16 10:37:53.000000000 +0800
@@ -4435,6 +4435,7 @@ void ata_data_xfer_noirq(struct ata_devi
 /**
  *	ata_pio_sector - Transfer a sector of data.
  *	@qc: Command on going
+ *	@drq_last: Last sector of pio DRQ transfer
  *
  *	Transfer qc->sect_size bytes of data from/to the ATA device.
  *
@@ -4442,7 +4443,7 @@ void ata_data_xfer_noirq(struct ata_devi
  *	Inherited from caller.
  */
 
-static void ata_pio_sector(struct ata_queued_cmd *qc)
+static void ata_pio_sector(struct ata_queued_cmd *qc, int drq_last)
 {
 	int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
 	struct scatterlist *sg = qc->__sg;
@@ -4480,6 +4481,9 @@ static void ata_pio_sector(struct ata_qu
 		ap->ops->data_xfer(qc->dev, buf + offset, qc->sect_size, do_write);
 	}
 
+	if (drq_last)
+		ata_altstatus(ap); /* flush */
+
 	qc->curbytes += qc->sect_size;
 	qc->cursg_ofs += qc->sect_size;
 
@@ -4511,9 +4515,9 @@ static void ata_pio_sectors(struct ata_q
 		nsect = min((qc->nbytes - qc->curbytes) / qc->sect_size,
 			    qc->dev->multi_count);
 		while (nsect--)
-			ata_pio_sector(qc);
+			ata_pio_sector(qc, !nsect);
 	} else
-		ata_pio_sector(qc);
+		ata_pio_sector(qc, 1);
 }
 
 /**
@@ -4596,6 +4600,7 @@ next_sg:
 		for (i = 0; i < words; i++)
 			ap->ops->data_xfer(qc->dev, (unsigned char*)pad_buf, 2, do_write);
 
+		ata_altstatus(ap); /* flush */
 		ap->hsm_task_state = HSM_ST_LAST;
 		return;
 	}
@@ -4645,6 +4650,8 @@ next_sg:
 
 	if (bytes)
 		goto next_sg;
+
+	ata_altstatus(ap); /* flush */
 }
 
 /**
@@ -4861,7 +4868,6 @@ fsm_start:
 			 */
 			ap->hsm_task_state = HSM_ST;
 			ata_pio_sectors(qc);
-			ata_altstatus(ap); /* flush */
 		} else
 			/* send CDB */
 			atapi_send_cdb(ap, qc);
@@ -4942,7 +4948,6 @@ fsm_start:
 
 				if (!(qc->tf.flags & ATA_TFLAG_WRITE)) {
 					ata_pio_sectors(qc);
-					ata_altstatus(ap);
 					status = ata_wait_idle(ap);
 				}
 
@@ -4962,13 +4967,11 @@ fsm_start:
 			if (ap->hsm_task_state == HSM_ST_LAST &&
 			    (!(qc->tf.flags & ATA_TFLAG_WRITE))) {
 				/* all data read */
-				ata_altstatus(ap);
 				status = ata_wait_idle(ap);
 				goto fsm_start;
 			}
 		}
 
-		ata_altstatus(ap); /* flush */
 		poll_next = 1;
 		break;
 



  parent reply	other threads:[~2007-05-16  7:11 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-05-16  7:03 [PATCH/RFC 0/8] libata: delegate irq driven pio to workqueue (take 2) Albert Lee
2007-05-16  7:09 ` [PATCH 1/8] libata: fix the ata_altstatus() in ata_hsm_qc_complete() Albert Lee
2007-05-16  7:11 ` Albert Lee [this message]
2007-05-16  7:13 ` [PATCH 3/8] libata: change the state after "PIO data-in" to HSM_ST_IDLE instead of HSM_ST_LAST Albert Lee
2007-05-16  7:18 ` [PATCH 4/8] libata: move and reduce locking to the pio data xfer functions Albert Lee
2007-05-16  7:20 ` [PATCH 5/8] libata: ack unsolicited INTRQ when polling Albert Lee
2007-05-16  7:23 ` [PATCH 6/8] libata: delegate irq driven pio to workqueue Albert Lee
2007-05-16  7:24 ` [PATCH 7/8] libata: fix ata_port_flush_task() for irq pio delegation Albert Lee
2007-05-16  7:29 ` [PATCH 8/8] libata: ack more unsolicited INTRQ Albert Lee
2007-05-16 13:02   ` Alan Cox
2007-05-17  8:59     ` Albert Lee
2007-05-17  9:25       ` Tejun Heo
2007-05-17 15:42         ` Mark Lord
2007-05-17 15:50           ` Tejun Heo
2007-05-17 16:00           ` Alan Cox
2007-05-17  9:28       ` Alan Cox

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=464AAEAC.20708@tw.ibm.com \
    --to=albertcc@tw.ibm.com \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=albertl@mail.com \
    --cc=bzolnier@gmail.com \
    --cc=dwm@maxeymade.com \
    --cc=htejun@gmail.com \
    --cc=jeff@garzik.org \
    --cc=liml@rtr.ca \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).