From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tim Valenzuela Subject: sata_via, 2.6.22-rc1, VT6421A Date: Thu, 17 May 2007 03:09:32 -0700 Message-ID: <464C29DC.80901@deadlyninja.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------090608090205050902060103" Return-path: Received: from fed1rmmtao105.cox.net ([68.230.241.41]:62356 "EHLO fed1rmmtao105.cox.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754713AbXEQKll (ORCPT ); Thu, 17 May 2007 06:41:41 -0400 Received: from fed1rmimpo02.cox.net ([70.169.32.72]) by fed1rmmtao101.cox.net (InterMail vM.7.05.02.00 201-2174-114-20060621) with ESMTP id <20070517100934.GJQM14313.fed1rmmtao101.cox.net@fed1rmimpo02.cox.net> for ; Thu, 17 May 2007 06:09:34 -0400 Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: ", linux-ide@vger.kernel.org"@centauri.lan This is a multi-part message in MIME format. --------------090608090205050902060103 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Recently, I acquired a "SYBA SY-VIA-150 PCI SATA / IDE Combo Controller Card, Non Raid" The physical chip reads "VT6421A 0651CD TAIWAN 21A0028971". Each SATA channel has a drive plugged in, the PATA does not. When using 2.6.22-rc1 I get some IO errors: [ 32.177782] Bad IO access at port 8 (return inl(port)) [ 32.177866] BUG: at lib/iomap.c:44 bad_io_access() [ 32.177950] [] ioread32+0x21/0x30 [ 32.178078] [] sata_scr_read+0x2c/0x50 Neither drive shows up in /dev. When using earlier kernels (2.6.20, 2.6.21) the first SATA channel seems to work, however the second channel has some IO errors: "failed to IDENTIFY (I/O error, err_mask=0x1)" Attached is a complete dmesg log of the 2.6.22-rc1 kernel and a partial log from a 2.6.21.1 boot. - Tim Valenzuela --------------090608090205050902060103 Content-Type: text/plain; name="dmesg_complete-2.6.22-rc1.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg_complete-2.6.22-rc1.txt" [ 0.000000] Linux version 2.6.22-rc1 (root@centauri) (gcc version 4.1.1 (Gentoo 4.1.1-r3)) #2 PREEMPT Thu May 17 02:25:09 MST 2007 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) [ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 131056 [ 0.000000] HighMem 131056 -> 131056 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 131056 [ 0.000000] On node 0 totalpages: 131056 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 991 pages used for memmap [ 0.000000] Normal zone: 125969 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP 000F75E0, 0014 (r0 Nvidia) [ 0.000000] ACPI: RSDT 1FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 1FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 1FFF30C0, 4561 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 1FFF0000, 0040 [ 0.000000] ACPI: APIC 1FFF7640, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:8 APIC version 16 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) [ 0.000000] Built 1 zonelists. Total pages: 130033 [ 0.000000] Kernel command line: root=/dev/hda2 [ 0.000000] Found and enabled local APIC! [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1997.061 MHz processor. [ 28.065144] Console: colour VGA+ 80x25 [ 28.068445] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 28.068799] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 28.082176] Memory: 511996k/524224k available (3627k kernel code, 11672k reserved, 1072k data, 208k init, 0k highmem) [ 28.082313] virtual kernel memory layout: [ 28.082314] fixmap : 0xfffea000 - 0xfffff000 ( 84 kB) [ 28.082315] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 28.082317] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 28.082318] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB) [ 28.082319] .init : 0xc059a000 - 0xc05ce000 ( 208 kB) [ 28.082321] .data : 0xc048afc8 - 0xc059738c (1072 kB) [ 28.082322] .text : 0xc0100000 - 0xc048afc8 (3627 kB) [ 28.082986] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 28.163118] Calibrating delay using timer specific routine.. 3996.99 BogoMIPS (lpj=7993994) [ 28.163319] Mount-cache hash table entries: 512 [ 28.163517] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 [ 28.163525] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 28.163616] CPU: L2 Cache: 256K (64 bytes/line) [ 28.163698] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 [ 28.163704] Intel machine check architecture supported. [ 28.163788] Intel machine check reporting enabled on CPU#0. [ 28.163877] Compat vDSO mapped to ffffe000. [ 28.163966] CPU: AMD Athlon(tm) XP 2400+ stepping 01 [ 28.164130] Checking 'hlt' instruction... OK. [ 28.179280] ACPI: Core revision 20070126 [ 28.181411] ACPI: setting ELCR to 0200 (from 1a20) [ 28.287109] NET: Registered protocol family 16 [ 28.287300] ACPI: bus type pci registered [ 28.319530] PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3 [ 28.319619] PCI: Using configuration type 1 [ 28.319699] Setting up standard PCI resources [ 28.328961] ACPI: Interpreter enabled [ 28.329047] ACPI: (supports S0 S1 S4 S5) [ 28.329341] ACPI: Using PIC for interrupt routing [ 28.338242] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 28.338341] PCI: Probing PCI hardware (bus 00) [ 28.338422] PCI: nForce2 C1 Halt Disconnect fixup [ 28.339468] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 28.339678] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 28.339947] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 28.390051] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 28.390930] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 28.391707] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 28.392486] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 28.393262] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 28.394120] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 28.394905] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 28.395683] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 28.396461] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) [ 28.397394] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 28.398169] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 28.399035] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 28.399816] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 28.400597] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 28.401374] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 28.402234] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 28.403081] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. [ 28.403440] ACPI: PCI Interrupt Link [APC2] (IRQs *17) [ 28.403756] ACPI: PCI Interrupt Link [APC3] (IRQs *18) [ 28.404070] ACPI: PCI Interrupt Link [APC4] (IRQs *19) [ 28.404383] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. [ 28.404794] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 [ 28.405281] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0 [ 28.405767] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 [ 28.406253] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0 [ 28.406740] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0 [ 28.407229] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [ 28.407710] ACPI: PCI Interrupt Link [APCS] (IRQs *23) [ 28.408074] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 [ 28.408559] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0 [ 28.409045] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. [ 28.409574] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 28.410051] Linux Plug and Play Support v0.97 (c) Adam Belay [ 28.410148] pnp: PnP ACPI init [ 28.410234] ACPI: bus type pnp registered [ 28.415128] pnp: PnP ACPI: found 16 devices [ 28.415212] ACPI: ACPI bus type pnp unregistered [ 28.415405] SCSI subsystem initialized [ 28.415511] libata version 2.20 loaded. [ 28.415579] usbcore: registered new interface driver usbfs [ 28.415695] usbcore: registered new interface driver hub [ 28.415814] usbcore: registered new device driver usb [ 28.415936] PCI: Using ACPI for IRQ routing [ 28.416021] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 28.473768] pnp: 00:00: ioport range 0x4000-0x407f has been reserved [ 28.473858] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved [ 28.473946] pnp: 00:00: ioport range 0x4400-0x447f has been reserved [ 28.474034] pnp: 00:00: ioport range 0x4480-0x44ff has been reserved [ 28.474122] pnp: 00:00: ioport range 0x4200-0x427f has been reserved [ 28.474210] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved [ 28.474304] pnp: 00:01: ioport range 0x5000-0x503f has been reserved [ 28.474392] pnp: 00:01: ioport range 0x5500-0x553f has been reserved [ 28.474485] pnp: 00:02: iomem range 0xf0000-0xf3fff could not be reserved [ 28.474574] pnp: 00:02: iomem range 0xf4000-0xf7fff could not be reserved [ 28.474664] pnp: 00:02: iomem range 0xf8000-0xfbfff could not be reserved [ 28.474754] Time: tsc clocksource has been installed. [ 28.474840] pnp: 00:02: iomem range 0xfc000-0xfffff could not be reserved [ 28.475570] ACPI: PCI Interrupt Link [LFIR] enabled at IRQ 9 [ 28.475659] PCI: setting IRQ 9 as level-triggered [ 28.475662] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LFIR] -> GSI 9 (level, low) -> IRQ 9 [ 28.475867] PCI: Setting latency timer of device 0000:00:0d.0 to 64 [ 28.527715] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[e8086000-e80867ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 28.562868] PCI: Bridge: 0000:00:08.0 [ 28.562948] IO window: 9000-bfff [ 28.563028] MEM window: e4000000-e6ffffff [ 28.563110] PREFETCH window: 30000000-300fffff [ 28.563194] PCI: Bridge: 0000:00:1e.0 [ 28.563271] IO window: disabled. [ 28.563350] MEM window: disabled. [ 28.563429] PREFETCH window: disabled. [ 28.563518] PCI: Setting latency timer of device 0000:00:08.0 to 64 [ 28.563558] NET: Registered protocol family 2 [ 28.598533] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 28.598696] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 28.599008] TCP bind hash table entries: 16384 (order: 4, 65536 bytes) [ 28.599197] TCP: Hash tables configured (established 16384 bind 16384) [ 28.599286] TCP reno registered [ 28.610733] Machine check exception polling timer started. [ 28.610959] audit: initializing netlink socket (disabled) [ 28.611053] audit(1179368785.420:1): initialized [ 28.611322] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 28.611626] NTFS driver 2.1.28 [Flags: R/W]. [ 28.611728] fuse init (API version 7.8) [ 28.611907] io scheduler noop registered [ 28.611988] io scheduler anticipatory registered (default) [ 28.612073] io scheduler deadline registered [ 28.612166] io scheduler cfq registered [ 28.666422] Boot video device is 0000:01:0a.0 [ 28.666744] input: Power Button (FF) as /class/input/input0 [ 28.666831] ACPI: Power Button (FF) [PWRF] [ 28.666971] input: Power Button (CM) as /class/input/input1 [ 28.667057] ACPI: Power Button (CM) [PWRB] [ 28.694108] lp: driver loaded but no devices found [ 28.694262] Real Time Clock Driver v1.12ac [ 28.694342] Linux agpgart interface v0.102 (c) Dave Jones [ 28.694515] agpgart: Detected NVIDIA nForce2 chipset [ 28.699238] agpgart: AGP aperture is 64M @ 0xe0000000 [ 28.699353] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled [ 28.700388] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 28.702876] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 28.703561] parport_pc 00:0c: reported by Plug and Play ACPI [ 28.703672] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] [ 28.704050] lp0: using parport0 (interrupt-driven). [ 28.722014] FDC 0 is a post-1991 82077 [ 28.723503] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize [ 28.723622] loop: module loaded [ 28.723753] sk98lin: driver has been replaced by the skge driver and is scheduled for removal [ 28.724233] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 5 [ 28.724320] PCI: setting IRQ 5 as level-triggered [ 28.724324] ACPI: PCI Interrupt 0000:01:04.0[A] -> Link [LNK2] -> GSI 5 (level, low) -> IRQ 5 [ 28.811747] eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter [ 28.811836] PrefPort:A RlmtMode:Check Link State [ 28.812011] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. [ 28.812419] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 5 [ 28.812506] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LMAC] -> GSI 5 (level, low) -> IRQ 5 [ 28.812710] PCI: Setting latency timer of device 0000:00:04.0 to 64 [ 29.329671] eth1: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0 [ 29.329777] Linux video capture interface: v2.00 [ 29.329876] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 29.329966] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 29.330146] NFORCE2: IDE controller at PCI slot 0000:00:09.0 [ 29.330245] NFORCE2: chipset revision 162 [ 29.330324] NFORCE2: not 100% native mode: will probe irqs later [ 29.330413] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. [ 29.330529] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround. [ 29.330649] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller [ 29.330740] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA [ 29.330945] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA [ 29.331149] Probing IDE interface ide0... [ 29.617133] hda: WDC WD1000JB-00CRA1, ATA DISK drive [ 29.738492] ohci1394: fw-host0: SelfID received outside of bus reset sequence [ 29.960628] hdb: MAXTOR 6L080L4, ATA DISK drive [ 30.008597] ieee1394: Host added: ID:BUS[0-00:1023] GUID[6e56696469610000] [ 30.018414] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 30.018604] Probing IDE interface ide1... [ 30.751469] hdc: LITE-ON LTR-48125W, ATAPI CD/DVD-ROM drive [ 31.031059] hdd: MAXTOR 6L080J4, ATA DISK drive [ 31.090564] ide1 at 0x170-0x177,0x376 on irq 15 [ 31.091009] hda: max request size: 128KiB [ 31.103796] hda: 195371568 sectors (100030 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) [ 31.104078] hda: cache flushes not supported [ 31.104194] hda: hda1 hda2 hda3 [ 31.107330] hdb: max request size: 128KiB [ 31.108443] hdb: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(133) [ 31.108865] hdb: cache flushes supported [ 31.108959] hdb: hdb1 [ 31.112988] hdd: max request size: 128KiB [ 31.114090] hdd: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(133) [ 31.114516] hdd: cache flushes supported [ 31.114608] hdd: hdd1 [ 31.127946] hdc: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) [ 31.128317] Uniform CD-ROM driver Revision: 3.20 [ 31.167473] sata_sil 0000:01:0b.0: version 2.2 [ 31.167832] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11 [ 31.167920] PCI: setting IRQ 11 as level-triggered [ 31.167924] ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11 [ 31.168212] scsi0 : sata_sil [ 31.168356] scsi1 : sata_sil [ 31.168475] ata1: SATA max UDMA/100 cmd 0xe0818080 ctl 0xe081808a bmdma 0xe0818000 irq 0 [ 31.168597] ata2: SATA max UDMA/100 cmd 0xe08180c0 ctl 0xe08180ca bmdma 0xe0818008 irq 0 [ 31.634076] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 31.661140] ata1.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448 [ 31.661262] ata1.00: ATA-7: WDC WD3200AAKS-00SBA0, 12.01B01, max UDMA/133 [ 31.661351] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 31.667154] ata1.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448 [ 31.667274] ata1.00: configured for UDMA/100 [ 32.133343] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 32.155927] ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448 [ 32.156047] ata2.00: ATA-7: WDC WD3200AAKS-00SBA0, 12.01B01, max UDMA/133 [ 32.156136] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 32.162278] ata2.00: ata_hpa_resize 1: sectors = 625142448, hpa_sectors = 625142448 [ 32.162398] ata2.00: configured for UDMA/100 [ 32.162580] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5 [ 32.162805] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 32.162906] sd 0:0:0:0: [sda] Write Protect is off [ 32.162989] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 32.163003] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.163174] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 32.163271] sd 0:0:0:0: [sda] Write Protect is off [ 32.163354] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 32.163366] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.163491] sda: unknown partition table [ 32.172184] sd 0:0:0:0: [sda] Attached SCSI disk [ 32.172328] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 32.172474] scsi 1:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5 [ 32.172676] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) [ 32.172773] sd 1:0:0:0: [sdb] Write Protect is off [ 32.172856] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 32.172868] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.173016] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) [ 32.173112] sd 1:0:0:0: [sdb] Write Protect is off [ 32.173195] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 32.173206] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.173336] sdb: sdb1 sdb2 [ 32.176266] sd 1:0:0:0: [sdb] Attached SCSI disk [ 32.176405] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 32.176567] sata_via 0000:01:07.0: version 2.1 [ 32.176878] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 12 [ 32.176966] PCI: setting IRQ 12 as level-triggered [ 32.176970] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK4] -> GSI 12 (level, low) -> IRQ 12 [ 32.177246] sata_via 0000:01:07.0: routed to hard irq line 12 [ 32.177404] scsi2 : sata_via [ 32.177544] scsi3 : sata_via [ 32.177667] scsi4 : sata_via [ 32.177782] Bad IO access at port 8 (return inl(port)) [ 32.177866] BUG: at lib/iomap.c:44 bad_io_access() [ 32.177950] [] ioread32+0x21/0x30 [ 32.178078] [] sata_scr_read+0x2c/0x50 [ 32.178202] [] ata_interrupt+0x0/0x250 [ 32.178327] [] ata_host_register+0x171/0x2d0 [ 32.178457] [] ata_interrupt+0x0/0x250 [ 32.178580] [] request_irq+0xb5/0xd0 [ 32.178702] [] devm_irq_release+0x0/0x10 [ 32.178827] [] devm_request_irq+0x70/0x90 [ 32.178950] [] ata_interrupt+0x0/0x250 [ 32.179073] [] ata_host_activate+0x72/0x90 [ 32.179197] [] svia_init_one+0x396/0x540 [ 32.179323] [] sysfs_dirent_exist+0x46/0x80 [ 32.179448] [] sysfs_make_dirent+0x2f/0x50 [ 32.179572] [] kobject_get+0x12/0x20 [ 32.179698] [] pci_device_probe+0x56/0x80 [ 32.179822] [] driver_probe_device+0x91/0x1a0 [ 32.179949] [] klist_next+0x6f/0xd0 [ 32.180074] [] __driver_attach+0x7c/0x80 [ 32.180197] [] bus_for_each_dev+0x44/0x70 [ 32.180321] [] kobject_get+0x12/0x20 [ 32.180443] [] driver_attach+0x16/0x20 [ 32.180565] [] __driver_attach+0x0/0x80 [ 32.180687] [] bus_add_driver+0x8a/0x1a0 [ 32.180811] [] create_proc_entry+0x5f/0xd0 [ 32.180937] [] __pci_register_driver+0x49/0x90 [ 32.181063] [] kernel_init+0x90/0x260 [ 32.181186] [] schedule_tail+0x2f/0xa0 [ 32.181324] [] __switch_to+0x28/0x1a0 [ 32.181448] [] ret_from_fork+0x6/0x1c [ 32.181570] [] kernel_init+0x0/0x260 [ 32.181691] [] kernel_init+0x0/0x260 [ 32.181813] [] kernel_thread_helper+0x7/0x18 [ 32.181938] ======================= [ 32.182017] ata3: SATA max UDMA/133 cmd 0x00019400 ctl 0x0001940a bmdma 0x0001a400 irq 0 [ 32.182136] Bad IO access at port 48 (return inl(port)) [ 32.182220] BUG: at lib/iomap.c:44 bad_io_access() [ 32.182301] [] ioread32+0x21/0x30 [ 32.182423] [] sata_scr_read+0x2c/0x50 [ 32.182545] [] ata_host_register+0x171/0x2d0 [ 32.182670] [] devm_irq_release+0x0/0x10 [ 32.182792] [] devm_request_irq+0x70/0x90 [ 32.182915] [] ata_interrupt+0x0/0x250 [ 32.183038] [] ata_host_activate+0x72/0x90 [ 32.183161] [] svia_init_one+0x396/0x540 [ 32.183286] [] sysfs_dirent_exist+0x46/0x80 [ 32.183410] [] sysfs_make_dirent+0x2f/0x50 [ 32.183534] [] kobject_get+0x12/0x20 [ 32.183656] [] pci_device_probe+0x56/0x80 [ 32.183779] [] driver_probe_device+0x91/0x1a0 [ 32.183904] [] klist_next+0x6f/0xd0 [ 32.184026] [] __driver_attach+0x7c/0x80 [ 32.184149] [] bus_for_each_dev+0x44/0x70 [ 32.184273] [] kobject_get+0x12/0x20 [ 32.184395] [] driver_attach+0x16/0x20 [ 32.184518] [] __driver_attach+0x0/0x80 [ 32.184641] [] bus_add_driver+0x8a/0x1a0 [ 32.184764] [] create_proc_entry+0x5f/0xd0 [ 32.184888] [] __pci_register_driver+0x49/0x90 [ 32.187075] [] kernel_init+0x90/0x260 [ 32.187197] [] schedule_tail+0x2f/0xa0 [ 32.187319] [] __switch_to+0x28/0x1a0 [ 32.187442] [] ret_from_fork+0x6/0x1c [ 32.187564] [] kernel_init+0x0/0x260 [ 32.187686] [] kernel_init+0x0/0x260 [ 32.187807] [] kernel_thread_helper+0x7/0x18 [ 32.187931] ======================= [ 32.188010] ata4: SATA max UDMA/133 cmd 0x00019800 ctl 0x0001980a bmdma 0x0001a408 irq 0 [ 32.188130] ata5: PATA max UDMA/133 cmd 0x00019c00 ctl 0x00019c0a bmdma 0x0001a410 irq 0 [ 32.188268] Bad IO access at port 8 (return inl(port)) [ 32.188351] BUG: at lib/iomap.c:44 bad_io_access() [ 32.188434] [] ioread32+0x21/0x30 [ 32.188555] [] mntput_no_expire+0x16/0xa0 [ 32.188681] [] sata_scr_read+0x2c/0x50 [ 32.188803] [] ata_std_softreset+0x0/0x110 [ 32.188926] [] sata_set_spd_needed+0x1d/0x40 [ 32.189050] [] ata_do_eh+0x84e/0x1aa0 [ 32.189173] [] _atomic_dec_and_lock+0x2f/0x50 [ 32.189300] [] mntput_no_expire+0x16/0xa0 [ 32.189424] [] link_path_walk+0x65/0xc0 [ 32.189548] [] do_path_lookup+0x8e/0x250 [ 32.189671] [] get_empty_filp+0x5f/0x120 [ 32.189796] [] ata_std_softreset+0x0/0x110 [ 32.189920] [] ata_std_prereset+0x0/0xe0 [ 32.190043] [] vsnprintf+0x34e/0x5d0 [ 32.190168] [] __switch_to+0x28/0x1a0 [ 32.190290] [] ata_bmdma_irq_clear+0x15/0x30 [ 32.190415] [] ata_bmdma_drive_eh+0xac/0x140 [ 32.190541] [] scsi_error_handler+0x0/0x310 [ 32.190669] [] ata_std_postreset+0x0/0xb0 [ 32.190793] [] sata_std_hardreset+0x0/0xc0 [ 32.190916] [] ata_std_prereset+0x0/0xe0 [ 32.191039] [] ata_bmdma_error_handler+0x33/0x40 [ 32.191165] [] sata_std_hardreset+0x0/0xc0 [ 32.191289] [] ata_std_postreset+0x0/0xb0 [ 32.191412] [] ata_scsi_error+0x260/0x690 [ 32.191536] [] __sched_text_start+0x283/0x650 [ 32.191661] [] scsi_error_handler+0x0/0x310 [ 32.191785] [] scsi_error_handler+0xa0/0x310 [ 32.191911] [] scsi_error_handler+0x0/0x310 [ 32.192035] [] scsi_error_handler+0x0/0x310 [ 32.192160] [] kthread+0x42/0x70 [ 32.192281] [] kthread+0x0/0x70 [ 32.192402] [] kernel_thread_helper+0x7/0x18 [ 32.192526] ======================= [ 32.192604] Bad IO access at port 8 (return inl(port)) [ 32.192688] BUG: at lib/iomap.c:44 bad_io_access() [ 32.192770] [] ioread32+0x21/0x30 [ 32.192891] [] sata_scr_read+0x2c/0x50 [ 32.193013] [] sata_phy_resume+0x23/0x80 [ 32.193136] [] mntput_no_expire+0x16/0xa0 [ 32.193269] [] sata_scr_read+0x2c/0x50 [ 32.193392] [] ata_std_prereset+0xb1/0xe0 [ 32.193515] [] ata_std_softreset+0x0/0x110 [ 32.193640] [] ata_do_eh+0x898/0x1aa0 [ 32.193762] [] _atomic_dec_and_lock+0x2f/0x50 [ 32.193887] [] mntput_no_expire+0x16/0xa0 [ 32.194011] [] link_path_walk+0x65/0xc0 [ 32.194134] [] do_path_lookup+0x8e/0x250 [ 32.194257] [] get_empty_filp+0x5f/0x120 [ 32.194380] [] ata_std_softreset+0x0/0x110 [ 32.194505] [] ata_std_prereset+0x0/0xe0 [ 32.194628] [] vsnprintf+0x34e/0x5d0 [ 32.194750] [] __switch_to+0x28/0x1a0 [ 32.194872] [] ata_bmdma_irq_clear+0x15/0x30 [ 32.194996] [] ata_bmdma_drive_eh+0xac/0x140 [ 32.195121] [] scsi_error_handler+0x0/0x310 [ 32.195245] [] ata_std_postreset+0x0/0xb0 [ 32.195368] [] sata_std_hardreset+0x0/0xc0 [ 32.195491] [] ata_std_prereset+0x0/0xe0 [ 32.195614] [] ata_bmdma_error_handler+0x33/0x40 [ 32.195740] [] sata_std_hardreset+0x0/0xc0 [ 32.195864] [] ata_std_postreset+0x0/0xb0 [ 32.195987] [] ata_scsi_error+0x260/0x690 [ 32.196111] [] __sched_text_start+0x283/0x650 [ 32.196236] [] scsi_error_handler+0x0/0x310 [ 32.196361] [] scsi_error_handler+0xa0/0x310 [ 32.196487] [] scsi_error_handler+0x0/0x310 [ 32.196611] [] scsi_error_handler+0x0/0x310 [ 32.196735] [] kthread+0x42/0x70 [ 32.196856] [] kthread+0x0/0x70 [ 32.196976] [] kernel_thread_helper+0x7/0x18 [ 32.197102] ======================= [ 32.197180] Bad IO access at port 8 (outl(val,port)) [ 32.197263] BUG: at lib/iomap.c:44 bad_io_access() [ 32.197345] [] sata_scr_write+0x33/0x50 [ 32.197468] [] sata_phy_resume+0x54/0x80 [ 32.197592] [] mntput_no_expire+0x16/0xa0 [ 32.197716] [] ata_std_prereset+0xb1/0xe0 [ 32.197840] [] ata_std_softreset+0x0/0x110 [ 32.197963] [] ata_do_eh+0x898/0x1aa0 [ 32.198086] [] _atomic_dec_and_lock+0x2f/0x50 [ 32.198212] [] mntput_no_expire+0x16/0xa0 [ 32.198335] [] link_path_walk+0x65/0xc0 [ 32.198458] [] do_path_lookup+0x8e/0x250 [ 32.198583] [] get_empty_filp+0x5f/0x120 [ 32.198706] [] ata_std_softreset+0x0/0x110 [ 32.198831] [] ata_std_prereset+0x0/0xe0 [ 32.198954] [] vsnprintf+0x34e/0x5d0 [ 32.199076] [] __switch_to+0x28/0x1a0 [ 32.199198] [] ata_bmdma_irq_clear+0x15/0x30 [ 32.199323] [] ata_bmdma_drive_eh+0xac/0x140 [ 32.199448] [] scsi_error_handler+0x0/0x310 [ 32.199573] [] ata_std_postreset+0x0/0xb0 [ 32.199696] [] sata_std_hardreset+0x0/0xc0 [ 32.199819] [] ata_std_prereset+0x0/0xe0 [ 32.199942] [] ata_bmdma_error_handler+0x33/0x40 [ 32.200068] [] sata_std_hardreset+0x0/0xc0 [ 32.200192] [] ata_std_postreset+0x0/0xb0 [ 32.200315] [] ata_scsi_error+0x260/0x690 [ 32.200439] [] __sched_text_start+0x283/0x650 [ 32.200564] [] scsi_error_handler+0x0/0x310 [ 32.200688] [] scsi_error_handler+0xa0/0x310 [ 32.200814] [] scsi_error_handler+0x0/0x310 [ 32.200939] [] scsi_error_handler+0x0/0x310 [ 32.201063] [] kthread+0x42/0x70 [ 32.201184] [] kthread+0x0/0x70 [ 32.201304] [] kernel_thread_helper+0x7/0x18 [ 32.201429] ======================= [ 32.404922] Bad IO access at port 0 (return inl(port)) [ 32.405006] BUG: at lib/iomap.c:44 bad_io_access() [ 32.405088] [] ioread32+0x21/0x30 [ 32.405209] [] sata_scr_read+0x2c/0x50 [ 32.405331] [] sata_phy_debounce+0x4f/0xe0 [ 32.405455] [] sata_phy_resume+0x6a/0x80 [ 32.405578] [] mntput_no_expire+0x16/0xa0 [ 32.405701] [] ata_std_prereset+0xb1/0xe0 [ 32.405827] [] ata_std_softreset+0x0/0x110 [ 32.405950] [] ata_do_eh+0x898/0x1aa0 [ 32.406072] [] _atomic_dec_and_lock+0x2f/0x50 [ 32.406198] [] mntput_no_expire+0x16/0xa0 [ 32.406322] [] link_path_walk+0x65/0xc0 [ 32.406445] [] do_path_lookup+0x8e/0x250 [ 32.406568] [] get_empty_filp+0x5f/0x120 [ 32.406692] [] ata_std_softreset+0x0/0x110 [ 32.406816] [] ata_std_prereset+0x0/0xe0 [ 32.406939] [] vsnprintf+0x34e/0x5d0 [ 32.407061] [] __switch_to+0x28/0x1a0 [ 32.407183] [] ata_bmdma_irq_clear+0x15/0x30 [ 32.407308] [] ata_bmdma_drive_eh+0xac/0x140 [ 32.407432] [] scsi_error_handler+0x0/0x310 [ 32.407557] [] ata_std_postreset+0x0/0xb0 [ 32.407680] [] sata_std_hardreset+0x0/0xc0 [ 32.407804] [] ata_std_prereset+0x0/0xe0 [ 32.407927] [] ata_bmdma_error_handler+0x33/0x40 [ 32.408054] [] sata_std_hardreset+0x0/0xc0 [ 32.408179] [] ata_std_postreset+0x0/0xb0 [ 32.408302] [] ata_scsi_error+0x260/0x690 [ 32.408426] [] __sched_text_start+0x283/0x650 [ 32.408551] [] scsi_error_handler+0x0/0x310 [ 32.408676] [] scsi_error_handler+0xa0/0x310 [ 32.408801] [] scsi_error_handler+0x0/0x310 [ 32.408927] [] scsi_error_handler+0x0/0x310 [ 32.409051] [] kthread+0x42/0x70 [ 32.409172] [] kthread+0x0/0x70 [ 32.409292] [] kernel_thread_helper+0x7/0x18 [ 32.409417] ======================= [ 32.420898] Bad IO access at port 0 (return inl(port)) [ 32.420981] BUG: at lib/iomap.c:44 bad_io_access() [ 32.421062] [] process_timeout+0x0/0x10 [ 32.421185] [] ioread32+0x21/0x30 [ 32.421308] [] sata_scr_read+0x2c/0x50 [ 32.421430] [] sata_phy_debounce+0x95/0xe0 [ 32.421553] [] sata_phy_resume+0x6a/0x80 [ 32.421676] [] mntput_no_expire+0x16/0xa0 [ 32.421799] [] ata_std_prereset+0xb1/0xe0 [ 32.421923] [] ata_std_softreset+0x0/0x110 [ 32.422048] [] ata_do_eh+0x898/0x1aa0 [ 32.422171] [] _atomic_dec_and_lock+0x2f/0x50 [ 32.422295] [] mntput_no_expire+0x16/0xa0 [ 32.422419] [] link_path_walk+0x65/0xc0 [ 32.422542] [] do_path_lookup+0x8e/0x250 [ 32.422665] [] get_empty_filp+0x5f/0x120 [ 32.422788] [] ata_std_softreset+0x0/0x110 [ 32.422912] [] ata_std_prereset+0x0/0xe0 [ 32.423035] [] vsnprintf+0x34e/0x5d0 [ 32.423158] [] __switch_to+0x28/0x1a0 [ 32.425335] [] ata_bmdma_irq_clear+0x15/0x30 [ 32.425459] [] ata_bmdma_drive_eh+0xac/0x140 [ 32.425584] [] scsi_error_handler+0x0/0x310 [ 32.425709] [] ata_std_postreset+0x0/0xb0 [ 32.425833] [] sata_std_hardreset+0x0/0xc0 [ 32.425956] [] ata_std_prereset+0x0/0xe0 [ 32.426079] [] ata_bmdma_error_handler+0x33/0x40 [ 32.426205] [] sata_std_hardreset+0x0/0xc0 [ 32.426329] [] ata_std_postreset+0x0/0xb0 [ 32.426452] [] ata_scsi_error+0x260/0x690 [ 32.426576] [] __sched_text_start+0x283/0x650 [ 32.426701] [] scsi_error_handler+0x0/0x310 [ 32.426826] [] scsi_error_handler+0xa0/0x310 [ 32.426951] [] scsi_error_handler+0x0/0x310 [ 32.427075] [] scsi_error_handler+0x0/0x310 [ 32.427200] [] kthread+0x42/0x70 [ 32.427320] [] kthread+0x0/0x70 [ 32.427441] [] kernel_thread_helper+0x7/0x18 [ 32.427565] ======================= [ 32.436875] Bad IO access at port 0 (return inl(port)) [ 32.436958] BUG: at lib/iomap.c:44 bad_io_access() [ 32.437040] [] process_timeout+0x0/0x10 [ 32.437162] [] ioread32+0x21/0x30 [ 32.437283] [] sata_scr_read+0x2c/0x50 [ 32.437406] [] sata_phy_debounce+0x95/0xe0 [ 32.437530] [] sata_phy_resume+0x6a/0x80 [ 32.437653] [] mntput_no_expire+0x16/0xa0 [ 32.437776] [] ata_std_prereset+0xb1/0xe0 [ 32.437900] [] ata_std_softreset+0x0/0x110 [ 32.438023] [] ata_do_eh+0x898/0x1aa0 [ 32.438145] [] _atomic_dec_and_lock+0x2f/0x50 [ 32.438270] [] mntput_no_expire+0x16/0xa0 [ 32.438393] [] link_path_walk+0x65/0xc0 [ 32.438519] [] do_path_lookup+0x8e/0x250 [ 32.438642] [] get_empty_filp+0x5f/0x120 [ 32.438766] [] ata_std_softreset+0x0/0x110 [ 32.438889] [] ata_std_prereset+0x0/0xe0 [ 32.439013] [] vsnprintf+0x34e/0x5d0 [ 32.439135] [] __switch_to+0x28/0x1a0 [ 32.439257] [] ata_bmdma_irq_clear+0x15/0x30 [ 32.439382] [] ata_bmdma_drive_eh+0xac/0x140 [ 32.439507] [] scsi_error_handler+0x0/0x310 [ 32.439631] [] ata_std_postreset+0x0/0xb0 [ 32.439755] [] sata_std_hardreset+0x0/0xc0 [ 32.439879] [] ata_std_prereset+0x0/0xe0 [ 32.440002] [] ata_bmdma_error_handler+0x33/0x40 [ 32.440128] [] sata_std_hardreset+0x0/0xc0 [ 32.440252] [] ata_std_postreset+0x0/0xb0 [ 32.440375] [] ata_scsi_error+0x260/0x690 [ 32.440499] [] __sched_text_start+0x283/0x650 [ 32.440624] [] scsi_error_handler+0x0/0x310 [ 32.440749] [] scsi_error_handler+0xa0/0x310 [ 32.440876] [] scsi_error_handler+0x0/0x310 [ 32.441000] [] scsi_error_handler+0x0/0x310 [ 32.441124] [] kthread+0x42/0x70 [ 32.441245] [] kthread+0x0/0x70 [ 32.441365] [] kernel_thread_helper+0x7/0x18 [ 32.441489] ======================= [ 32.452851] Bad IO access at port 0 (return inl(port)) [ 32.452934] BUG: at lib/iomap.c:44 bad_io_access() [ 32.453016] [] process_timeout+0x0/0x10 [ 32.453139] [] ioread32+0x21/0x30 [ 32.453260] [] sata_scr_read+0x2c/0x50 [ 32.453383] [] sata_phy_debounce+0x95/0xe0 [ 32.453506] [] sata_phy_resume+0x6a/0x80 [ 32.453629] [] mntput_no_expire+0x16/0xa0 [ 32.453754] [] ata_std_prereset+0xb1/0xe0 [ 32.453878] [] ata_std_softreset+0x0/0x110 [ 32.454002] [] ata_do_eh+0x898/0x1aa0 [ 32.454125] [] _atomic_dec_and_lock+0x2f/0x50 [ 32.454250] [] mntput_no_expire+0x16/0xa0 [ 32.454373] [] link_path_walk+0x65/0xc0 [ 32.454496] [] do_path_lookup+0x8e/0x250 [ 32.454620] [] get_empty_filp+0x5f/0x120 [ 32.454743] [] ata_std_softreset+0x0/0x110 [ 32.454867] [] ata_std_prereset+0x0/0xe0 [ 32.454990] [] vsnprintf+0x34e/0x5d0 [ 32.455113] [] __switch_to+0x28/0x1a0 [ 32.455234] [] ata_bmdma_irq_clear+0x15/0x30 [ 32.455359] [] ata_bmdma_drive_eh+0xac/0x140 [ 32.455484] [] scsi_error_handler+0x0/0x310 [ 32.455608] [] ata_std_postreset+0x0/0xb0 [ 32.455731] [] sata_std_hardreset+0x0/0xc0 [ 32.455855] [] ata_std_prereset+0x0/0xe0 [ 32.455979] [] ata_bmdma_error_handler+0x33/0x40 [ 32.456104] [] sata_std_hardreset+0x0/0xc0 [ 32.456228] [] ata_std_postreset+0x0/0xb0 [ 32.456351] [] ata_scsi_error+0x260/0x690 [ 32.456476] [] __sched_text_start+0x283/0x650 [ 32.456601] [] scsi_error_handler+0x0/0x310 [ 32.456725] [] scsi_error_handler+0xa0/0x310 [ 32.456851] [] scsi_error_handler+0x0/0x310 [ 32.456976] [] scsi_error_handler+0x0/0x310 [ 32.457101] [] kthread+0x42/0x70 [ 32.457221] [] kthread+0x0/0x70 [ 32.457341] [] kernel_thread_helper+0x7/0x18 [ 32.457465] ======================= [ 32.468828] Bad IO access at port 0 (return inl(port)) [ 32.468911] BUG: at lib/iomap.c:44 bad_io_access() [ 32.468993] [] process_timeout+0x0/0x10 [ 32.469117] [] ioread32+0x21/0x30 [ 32.469238] [] sata_scr_read+0x2c/0x50 [ 32.469362] [] sata_phy_debounce+0x95/0xe0 [ 32.469486] [] sata_phy_resume+0x6a/0x80 [ 32.469609] [] mntput_no_expire+0x16/0xa0 [ 32.469733] [] ata_std_prereset+0xb1/0xe0 [ 32.469857] [] ata_std_softreset+0x0/0x110 [ 32.469981] [] ata_do_eh+0x898/0x1aa0 [ 32.470104] [] _atomic_dec_and_lock+0x2f/0x50 [ 32.470228] [] mntput_no_expire+0x16/0xa0 [ 32.470352] [] link_path_walk+0x65/0xc0 [ 32.470475] [] do_path_lookup+0x8e/0x250 [ 32.470598] [] get_empty_filp+0x5f/0x120 [ 32.470720] [] ata_std_softreset+0x0/0x110 [ 32.470844] [] ata_std_prereset+0x0/0xe0 [ 32.470967] [] vsnprintf+0x34e/0x5d0 [ 32.471090] [] __switch_to+0x28/0x1a0 [ 32.471211] [] ata_bmdma_irq_clear+0x15/0x30 [ 32.471336] [] ata_bmdma_drive_eh+0xac/0x140 [ 32.471460] [] scsi_error_handler+0x0/0x310 [ 32.471585] [] ata_std_postreset+0x0/0xb0 [ 32.471709] [] sata_std_hardreset+0x0/0xc0 [ 32.471832] [] ata_std_prereset+0x0/0xe0 [ 32.471955] [] ata_bmdma_error_handler+0x33/0x40 [ 32.472082] [] sata_std_hardreset+0x0/0xc0 [ 32.472205] [] ata_std_postreset+0x0/0xb0 [ 32.472328] [] ata_scsi_error+0x260/0x690 [ 32.472453] [] __sched_text_start+0x283/0x650 [ 32.472577] [] scsi_error_handler+0x0/0x310 [ 32.472702] [] scsi_error_handler+0xa0/0x310 [ 32.472828] [] scsi_error_handler+0x0/0x310 [ 32.472954] [] scsi_error_handler+0x0/0x310 [ 32.473079] [] kthread+0x42/0x70 [ 32.473199] [] kthread+0x0/0x70 [ 32.473319] [] kernel_thread_helper+0x7/0x18 [ 32.473444] ======================= [ 32.520755] ata3: SATA link down (SStatus FFFFFFFF SControl FFFFFFFF) [ 32.832296] ata4: SATA link down (SStatus FFFFFFFF SControl FFFFFFFF) [ 32.999603] ATA: abnormal status 0x8 on port 0x00019c07 [ 32.999745] ieee1394: raw1394: /dev/raw1394 device initialized [ 32.999986] eth1394: eth2: IPv4 over IEEE 1394 (fw-host0) [ 33.000555] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 9 [ 33.000643] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUB2] -> GSI 9 (level, low) -> IRQ 9 [ 33.000854] PCI: Setting latency timer of device 0000:00:02.2 to 64 [ 33.000858] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 33.001004] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 [ 33.001161] ehci_hcd 0000:00:02.2: debug port 1 [ 33.001245] PCI: cache line size of 64 is not supported by device 0000:00:02.2 [ 33.001254] ehci_hcd 0000:00:02.2: irq 9, io mem 0xe8085000 [ 33.001345] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 33.001618] usb usb1: configuration #1 chosen from 1 choice [ 33.001747] hub 1-0:1.0: USB hub found [ 33.001837] hub 1-0:1.0: 6 ports detected [ 33.103961] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 33.104247] ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 12 [ 33.104334] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUBA] -> GSI 12 (level, low) -> IRQ 12 [ 33.104544] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 33.104548] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 33.104667] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 33.104796] ohci_hcd 0000:00:02.0: irq 12, io mem 0xe8081000 [ 33.161904] usb usb2: configuration #1 chosen from 1 choice [ 33.162024] hub 2-0:1.0: USB hub found [ 33.162114] hub 2-0:1.0: 3 ports detected [ 33.263929] ACPI: PCI Interrupt Link [LUBB] enabled at IRQ 11 [ 33.264016] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUBB] -> GSI 11 (level, low) -> IRQ 11 [ 33.264224] PCI: Setting latency timer of device 0000:00:02.1 to 64 [ 33.264227] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 33.264347] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 33.264473] ohci_hcd 0000:00:02.1: irq 11, io mem 0xe8084000 [ 33.321677] usb usb3: configuration #1 chosen from 1 choice [ 33.321803] hub 3-0:1.0: USB hub found [ 33.321892] hub 3-0:1.0: 3 ports detected [ 33.423489] USB Universal Host Controller Interface driver v3.0 [ 33.782903] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 33.949621] usb 3-1: configuration #1 chosen from 1 choice [ 34.108086] ohci1394: fw-host0: SelfID received outside of bus reset sequence [ 34.298147] usb 3-2: new full speed USB device using ohci_hcd and address 3 [ 34.465758] usb 3-2: configuration #1 chosen from 1 choice [ 34.475708] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04E8 pid 0x326C [ 34.475850] usbcore: registered new interface driver usblp [ 34.475936] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 34.476027] Initializing USB Mass Storage driver... [ 34.476148] usbcore: registered new interface driver usb-storage [ 34.476235] USB Mass Storage support registered. [ 34.476388] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 34.476476] PNP: PS/2 controller doesn't have AUX irq; using default 12 [ 34.725901] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 34.726079] mice: PS/2 mouse device common for all mice [ 34.752830] input: AT Translated Set 2 keyboard as /class/input/input2 [ 34.752935] md: raid0 personality registered for level 0 [ 34.753086] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com [ 34.760441] input: Logitech USB-PS/2 Mouse as /class/input/input3 [ 34.760564] input: USB HID v1.00 Mouse [Logitech USB-PS/2 Mouse] on usb-0000:00:02.1-1 [ 34.760779] usbcore: registered new interface driver usbhid [ 34.760866] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 34.760981] Advanced Linux Sound Architecture Driver Version 1.0.14rc4 (Wed May 09 09:51:39 2007 UTC). [ 34.761105] ALSA device list: [ 34.761193] No soundcards found. [ 34.761292] IPv4 over IPv4 tunneling driver [ 34.761445] GRE over IPv4 tunneling driver [ 34.761604] TCP cubic registered [ 34.761688] NET: Registered protocol family 1 [ 34.761771] NET: Registered protocol family 17 [ 34.761889] Testing NMI watchdog ... OK. [ 34.841339] Using IPI Shortcut mode [ 34.841716] md: Autodetecting RAID arrays. [ 34.841798] md: autorun ... [ 34.841873] md: ... autorun DONE. [ 34.858241] ReiserFS: hda2: found reiserfs format "3.6" with standard journal [ 34.858339] ReiserFS: hda2: using ordered data mode [ 34.863578] ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 34.865233] ReiserFS: hda2: checking transaction log (hda2) [ 34.910846] ReiserFS: hda2: Using r5 hash to sort names [ 34.910956] VFS: Mounted root (reiserfs filesystem) readonly. [ 34.911341] Freeing unused kernel memory: 208k freed [ 37.908491] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 [ 37.908514] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5500 [ 38.441337] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11 [ 38.441343] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 11 (level, low) -> IRQ 11 [ 38.441372] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 38.759638] intel8x0_measure_ac97_clock: measured 52781 usecs [ 38.759644] intel8x0: clocking to 47503 [ 56.760486] ReiserFS: dm-0: found reiserfs format "3.6" with standard journal [ 56.760507] ReiserFS: dm-0: using ordered data mode [ 56.760684] ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 56.762260] ReiserFS: dm-0: checking transaction log (dm-0) [ 56.779528] ReiserFS: dm-0: Using r5 hash to sort names [ 60.316791] Adding 2097144k swap on /mnt/raidchunk/swapfile.bin. Priority:-1 extents:457 across:2100884k [ 65.504930] eth1: no link during initialization. [ 91.651175] eth0: network connection up using port A [ 91.651182] speed: 1000 [ 91.651184] autonegotiation: yes [ 91.651185] duplex mode: full [ 91.651187] flowctrl: symmetric [ 91.651189] role: slave [ 91.651190] irq moderation: disabled [ 91.651192] scatter-gather: disabled [ 91.651194] tx-checksum: disabled [ 91.651195] rx-checksum: disabled --------------090608090205050902060103 Content-Type: text/plain; name="dmesg_subsection-2.6.21.1.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg_subsection-2.6.21.1.txt" [ 30.980942] sata_via 0000:01:07.0: version 2.1 [ 30.981275] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 12 [ 30.981279] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK4] -> GSI 12 (level, low) -> IRQ 12 [ 30.981298] sata_via 0000:01:07.0: routed to hard irq line 12 [ 30.981367] ata3: SATA max UDMA/133 cmd 0x00019400 ctl 0x0001940a bmdma 0x0001a400 irq 12 [ 30.981403] ata4: SATA max UDMA/133 cmd 0x00019800 ctl 0x0001980a bmdma 0x0001a408 irq 12 [ 30.981437] ata5: PATA max UDMA/133 cmd 0x00019c00 ctl 0x00019c0a bmdma 0x0001a410 irq 12 [ 30.981454] scsi2 : sata_via [ 31.120479] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 11 [ 31.120486] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 11 (level, low) -> IRQ 11 [ 31.120520] PCI: Setting latency timer of device 0000:00:06.0 to 64 [ 31.135776] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 31.144016] ata3.00: ATA-7: WDC WD3200AAKS-00SBA0, 12.01B01, max UDMA/133 [ 31.144021] ata3.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 31.152025] ata3.00: configured for UDMA/133 [ 31.152047] scsi3 : sata_via [ 31.307512] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 31.324869] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x1) [ 31.443258] intel8x0_measure_ac97_clock: measured 52722 usecs [ 31.443264] intel8x0: clocking to 47450 [ 31.982496] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 31.995489] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x1) [ 31.995495] ata4.00: limiting speed to UDMA7:PIO5 [ 32.653509] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 32.666118] ata4.00: ATA-7: WDC WD3200AAKS-00SBA0, 12.01B01, max UDMA/133 [ 32.666122] ata4.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32) [ 32.680112] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x1) [ 32.680115] ata4.00: revalidation failed (errno=-5) [ 32.680117] ata4.00: disabled [ 33.180715] scsi4 : sata_via [ 33.348013] ATA: abnormal status 0x8 on port 0x00019c07 [ 33.348122] scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5 [ 33.348313] SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB) [ 33.348327] sdc: Write Protect is off [ 33.348329] sdc: Mode Sense: 00 3a 00 00 [ 33.348344] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.348412] SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB) [ 33.348422] sdc: Write Protect is off [ 33.348424] sdc: Mode Sense: 00 3a 00 00 [ 33.348438] SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 33.348442] sdc: unknown partition table [ 33.364613] sd 2:0:0:0: Attached scsi disk sdc [ 33.364769] sd 2:0:0:0: Attached scsi generic sg2 type 0 --------------090608090205050902060103--