From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tejun Heo Subject: Re: Linux v2.6.22-rc3 Date: Tue, 29 May 2007 11:28:36 +0200 Message-ID: <465BF244.5080200@gmail.com> References: <9d2cd630705270801m2826be60p3f802c502b26c531@mail.gmail.com> <46599E6B.1000209@pobox.com> <9d2cd630705270907y4722653cpf79f073fa8f12f08@mail.gmail.com> <9d2cd630705271315x7030c91ew2f175c921c022880@mail.gmail.com> <465AA536.6080608@gmail.com> <9d2cd630705280707h4921900fxc93a07a87f0bdf66@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: Received: from py-out-1112.google.com ([64.233.166.183]:15797 "EHLO py-out-1112.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757645AbXE2LUA (ORCPT ); Tue, 29 May 2007 07:20:00 -0400 Received: by py-out-1112.google.com with SMTP id a29so831976pyi for ; Tue, 29 May 2007 04:20:00 -0700 (PDT) In-Reply-To: <9d2cd630705280707h4921900fxc93a07a87f0bdf66@mail.gmail.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Gregor Jasny Cc: Linus Torvalds , Jeff Garzik , Linux Kernel Mailing List , linux-ide@vger.kernel.org, Alan Cox Hello, Gregor. Gregor Jasny wrote: > [ 18.639188] ata_piix 0000:00:07.1: version 2.11 > [ 18.639718] scsi0 : ata_piix > [ 18.640189] scsi1 : ata_piix > [ 18.640541] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 > bmdma 0x00010860 irq 14 > [ 18.641148] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 > bmdma 0x00010868 irq 15 > [ 0.653333] Marking TSC unstable due to: possible TSC halt in C2. > [ 0.656666] Time: acpi_pm clocksource has been installed. > [ 0.656666] Switched to NOHz mode on CPU #0 > [ 0.779999] ata1.00: ata_hpa_resize 1: sectors = 78242976, > hpa_sectors = 78242976 > [ 0.779999] ata1.00: ATA-7: SAMSUNG MP0402H, UC100-14, max UDMA/100 > [ 0.796666] ata1.00: 78242976 sectors, multi 8: LBA48 > [ 0.816666] ata1.00: ata_hpa_resize 1: sectors = 78242976, > hpa_sectors = 78242976 > [ 0.829999] ata1.00: configured for UDMA/33 > [ 1.376666] Clocksource tsc unstable (delta = -496294688 ns) > [ 10.866665] ata2: SRST failed (errno=-16) > [ 20.899997] ata2: SRST failed (errno=-16) > [ 55.946661] ata2: SRST failed (errno=-16) > [ 60.966660] ata2: SRST failed (errno=-16) > [ 60.979993] ata2: reset failed, giving up Aieee, so the drive doesn't like the new SRST sequence. Indan pointed me to your original posting and before the reset sequence update your drive was reset successfully but only after 30sec delay, right? If you change the first entry in ata_eh_reset_timeouts[] table at the top of libata-eh.c to 35 * HZ, does it work? Thanks. -- tejun