From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Greaves Subject: Re: 2.6.22-rc3 hibernate(?) disables SMART on ide Date: Tue, 05 Jun 2007 10:03:54 +0100 Message-ID: <466526FA.3090506@dgreaves.com> References: <46609290.5030701@dgreaves.com> <46613C53.8010205@gmail.com> <4661E6CA.1080203@dgreaves.com> <46643DE5.3080904@rtr.ca> <46644A71.7060300@dgreaves.com> <4664E3F5.9080904@rtr.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: Received: from s2.ukfsn.org ([217.158.120.143]:39028 "EHLO mail.ukfsn.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1761928AbXFEJD5 (ORCPT ); Tue, 5 Jun 2007 05:03:57 -0400 In-Reply-To: <4664E3F5.9080904@rtr.ca> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Mark Lord Cc: Tejun Heo , "'linux-kernel@vger.kernel.org'" , IDE Linux , ballen@gravity.phys.uwm.edu Mark Lord wrote: > That's odd. Could you try that again, > with the latest (either v7.3 or v7.4) version of hdparm > (from sourceforge) ? Using Debian's 7.3 via apt-get experimental - is that OK or would you like me to compile the upstream? 2.6.21.1 cu:~# hdparm -V hdparm v7.3 cu:~# hdparm -K1 /dev/hda /dev/hda: setting drive keep features to 1 (on) HDIO_DRIVE_CMD(keepsettings) failed: Input/output error dmesg: skge eth0: Link is up at 1000 Mbps, full duplex, flow control both hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hda: drive_cmd: error=0x04 { DriveStatusError } ide: failed opcode was: 0xef David