From mboxrd@z Thu Jan 1 00:00:00 1970 From: thomas schorpp Subject: Re: [Fwd: promise-sata-pata, No release code PATA port on Promise PDC20579, TODO?] Date: Tue, 26 Jun 2007 20:40:25 +0200 Message-ID: <46815D99.3050301@gmx.de> References: <4555C0B0.1020608@gmx.de> <45579B4D.2010303@gmx.de> Reply-To: t.schorpp@gmx.de Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from mail.gmx.net ([213.165.64.20]:40918 "HELO mail.gmx.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1757337AbXFZSk2 (ORCPT ); Tue, 26 Jun 2007 14:40:28 -0400 In-Reply-To: <45579B4D.2010303@gmx.de> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org thomas schorpp wrote: > thomas schorpp wrote: >> >> ------------------------------------------------------------------------ >> >> Subject: >> promise-sata-pata, No release code PATA port on Promise PDC20579, TODO? >> From: >> thomas schorpp >> Date: >> Fri, 10 Nov 2006 14:41:53 +0100 >> To: >> Linux SCSI list >> >> To: >> Linux SCSI list >> >> >> hi, >> >> got a msi neo-2 fir now, cause nforce4 is incompatible with scsi+2xdvb >> on its pci. >> >> like to use the PATA port of PDC20579 SATA II 150. >> >> pls list TODOs and outstanding issues blocking the release. >> >> some testcases for me? >> >> y >> tom >> - >> To unsubscribe from this list: send the line "unsubscribe linux-scsi" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> >> > > no support at all for this chip's PATA in libata-dev.git: > > ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 21 > ata1: SATA max UDMA/133 cmd 0xE0EE4200 ctl 0xE0EE4238 bmdma 0x0 irq 21 > ata2: SATA max UDMA/133 cmd 0xE0EE4280 ctl 0xE0EE42B8 bmdma 0x0 irq 21 > scsi1 : sata_promise > ata1: SATA link down (SStatus 0 SControl 300) > scsi2 : sata_promise > ata2: SATA link down (SStatus 0 SControl 300) > sata_promise: loaded successfully > ohci1394: already loaded > ata_generic: loaded successfully > pata_via: loaded successfully > > but it is mentioned in source, some hints to enable it, pls. > > thx, > y > tom > - > To unsubscribe from this list: send the line "unsubscribe linux-ide" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > > thx for releasing (missed it), it's working, done great: libata version 2.20 loaded. sata_promise 0000:00:0d.0: version 2.00 ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 17 sata_promise PATA port found ata1: SATA max UDMA/133 cmd 0xffffc20000022200 ctl 0xffffc20000022238 bmdma 0x0000000000000000 irq 17 ata2: SATA max UDMA/133 cmd 0xffffc20000022280 ctl 0xffffc200000222b8 bmdma 0x0000000000000000 irq 17 ata3: PATA max UDMA/133 cmd 0xffffc20000022300 ctl 0xffffc20000022338 bmdma 0x0000000000000000 irq 17 scsi1 : sata_promise ata1: SATA link down (SStatus 0 SControl 300) scsi2 : sata_promise ata2: SATA link down (SStatus 0 SControl 300) scsi3 : sata_promise ata3.00: ATA-6: ST3120026A, 8.01, max UDMA/100 ata3.00: 234441648 sectors, multi 0: LBA48 ata3.00: configured for UDMA/100 scsi 3:0:0:0: Direct-Access ATA ST3120026A 8.01 PQ: 0 ANSI: 5 SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 3:0:0:0: Attached scsi disk sdb sd 3:0:0:0: Attached scsi generic sg1 type 0 smartmontools and hddtemp are working, too. i'll report if any issues or regression. y tom