* Failed to IDENTIFY SATA harddrive on sata_sil24
@ 2007-06-27 15:14 Thomas Tsai
2007-06-27 18:16 ` Jeff Garzik
2007-07-03 7:52 ` Tejun Heo
0 siblings, 2 replies; 3+ messages in thread
From: Thomas Tsai @ 2007-06-27 15:14 UTC (permalink / raw)
To: linux-ide
Hi,
Does anyone familiar with SiliconImage 3132 SATA controller?
I'm running siliconimage 3132 as e-Sata controller on my ARM-based board.
My kernel version is 2.6.18.6. I built libata and sata_sil24 as kernel module.
After I insert libata and sata_sil24 module, and plug external
harddrive via e-Sata.
sata_sil24.c can detect phy changed, and found a ATA device.
And then it will issue IDENTIFY(0xec) command but time out to get
command completion.
And Sil3132 seems dead or enter into an unknown state.Since it will
not issue any interrupts even I remove and replug the e-Sata cable.
Does anyone have experienced this situation, or any suggestion.
Thanks.
bthomastsai
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Failed to IDENTIFY SATA harddrive on sata_sil24
2007-06-27 15:14 Failed to IDENTIFY SATA harddrive on sata_sil24 Thomas Tsai
@ 2007-06-27 18:16 ` Jeff Garzik
2007-07-03 7:52 ` Tejun Heo
1 sibling, 0 replies; 3+ messages in thread
From: Jeff Garzik @ 2007-06-27 18:16 UTC (permalink / raw)
To: Thomas Tsai; +Cc: linux-ide
Thomas Tsai wrote:
> Does anyone familiar with SiliconImage 3132 SATA controller?
> I'm running siliconimage 3132 as e-Sata controller on my ARM-based board.
> My kernel version is 2.6.18.6. I built libata and sata_sil24 as kernel
> module.
> After I insert libata and sata_sil24 module, and plug external
> harddrive via e-Sata.
> sata_sil24.c can detect phy changed, and found a ATA device.
> And then it will issue IDENTIFY(0xec) command but time out to get
> command completion.
> And Sil3132 seems dead or enter into an unknown state.Since it will
> not issue any interrupts even I remove and replug the e-Sata cable.
Your platform's interrupt delivery is broken.
Jeff
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Failed to IDENTIFY SATA harddrive on sata_sil24
2007-06-27 15:14 Failed to IDENTIFY SATA harddrive on sata_sil24 Thomas Tsai
2007-06-27 18:16 ` Jeff Garzik
@ 2007-07-03 7:52 ` Tejun Heo
1 sibling, 0 replies; 3+ messages in thread
From: Tejun Heo @ 2007-07-03 7:52 UTC (permalink / raw)
To: Thomas Tsai; +Cc: linux-ide
Thomas Tsai wrote:
> Hi,
>
> Does anyone familiar with SiliconImage 3132 SATA controller?
> I'm running siliconimage 3132 as e-Sata controller on my ARM-based board.
> My kernel version is 2.6.18.6. I built libata and sata_sil24 as kernel
> module.
> After I insert libata and sata_sil24 module, and plug external
> harddrive via e-Sata.
> sata_sil24.c can detect phy changed, and found a ATA device.
> And then it will issue IDENTIFY(0xec) command but time out to get
> command completion.
> And Sil3132 seems dead or enter into an unknown state.Since it will
> not issue any interrupts even I remove and replug the e-Sata cable.
> Does anyone have experienced this situation, or any suggestion.
> Thanks.
You need to post the kernel log at least.
--
tejun
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2007-07-03 7:53 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-06-27 15:14 Failed to IDENTIFY SATA harddrive on sata_sil24 Thomas Tsai
2007-06-27 18:16 ` Jeff Garzik
2007-07-03 7:52 ` Tejun Heo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).