From: Albert Lee <albertcc@tw.ibm.com>
To: Jeff Garzik <jeff@garzik.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>, Tejun Heo <htejun@gmail.com>,
Linux IDE <linux-ide@vger.kernel.org>,
Doug Maxey <dwm@enoyolf.org>
Subject: [PATCH 5/10] libata: use freeze/thaw for polling
Date: Wed, 04 Jul 2007 16:57:19 +0800 [thread overview]
Message-ID: <468B60EF.8030009@tw.ibm.com> (raw)
In-Reply-To: <468B5C97.1000803@tw.ibm.com>
Patch 5/10:
This patch changes polling codes to use freeze()/thaw() for irq off/on.
The reason is: some ATAPI devices raises INTRQ even of nIEN = 1.
Using the host adapter irq mask mechanism, if available, is more reliable than the device nIEN bit.
ata_qc_set_polling() is also removed since now unused.
Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
---
Considerations:
HSM, the new user of freeze()/thaw(), will call freeze()/thaw() in higher frequency than EH.
Can current implemention of freeze()/thaw() handle it?
diff -Nrup 04_convert_freeze/drivers/ata/libata-core.c 05_convert_hsm_to_freeze/drivers/ata/libata-core.c
--- 04_convert_freeze/drivers/ata/libata-core.c 2007-07-04 11:57:33.000000000 +0800
+++ 05_convert_hsm_to_freeze/drivers/ata/libata-core.c 2007-07-04 13:13:56.000000000 +0800
@@ -4753,7 +4753,7 @@ static void ata_hsm_qc_complete(struct a
qc = ata_qc_from_tag(ap, qc->tag);
if (qc) {
if (likely(!(qc->err_mask & AC_ERR_HSM))) {
- ap->ops->irq_on(ap);
+ ap->ops->thaw(ap);
ata_qc_complete(qc);
} else
ata_port_freeze(ap);
@@ -4769,7 +4769,7 @@ static void ata_hsm_qc_complete(struct a
} else {
if (in_wq) {
spin_lock_irqsave(ap->lock, flags);
- ap->ops->irq_on(ap);
+ ap->ops->thaw(ap);
ata_qc_complete(qc);
spin_unlock_irqrestore(ap->lock, flags);
} else
@@ -5411,7 +5411,7 @@ unsigned int ata_qc_issue_prot(struct at
switch (qc->tf.protocol) {
case ATA_PROT_NODATA:
if (qc->tf.flags & ATA_TFLAG_POLLING)
- ata_qc_set_polling(qc);
+ ap->ops->freeze(ap);
ata_tf_to_host(ap, &qc->tf);
ap->hsm_task_state = HSM_ST_LAST;
@@ -5432,7 +5432,7 @@ unsigned int ata_qc_issue_prot(struct at
case ATA_PROT_PIO:
if (qc->tf.flags & ATA_TFLAG_POLLING)
- ata_qc_set_polling(qc);
+ ap->ops->freeze(ap);
ata_tf_to_host(ap, &qc->tf);
@@ -5461,7 +5461,7 @@ unsigned int ata_qc_issue_prot(struct at
case ATA_PROT_ATAPI:
case ATA_PROT_ATAPI_NODATA:
if (qc->tf.flags & ATA_TFLAG_POLLING)
- ata_qc_set_polling(qc);
+ ap->ops->freeze(ap);
ata_tf_to_host(ap, &qc->tf);
diff -Nrup 04_convert_freeze/include/linux/libata.h 05_convert_hsm_to_freeze/include/linux/libata.h
--- 04_convert_freeze/include/linux/libata.h 2007-07-04 11:57:33.000000000 +0800
+++ 05_convert_hsm_to_freeze/include/linux/libata.h 2007-07-04 13:13:56.000000000 +0800
@@ -1097,11 +1097,6 @@ static inline u8 ata_wait_idle(struct at
return status;
}
-static inline void ata_qc_set_polling(struct ata_queued_cmd *qc)
-{
- qc->tf.ctl |= ATA_NIEN;
-}
-
static inline struct ata_queued_cmd *__ata_qc_from_tag(struct ata_port *ap,
unsigned int tag)
{
next prev parent reply other threads:[~2007-07-04 8:57 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-04 8:38 [PATCH 0/10] libata: irq_on/off restructuring Albert Lee
2007-07-04 8:43 ` [PATCH 1/10] libata: remove irq_on from ata_bus_reset() and ata_std_postreset() Albert Lee
2007-07-05 10:18 ` Tejun Heo
2007-07-04 8:46 ` [PATCH 2/10] libata: add irq_off Albert Lee
2007-07-04 8:49 ` [PATCH 3/10] libata: implement ->irq_off in LLDDs Albert Lee
2007-07-04 8:52 ` [PATCH 4/10] libata: call irq_off from bmdma_freeze() Albert Lee
2007-07-04 8:57 ` Albert Lee [this message]
2007-07-04 8:59 ` [PATCH 6/10] libata: add freeze/thaw to old EH LLDDs Albert Lee
2007-07-04 9:01 ` [PATCH 7/10] libata: pdc_freeze() semantic change Albert Lee
2007-07-04 9:03 ` [PATCH 8/10] libata: remove writing of tf->ctl from ata_tf_load() Albert Lee
2007-07-04 19:09 ` Mark Lord
2007-07-05 2:43 ` Albert Lee
2007-07-05 10:40 ` Tejun Heo
2007-07-04 9:16 ` [PATCH 9/10] libata: Integrate freeze/thaw with irq_on/off Albert Lee
2007-07-04 9:29 ` [PATCH 10/10] libata: Integrate freeze/thaw with irq_on/off in LLDDs Albert Lee
2007-07-05 10:48 ` [PATCH 0/10] libata: irq_on/off restructuring Tejun Heo
2007-07-06 9:23 ` Albert Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=468B60EF.8030009@tw.ibm.com \
--to=albertcc@tw.ibm.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=albertl@mail.com \
--cc=dwm@enoyolf.org \
--cc=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).