From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jeff Garzik Subject: libata-dev.git clean up and branch status Date: Fri, 06 Jul 2007 20:21:10 -0400 Message-ID: <468EDC76.9050708@garzik.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Sender: linux-kernel-owner@vger.kernel.org To: IDE/ATA development list Cc: Andrew Morton , Linux Kernel Mailing List List-Id: linux-ide@vger.kernel.org libata-dev.git was left a bit grotty when I went on vacation. That has now been fixed. The current branches are: git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git master Always vanilla Linus tree ALL Always the "exported for testing" meta-branch (currently == upstream + sil680-mmio + mv-ahci) upstream queued for 2.6.23 Parent: master mv-ahci Marvell 6121/6141 AHCI clone SATA support Parent: upstream Status: Works, once NCQ & PCI MSI are disabled. Turn these off, then can go up. mv-ahci-pata Marvell 6121/6141 AHCI clone PATA support Parent: mv-ahci Status: Need to update for proper use of PATA controller commands (provides direct access to PATA device shadow registers) mv-eh sata_mv (50xx/60xx) conversion to new EH Parent: upstream Status: Required for hotplug, NCQ, etc. Working, but currently NCQ disks fail (even if NCQ not used) new-eh pdc_adma, sata_qstor, sata_sx4 conversion to new EH Parent: upstream Status: All conversions complete... and completely untested. sii-lbt sata_sil Large [DMA] Block Transfer support Parent: upstream Status: Useful, but reported to fail in some cases sil680-mmio pata_sil680 MMIO support Parent: upstream Status: dissolved into some argument about MMIO flushing