From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Backlund Subject: Re: Problem with SiS Ide/Pata/Sata on 2.6.22-rc7-git4 Date: Tue, 10 Jul 2007 23:51:54 +0300 Message-ID: <4693F16A.4050709@mandriva.org> References: <4692A7C3.9030802@mandriva.org> <20070709232742.004def28@the-village.bc.nu> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from mbox1.netikka.net ([213.250.81.202]:34517 "EHLO mbox1.netikka.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755199AbXGJUv6 (ORCPT ); Tue, 10 Jul 2007 16:51:58 -0400 In-Reply-To: <20070709232742.004def28@the-village.bc.nu> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Alan Cox Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org Alan Cox skrev: >> If you modprobe only sis5513 >> OR >> If you modprobe only sis5513 and then sata_sis/pata_sis: >> - you get this: >> (the hdb drive does not get detected/usable) > > Don't mix old and new IDE like that. We allow both so you can use old SIS > and new Jmicron etc for example but there are some cases where trying to > load both old and new IDE support for the same chip will do strange > things. > But there is still a regression here compared to 2.6.17... If you load only sis5513 on a 2.6.22 you still get: --- quote --- <6>SIS5513: chipset revision 1 <6>SIS5513: not 100% native mode: will probe irqs later <6>SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller <6> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio, hdb:pio <6> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio <7>Probing IDE interface ide0... <4>hdb: QUANTUM FIREBALLlct15 07, ATA DISK drive <4>hdb: host side 80-wire cable detection failed, limiting max speed to UDMA33 <7>hdb: selected mode 0x42 --- quote --- wich does not happend on 2.6.17... The disk in question is ATA66 capable -- Thomas