Jul 20 13:20:15 ts28 cdrom: entering cdrom_open
Jul 20 13:20:15 ts28 scsi_block_when_processing_errors: rtn: 1
Jul 20 13:20:15 ts28 cdrom: Use count for "/dev/sr0" now 1
Jul 20 13:20:15 ts28 scsi_add_timer: scmd: ffff8100defba840, time: 30000, (ffffffff80382c14)
Jul 20 13:20:15 ts28 sr 2:0:0:0: Send: 0xffff8100defba840 
Jul 20 13:20:15 ts28 sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
Jul 20 13:20:15 ts28 buffer = 0x0000000000000000, bufflen = 0, done = 0xffffffff803856e5, queuecommand 0xffffffff8039758e
Jul 20 13:20:15 ts28 ata_scsi_dump_cdb: CDB (3:0,0,0) 00 00 00 00 00 00 00 00 00
Jul 20 13:20:15 ts28 ata_scsi_translate: ENTER
Jul 20 13:20:15 ts28 ata3: ata_dev_select: ENTER, device 0, wait 1
Jul 20 13:20:15 ts28 ata_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x20
Jul 20 13:20:15 ts28 ata_tf_load: device 0xA0
Jul 20 13:20:15 ts28 ata_exec_command: ata3: cmd 0xA0
Jul 20 13:20:15 ts28 ata_scsi_translate: EXIT
Jul 20 13:20:15 ts28 leaving scsi_dispatch_cmnd()
Jul 20 13:20:15 ts28 ata_hsm_move: ata3: protocol 6 task_state 1 (dev_stat 0x58)
Jul 20 13:20:15 ts28 atapi_send_cdb: send cdb
Jul 20 13:20:15 ts28 ata_host_intr: ata3: protocol 6 task_state 3
Jul 20 13:20:15 ts28 ata_hsm_move: ata3: protocol 6 task_state 3 (dev_stat 0x51)
Jul 20 13:20:15 ts28 ata_hsm_move: ata3: protocol 6 task_state 4 (dev_stat 0x51)
Jul 20 13:20:15 ts28 scsi_delete_timer: scmd: ffff8100defba840, rtn: 1
Jul 20 13:20:15 ts28 sr 2:0:0:0: Done: 0xffff8100defba840 TIMEOUT
Jul 20 13:20:15 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 20 13:20:15 ts28 sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
Jul 20 13:20:15 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 20 13:20:15 ts28 ata_scsi_timed_out: ENTER
Jul 20 13:20:15 ts28 ata_scsi_timed_out: EXIT, ret=0
Jul 20 13:20:15 ts28 Waking error handler thread
Jul 20 13:20:15 ts28 Error handler scsi_eh_2 waking up
Jul 20 13:20:15 ts28 ata_scsi_error: ENTER
Jul 20 13:20:15 ts28 ata_port_flush_task: ENTER
Jul 20 13:20:15 ts28 ata_port_flush_task: flush #1
Jul 20 13:20:15 ts28 ata3: ata_port_flush_task: flush #2
Jul 20 13:20:15 ts28 ata3: ata_port_flush_task: EXIT
Jul 20 13:20:15 ts28 ata_eh_autopsy: ENTER
Jul 20 13:20:15 ts28 atapi_eh_request_sense: ATAPI request sense
Jul 20 13:20:15 ts28 ata3: ata_dev_select: ENTER, device 0, wait 1
Jul 20 13:20:15 ts28 ata_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x20
Jul 20 13:20:15 ts28 ata_tf_load: device 0xA0
Jul 20 13:20:15 ts28 ata_exec_command: ata3: cmd 0xA0
Jul 20 13:20:15 ts28 ata_hsm_move: ata3: protocol 5 task_state 1 (dev_stat 0x58)
Jul 20 13:20:15 ts28 atapi_send_cdb: send cdb
Jul 20 13:20:15 ts28 ata_host_intr: ata3: protocol 5 task_state 2
Jul 20 13:20:15 ts28 ata_hsm_move: ata3: protocol 5 task_state 2 (dev_stat 0x58)
Jul 20 13:20:15 ts28 atapi_pio_bytes: ata3: xfering 18 bytes
Jul 20 13:20:15 ts28 __atapi_pio_bytes: data read
Jul 20 13:20:15 ts28 ata_host_intr: ata3: protocol 5 task_state 2
Jul 20 13:20:15 ts28 ata_hsm_move: ata3: protocol 5 task_state 2 (dev_stat 0x50)
Jul 20 13:20:15 ts28 ata_hsm_move: ata3: protocol 5 task_state 3 (dev_stat 0x50)
Jul 20 13:20:15 ts28 ata_hsm_move: ata3: dev 0 command complete, drv_stat 0x50
Jul 20 13:20:15 ts28 ata_port_flush_task: ENTER
Jul 20 13:20:15 ts28 ata_port_flush_task: flush #1
Jul 20 13:20:15 ts28 ata3: ata_port_flush_task: flush #2
Jul 20 13:20:15 ts28 ata3: ata_port_flush_task: EXIT
Jul 20 13:20:15 ts28 ata_eh_autopsy: EXIT
Jul 20 13:20:15 ts28 ata_eh_recover: ENTER
Jul 20 13:20:15 ts28 ata_eh_revalidate_and_attach: ENTER
Jul 20 13:20:15 ts28 ata_eh_recover: EXIT, rc=0
Jul 20 13:20:15 ts28 atapi_qc_complete: ENTER, err_mask 0x0
Jul 20 13:20:15 ts28 scsi_eh_2: flush finish cmd: ffff8100defba840
Jul 20 13:20:15 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 8000002)
Jul 20 13:20:15 ts28 0 sectors total, 0 bytes done.
Jul 20 13:20:15 ts28 use_sg is 0
Jul 20 13:20:15 ts28 ata_scsi_error: EXIT
Jul 20 13:20:15 ts28 scsi_restart_operations: waking up host to restart
Jul 20 13:20:15 ts28 Error handler scsi_eh_2 sleeping
Jul 20 13:20:15 ts28 scsi_block_when_processing_errors: rtn: 1
Jul 20 13:20:15 ts28 scsi_add_timer: scmd: ffff8100defba6c0, time: 30000, (ffffffff80382c14)
Jul 20 13:20:15 ts28 sr 2:0:0:0: Send: 0xffff8100defba6c0 
Jul 20 13:20:15 ts28 sr 2:0:0:0: CDB: Read TOC/PMA/ATIP: 43 00 00 00 00 00 00 00 0c 40
Jul 20 13:20:15 ts28 buffer = 0xffff810037e9a2c0, bufflen = 12, done = 0xffffffff803856e5, queuecommand 0xffffffff8039758e
Jul 20 13:20:15 ts28 ata_scsi_dump_cdb: CDB (3:0,0,0) 43 00 00 00 00 00 00 00 0c
Jul 20 13:20:15 ts28 ata_scsi_translate: ENTER
Jul 20 13:20:15 ts28 ata3: ata_dev_select: ENTER, device 0, wait 1
Jul 20 13:20:15 ts28 ata_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x20
Jul 20 13:20:15 ts28 ata_tf_load: device 0xA0
Jul 20 13:20:15 ts28 ata_exec_command: ata3: cmd 0xA0
Jul 20 13:20:15 ts28 ata_scsi_translate: EXIT
Jul 20 13:20:15 ts28 leaving scsi_dispatch_cmnd()
Jul 20 13:20:15 ts28 ata_hsm_move: ata3: protocol 5 task_state 1 (dev_stat 0x58)
Jul 20 13:20:15 ts28 atapi_send_cdb: send cdb
Jul 20 13:20:15 ts28 ata_host_intr: ata3: protocol 5 task_state 2
Jul 20 13:20:15 ts28 ata_hsm_move: ata3: protocol 5 task_state 2 (dev_stat 0x51)
Jul 20 13:20:15 ts28 ata_hsm_move: ata3: protocol 5 task_state 3 (dev_stat 0x51)
Jul 20 13:20:15 ts28 ata_hsm_move: ata3: protocol 5 task_state 4 (dev_stat 0x51)
Jul 20 13:20:16 ts28 scsi_delete_timer: scmd: ffff8100defba6c0, rtn: 1
Jul 20 13:20:16 ts28 sr 2:0:0:0: Done: 0xffff8100defba6c0 TIMEOUT
Jul 20 13:20:16 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 20 13:20:16 ts28 sr 2:0:0:0: CDB: Read TOC/PMA/ATIP: 43 00 00 00 00 00 00 00 0c 40
Jul 20 13:20:16 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 20 13:20:16 ts28 ata_scsi_timed_out: ENTER
Jul 20 13:20:16 ts28 ata_scsi_timed_out: EXIT, ret=0
Jul 20 13:20:16 ts28 Waking error handler thread
Jul 20 13:20:16 ts28 Error handler scsi_eh_2 waking up
Jul 20 13:20:16 ts28 ata_scsi_error: ENTER
Jul 20 13:20:16 ts28 ata_port_flush_task: ENTER
Jul 20 13:20:16 ts28 ata_port_flush_task: flush #1
Jul 20 13:20:16 ts28 ata3: ata_port_flush_task: flush #2
Jul 20 13:20:16 ts28 ata3: ata_port_flush_task: EXIT
Jul 20 13:20:16 ts28 ata_eh_autopsy: ENTER
Jul 20 13:20:16 ts28 atapi_eh_request_sense: ATAPI request sense
Jul 20 13:20:16 ts28 ata3: ata_dev_select: ENTER, device 0, wait 1
Jul 20 13:20:16 ts28 ata_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x20
Jul 20 13:20:16 ts28 ata_tf_load: device 0xA0
Jul 20 13:20:16 ts28 ata_exec_command: ata3: cmd 0xA0
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 1 (dev_stat 0x58)
Jul 20 13:20:16 ts28 atapi_send_cdb: send cdb
Jul 20 13:20:16 ts28 ata_host_intr: ata3: protocol 5 task_state 2
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 2 (dev_stat 0x58)
Jul 20 13:20:16 ts28 atapi_pio_bytes: ata3: xfering 18 bytes
Jul 20 13:20:16 ts28 __atapi_pio_bytes: data read
Jul 20 13:20:16 ts28 ata_host_intr: ata3: protocol 5 task_state 2
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 2 (dev_stat 0x50)
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 3 (dev_stat 0x50)
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: dev 0 command complete, drv_stat 0x50
Jul 20 13:20:16 ts28 ata_port_flush_task: ENTER
Jul 20 13:20:16 ts28 ata_port_flush_task: flush #1
Jul 20 13:20:16 ts28 ata3: ata_port_flush_task: flush #2
Jul 20 13:20:16 ts28 ata3: ata_port_flush_task: EXIT
Jul 20 13:20:16 ts28 ata_eh_autopsy: EXIT
Jul 20 13:20:16 ts28 ata_eh_recover: ENTER
Jul 20 13:20:16 ts28 ata_eh_revalidate_and_attach: ENTER
Jul 20 13:20:16 ts28 ata_eh_recover: EXIT, rc=0
Jul 20 13:20:16 ts28 atapi_qc_complete: ENTER, err_mask 0x0
Jul 20 13:20:16 ts28 scsi_eh_2: flush finish cmd: ffff8100defba6c0
Jul 20 13:20:16 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 8000002)
Jul 20 13:20:16 ts28 0 sectors total, 12 bytes done.
Jul 20 13:20:16 ts28 use_sg is 1
Jul 20 13:20:16 ts28 ata_scsi_error: EXIT
Jul 20 13:20:16 ts28 scsi_restart_operations: waking up host to restart
Jul 20 13:20:16 ts28 Error handler scsi_eh_2 sleeping
Jul 20 13:20:16 ts28 scsi_block_when_processing_errors: rtn: 1
Jul 20 13:20:16 ts28 scsi_add_timer: scmd: ffff8100defba9c0, time: 30000, (ffffffff80382c14)
Jul 20 13:20:16 ts28 sr 2:0:0:0: Send: 0xffff8100defba9c0 
Jul 20 13:20:16 ts28 sr 2:0:0:0: CDB: Read TOC/PMA/ATIP: 43 00 00 00 00 00 00 00 0c 00
Jul 20 13:20:16 ts28 buffer = 0xffff810037e9aac0, bufflen = 12, done = 0xffffffff803856e5, queuecommand 0xffffffff8039758e
Jul 20 13:20:16 ts28 ata_scsi_dump_cdb: CDB (3:0,0,0) 43 00 00 00 00 00 00 00 0c
Jul 20 13:20:16 ts28 ata_scsi_translate: ENTER
Jul 20 13:20:16 ts28 ata3: ata_dev_select: ENTER, device 0, wait 1
Jul 20 13:20:16 ts28 ata_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x20
Jul 20 13:20:16 ts28 ata_tf_load: device 0xA0
Jul 20 13:20:16 ts28 ata_exec_command: ata3: cmd 0xA0
Jul 20 13:20:16 ts28 ata_scsi_translate: EXIT
Jul 20 13:20:16 ts28 leaving scsi_dispatch_cmnd()
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 1 (dev_stat 0x58)
Jul 20 13:20:16 ts28 atapi_send_cdb: send cdb
Jul 20 13:20:16 ts28 ata_host_intr: ata3: protocol 5 task_state 2
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 2 (dev_stat 0x51)
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 3 (dev_stat 0x51)
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 4 (dev_stat 0x51)
Jul 20 13:20:16 ts28 scsi_delete_timer: scmd: ffff8100defba9c0, rtn: 1
Jul 20 13:20:16 ts28 sr 2:0:0:0: Done: 0xffff8100defba9c0 TIMEOUT
Jul 20 13:20:16 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 20 13:20:16 ts28 sr 2:0:0:0: CDB: Read TOC/PMA/ATIP: 43 00 00 00 00 00 00 00 0c 00
Jul 20 13:20:16 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 20 13:20:16 ts28 
Jul 20 13:20:16 ts28 ata_scsi_timed_out: ENTER
Jul 20 13:20:16 ts28 ata_scsi_timed_out: EXIT, ret=0
Jul 20 13:20:16 ts28 Waking error handler thread
Jul 20 13:20:16 ts28 Error handler scsi_eh_2 waking up
Jul 20 13:20:16 ts28 ata_scsi_error: ENTER
Jul 20 13:20:16 ts28 ata_port_flush_task: ENTER
Jul 20 13:20:16 ts28 ata_port_flush_task: flush #1
Jul 20 13:20:16 ts28 ata3: ata_port_flush_task: flush #2
Jul 20 13:20:16 ts28 ata3: ata_port_flush_task: EXIT
Jul 20 13:20:16 ts28 ata_eh_autopsy: ENTER
Jul 20 13:20:16 ts28 atapi_eh_request_sense: ATAPI request sense
Jul 20 13:20:16 ts28 
Jul 20 13:20:16 ts28 ata3: ata_dev_select: ENTER, device 0, wait 1
Jul 20 13:20:16 ts28 ata_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x20
Jul 20 13:20:16 ts28 ata_tf_load: device 0xA0
Jul 20 13:20:16 ts28 ata_exec_command: ata3: cmd 0xA0
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 1 (dev_stat 0x58)
Jul 20 13:20:16 ts28 atapi_send_cdb: send cdb
Jul 20 13:20:16 ts28 ata_host_intr: ata3: protocol 5 task_state 2
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 2 (dev_stat 0x58)
Jul 20 13:20:16 ts28 atapi_pio_bytes: ata3: xfering 18 bytes
Jul 20 13:20:16 ts28 __atapi_pio_bytes: data read
Jul 20 13:20:16 ts28 ata_host_intr: ata3: protocol 5 task_state 2
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 2 (dev_stat 0x50)
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 3 (dev_stat 0x50)
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: dev 0 command complete, drv_stat 0x50
Jul 20 13:20:16 ts28 ata_port_flush_task: ENTER
Jul 20 13:20:16 ts28 ata_port_flush_task: flush #1
Jul 20 13:20:16 ts28 ata3: ata_port_flush_task: flush #2
Jul 20 13:20:16 ts28 ata3: ata_port_flush_task: EXIT
Jul 20 13:20:16 ts28 ata_eh_autopsy: EXIT
Jul 20 13:20:16 ts28 
Jul 20 13:20:16 ts28 ata_eh_recover: ENTER
Jul 20 13:20:16 ts28 ata_eh_revalidate_and_attach: ENTER
Jul 20 13:20:16 ts28 ata_eh_recover: EXIT, rc=0
Jul 20 13:20:16 ts28 
Jul 20 13:20:16 ts28 atapi_qc_complete: ENTER, err_mask 0x0
Jul 20 13:20:16 ts28 
Jul 20 13:20:16 ts28 scsi_eh_2: flush finish cmd: ffff8100defba9c0
Jul 20 13:20:16 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 8000002)
Jul 20 13:20:16 ts28 0 sectors total, 12 bytes done.
Jul 20 13:20:16 ts28 use_sg is 1
Jul 20 13:20:16 ts28 ata_scsi_error: EXIT
Jul 20 13:20:16 ts28 scsi_restart_operations: waking up host to restart
Jul 20 13:20:16 ts28 scsi_add_timer: scmd: ffff8100defba540, time: 30000, (ffffffff80382c14)
Jul 20 13:20:16 ts28 sr 2:0:0:0: Send: 0xffff8100defba540 
Jul 20 13:20:16 ts28 sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
Jul 20 13:20:16 ts28 buffer = 0xffff810037e9adc0, bufflen = 8, done = 0xffffffff803856e5, queuecommand 0xffffffff8039758e
Jul 20 13:20:16 ts28 ata_scsi_dump_cdb: CDB (3:0,0,0) 25 00 00 00 00 00 00 00 00
Jul 20 13:20:16 ts28 ata_scsi_translate: ENTER
Jul 20 13:20:16 ts28 ata3: ata_dev_select: ENTER, device 0, wait 1
Jul 20 13:20:16 ts28 ata_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x20
Jul 20 13:20:16 ts28 ata_tf_load: device 0xA0
Jul 20 13:20:16 ts28 ata_exec_command: ata3: cmd 0xA0
Jul 20 13:20:16 ts28 ata_scsi_translate: EXIT
Jul 20 13:20:16 ts28 leaving scsi_dispatch_cmnd()
Jul 20 13:20:16 ts28 Error handler scsi_eh_2 sleeping
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 1 (dev_stat 0x58)
Jul 20 13:20:16 ts28 atapi_send_cdb: send cdb
Jul 20 13:20:16 ts28 ata_host_intr: ata3: protocol 5 task_state 2
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 2 (dev_stat 0x51)
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 3 (dev_stat 0x51)
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 4 (dev_stat 0x51)
Jul 20 13:20:16 ts28 scsi_delete_timer: scmd: ffff8100defba540, rtn: 1
Jul 20 13:20:16 ts28 sr 2:0:0:0: Done: 0xffff8100defba540 TIMEOUT
Jul 20 13:20:16 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 20 13:20:16 ts28 sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
Jul 20 13:20:16 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 20 13:20:16 ts28 ata_scsi_timed_out: ENTER
Jul 20 13:20:16 ts28 ata_scsi_timed_out: EXIT, ret=0
Jul 20 13:20:16 ts28 Waking error handler thread
Jul 20 13:20:16 ts28 Error handler scsi_eh_2 waking up
Jul 20 13:20:16 ts28 ata_scsi_error: ENTER
Jul 20 13:20:16 ts28 ata_port_flush_task: ENTER
Jul 20 13:20:16 ts28 ata_port_flush_task: flush #1
Jul 20 13:20:16 ts28 ata3: ata_port_flush_task: flush #2
Jul 20 13:20:16 ts28 ata3: ata_port_flush_task: EXIT
Jul 20 13:20:16 ts28 ata_eh_autopsy: ENTER
Jul 20 13:20:16 ts28 atapi_eh_request_sense: ATAPI request sense
Jul 20 13:20:16 ts28 ata3: ata_dev_select: ENTER, device 0, wait 1
Jul 20 13:20:16 ts28 ata_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x20
Jul 20 13:20:16 ts28 ata_tf_load: device 0xA0
Jul 20 13:20:16 ts28 ata_exec_command: ata3: cmd 0xA0
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 1 (dev_stat 0x58)
Jul 20 13:20:16 ts28 atapi_send_cdb: send cdb
Jul 20 13:20:16 ts28 ata_host_intr: ata3: protocol 5 task_state 2
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 2 (dev_stat 0x58)
Jul 20 13:20:16 ts28 atapi_pio_bytes: ata3: xfering 18 bytes
Jul 20 13:20:16 ts28 __atapi_pio_bytes: data read
Jul 20 13:20:16 ts28 ata_host_intr: ata3: protocol 5 task_state 2
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 2 (dev_stat 0x50)
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 3 (dev_stat 0x50)
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: dev 0 command complete, drv_stat 0x50
Jul 20 13:20:16 ts28 ata_port_flush_task: ENTER
Jul 20 13:20:16 ts28 ata_port_flush_task: flush #1
Jul 20 13:20:16 ts28 ata3: ata_port_flush_task: flush #2
Jul 20 13:20:16 ts28 ata3: ata_port_flush_task: EXIT
Jul 20 13:20:16 ts28 ata_eh_autopsy: EXIT
Jul 20 13:20:16 ts28 ata_eh_recover: ENTER
Jul 20 13:20:16 ts28 ata_eh_revalidate_and_attach: ENTER
Jul 20 13:20:16 ts28 ata_eh_recover: EXIT, rc=0
Jul 20 13:20:16 ts28 atapi_qc_complete: ENTER, err_mask 0x0
Jul 20 13:20:16 ts28 scsi_eh_2: flush finish cmd: ffff8100defba540
Jul 20 13:20:16 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 8000002)
Jul 20 13:20:16 ts28 0 sectors total, 8 bytes done.
Jul 20 13:20:16 ts28 use_sg is 1
Jul 20 13:20:16 ts28 ata_scsi_error: EXIT
Jul 20 13:20:16 ts28 scsi_restart_operations: waking up host to restart
Jul 20 13:20:16 ts28 scsi_add_timer: scmd: ffff8100de1093c0, time: 30000, (ffffffff80382c14)
Jul 20 13:20:16 ts28 
Jul 20 13:20:16 ts28 sr 2:0:0:0: Send: 0xffff8100de1093c0 
Jul 20 13:20:16 ts28 sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
Jul 20 13:20:16 ts28 buffer = 0xffff810037e9a1c0, bufflen = 8, done = 0xffffffff803856e5, queuecommand 0xffffffff8039758e
Jul 20 13:20:16 ts28 ata_scsi_dump_cdb: CDB (3:0,0,0) 25 00 00 00 00 00 00 00 00
Jul 20 13:20:16 ts28 ata_scsi_translate: ENTER
Jul 20 13:20:16 ts28 ata3: ata_dev_select: ENTER, device 0, wait 1
Jul 20 13:20:16 ts28 ata_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x20
Jul 20 13:20:16 ts28 ata_tf_load: device 0xA0
Jul 20 13:20:16 ts28 ata_exec_command: ata3: cmd 0xA0
Jul 20 13:20:16 ts28 ata_scsi_translate: EXIT
Jul 20 13:20:16 ts28 leaving scsi_dispatch_cmnd()
Jul 20 13:20:16 ts28 Error handler scsi_eh_2 sleeping
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 1 (dev_stat 0x58)
Jul 20 13:20:16 ts28 atapi_send_cdb: send cdb
Jul 20 13:20:16 ts28 ata_host_intr: ata3: protocol 5 task_state 2
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 2 (dev_stat 0x51)
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 3 (dev_stat 0x51)
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 4 (dev_stat 0x51)
Jul 20 13:20:16 ts28 scsi_delete_timer: scmd: ffff8100de1093c0, rtn: 1
Jul 20 13:20:16 ts28 sr 2:0:0:0: Done: 0xffff8100de1093c0 TIMEOUT
Jul 20 13:20:16 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 20 13:20:16 ts28 sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
Jul 20 13:20:16 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 20 13:20:16 ts28 ata_scsi_timed_out: ENTER
Jul 20 13:20:16 ts28 ata_scsi_timed_out: EXIT, ret=0
Jul 20 13:20:16 ts28 Waking error handler thread
Jul 20 13:20:16 ts28 Error handler scsi_eh_2 waking up
Jul 20 13:20:16 ts28 ata_scsi_error: ENTER
Jul 20 13:20:16 ts28 ata_port_flush_task: ENTER
Jul 20 13:20:16 ts28 ata_port_flush_task: flush #1
Jul 20 13:20:16 ts28 ata3: ata_port_flush_task: flush #2
Jul 20 13:20:16 ts28 ata3: ata_port_flush_task: EXIT
Jul 20 13:20:16 ts28 ata_eh_autopsy: ENTER
Jul 20 13:20:16 ts28 atapi_eh_request_sense: ATAPI request sense
Jul 20 13:20:16 ts28 ata3: ata_dev_select: ENTER, device 0, wait 1
Jul 20 13:20:16 ts28 ata_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x20
Jul 20 13:20:16 ts28 ata_tf_load: device 0xA0
Jul 20 13:20:16 ts28 ata_exec_command: ata3: cmd 0xA0
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 1 (dev_stat 0x58)
Jul 20 13:20:16 ts28 atapi_send_cdb: send cdb
Jul 20 13:20:16 ts28 ata_host_intr: ata3: protocol 5 task_state 2
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 2 (dev_stat 0x58)
Jul 20 13:20:16 ts28 atapi_pio_bytes: ata3: xfering 18 bytes
Jul 20 13:20:16 ts28 __atapi_pio_bytes: data read
Jul 20 13:20:16 ts28 ata_host_intr: ata3: protocol 5 task_state 2
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 2 (dev_stat 0x50)
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 3 (dev_stat 0x50)
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: dev 0 command complete, drv_stat 0x50
Jul 20 13:20:16 ts28 ata_port_flush_task: ENTER
Jul 20 13:20:16 ts28 
Jul 20 13:20:16 ts28 ata_port_flush_task: flush #1
Jul 20 13:20:16 ts28 ata3: ata_port_flush_task: flush #2
Jul 20 13:20:16 ts28 ata3: ata_port_flush_task: EXIT
Jul 20 13:20:16 ts28 ata_eh_autopsy: EXIT
Jul 20 13:20:16 ts28 ata_eh_recover: ENTER
Jul 20 13:20:16 ts28 ata_eh_revalidate_and_attach: ENTER
Jul 20 13:20:16 ts28 ata_eh_recover: EXIT, rc=0
Jul 20 13:20:16 ts28 atapi_qc_complete: ENTER, err_mask 0x0
Jul 20 13:20:16 ts28 scsi_eh_2: flush finish cmd: ffff8100de1093c0
Jul 20 13:20:16 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 8000002)
Jul 20 13:20:16 ts28 0 sectors total, 8 bytes done.
Jul 20 13:20:16 ts28 use_sg is 1
Jul 20 13:20:16 ts28 ata_scsi_error: EXIT
Jul 20 13:20:16 ts28 scsi_restart_operations: waking up host to restart
Jul 20 13:20:16 ts28 scsi_add_timer: scmd: ffff8100defba540, time: 30000, (ffffffff80382c14)
Jul 20 13:20:16 ts28 sr 2:0:0:0: Send: 0xffff8100defba540 
Jul 20 13:20:16 ts28 sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
Jul 20 13:20:16 ts28 buffer = 0xffff810037e9adc0, bufflen = 8, done = 0xffffffff803856e5, queuecommand 0xffffffff8039758e
Jul 20 13:20:16 ts28 ata_scsi_dump_cdb: CDB (3:0,0,0) 25 00 00 00 00 00 00 00 00
Jul 20 13:20:16 ts28 ata_scsi_translate: ENTER
Jul 20 13:20:16 ts28 ata3: ata_dev_select: ENTER, device 0, wait 1
Jul 20 13:20:16 ts28 ata_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x20
Jul 20 13:20:16 ts28 ata_tf_load: device 0xA0
Jul 20 13:20:16 ts28 ata_exec_command: ata3: cmd 0xA0
Jul 20 13:20:16 ts28 ata_scsi_translate: EXIT
Jul 20 13:20:16 ts28 leaving scsi_dispatch_cmnd()
Jul 20 13:20:16 ts28 Error handler scsi_eh_2 sleeping
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 1 (dev_stat 0x58)
Jul 20 13:20:16 ts28 atapi_send_cdb: send cdb
Jul 20 13:20:16 ts28 ata_host_intr: ata3: protocol 5 task_state 2
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 2 (dev_stat 0x51)
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 3 (dev_stat 0x51)
Jul 20 13:20:16 ts28 ata_hsm_move: ata3: protocol 5 task_state 4 (dev_stat 0x51)
Jul 20 13:20:17 ts28 scsi_delete_timer: scmd: ffff8100defba540, rtn: 1
Jul 20 13:20:17 ts28 sr 2:0:0:0: Done: 0xffff8100defba540 TIMEOUT
Jul 20 13:20:17 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 20 13:20:17 ts28 sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
Jul 20 13:20:17 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 20 13:20:17 ts28 ata_scsi_timed_out: ENTER
Jul 20 13:20:17 ts28 ata_scsi_timed_out: EXIT, ret=0
Jul 20 13:20:17 ts28 Waking error handler thread
Jul 20 13:20:17 ts28 Error handler scsi_eh_2 waking up
Jul 20 13:20:17 ts28 ata_scsi_error: ENTER
Jul 20 13:20:17 ts28 ata_port_flush_task: ENTER
Jul 20 13:20:17 ts28 ata_port_flush_task: flush #1
Jul 20 13:20:17 ts28 ata3: ata_port_flush_task: flush #2
Jul 20 13:20:17 ts28 ata3: ata_port_flush_task: EXIT
Jul 20 13:20:17 ts28 ata_eh_autopsy: ENTER
Jul 20 13:20:17 ts28 atapi_eh_request_sense: ATAPI request sense
Jul 20 13:20:17 ts28 ata3: ata_dev_select: ENTER, device 0, wait 1
Jul 20 13:20:17 ts28 ata_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x20
Jul 20 13:20:17 ts28 ata_tf_load: device 0xA0
Jul 20 13:20:17 ts28 ata_exec_command: ata3: cmd 0xA0
Jul 20 13:20:17 ts28 ata_hsm_move: ata3: protocol 5 task_state 1 (dev_stat 0x58)
Jul 20 13:20:17 ts28 atapi_send_cdb: send cdb
Jul 20 13:20:17 ts28 ata_host_intr: ata3: protocol 5 task_state 2
Jul 20 13:20:17 ts28 ata_hsm_move: ata3: protocol 5 task_state 2 (dev_stat 0x58)
Jul 20 13:20:17 ts28 atapi_pio_bytes: ata3: xfering 18 bytes
Jul 20 13:20:17 ts28 __atapi_pio_bytes: data read
Jul 20 13:20:17 ts28 ata_host_intr: ata3: protocol 5 task_state 2
Jul 20 13:20:17 ts28 ata_hsm_move: ata3: protocol 5 task_state 2 (dev_stat 0x50)
Jul 20 13:20:17 ts28 ata_hsm_move: ata3: protocol 5 task_state 3 (dev_stat 0x50)
Jul 20 13:20:17 ts28 ata_hsm_move: ata3: dev 0 command complete, drv_stat 0x50
Jul 20 13:20:17 ts28 ata_port_flush_task: ENTER
Jul 20 13:20:17 ts28 ata_port_flush_task: flush #1
Jul 20 13:20:17 ts28 ata3: ata_port_flush_task: flush #2
Jul 20 13:20:17 ts28 ata3: ata_port_flush_task: EXIT
Jul 20 13:20:17 ts28 ata_eh_autopsy: EXIT
Jul 20 13:20:17 ts28 ata_eh_recover: ENTER
Jul 20 13:20:17 ts28 ata_eh_revalidate_and_attach: ENTER
Jul 20 13:20:17 ts28 ata_eh_recover: EXIT, rc=0
Jul 20 13:20:17 ts28 
Jul 20 13:20:17 ts28 atapi_qc_complete: ENTER, err_mask 0x0
Jul 20 13:20:17 ts28 scsi_eh_2: flush finish cmd: ffff8100defba540
Jul 20 13:20:17 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 8000002)
Jul 20 13:20:17 ts28 0 sectors total, 8 bytes done.
Jul 20 13:20:17 ts28 use_sg is 1
Jul 20 13:20:17 ts28 ata_scsi_error: EXIT
Jul 20 13:20:17 ts28 cdrom: entering CDROM_DRIVE_STATUS
Jul 20 13:20:17 ts28 scsi_restart_operations: waking up host to restart
Jul 20 13:20:17 ts28 Error handler scsi_eh_2 sleeping
Jul 20 13:20:17 ts28 scsi_block_when_processing_errors: rtn: 1
Jul 20 13:20:17 ts28 scsi_add_timer: scmd: ffff8100defba9c0, time: 30000, (ffffffff80382c14)
Jul 20 13:20:17 ts28 sr 2:0:0:0: Send: 0xffff8100defba9c0 
Jul 20 13:20:17 ts28 sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
Jul 20 13:20:17 ts28 buffer = 0x0000000000000000, bufflen = 0, done = 0xffffffff803856e5, queuecommand 0xffffffff8039758e
Jul 20 13:20:17 ts28 ata_scsi_dump_cdb: CDB (3:0,0,0) 00 00 00 00 00 00 00 00 00
Jul 20 13:20:17 ts28 ata_scsi_translate: ENTER
Jul 20 13:20:17 ts28 ata3: ata_dev_select: ENTER, device 0, wait 1
Jul 20 13:20:17 ts28 ata_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x20
Jul 20 13:20:17 ts28 ata_tf_load: device 0xA0
Jul 20 13:20:17 ts28 ata_exec_command: ata3: cmd 0xA0
Jul 20 13:20:17 ts28 ata_scsi_translate: EXIT
Jul 20 13:20:17 ts28 leaving scsi_dispatch_cmnd()
Jul 20 13:20:17 ts28 ata_hsm_move: ata3: protocol 6 task_state 1 (dev_stat 0x58)
Jul 20 13:20:17 ts28 atapi_send_cdb: send cdb
Jul 20 13:20:17 ts28 ata_host_intr: ata3: protocol 6 task_state 3
Jul 20 13:20:17 ts28 ata_hsm_move: ata3: protocol 6 task_state 3 (dev_stat 0x51)
Jul 20 13:20:17 ts28 ata_hsm_move: ata3: protocol 6 task_state 4 (dev_stat 0x51)
Jul 20 13:20:17 ts28 scsi_delete_timer: scmd: ffff8100defba9c0, rtn: 1
Jul 20 13:20:17 ts28 sr 2:0:0:0: Done: 0xffff8100defba9c0 TIMEOUT
Jul 20 13:20:17 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 20 13:20:17 ts28 sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
Jul 20 13:20:17 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 20 13:20:17 ts28 ata_scsi_timed_out: ENTER
Jul 20 13:20:17 ts28 ata_scsi_timed_out: EXIT, ret=0
Jul 20 13:20:17 ts28 Waking error handler thread
Jul 20 13:20:17 ts28 Error handler scsi_eh_2 waking up
Jul 20 13:20:17 ts28 ata_scsi_error: ENTER
Jul 20 13:20:17 ts28 ata_port_flush_task: ENTER
Jul 20 13:20:17 ts28 ata_port_flush_task: flush #1
Jul 20 13:20:17 ts28 ata3: ata_port_flush_task: flush #2
Jul 20 13:20:17 ts28 ata3: ata_port_flush_task: EXIT
Jul 20 13:20:17 ts28 ata_eh_autopsy: ENTER
Jul 20 13:20:17 ts28 atapi_eh_request_sense: ATAPI request sense
Jul 20 13:20:17 ts28 ata3: ata_dev_select: ENTER, device 0, wait 1
Jul 20 13:20:17 ts28 ata_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x20
Jul 20 13:20:17 ts28 ata_tf_load: device 0xA0
Jul 20 13:20:17 ts28 ata_exec_command: ata3: cmd 0xA0
Jul 20 13:20:17 ts28 ata_hsm_move: ata3: protocol 5 task_state 1 (dev_stat 0x58)
Jul 20 13:20:17 ts28 atapi_send_cdb: send cdb
Jul 20 13:20:17 ts28 ata_host_intr: ata3: protocol 5 task_state 2
Jul 20 13:20:17 ts28 ata_hsm_move: ata3: protocol 5 task_state 2 (dev_stat 0x58)
Jul 20 13:20:17 ts28 atapi_pio_bytes: ata3: xfering 18 bytes
Jul 20 13:20:17 ts28 __atapi_pio_bytes: data read
Jul 20 13:20:17 ts28 ata_host_intr: ata3: protocol 5 task_state 2
Jul 20 13:20:17 ts28 ata_hsm_move: ata3: protocol 5 task_state 2 (dev_stat 0x50)
Jul 20 13:20:17 ts28 ata_hsm_move: ata3: protocol 5 task_state 3 (dev_stat 0x50)
Jul 20 13:20:17 ts28 ata_hsm_move: ata3: dev 0 command complete, drv_stat 0x50
Jul 20 13:20:17 ts28 ata_port_flush_task: ENTER
Jul 20 13:20:17 ts28 ata_port_flush_task: flush #1
Jul 20 13:20:17 ts28 ata3: ata_port_flush_task: flush #2
Jul 20 13:20:17 ts28 ata3: ata_port_flush_task: EXIT
Jul 20 13:20:17 ts28 ata_eh_autopsy: EXIT
Jul 20 13:20:17 ts28 ata_eh_recover: ENTER
Jul 20 13:20:17 ts28 ata_eh_revalidate_and_attach: ENTER
Jul 20 13:20:17 ts28 ata_eh_recover: EXIT, rc=0
Jul 20 13:20:17 ts28 atapi_qc_complete: ENTER, err_mask 0x0
Jul 20 13:20:17 ts28 scsi_eh_2: flush finish cmd: ffff8100defba9c0
Jul 20 13:20:17 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 8000002)
Jul 20 13:20:17 ts28 0 sectors total, 0 bytes done.
Jul 20 13:20:17 ts28 use_sg is 0
Jul 20 13:20:17 ts28 ata_scsi_error: EXIT
Jul 20 13:20:17 ts28 cdrom: entering cdrom_release
Jul 20 13:20:17 ts28 cdrom: Use count for "/dev/sr0" now zero
Jul 20 13:20:17 ts28 cdrom: sr0: No DVD+RW
Jul 20 13:20:17 ts28 cdrom: Unlocking door!
Jul 20 13:20:17 ts28 
Jul 20 13:20:17 ts28 Trying ioctl with scsi command 30
Jul 20 13:20:17 ts28 scsi_restart_operations: waking up host to restart
Jul 20 13:20:17 ts28 scsi_add_timer: scmd: ffff8100defba840, time: 10000, (ffffffff80382c14)
Jul 20 13:20:17 ts28 sr 2:0:0:0: Send: 0xffff8100defba840 
Jul 20 13:20:17 ts28 sr 2:0:0:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00 00
Jul 20 13:20:17 ts28 buffer = 0x0000000000000000, bufflen = 0, done = 0xffffffff803856e5, queuecommand 0xffffffff8039758e
Jul 20 13:20:17 ts28 ata_scsi_dump_cdb: CDB (3:0,0,0) 1e 00 00 00 00 00 00 00 00
Jul 20 13:20:17 ts28 ata_scsi_translate: ENTER
Jul 20 13:20:17 ts28 ata3: ata_dev_select: ENTER, device 0, wait 1
Jul 20 13:20:17 ts28 ata_tf_load: feat 0x0 nsect 0x0 lba 0x0 0x0 0x20
Jul 20 13:20:17 ts28 ata_tf_load: device 0xA0
Jul 20 13:20:17 ts28 ata_exec_command: ata3: cmd 0xA0
Jul 20 13:20:17 ts28 ata_scsi_translate: EXIT
Jul 20 13:20:17 ts28 leaving scsi_dispatch_cmnd()
Jul 20 13:20:17 ts28 Error handler scsi_eh_2 sleeping
Jul 20 13:20:17 ts28 ata_hsm_move: ata3: protocol 6 task_state 1 (dev_stat 0x58)
Jul 20 13:20:17 ts28 atapi_send_cdb: send cdb
Jul 20 13:20:17 ts28 
Jul 20 13:20:17 ts28 ata_host_intr: ata3: protocol 6 task_state 3
Jul 20 13:20:17 ts28 ata_hsm_move: ata3: protocol 6 task_state 3 (dev_stat 0x50)
Jul 20 13:20:17 ts28 ata_hsm_move: ata3: dev 0 command complete, drv_stat 0x50
Jul 20 13:20:17 ts28 atapi_qc_complete: ENTER, err_mask 0x0
Jul 20 13:20:17 ts28 scsi_delete_timer: scmd: ffff8100defba840, rtn: 1
Jul 20 13:20:17 ts28 sr 2:0:0:0: Done: 0xffff8100defba840 SUCCESS
Jul 20 13:20:17 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 20 13:20:17 ts28 sr 2:0:0:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00 00
Jul 20 13:20:17 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 20 13:20:17 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 0)
Jul 20 13:20:17 ts28 0 sectors total, 0 bytes done.
Jul 20 13:20:17 ts28 use_sg is 0
Jul 20 13:20:17 ts28 Ioctl returned  0x0
Jul 20 13:20:17 ts28 IOCTL Releasing command