Jul 24 13:39:01 ts28 Linux version 2.6.22 (vvs@vvs.work.ve) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #4 SMP Thu Jul 12 07:58:27 MSD 2007
Jul 24 13:39:01 ts28 Command line: ro root=LABEL=/1 console=ttyS0,115200 console=tty debug silencelevel=8 crashkernel=128M@128M acpc=noirq
Jul 24 13:39:01 ts28 BIOS-provided physical RAM map:
Jul 24 13:39:01 ts28  BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
Jul 24 13:39:01 ts28  BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
Jul 24 13:39:01 ts28  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jul 24 13:39:01 ts28  BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
Jul 24 13:39:01 ts28  BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS)
Jul 24 13:39:01 ts28  BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
Jul 24 13:39:01 ts28  BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
Jul 24 13:39:01 ts28  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Jul 24 13:39:01 ts28 Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Jul 24 13:39:01 ts28 Entering add_active_range(0, 256, 917216) 1 entries of 3200 used
Jul 24 13:39:01 ts28 end_pfn_map = 1048576
Jul 24 13:39:01 ts28 DMI 2.3 present.
Jul 24 13:39:01 ts28 ACPI: RSDP 000F6980, 0014 (r0 VIAK8 )
Jul 24 13:39:01 ts28 ACPI: RSDT DFEE3000, 002C (r1 VIAK8  AWRDACPI 42302E31 AWRD        0)
Jul 24 13:39:01 ts28 ACPI: FACP DFEE3040, 0074 (r1 VIAK8  AWRDACPI 42302E31 AWRD        0)
Jul 24 13:39:01 ts28 ACPI: DSDT DFEE30C0, 4A4C (r1 VIAK8  AWRDACPI     1000 MSFT  100000E)
Jul 24 13:39:01 ts28 ACPI: FACS DFEE0000, 0040
Jul 24 13:39:01 ts28 ACPI: APIC DFEE7B40, 0068 (r1 VIAK8  AWRDACPI 42302E31 AWRD        0)
Jul 24 13:39:01 ts28 Scanning NUMA topology in Northbridge 24
Jul 24 13:39:01 ts28 Number of nodes 2
Jul 24 13:39:01 ts28 Node 0 MemBase 0000000000000000 Limit 00000000dfee0000
Jul 24 13:39:01 ts28 Entering add_active_range(0, 0, 157) 0 entries of 3200 used
Jul 24 13:39:01 ts28 Entering add_active_range(0, 256, 917216) 1 entries of 3200 used
Jul 24 13:39:01 ts28 Skipping disabled node 1
Jul 24 13:39:01 ts28 NUMA: Using 63 for the hash shift.
Jul 24 13:39:01 ts28 Using node hash shift of 63
Jul 24 13:39:01 ts28 Bootmem setup node 0 0000000000000000-00000000dfee0000
Jul 24 13:39:01 ts28 Zone PFN ranges:
Jul 24 13:39:01 ts28   DMA             0 ->     4096
Jul 24 13:39:01 ts28   DMA32        4096 ->  1048576
Jul 24 13:39:01 ts28   Normal    1048576 ->  1048576
Jul 24 13:39:01 ts28 early_node_map[2] active PFN ranges
Jul 24 13:39:01 ts28     0:        0 ->      157
Jul 24 13:39:01 ts28     0:      256 ->   917216
Jul 24 13:39:01 ts28 On node 0 totalpages: 917117
Jul 24 13:39:01 ts28   DMA zone: 56 pages used for memmap
Jul 24 13:39:01 ts28   DMA zone: 2018 pages reserved
Jul 24 13:39:01 ts28   DMA zone: 1923 pages, LIFO batch:0
Jul 24 13:39:01 ts28   DMA32 zone: 12484 pages used for memmap
Jul 24 13:39:01 ts28 
Jul 24 13:39:01 ts28   DMA32 zone: 900636 pages, LIFO batch:31
Jul 24 13:39:01 ts28   Normal zone: 0 pages used for memmap
Jul 24 13:39:01 ts28 ACPI: PM-Timer IO Port: 0x4008
Jul 24 13:39:01 ts28 ACPI: Local APIC address 0xfee00000
Jul 24 13:39:01 ts28 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jul 24 13:39:01 ts28 Processor #0 (Bootup-CPU)
Jul 24 13:39:01 ts28 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Jul 24 13:39:01 ts28 Processor #1
Jul 24 13:39:01 ts28 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Jul 24 13:39:01 ts28 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Jul 24 13:39:01 ts28 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Jul 24 13:39:01 ts28 IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
Jul 24 13:39:01 ts28 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jul 24 13:39:01 ts28 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Jul 24 13:39:01 ts28 ACPI: IRQ0 used by override.
Jul 24 13:39:01 ts28 ACPI: IRQ2 used by override.
Jul 24 13:39:01 ts28 ACPI: IRQ9 used by override.
Jul 24 13:39:01 ts28 Setting APIC routing to flat
Jul 24 13:39:01 ts28 Using ACPI (MADT) for SMP configuration information
Jul 24 13:39:01 ts28 Allocating PCI resources starting at e0000000 (gap: dff00000:1ed00000)
Jul 24 13:39:01 ts28 PERCPU: Allocating 68072 bytes of per cpu data
Jul 24 13:39:01 ts28 Built 1 zonelists.  Total pages: 902559
Jul 24 13:39:01 ts28 Kernel command line: ro root=LABEL=/1 console=ttyS0,115200 console=tty debug silencelevel=8 crashkernel=128M@128M acpc=noirq
Jul 24 13:39:01 ts28 Initializing CPU#0
Jul 24 13:39:01 ts28 PID hash table entries: 4096 (order: 12, 32768 bytes)
Jul 24 13:39:01 ts28 Marking TSC unstable due to TSCs unsynchronized
Jul 24 13:39:01 ts28 time.c: Detected 2004.613 MHz processor.
Jul 24 13:39:01 ts28 Console: colour VGA+ 80x25
Jul 24 13:39:01 ts28 Checking aperture...
Jul 24 13:39:01 ts28 CPU 0: aperture @ e8000000 size 128 MB
Jul 24 13:39:01 ts28 CPU 1: aperture @ e8000000 size 128 MB
Jul 24 13:39:01 ts28 Memory: 3477240k/3668864k available (2449k kernel code, 191228k reserved, 1418k data, 296k init)
Jul 24 13:39:01 ts28 Calibrating delay using timer specific routine.. 4012.11 BogoMIPS (lpj=2006056)
Jul 24 13:39:01 ts28 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Jul 24 13:39:01 ts28 Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Jul 24 13:39:01 ts28 Mount-cache hash table entries: 256
Jul 24 13:39:01 ts28 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Jul 24 13:39:01 ts28 CPU: L2 Cache: 1024K (64 bytes/line)
Jul 24 13:39:01 ts28 CPU 0/0 -> Node 0
Jul 24 13:39:01 ts28 Freeing SMP alternatives: 27k freed
Jul 24 13:39:01 ts28 ACPI: Core revision 20070126
Jul 24 13:39:01 ts28 Using local APIC timer interrupts.
Jul 24 13:39:01 ts28 result 12528848
Jul 24 13:39:01 ts28 Detected 12.528 MHz APIC timer.
Jul 24 13:39:01 ts28 Booting processor 1/2 APIC 0x1
Jul 24 13:39:01 ts28 Initializing CPU#1
Jul 24 13:39:01 ts28 Calibrating delay using timer specific routine.. 4008.43 BogoMIPS (lpj=2004219)
Jul 24 13:39:01 ts28 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Jul 24 13:39:01 ts28 CPU: L2 Cache: 1024K (64 bytes/line)
Jul 24 13:39:01 ts28 CPU 1/1 -> Node 0
Jul 24 13:39:01 ts28 AMD Opteron(tm) Processor 246 stepping 0a
Jul 24 13:39:01 ts28 Brought up 2 CPUs
Jul 24 13:39:01 ts28 migration_cost=417
Jul 24 13:39:01 ts28 NET: Registered protocol family 16
Jul 24 13:39:01 ts28 No dock devices found.
Jul 24 13:39:01 ts28 ACPI: bus type pci registered
Jul 24 13:39:01 ts28 PCI: Using configuration type 1
Jul 24 13:39:01 ts28 ACPI: Interpreter enabled
Jul 24 13:39:01 ts28 ACPI: Using IOAPIC for interrupt routing
Jul 24 13:39:01 ts28 ACPI: PCI Root Bridge [PCI0] (0000:00)
Jul 24 13:39:01 ts28 PCI: Probing PCI hardware (bus 00)
Jul 24 13:39:01 ts28 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jul 24 13:39:01 ts28 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
Jul 24 13:39:01 ts28 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
Jul 24 13:39:01 ts28 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
Jul 24 13:39:01 ts28 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jul 24 13:39:01 ts28 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jul 24 13:39:01 ts28 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jul 24 13:39:01 ts28 ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jul 24 13:39:01 ts28 ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jul 24 13:39:01 ts28 ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
Jul 24 13:39:01 ts28 ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
Jul 24 13:39:01 ts28 ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
Jul 24 13:39:01 ts28 ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
Jul 24 13:39:01 ts28 
Jul 24 13:39:01 ts28 Linux Plug and Play Support v0.97 (c) Adam Belay
Jul 24 13:39:01 ts28 pnp: PnP ACPI init
Jul 24 13:39:01 ts28 ACPI: bus type pnp registered
Jul 24 13:39:01 ts28 pnp: PnP ACPI: found 14 devices
Jul 24 13:39:01 ts28 ACPI: ACPI bus type pnp unregistered
Jul 24 13:39:01 ts28 SCSI subsystem initialized
Jul 24 13:39:01 ts28 libata version 2.21 loaded.
Jul 24 13:39:01 ts28 usbcore: registered new interface driver usbfs
Jul 24 13:39:01 ts28 usbcore: registered new interface driver hub
Jul 24 13:39:01 ts28 usbcore: registered new device driver usb
Jul 24 13:39:01 ts28 PCI: Using ACPI for IRQ routing
Jul 24 13:39:01 ts28 PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Jul 24 13:39:01 ts28 PCI: Cannot allocate resource region 0 of device 0000:00:00.0
Jul 24 13:39:01 ts28 agpgart: Detected AGP bridge 0
Jul 24 13:39:01 ts28 agpgart: AGP aperture is 128M @ 0xe8000000
Jul 24 13:39:01 ts28 pnp: 00:00: iomem range 0xd6000-0xd7fff has been reserved
Jul 24 13:39:01 ts28 pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
Jul 24 13:39:01 ts28 pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
Jul 24 13:39:02 ts28 pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
Jul 24 13:39:02 ts28 pnp: 00:02: ioport range 0x4000-0x407f has been reserved
Jul 24 13:39:02 ts28 pnp: 00:02: ioport range 0x5000-0x500f has been reserved
Jul 24 13:39:02 ts28 PCI: Bridge: 0000:00:01.0
Jul 24 13:39:02 ts28   IO window: disabled.
Jul 24 13:39:02 ts28   MEM window: f8000000-f9ffffff
Jul 24 13:39:02 ts28 Time: acpi_pm clocksource has been installed.
Jul 24 13:39:02 ts28   PREFETCH window: f0000000-f7ffffff
Jul 24 13:39:02 ts28 PCI: Setting latency timer of device 0000:00:01.0 to 64
Jul 24 13:39:02 ts28 NET: Registered protocol family 2
Jul 24 13:39:02 ts28 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Jul 24 13:39:02 ts28 TCP established hash table entries: 524288 (order: 11, 12582912 bytes)
Jul 24 13:39:02 ts28 TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Jul 24 13:39:02 ts28 TCP: Hash tables configured (established 524288 bind 65536)
Jul 24 13:39:02 ts28 TCP reno registered
Jul 24 13:39:02 ts28 checking if image is initramfs... it is
Jul 24 13:39:02 ts28 Freeing initrd memory: 1447k freed
Jul 24 13:39:02 ts28 audit: initializing netlink socket (disabled)
Jul 24 13:39:02 ts28 audit(1185269885.320:1): initialized
Jul 24 13:39:02 ts28 Total HugeTLB memory allocated, 0
Jul 24 13:39:02 ts28 VFS: Disk quotas dquot_6.5.1
Jul 24 13:39:02 ts28 Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jul 24 13:39:02 ts28 io scheduler noop registered
Jul 24 13:39:02 ts28 io scheduler anticipatory registered
Jul 24 13:39:02 ts28 io scheduler deadline registered
Jul 24 13:39:02 ts28 io scheduler cfq registered (default)
Jul 24 13:39:02 ts28 PCI: VIA PCI bridge detected. Disabling DAC.
Jul 24 13:39:02 ts28 Boot video device is 0000:01:00.0
Jul 24 13:39:02 ts28 pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jul 24 13:39:02 ts28 ACPI: Fan [FAN] (on)
Jul 24 13:39:02 ts28 ACPI: Thermal Zone [THRM] (40 C)
Jul 24 13:39:02 ts28 Real Time Clock Driver v1.12ac
Jul 24 13:39:02 ts28 Non-volatile memory driver v1.2
Jul 24 13:39:02 ts28 Linux agpgart interface v0.102 (c) Dave Jones
Jul 24 13:39:02 ts28 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Jul 24 13:39:02 ts28 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jul 24 13:39:02 ts28 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jul 24 13:39:02 ts28 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Jul 24 13:39:02 ts28 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jul 24 13:39:02 ts28 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jul 24 13:39:02 ts28 ide-floppy driver 0.99.newide
Jul 24 13:39:02 ts28 sata_via 0000:00:0f.0: version 2.2
Jul 24 13:39:02 ts28 ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
Jul 24 13:39:02 ts28 ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
Jul 24 13:39:02 ts28 ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
Jul 24 13:39:02 ts28 sata_via 0000:00:0f.0: routed to hard irq line 11
Jul 24 13:39:02 ts28 scsi0 : sata_via
Jul 24 13:39:02 ts28 scsi1 : sata_via
Jul 24 13:39:02 ts28 ata1: SATA max UDMA/133 cmd 0x000000000001c000 ctl 0x000000000001c402 bmdma 0x000000000001d000 irq 20
Jul 24 13:39:02 ts28 ata2: SATA max UDMA/133 cmd 0x000000000001c800 ctl 0x000000000001cc02 bmdma 0x000000000001d008 irq 20
Jul 24 13:39:02 ts28 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jul 24 13:39:02 ts28 ata1.00: ATA-7: ST380811AS, 3.AAE, max UDMA/133
Jul 24 13:39:02 ts28 ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
Jul 24 13:39:02 ts28 ata1.00: configured for UDMA/133
Jul 24 13:39:02 ts28 ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Jul 24 13:39:02 ts28 scsi 0:0:0:0: Direct-Access     ATA      ST380811AS       3.AA PQ: 0 ANSI: 5
Jul 24 13:39:02 ts28 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
Jul 24 13:39:02 ts28 sd 0:0:0:0: [sda] Write Protect is off
Jul 24 13:39:02 ts28 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jul 24 13:39:02 ts28 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jul 24 13:39:02 ts28 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
Jul 24 13:39:02 ts28 sd 0:0:0:0: [sda] Write Protect is off
Jul 24 13:39:02 ts28 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jul 24 13:39:02 ts28 
Jul 24 13:39:02 ts28 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jul 24 13:39:02 ts28  sda: sda1 sda2 sda3 sda4 < sda5 >
Jul 24 13:39:03 ts28 
Jul 24 13:39:03 ts28 sd 0:0:0:0: [sda] Attached SCSI disk
Jul 24 13:39:03 ts28 pata_via 0000:00:0f.1: version 0.3.1
Jul 24 13:39:03 ts28 ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
Jul 24 13:39:03 ts28 scsi2 : pata_via
Jul 24 13:39:03 ts28 scsi3 : pata_via
Jul 24 13:39:03 ts28 ata3: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001d800 irq 14
Jul 24 13:39:03 ts28 ata4: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001d808 irq 15
Jul 24 13:39:03 ts28 ata3.00: ATAPI: TEAC DV-516G, F4S6, max UDMA/33
Jul 24 13:39:03 ts28 ata3.00: configured for UDMA/33
Jul 24 13:39:03 ts28 scsi 2:0:0:0: CD-ROM            TEAC     DV-516G          F4S6 PQ: 0 ANSI: 5
Jul 24 13:39:03 ts28 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Jul 24 13:39:03 ts28 serio: i8042 KBD port at 0x60,0x64 irq 1
Jul 24 13:39:03 ts28 serio: i8042 AUX port at 0x60,0x64 irq 12
Jul 24 13:39:03 ts28 mice: PS/2 mouse device common for all mice
Jul 24 13:39:03 ts28 input: AT Translated Set 2 keyboard as /class/input/input0
Jul 24 13:39:03 ts28 usbcore: registered new interface driver hiddev
Jul 24 13:39:03 ts28 usbcore: registered new interface driver usbhid
Jul 24 13:39:03 ts28 drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Jul 24 13:39:03 ts28 TCP bic registered
Jul 24 13:39:03 ts28 Initializing XFRM netlink socket
Jul 24 13:39:03 ts28 NET: Registered protocol family 1
Jul 24 13:39:03 ts28 NET: Registered protocol family 17
Jul 24 13:39:03 ts28 powernow-k8: Found 2 AMD Opteron(tm) Processor 246 processors (version 2.00.00)
Jul 24 13:39:03 ts28 powernow-k8: MP systems not supported by PSB BIOS structure
Jul 24 13:39:03 ts28 powernow-k8: MP systems not supported by PSB BIOS structure
Jul 24 13:39:03 ts28 Freeing unused kernel memory: 296k freed
Jul 24 13:39:03 ts28 Write protecting the kernel read-only data: 840k
Jul 24 13:39:04 ts28 input: ImPS/2 Generic Wheel Mouse as /class/input/input1
Jul 24 13:39:04 ts28 USB Universal Host Controller Interface driver v3.0
Jul 24 13:39:04 ts28 ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
Jul 24 13:39:04 ts28 ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
Jul 24 13:39:04 ts28 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
Jul 24 13:39:04 ts28 uhci_hcd 0000:00:10.0: UHCI Host Controller
Jul 24 13:39:04 ts28 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Jul 24 13:39:04 ts28 uhci_hcd 0000:00:10.0: irq 21, io base 0x0000dc00
Jul 24 13:39:04 ts28 usb usb1: configuration #1 chosen from 1 choice
Jul 24 13:39:04 ts28 hub 1-0:1.0: USB hub found
Jul 24 13:39:04 ts28 hub 1-0:1.0: 2 ports detected
Jul 24 13:39:04 ts28 ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
Jul 24 13:39:04 ts28 uhci_hcd 0000:00:10.1: UHCI Host Controller
Jul 24 13:39:04 ts28 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Jul 24 13:39:04 ts28 uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e000
Jul 24 13:39:04 ts28 usb usb2: configuration #1 chosen from 1 choice
Jul 24 13:39:04 ts28 hub 2-0:1.0: USB hub found
Jul 24 13:39:04 ts28 hub 2-0:1.0: 2 ports detected
Jul 24 13:39:04 ts28 ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
Jul 24 13:39:04 ts28 uhci_hcd 0000:00:10.2: UHCI Host Controller
Jul 24 13:39:04 ts28 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Jul 24 13:39:04 ts28 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e400
Jul 24 13:39:04 ts28 usb usb3: configuration #1 chosen from 1 choice
Jul 24 13:39:04 ts28 hub 3-0:1.0: USB hub found
Jul 24 13:39:04 ts28 hub 3-0:1.0: 2 ports detected
Jul 24 13:39:04 ts28 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Jul 24 13:39:04 ts28 ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
Jul 24 13:39:04 ts28 ehci_hcd 0000:00:10.4: EHCI Host Controller
Jul 24 13:39:04 ts28 ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 4
Jul 24 13:39:04 ts28 ehci_hcd 0000:00:10.4: irq 21, io mem 0xfa010000
Jul 24 13:39:04 ts28 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jul 24 13:39:04 ts28 usb usb4: configuration #1 chosen from 1 choice
Jul 24 13:39:04 ts28 hub 4-0:1.0: USB hub found
Jul 24 13:39:04 ts28 hub 4-0:1.0: 6 ports detected
Jul 24 13:39:04 ts28 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
Jul 24 13:39:04 ts28 kjournald starting.  Commit interval 5 seconds
Jul 24 13:39:04 ts28 EXT3-fs: mounted filesystem with ordered data mode.
Jul 24 13:39:19 ts28 Bluetooth: Core ver 2.11
Jul 24 13:39:19 ts28 NET: Registered protocol family 31
Jul 24 13:39:19 ts28 Bluetooth: HCI device and connection manager initialized
Jul 24 13:39:19 ts28 Bluetooth: HCI socket layer initialized
Jul 24 13:39:19 ts28 Bluetooth: L2CAP ver 2.8
Jul 24 13:39:19 ts28 Bluetooth: L2CAP socket layer initialized
Jul 24 13:39:19 ts28 Bluetooth: RFCOMM socket layer initialized
Jul 24 13:39:19 ts28 Bluetooth: RFCOMM TTY layer initialized
Jul 24 13:39:19 ts28 Bluetooth: RFCOMM ver 1.8
Jul 24 13:39:20 ts28 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Jul 24 13:39:27 ts28 eth0: no IPv6 routers present
Jul 24 13:42:46 ts28 cdrom: entering cdrom_open
Jul 24 13:42:46 ts28 scsi_block_when_processing_errors: rtn: 1
Jul 24 13:42:46 ts28 cdrom: Use count for "/dev/sr0" now 1
Jul 24 13:42:46 ts28 scsi_add_timer: scmd: ffff8100d277ab00, time: 30000, (ffffffff80382c14)
Jul 24 13:42:46 ts28 sr 2:0:0:0: Send: 0xffff8100d277ab00 
Jul 24 13:42:46 ts28 sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
Jul 24 13:42:46 ts28 buffer = 0x0000000000000000, bufflen = 0, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:42:46 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:42:46 ts28 scsi_delete_timer: scmd: ffff8100d277ab00, rtn: 1
Jul 24 13:42:46 ts28 sr 2:0:0:0: Done: 0xffff8100d277ab00 TIMEOUT
Jul 24 13:42:46 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:42:46 ts28 sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
Jul 24 13:42:46 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:42:46 ts28 
Jul 24 13:42:46 ts28 Waking error handler thread
Jul 24 13:42:46 ts28 Error handler scsi_eh_2 waking up
Jul 24 13:42:46 ts28 scsi_eh_2: flush finish cmd: ffff8100d277ab00
Jul 24 13:42:46 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 8000002)
Jul 24 13:42:46 ts28 8 sectors total, 0 bytes done.
Jul 24 13:42:46 ts28 use_sg is 0
Jul 24 13:42:46 ts28 scsi_restart_operations: waking up host to restart
Jul 24 13:42:46 ts28 Error handler scsi_eh_2 sleeping
Jul 24 13:42:46 ts28 scsi_block_when_processing_errors: rtn: 1
Jul 24 13:42:46 ts28 scsi_add_timer: scmd: ffff8100d277ae00, time: 30000, (ffffffff80382c14)
Jul 24 13:42:46 ts28 sr 2:0:0:0: Send: 0xffff8100d277ae00 
Jul 24 13:42:46 ts28 sr 2:0:0:0: CDB: Read TOC/PMA/ATIP: 43 00 00 00 00 00 00 00 0c 40
Jul 24 13:42:46 ts28 buffer = 0xffff8100dea78080, bufflen = 12, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:42:46 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:42:46 ts28 scsi_delete_timer: scmd: ffff8100d277ae00, rtn: 1
Jul 24 13:42:46 ts28 sr 2:0:0:0: Done: 0xffff8100d277ae00 TIMEOUT
Jul 24 13:42:46 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:42:46 ts28 sr 2:0:0:0: CDB: Read TOC/PMA/ATIP: 43 00 00 00 00 00 00 00 0c 40
Jul 24 13:42:46 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:42:46 ts28 Waking error handler thread
Jul 24 13:42:46 ts28 Error handler scsi_eh_2 waking up
Jul 24 13:42:46 ts28 scsi_eh_2: flush finish cmd: ffff8100d277ae00
Jul 24 13:42:46 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 8000002)
Jul 24 13:42:46 ts28 0 sectors total, 12 bytes done.
Jul 24 13:42:46 ts28 use_sg is 1
Jul 24 13:42:46 ts28 scsi_restart_operations: waking up host to restart
Jul 24 13:42:46 ts28 Error handler scsi_eh_2 sleeping
Jul 24 13:42:46 ts28 scsi_block_when_processing_errors: rtn: 1
Jul 24 13:42:46 ts28 scsi_add_timer: scmd: ffff8100d277a200, time: 30000, (ffffffff80382c14)
Jul 24 13:42:46 ts28 sr 2:0:0:0: Send: 0xffff8100d277a200 
Jul 24 13:42:46 ts28 
Jul 24 13:42:46 ts28 sr 2:0:0:0: CDB: Read TOC/PMA/ATIP: 43 00 00 00 00 00 00 00 0c 00
Jul 24 13:42:46 ts28 buffer = 0xffff8100dea78b80, bufflen = 12, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:42:46 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:42:46 ts28 scsi_delete_timer: scmd: ffff8100d277a200, rtn: 1
Jul 24 13:42:46 ts28 sr 2:0:0:0: Done: 0xffff8100d277a200 TIMEOUT
Jul 24 13:42:46 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:42:46 ts28 sr 2:0:0:0: CDB: Read TOC/PMA/ATIP: 43 00 00 00 00 00 00 00 0c 00
Jul 24 13:42:46 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:42:46 ts28 Waking error handler thread
Jul 24 13:42:46 ts28 Error handler scsi_eh_2 waking up
Jul 24 13:42:46 ts28 scsi_eh_2: flush finish cmd: ffff8100d277a200
Jul 24 13:42:46 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 8000002)
Jul 24 13:42:46 ts28 0 sectors total, 12 bytes done.
Jul 24 13:42:46 ts28 use_sg is 1
Jul 24 13:42:46 ts28 scsi_restart_operations: waking up host to restart
Jul 24 13:42:46 ts28 scsi_add_timer: scmd: ffff8100d277a080, time: 30000, (ffffffff80382c14)
Jul 24 13:42:46 ts28 sr 2:0:0:0: Send: 0xffff8100d277a080 
Jul 24 13:42:46 ts28 sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
Jul 24 13:42:46 ts28 buffer = 0xffff8100dea78d80, bufflen = 8, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:42:46 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:42:46 ts28 Error handler scsi_eh_2 sleeping
Jul 24 13:42:46 ts28 scsi_delete_timer: scmd: ffff8100d277a080, rtn: 1
Jul 24 13:42:46 ts28 sr 2:0:0:0: Done: 0xffff8100d277a080 TIMEOUT
Jul 24 13:42:46 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:42:46 ts28 sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
Jul 24 13:42:46 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:42:46 ts28 Waking error handler thread
Jul 24 13:42:46 ts28 Error handler scsi_eh_2 waking up
Jul 24 13:42:46 ts28 scsi_eh_2: flush finish cmd: ffff8100d277a080
Jul 24 13:42:46 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 8000002)
Jul 24 13:42:46 ts28 0 sectors total, 8 bytes done.
Jul 24 13:42:46 ts28 use_sg is 1
Jul 24 13:42:46 ts28 scsi_restart_operations: waking up host to restart
Jul 24 13:42:46 ts28 scsi_add_timer: scmd: ffff8100d277a500, time: 30000, (ffffffff80382c14)
Jul 24 13:42:46 ts28 sr 2:0:0:0: Send: 0xffff8100d277a500 
Jul 24 13:42:46 ts28 sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
Jul 24 13:42:46 ts28 buffer = 0xffff8100dea78380, bufflen = 8, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:42:46 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:42:46 ts28 Error handler scsi_eh_2 sleeping
Jul 24 13:42:46 ts28 scsi_delete_timer: scmd: ffff8100d277a500, rtn: 1
Jul 24 13:42:46 ts28 sr 2:0:0:0: Done: 0xffff8100d277a500 TIMEOUT
Jul 24 13:42:46 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:42:46 ts28 sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
Jul 24 13:42:46 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:42:46 ts28 Waking error handler thread
Jul 24 13:42:46 ts28 
Jul 24 13:42:46 ts28 Error handler scsi_eh_2 waking up
Jul 24 13:42:46 ts28 scsi_eh_2: flush finish cmd: ffff8100d277a500
Jul 24 13:42:46 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 8000002)
Jul 24 13:42:46 ts28 0 sectors total, 8 bytes done.
Jul 24 13:42:46 ts28 use_sg is 1
Jul 24 13:42:46 ts28 scsi_restart_operations: waking up host to restart
Jul 24 13:42:46 ts28 scsi_add_timer: scmd: ffff8100d277a380, time: 30000, (ffffffff80382c14)
Jul 24 13:42:46 ts28 sr 2:0:0:0: Send: 0xffff8100d277a380 
Jul 24 13:42:46 ts28 sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
Jul 24 13:42:46 ts28 buffer = 0xffff8100dea78980, bufflen = 8, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:42:46 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:42:46 ts28 Error handler scsi_eh_2 sleeping
Jul 24 13:42:46 ts28 scsi_delete_timer: scmd: ffff8100d277a380, rtn: 1
Jul 24 13:42:46 ts28 sr 2:0:0:0: Done: 0xffff8100d277a380 TIMEOUT
Jul 24 13:42:46 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:42:46 ts28 sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
Jul 24 13:42:46 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:42:46 ts28 Waking error handler thread
Jul 24 13:42:46 ts28 Error handler scsi_eh_2 waking up
Jul 24 13:42:46 ts28 scsi_eh_2: flush finish cmd: ffff8100d277a380
Jul 24 13:42:46 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 8000002)
Jul 24 13:42:46 ts28 0 sectors total, 8 bytes done.
Jul 24 13:42:46 ts28 use_sg is 1
Jul 24 13:42:46 ts28 scsi_restart_operations: waking up host to restart
Jul 24 13:42:46 ts28 cdrom: entering CDROM_DRIVE_STATUS
Jul 24 13:42:46 ts28 Error handler scsi_eh_2 sleeping
Jul 24 13:42:46 ts28 scsi_block_when_processing_errors: rtn: 1
Jul 24 13:42:46 ts28 scsi_add_timer: scmd: ffff8100d277a680, time: 30000, (ffffffff80382c14)
Jul 24 13:42:46 ts28 sr 2:0:0:0: Send: 0xffff8100d277a680 
Jul 24 13:42:46 ts28 sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
Jul 24 13:42:46 ts28 buffer = 0x0000000000000000, bufflen = 0, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:42:46 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:42:46 ts28 scsi_delete_timer: scmd: ffff8100d277a680, rtn: 1
Jul 24 13:42:46 ts28 sr 2:0:0:0: Done: 0xffff8100d277a680 TIMEOUT
Jul 24 13:42:46 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:42:46 ts28 sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
Jul 24 13:42:46 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:42:46 ts28 Waking error handler thread
Jul 24 13:42:46 ts28 Error handler scsi_eh_2 waking up
Jul 24 13:42:46 ts28 scsi_eh_2: flush finish cmd: ffff8100d277a680
Jul 24 13:42:46 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 8000002)
Jul 24 13:42:46 ts28 0 sectors total, 0 bytes done.
Jul 24 13:42:46 ts28 use_sg is 0
Jul 24 13:42:46 ts28 scsi_restart_operations: waking up host to restart
Jul 24 13:42:46 ts28 cdrom: entering cdrom_release
Jul 24 13:42:46 ts28 cdrom: Use count for "/dev/sr0" now zero
Jul 24 13:42:46 ts28 cdrom: sr0: No DVD+RW
Jul 24 13:42:46 ts28 cdrom: Unlocking door!
Jul 24 13:42:46 ts28 Trying ioctl with scsi command 30
Jul 24 13:42:46 ts28 scsi_add_timer: scmd: ffff810037f30680, time: 10000, (ffffffff80382c14)
Jul 24 13:42:46 ts28 sr 2:0:0:0: Send: 0xffff810037f30680 
Jul 24 13:42:46 ts28 sr 2:0:0:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00 00
Jul 24 13:42:46 ts28 buffer = 0x0000000000000000, bufflen = 0, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:42:46 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:42:46 ts28 Error handler scsi_eh_2 sleeping
Jul 24 13:42:46 ts28 scsi_delete_timer: scmd: ffff810037f30680, rtn: 1
Jul 24 13:42:46 ts28 sr 2:0:0:0: Done: 0xffff810037f30680 SUCCESS
Jul 24 13:42:46 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:42:46 ts28 sr 2:0:0:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00 00
Jul 24 13:42:46 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:42:46 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 0)
Jul 24 13:42:46 ts28 0 sectors total, 0 bytes done.
Jul 24 13:42:46 ts28 use_sg is 0
Jul 24 13:42:46 ts28 Ioctl returned  0x0
Jul 24 13:42:46 ts28 IOCTL Releasing command
Jul 24 13:44:29 ts28 sd 0:0:0:0: [sda] sd_init_command: block=15725208, count=32
Jul 24 13:44:29 ts28 sd 0:0:0:0: [sda] block=15725208
Jul 24 13:44:29 ts28 sd 0:0:0:0: [sda] reading 32/32 512 byte blocks.
Jul 24 13:44:29 ts28 
Jul 24 13:44:29 ts28 scsi_add_timer: scmd: ffff8100d277ae00, time: 60000, (ffffffff80382c14)
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] Send: 0xffff8100d277ae00 
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 ef f2 98 00 00 20 00
Jul 24 13:44:30 ts28 buffer = 0xffff8100dea78280, bufflen = 16384, done = 0xffffffff8038b663, queuecommand 0xffffffff80396bb2
Jul 24 13:44:30 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:30 ts28 scsi_delete_timer: scmd: ffff8100d277ae00, rtn: 1
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] Done: 0xffff8100d277ae00 SUCCESS
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 ef f2 98 00 00 20 00
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] scsi host busy 1 failed 0
Jul 24 13:44:30 ts28 sd 0:0:0:0: Notifying upper driver of completion (result 0)
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:30 ts28 32 sectors total, 16384 bytes done.
Jul 24 13:44:30 ts28 use_sg is 1
Jul 24 13:44:30 ts28 
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] sd_init_command: block=15725240, count=8
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] block=15725240
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] reading 8/8 512 byte blocks.
Jul 24 13:44:30 ts28 scsi_add_timer: scmd: ffff8100d277ab00, time: 60000, (ffffffff80382c14)
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] Send: 0xffff8100d277ab00 
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 ef f2 b8 00 00 08 00
Jul 24 13:44:30 ts28 buffer = 0xffff8100dea78c80, bufflen = 4096, done = 0xffffffff8038b663, queuecommand 0xffffffff80396bb2
Jul 24 13:44:30 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:30 ts28 scsi_delete_timer: scmd: ffff8100d277ab00, rtn: 1
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] Done: 0xffff8100d277ab00 SUCCESS
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 ef f2 b8 00 00 08 00
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] scsi host busy 1 failed 0
Jul 24 13:44:30 ts28 sd 0:0:0:0: Notifying upper driver of completion (result 0)
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:30 ts28 8 sectors total, 4096 bytes done.
Jul 24 13:44:30 ts28 use_sg is 1
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] sd_init_command: block=15725248, count=8
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] block=15725248
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] reading 8/8 512 byte blocks.
Jul 24 13:44:30 ts28 scsi_add_timer: scmd: ffff8100d277ac80, time: 60000, (ffffffff80382c14)
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] Send: 0xffff8100d277ac80 
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 ef f2 c0 00 00 08 00
Jul 24 13:44:30 ts28 buffer = 0xffff8100dea78380, bufflen = 4096, done = 0xffffffff8038b663, queuecommand 0xffffffff80396bb2
Jul 24 13:44:30 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:30 ts28 scsi_delete_timer: scmd: ffff8100d277ac80, rtn: 1
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] Done: 0xffff8100d277ac80 SUCCESS
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 ef f2 c0 00 00 08 00
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] scsi host busy 1 failed 0
Jul 24 13:44:30 ts28 sd 0:0:0:0: Notifying upper driver of completion (result 0)
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:30 ts28 8 sectors total, 4096 bytes done.
Jul 24 13:44:30 ts28 use_sg is 1
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] sd_init_command: block=15725256, count=56
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] block=15725256
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] reading 56/56 512 byte blocks.
Jul 24 13:44:30 ts28 scsi_add_timer: scmd: ffff8100d277a200, time: 60000, (ffffffff80382c14)
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] Send: 0xffff8100d277a200 
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 ef f2 c8 00 00 38 00
Jul 24 13:44:30 ts28 buffer = 0xffff8100dea78a80, bufflen = 28672, done = 0xffffffff8038b663, queuecommand 0xffffffff80396bb2
Jul 24 13:44:30 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:30 ts28 scsi_delete_timer: scmd: ffff8100d277a200, rtn: 1
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] Done: 0xffff8100d277a200 SUCCESS
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 ef f2 c8 00 00 38 00
Jul 24 13:44:30 ts28 
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] scsi host busy 1 failed 0
Jul 24 13:44:30 ts28 sd 0:0:0:0: Notifying upper driver of completion (result 0)
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:30 ts28 56 sectors total, 28672 bytes done.
Jul 24 13:44:30 ts28 use_sg is 4
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] sd_init_command: block=15725312, count=24
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] block=15725312
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] reading 24/24 512 byte blocks.
Jul 24 13:44:30 ts28 scsi_add_timer: scmd: ffff8100d277a800, time: 60000, (ffffffff80382c14)
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] Send: 0xffff8100d277a800 
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 ef f3 00 00 00 18 00
Jul 24 13:44:30 ts28 buffer = 0xffff8100dea78980, bufflen = 12288, done = 0xffffffff8038b663, queuecommand 0xffffffff80396bb2
Jul 24 13:44:30 ts28 
Jul 24 13:44:30 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:30 ts28 scsi_delete_timer: scmd: ffff8100d277a800, rtn: 1
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] Done: 0xffff8100d277a800 SUCCESS
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 ef f3 00 00 00 18 00
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] scsi host busy 1 failed 0
Jul 24 13:44:30 ts28 sd 0:0:0:0: Notifying upper driver of completion (result 0)
Jul 24 13:44:30 ts28 sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:30 ts28 24 sectors total, 12288 bytes done.
Jul 24 13:44:30 ts28 use_sg is 2
Jul 24 13:44:30 ts28 cdrom: entering cdrom_open
Jul 24 13:44:30 ts28 scsi_block_when_processing_errors: rtn: 1
Jul 24 13:44:30 ts28 cdrom: Use count for "/dev/sr0" now 1
Jul 24 13:44:30 ts28 scsi_add_timer: scmd: ffff8100d277a980, time: 30000, (ffffffff80382c14)
Jul 24 13:44:30 ts28 sr 2:0:0:0: Send: 0xffff8100d277a980 
Jul 24 13:44:30 ts28 sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
Jul 24 13:44:30 ts28 buffer = 0x0000000000000000, bufflen = 0, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:44:30 ts28 
Jul 24 13:44:30 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:30 ts28 scsi_delete_timer: scmd: ffff8100d277a980, rtn: 1
Jul 24 13:44:30 ts28 sr 2:0:0:0: Done: 0xffff8100d277a980 TIMEOUT
Jul 24 13:44:30 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:30 ts28 sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
Jul 24 13:44:30 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:44:30 ts28 Waking error handler thread
Jul 24 13:44:30 ts28 Error handler scsi_eh_2 waking up
Jul 24 13:44:30 ts28 scsi_eh_2: flush finish cmd: ffff8100d277a980
Jul 24 13:44:30 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 8000002)
Jul 24 13:44:30 ts28 33 sectors total, 0 bytes done.
Jul 24 13:44:30 ts28 use_sg is 0
Jul 24 13:44:30 ts28 scsi_restart_operations: waking up host to restart
Jul 24 13:44:30 ts28 Error handler scsi_eh_2 sleeping
Jul 24 13:44:30 ts28 scsi_block_when_processing_errors: rtn: 1
Jul 24 13:44:30 ts28 scsi_add_timer: scmd: ffff8100d277a800, time: 30000, (ffffffff80382c14)
Jul 24 13:44:30 ts28 sr 2:0:0:0: Send: 0xffff8100d277a800 
Jul 24 13:44:30 ts28 sr 2:0:0:0: CDB: Read TOC/PMA/ATIP: 43 00 00 00 00 00 00 00 0c 40
Jul 24 13:44:30 ts28 buffer = 0xffff8100dea78980, bufflen = 12, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:44:30 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:30 ts28 scsi_delete_timer: scmd: ffff8100d277a800, rtn: 1
Jul 24 13:44:30 ts28 sr 2:0:0:0: Done: 0xffff8100d277a800 TIMEOUT
Jul 24 13:44:30 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:30 ts28 sr 2:0:0:0: CDB: Read TOC/PMA/ATIP: 43 00 00 00 00 00 00 00 0c 40
Jul 24 13:44:30 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:44:30 ts28 Waking error handler thread
Jul 24 13:44:30 ts28 Error handler scsi_eh_2 waking up
Jul 24 13:44:30 ts28 scsi_eh_2: flush finish cmd: ffff8100d277a800
Jul 24 13:44:30 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 8000002)
Jul 24 13:44:30 ts28 0 sectors total, 12 bytes done.
Jul 24 13:44:30 ts28 use_sg is 1
Jul 24 13:44:30 ts28 scsi_restart_operations: waking up host to restart
Jul 24 13:44:30 ts28 Error handler scsi_eh_2 sleeping
Jul 24 13:44:30 ts28 scsi_block_when_processing_errors: rtn: 1
Jul 24 13:44:30 ts28 scsi_add_timer: scmd: ffff8100d277a200, time: 30000, (ffffffff80382c14)
Jul 24 13:44:30 ts28 sr 2:0:0:0: Send: 0xffff8100d277a200 
Jul 24 13:44:30 ts28 sr 2:0:0:0: CDB: Read TOC/PMA/ATIP: 43 00 00 00 00 00 00 00 0c 00
Jul 24 13:44:30 ts28 buffer = 0xffff8100dea78a80, bufflen = 12, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:44:30 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:30 ts28 scsi_delete_timer: scmd: ffff8100d277a200, rtn: 1
Jul 24 13:44:30 ts28 sr 2:0:0:0: Done: 0xffff8100d277a200 TIMEOUT
Jul 24 13:44:30 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:30 ts28 sr 2:0:0:0: CDB: Read TOC/PMA/ATIP: 43 00 00 00 00 00 00 00 0c 00
Jul 24 13:44:30 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:44:30 ts28 Waking error handler thread
Jul 24 13:44:30 ts28 Error handler scsi_eh_2 waking up
Jul 24 13:44:30 ts28 scsi_eh_2: flush finish cmd: ffff8100d277a200
Jul 24 13:44:30 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 8000002)
Jul 24 13:44:30 ts28 0 sectors total, 12 bytes done.
Jul 24 13:44:30 ts28 use_sg is 1
Jul 24 13:44:30 ts28 scsi_restart_operations: waking up host to restart
Jul 24 13:44:30 ts28 scsi_add_timer: scmd: ffff8100d277ac80, time: 30000, (ffffffff80382c14)
Jul 24 13:44:30 ts28 sr 2:0:0:0: Send: 0xffff8100d277ac80 
Jul 24 13:44:30 ts28 sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
Jul 24 13:44:30 ts28 buffer = 0xffff8100dea78380, bufflen = 8, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:44:30 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:30 ts28 Error handler scsi_eh_2 sleeping
Jul 24 13:44:30 ts28 scsi_delete_timer: scmd: ffff8100d277ac80, rtn: 1
Jul 24 13:44:30 ts28 sr 2:0:0:0: Done: 0xffff8100d277ac80 TIMEOUT
Jul 24 13:44:30 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:30 ts28 sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
Jul 24 13:44:30 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:44:30 ts28 Waking error handler thread
Jul 24 13:44:30 ts28 Error handler scsi_eh_2 waking up
Jul 24 13:44:30 ts28 scsi_eh_2: flush finish cmd: ffff8100d277ac80
Jul 24 13:44:30 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 8000002)
Jul 24 13:44:30 ts28 0 sectors total, 8 bytes done.
Jul 24 13:44:30 ts28 use_sg is 1
Jul 24 13:44:30 ts28 scsi_restart_operations: waking up host to restart
Jul 24 13:44:30 ts28 scsi_add_timer: scmd: ffff8100d277ab00, time: 30000, (ffffffff80382c14)
Jul 24 13:44:30 ts28 sr 2:0:0:0: Send: 0xffff8100d277ab00 
Jul 24 13:44:30 ts28 sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
Jul 24 13:44:30 ts28 buffer = 0xffff8100dea78c80, bufflen = 8, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:44:30 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:30 ts28 Error handler scsi_eh_2 sleeping
Jul 24 13:44:30 ts28 scsi_delete_timer: scmd: ffff8100d277ab00, rtn: 1
Jul 24 13:44:30 ts28 sr 2:0:0:0: Done: 0xffff8100d277ab00 TIMEOUT
Jul 24 13:44:30 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:30 ts28 sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
Jul 24 13:44:30 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:44:30 ts28 Waking error handler thread
Jul 24 13:44:30 ts28 Error handler scsi_eh_2 waking up
Jul 24 13:44:30 ts28 scsi_eh_2: flush finish cmd: ffff8100d277ab00
Jul 24 13:44:30 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 8000002)
Jul 24 13:44:30 ts28 0 sectors total, 8 bytes done.
Jul 24 13:44:30 ts28 use_sg is 1
Jul 24 13:44:30 ts28 scsi_restart_operations: waking up host to restart
Jul 24 13:44:30 ts28 scsi_add_timer: scmd: ffff8100d277ae00, time: 30000, (ffffffff80382c14)
Jul 24 13:44:30 ts28 sr 2:0:0:0: Send: 0xffff8100d277ae00 
Jul 24 13:44:30 ts28 sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
Jul 24 13:44:30 ts28 buffer = 0xffff8100dea78280, bufflen = 8, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:44:30 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:30 ts28 Error handler scsi_eh_2 sleeping
Jul 24 13:44:30 ts28 scsi_delete_timer: scmd: ffff8100d277ae00, rtn: 1
Jul 24 13:44:30 ts28 sr 2:0:0:0: Done: 0xffff8100d277ae00 TIMEOUT
Jul 24 13:44:30 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:30 ts28 sr 2:0:0:0: CDB: Read Capacity(10): 25 00 00 00 00 00 00 00 00 00
Jul 24 13:44:30 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:44:30 ts28 Waking error handler thread
Jul 24 13:44:30 ts28 Error handler scsi_eh_2 waking up
Jul 24 13:44:30 ts28 scsi_eh_2: flush finish cmd: ffff8100d277ae00
Jul 24 13:44:30 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 8000002)
Jul 24 13:44:30 ts28 0 sectors total, 8 bytes done.
Jul 24 13:44:30 ts28 use_sg is 1
Jul 24 13:44:30 ts28 scsi_restart_operations: waking up host to restart
Jul 24 13:44:30 ts28 Error handler scsi_eh_2 sleeping
Jul 24 13:44:30 ts28 scsi_block_when_processing_errors: rtn: 1
Jul 24 13:44:30 ts28 scsi_block_when_processing_errors: rtn: 1
Jul 24 13:44:30 ts28 scsi_add_timer: scmd: ffff8100d277a680, time: 10000, (ffffffff80382c14)
Jul 24 13:44:30 ts28 sr 2:0:0:0: Send: 0xffff8100d277a680 
Jul 24 13:44:30 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 ec 00
Jul 24 13:44:30 ts28 buffer = 0xffff8100dea78080, bufflen = 512, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:44:30 ts28 scsi_delete_timer: scmd: ffff8100d277a680, rtn: 1
Jul 24 13:44:30 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:30 ts28 sr 2:0:0:0: Done: 0xffff8100d277a680 RETRY
Jul 24 13:44:30 ts28 sr 2:0:0:0: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:30 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 ec 00
Jul 24 13:44:30 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:44:30 ts28 Inserting command ffff8100d277a680 into mlqueue
Jul 24 13:44:31 ts28 scsi_add_timer: scmd: ffff8100d277a680, time: 10000, (ffffffff80382c14)
Jul 24 13:44:31 ts28 sr 2:0:0:0: Send: 0xffff8100d277a680 
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 ec 00
Jul 24 13:44:31 ts28 buffer = 0xffff8100dea78080, bufflen = 512, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:44:31 ts28 scsi_delete_timer: scmd: ffff8100d277a680, rtn: 1
Jul 24 13:44:31 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:31 ts28 sr 2:0:0:0: Done: 0xffff8100d277a680 RETRY
Jul 24 13:44:31 ts28 sr 2:0:0:0: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 ec 00
Jul 24 13:44:31 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:44:31 ts28 Inserting command ffff8100d277a680 into mlqueue
Jul 24 13:44:31 ts28 scsi_add_timer: scmd: ffff8100d277a680, time: 10000, (ffffffff80382c14)
Jul 24 13:44:31 ts28 sr 2:0:0:0: Send: 0xffff8100d277a680 
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 ec 00
Jul 24 13:44:31 ts28 buffer = 0xffff8100dea78080, bufflen = 512, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:44:31 ts28 scsi_delete_timer: scmd: ffff8100d277a680, rtn: 1
Jul 24 13:44:31 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:31 ts28 sr 2:0:0:0: Done: 0xffff8100d277a680 RETRY
Jul 24 13:44:31 ts28 sr 2:0:0:0: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 ec 00
Jul 24 13:44:31 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:44:31 ts28 
Jul 24 13:44:31 ts28 Inserting command ffff8100d277a680 into mlqueue
Jul 24 13:44:31 ts28 scsi_add_timer: scmd: ffff8100d277a680, time: 10000, (ffffffff80382c14)
Jul 24 13:44:31 ts28 sr 2:0:0:0: Send: 0xffff8100d277a680 
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 ec 00
Jul 24 13:44:31 ts28 buffer = 0xffff8100dea78080, bufflen = 512, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:44:31 ts28 scsi_delete_timer: scmd: ffff8100d277a680, rtn: 1
Jul 24 13:44:31 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:31 ts28 sr 2:0:0:0: Done: 0xffff8100d277a680 RETRY
Jul 24 13:44:31 ts28 sr 2:0:0:0: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 ec 00
Jul 24 13:44:31 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:44:31 ts28 Inserting command ffff8100d277a680 into mlqueue
Jul 24 13:44:31 ts28 scsi_add_timer: scmd: ffff8100d277a680, time: 10000, (ffffffff80382c14)
Jul 24 13:44:31 ts28 sr 2:0:0:0: Send: 0xffff8100d277a680 
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 ec 00
Jul 24 13:44:31 ts28 buffer = 0xffff8100dea78080, bufflen = 512, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:44:31 ts28 scsi_delete_timer: scmd: ffff8100d277a680, rtn: 1
Jul 24 13:44:31 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:31 ts28 sr 2:0:0:0: Done: 0xffff8100d277a680 RETRY
Jul 24 13:44:31 ts28 sr 2:0:0:0: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 ec 00
Jul 24 13:44:31 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:44:31 ts28 Inserting command ffff8100d277a680 into mlqueue
Jul 24 13:44:31 ts28 scsi_add_timer: scmd: ffff8100d277a680, time: 10000, (ffffffff80382c14)
Jul 24 13:44:31 ts28 sr 2:0:0:0: Send: 0xffff8100d277a680 
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 ec 00
Jul 24 13:44:31 ts28 buffer = 0xffff8100dea78080, bufflen = 512, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:44:31 ts28 scsi_delete_timer: scmd: ffff8100d277a680, rtn: 1
Jul 24 13:44:31 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:31 ts28 sr 2:0:0:0: Done: 0xffff8100d277a680 SUCCESS
Jul 24 13:44:31 ts28 sr 2:0:0:0: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 ec 00
Jul 24 13:44:31 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:44:31 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 70000)
Jul 24 13:44:31 ts28 1 sectors total, 512 bytes done.
Jul 24 13:44:31 ts28 use_sg is 1
Jul 24 13:44:31 ts28 scsi_block_when_processing_errors: rtn: 1
Jul 24 13:44:31 ts28 scsi_block_when_processing_errors: rtn: 1
Jul 24 13:44:31 ts28 scsi_add_timer: scmd: ffff8100d277a680, time: 10000, (ffffffff80382c14)
Jul 24 13:44:31 ts28 sr 2:0:0:0: Send: 0xffff8100d277a680 
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 a1 00
Jul 24 13:44:31 ts28 buffer = 0xffff8100dea78080, bufflen = 512, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:44:31 ts28 scsi_delete_timer: scmd: ffff8100d277a680, rtn: 1
Jul 24 13:44:31 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:31 ts28 
Jul 24 13:44:31 ts28 sr 2:0:0:0: Done: 0xffff8100d277a680 RETRY
Jul 24 13:44:31 ts28 sr 2:0:0:0: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 a1 00
Jul 24 13:44:31 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:44:31 ts28 Inserting command ffff8100d277a680 into mlqueue
Jul 24 13:44:31 ts28 scsi_add_timer: scmd: ffff8100d277a680, time: 10000, (ffffffff80382c14)
Jul 24 13:44:31 ts28 sr 2:0:0:0: Send: 0xffff8100d277a680 
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 a1 00
Jul 24 13:44:31 ts28 buffer = 0xffff8100dea78080, bufflen = 512, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:44:31 ts28 scsi_delete_timer: scmd: ffff8100d277a680, rtn: 1
Jul 24 13:44:31 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:31 ts28 sr 2:0:0:0: Done: 0xffff8100d277a680 RETRY
Jul 24 13:44:31 ts28 sr 2:0:0:0: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 a1 00
Jul 24 13:44:31 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:44:31 ts28 
Jul 24 13:44:31 ts28 Inserting command ffff8100d277a680 into mlqueue
Jul 24 13:44:31 ts28 scsi_add_timer: scmd: ffff8100d277a680, time: 10000, (ffffffff80382c14)
Jul 24 13:44:31 ts28 sr 2:0:0:0: Send: 0xffff8100d277a680 
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 a1 00
Jul 24 13:44:31 ts28 buffer = 0xffff8100dea78080, bufflen = 512, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:44:31 ts28 scsi_delete_timer: scmd: ffff8100d277a680, rtn: 1
Jul 24 13:44:31 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:31 ts28 sr 2:0:0:0: Done: 0xffff8100d277a680 RETRY
Jul 24 13:44:31 ts28 sr 2:0:0:0: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 a1 00
Jul 24 13:44:31 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:44:31 ts28 Inserting command ffff8100d277a680 into mlqueue
Jul 24 13:44:31 ts28 scsi_add_timer: scmd: ffff8100d277a680, time: 10000, (ffffffff80382c14)
Jul 24 13:44:31 ts28 sr 2:0:0:0: Send: 0xffff8100d277a680 
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 a1 00
Jul 24 13:44:31 ts28 buffer = 0xffff8100dea78080, bufflen = 512, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:44:31 ts28 scsi_delete_timer: scmd: ffff8100d277a680, rtn: 1
Jul 24 13:44:31 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:31 ts28 sr 2:0:0:0: Done: 0xffff8100d277a680 RETRY
Jul 24 13:44:31 ts28 sr 2:0:0:0: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 a1 00
Jul 24 13:44:31 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:44:31 ts28 Inserting command ffff8100d277a680 into mlqueue
Jul 24 13:44:31 ts28 scsi_add_timer: scmd: ffff8100d277a680, time: 10000, (ffffffff80382c14)
Jul 24 13:44:31 ts28 sr 2:0:0:0: Send: 0xffff8100d277a680 
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 a1 00
Jul 24 13:44:31 ts28 buffer = 0xffff8100dea78080, bufflen = 512, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:44:31 ts28 scsi_delete_timer: scmd: ffff8100d277a680, rtn: 1
Jul 24 13:44:31 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:31 ts28 sr 2:0:0:0: Done: 0xffff8100d277a680 RETRY
Jul 24 13:44:31 ts28 
Jul 24 13:44:31 ts28 sr 2:0:0:0: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 a1 00
Jul 24 13:44:31 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:44:31 ts28 Inserting command ffff8100d277a680 into mlqueue
Jul 24 13:44:31 ts28 scsi_add_timer: scmd: ffff8100d277a680, time: 10000, (ffffffff80382c14)
Jul 24 13:44:31 ts28 sr 2:0:0:0: Send: 0xffff8100d277a680 
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 a1 00
Jul 24 13:44:31 ts28 buffer = 0xffff8100dea78080, bufflen = 512, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:44:31 ts28 scsi_delete_timer: scmd: ffff8100d277a680, rtn: 1
Jul 24 13:44:31 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:31 ts28 sr 2:0:0:0: Done: 0xffff8100d277a680 SUCCESS
Jul 24 13:44:31 ts28 sr 2:0:0:0: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: ATA command pass through(16): 85 08 0e 00 00 00 00 00 00 00 00 00 00 00 a1 00
Jul 24 13:44:31 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:44:31 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 70000)
Jul 24 13:44:31 ts28 1 sectors total, 512 bytes done.
Jul 24 13:44:31 ts28 use_sg is 1
Jul 24 13:44:31 ts28 cdrom: entering cdrom_release
Jul 24 13:44:31 ts28 cdrom: Use count for "/dev/sr0" now zero
Jul 24 13:44:31 ts28 cdrom: sr0: No DVD+RW
Jul 24 13:44:31 ts28 cdrom: Unlocking door!
Jul 24 13:44:31 ts28 Trying ioctl with scsi command 30
Jul 24 13:44:31 ts28 scsi_add_timer: scmd: ffff8100d277a680, time: 10000, (ffffffff80382c14)
Jul 24 13:44:31 ts28 sr 2:0:0:0: Send: 0xffff8100d277a680 
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00 00
Jul 24 13:44:31 ts28 buffer = 0x0000000000000000, bufflen = 0, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:44:31 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:31 ts28 scsi_delete_timer: scmd: ffff8100d277a680, rtn: 1
Jul 24 13:44:31 ts28 sr 2:0:0:0: Done: 0xffff8100d277a680 SUCCESS
Jul 24 13:44:31 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00 00
Jul 24 13:44:31 ts28 sr 2:0:0:0: scsi host busy 1 failed 0
Jul 24 13:44:31 ts28 sr 2:0:0:0: Notifying upper driver of completion (result 0)
Jul 24 13:44:31 ts28 1 sectors total, 0 bytes done.
Jul 24 13:44:31 ts28 use_sg is 0
Jul 24 13:44:31 ts28 
Jul 24 13:44:31 ts28 Ioctl returned  0x0
Jul 24 13:44:31 ts28 IOCTL Releasing command
Jul 24 13:44:31 ts28 cdrom: entering cdrom_open
Jul 24 13:44:31 ts28 scsi_block_when_processing_errors: rtn: 1
Jul 24 13:44:31 ts28 cdrom: Use count for "/dev/sr0" now 1
Jul 24 13:44:31 ts28 scsi_add_timer: scmd: ffff8100d277a680, time: 30000, (ffffffff80382c14)
Jul 24 13:44:31 ts28 sr 2:0:0:0: Send: 0xffff8100d277a680 
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
Jul 24 13:44:31 ts28 buffer = 0x0000000000000000, bufflen = 0, done = 0xffffffff803856e5, queuecommand 0xffffffff80396bb2
Jul 24 13:44:31 ts28 leaving scsi_dispatch_cmnd()
Jul 24 13:44:31 ts28 scsi_delete_timer: scmd: ffff8100d277a680, rtn: 1
Jul 24 13:44:31 ts28 sr 2:0:0:0: Done: 0xffff8100d277a680 TIMEOUT
Jul 24 13:44:31 ts28 sr 2:0:0:0: Result: hostbyte=DID_OK driverbyte=DRIVER_OK,SUGGEST_OK
Jul 24 13:44:31 ts28 sr 2:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
Jul 24 13:44:31 ts28 sr 2:0:0:0: scsi host busy 1 failed 0