From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sergei Shtylyov Subject: Re: hpt374 sata (Highpoint Rocket 1540) Date: Wed, 01 Aug 2007 19:58:46 +0400 Message-ID: <46B0ADB6.60207@ru.mvista.com> References: <1185880124.3483.25.camel@localhost> <46AF76D7.8050800@ru.mvista.com> <1185916925.8484.23.camel@orchid.arb.net> <200707312332.10820.bzolnier@gmail.com> <46B08D63.4040205@ru.mvista.com> <1185983536.16340.3.camel@orchid.arb.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from gateway-1237.mvista.com ([63.81.120.155]:24727 "EHLO imap.sh.mvista.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1752288AbXHAP4s (ORCPT ); Wed, 1 Aug 2007 11:56:48 -0400 In-Reply-To: <1185983536.16340.3.camel@orchid.arb.net> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Bob Ham Cc: Bartlomiej Zolnierkiewicz , linux-ide@vger.kernel.org Bob Ham wrote: >>>>>>>I've had a Highpoint Rocket 1540 (not "RocketRAID") SATA controller for >>>>>>>a while now, using a proprietary binary driver from Highpoint in a linux >>>>>>>2.4 kernel. The chipset is an hpt374. The hpt366 driver freezes on >>>>>>>boot, as reported by others. >>>>>> Can we see a bootlog please? >>>>> ... and the output of 'lspci -v' too. >> If possible, turn off that driver, >>then post that output... > This is the output of the boot using the pata_hpt37x driver: Hrm... what I asked for was 'lspci -v' output. :-) > hpt37x: DPLL did not stabilize. > pata_hpt37x: BIOS has not set timing clocks. > hpt37x: DPLL did not stabilize. Yes, this ia a known issue, and the fix for it is in the -mm tree: http://kernel.org/diff/diffview.cgi?file=%2Fpub%2Flinux%2Fkernel%2Fpeople%2Fakpm%2Fpatches%2F2.6%2F2.6.23-rc1%2F2.6.23-rc1-mm2%2F2.6.23-rc1-mm2.bz2;z=950 WBR, Sergei