From: Sebastian Witt <hasw@hasw.net>
To: jgarzik@pobox.com
Cc: linux-ide@vger.kernel.org
Subject: sata_promise: Warning/Errors with SATA300 TX4 and SAMSUNG HD501LJ
Date: Thu, 09 Aug 2007 23:19:09 +0200 [thread overview]
Message-ID: <46BB84CD.8080006@hasw.net> (raw)
Hello,
I'm using a Promise SATA300 TX4 with SAMSUNG HD501LJ harddisks on kernel 2.6.21.
On high disk load sometimes warning/error messages are printed out:
...
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: cmd c8/00:08:8f:7f:85/00:00:00:00:00/ef tag 0 cdb 0x0 data 4096 in
res 50/00:00:96:7f:85/00:00:11:00:00/ef Emask 0x1 (device error)
ata4.00: configured for UDMA/133
ata4: EH complete
...
They are not happening very often (three in the last few days) and also
no other problems occured (filesystem/data ok).
dmesg:
...
scsi0 : sata_promise
ata1: SATA link down (SStatus 0 SControl 300)
scsi1 : sata_promise
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi2 : sata_promise
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi3 : sata_promise
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 1:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sda: sda1
sd 1:0:0:0: [sda] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg0 type 0
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg1 type 0
scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sdc: sdc1
sd 3:0:0:0: [sdc] Attached SCSI disk
sd 3:0:0:0: Attached scsi generic sg2 type 0
....
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: cmd 25/00:28:d7:51:a5/00:00:11:00:00/e0 tag 0 cdb 0x0 data 20480 in
res 50/00:00:fe:51:a5/00:00:11:00:00/e0 Emask 0x1 (device error)
ata4.00: configured for UDMA/133
ata4: EH complete
sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata4.00: cmd c8/00:08:8f:7f:85/00:00:00:00:00/ef tag 0 cdb 0x0 data 4096 in
res 50/00:00:96:7f:85/00:00:11:00:00/ef Emask 0x1 (device error)
ata4.00: configured for UDMA/133
ata4: EH complete
sd 3:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata3.00: cmd 25/00:80:2f:fd:c2/00:00:1a:00:00/e0 tag 0 cdb 0x0 data 65536 in
res 50/00:00:ae:fd:c2/00:00:1a:00:00/e0 Emask 0x1 (device error)
ata3.00: configured for UDMA/133
ata3: EH complete
sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
Some ideas? Not optimal/not good/bad/very bad?
Regards,
Sebastian
reply other threads:[~2007-08-09 21:19 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46BB84CD.8080006@hasw.net \
--to=hasw@hasw.net \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).