From mboxrd@z Thu Jan 1 00:00:00 1970 From: Karim 'Kasi Mir' Senoucci Subject: Should sata_mv work with Highpoint RocketRAID 2300? Date: Tue, 14 Aug 2007 18:47:55 +0200 Message-ID: <46C1DCBB.9020308@double-you.de> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from mx1.melzone.de ([81.169.156.183]:41266 "EHLO mx1.melzone.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753398AbXHNR2u (ORCPT ); Tue, 14 Aug 2007 13:28:50 -0400 Received: from [85.177.103.65] (helo=[10.0.2.181]) by mx1.melzone.de with esmtpa (Exim 4.60) (envelope-from ) id 1IKzYf-0001vX-AF for linux-ide@vger.kernel.org; Tue, 14 Aug 2007 18:47:53 +0200 Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Hello all, sorry if this it too dumb a question, but since I haven't gotten any results with the sata_mv driver (kernel 2.6.22.2), I was wondering if the Highpoint RocketRaid 2300 controller - which features a Marvell chip - is even supposed to work with sata_mv. lspci shows in regard to the controller card: 06:00.0 SCSI storage controller [0100]: Triones Technologies, Inc. Unknown device [1103:2300] (rev 02) Subsystem: Marvell Technology Group Ltd. Unknown device [11ab:11ab] Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at fd500000 (64-bit, non-prefetchable) [size=1M] I/O ports at 4800 [size=256] Capabilities: [40] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [60] Express Legacy Endpoint IRQ 0 Is this one of the cards the sata_mv driver should handle, or do I need to use another kernel module, or is that chip without linux support so far? Thanks for any insight into the matter. Greetings, Karim.