* Re: sata drive loosing connection/resetting port
[not found] <20070813220241.3f4b8df5@workstation64.home>
@ 2007-08-13 20:11 ` Michal Piotrowski
2007-08-14 10:15 ` Tejun Heo
0 siblings, 1 reply; 7+ messages in thread
From: Michal Piotrowski @ 2007-08-13 20:11 UTC (permalink / raw)
To: Andreas Radke; +Cc: linux-kernel, Jeff Garzik, IDE/ATA development list
Hi Andreas,
[Adding Jeff and linux-ide to CC]
On 13/08/07, Andreas Radke <a.radke@arcor.de> wrote:
> running ArchLinux kernel 2.6.22.2 on a Abit IP35 Pro motherboard with
> Pro Intel P35 chipset (ICH9R + Jmicron) i have these entries all few
> minutes:
>
> ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400101 action 0x2 frozen
> ata1.00: (irq_stat 0x08000000, interface fatal error)
> ata1.00: cmd ca/00:f8:18:d2:27/00:00:00:00:00/e6 tag 0 cdb 0x0 data
> 126976 out res 50/00:00:80:2b:3d/00:00:00:00:00/e0 Emask 0x10 (ATA bus
> error) ata1: soft resetting port
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: configured for UDMA/133
> ata1: EH complete
> sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
>
>
> hard disc is a Western Digital 10k Raptor connected to the ICH9R. on
> the second port of the southbridge is another Samsung hard disc drive
> connected without errors. both controllers are running ahci mode.
>
> lsmod:
> sr_mod 16548 0
> cdrom 38312 1 sr_mod
> sd_mod 25088 6
> pata_jmicron 5888 0
> ahci 22404 4
> libata 119440 2 pata_jmicron,ahci
>
> i've tried changing the SATA cables and also the power wire to the
> disc without success. i checked the disc successfully with Hitachi
> drive fitness test. it has worked without any trouble so far in a Intel
> P965 ICH8 based mainboard.
>
> any idea how to find the reason?
>
> Andreas Radke
> ArchLinux developer/maintainer
Please try to CC to the appropriate maintainer(s).
Regards,
Michal
--
LOG
http://www.stardust.webpages.pl/log/
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: sata drive loosing connection/resetting port
2007-08-13 20:11 ` sata drive loosing connection/resetting port Michal Piotrowski
@ 2007-08-14 10:15 ` Tejun Heo
2007-08-14 20:19 ` Andreas Radke
0 siblings, 1 reply; 7+ messages in thread
From: Tejun Heo @ 2007-08-14 10:15 UTC (permalink / raw)
To: Michal Piotrowski
Cc: Andreas Radke, linux-kernel, Jeff Garzik,
IDE/ATA development list
Michal Piotrowski wrote:
> Hi Andreas,
>
> [Adding Jeff and linux-ide to CC]
>
> On 13/08/07, Andreas Radke <a.radke@arcor.de> wrote:
>> running ArchLinux kernel 2.6.22.2 on a Abit IP35 Pro motherboard with
>> Pro Intel P35 chipset (ICH9R + Jmicron) i have these entries all few
>> minutes:
>>
>> ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400101 action 0x2 frozen
>> ata1.00: (irq_stat 0x08000000, interface fatal error)
>> ata1.00: cmd ca/00:f8:18:d2:27/00:00:00:00:00/e6 tag 0 cdb 0x0 data
>> 126976 out res 50/00:00:80:2b:3d/00:00:00:00:00/e0 Emask 0x10 (ATA bus
>> error) ata1: soft resetting port
>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> ata1.00: configured for UDMA/133
>> ata1: EH complete
>> sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
>> sd 0:0:0:0: [sda] Write Protect is off
>> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
>> support DPO or FUA
>>
>>
>> hard disc is a Western Digital 10k Raptor connected to the ICH9R. on
>> the second port of the southbridge is another Samsung hard disc drive
>> connected without errors. both controllers are running ahci mode.
>>
>> lsmod:
>> sr_mod 16548 0
>> cdrom 38312 1 sr_mod
>> sd_mod 25088 6
>> pata_jmicron 5888 0
>> ahci 22404 4
>> libata 119440 2 pata_jmicron,ahci
>>
>> i've tried changing the SATA cables and also the power wire to the
>> disc without success. i checked the disc successfully with Hitachi
>> drive fitness test. it has worked without any trouble so far in a Intel
>> P965 ICH8 based mainboard.
>>
>> any idea how to find the reason?
Most likely a hardware issue.
* Please try a different harddrive/cable and connect to a different port.
* Get a different power supply and see whether that changes anything.
--
tejun
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: sata drive loosing connection/resetting port
2007-08-14 10:15 ` Tejun Heo
@ 2007-08-14 20:19 ` Andreas Radke
2007-08-15 6:19 ` Tejun Heo
0 siblings, 1 reply; 7+ messages in thread
From: Andreas Radke @ 2007-08-14 20:19 UTC (permalink / raw)
To: Tejun Heo, linux-kernel
Cc: Michal Piotrowski, Jeff Garzik, IDE/ATA development list
Am Tue, 14 Aug 2007 19:15:52 +0900
schrieb Tejun Heo <htejun@gmail.com>:
> Most likely a hardware issue.
>
> * Please try a different harddrive/cable and connect to a different
> port.
>
> * Get a different power supply and see whether that changes anything.
>
already tried different ports, several SATA cables on that mainboard and
psu works well. the Samsung drive works well no matter where
connected. never had any issues with the Raptor drive when it was
connected to the "old" Intel P965 board before. what's the difference
form ICH8 to ICH9R? any changes in how the driver works?
i confirmed, that the issues still resist in kernel 2.6.23rc3 and also
when using controller in "ide" mode together with ata_piix modul.
but on thing that is really weird: i used our installer iso to boot
with 2.6.22 kernel and even after several hours the error did not
appear! can you explain that? so it only happens when filesystems are
mounted (also / partition is on that drive).
any idea?
Andreas
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: sata drive loosing connection/resetting port
2007-08-14 20:19 ` Andreas Radke
@ 2007-08-15 6:19 ` Tejun Heo
2007-08-15 13:48 ` Andreas Radke
0 siblings, 1 reply; 7+ messages in thread
From: Tejun Heo @ 2007-08-15 6:19 UTC (permalink / raw)
To: Andreas Radke
Cc: linux-kernel, Michal Piotrowski, Jeff Garzik,
IDE/ATA development list
Andreas Radke wrote:
> already tried different ports, several SATA cables on that mainboard and
> psu works well. the Samsung drive works well no matter where
> connected. never had any issues with the Raptor drive when it was
> connected to the "old" Intel P965 board before. what's the difference
> form ICH8 to ICH9R? any changes in how the driver works?
>
> i confirmed, that the issues still resist in kernel 2.6.23rc3 and also
> when using controller in "ide" mode together with ata_piix modul.
>
> but on thing that is really weird: i used our installer iso to boot
> with 2.6.22 kernel and even after several hours the error did not
> appear! can you explain that? so it only happens when filesystems are
> mounted (also / partition is on that drive).
>
> any idea?
Can you post full boot log and the result of 'lspci -nn'?
--
tejun
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: sata drive loosing connection/resetting port
2007-08-15 6:19 ` Tejun Heo
@ 2007-08-15 13:48 ` Andreas Radke
2007-08-16 10:53 ` Tejun Heo
0 siblings, 1 reply; 7+ messages in thread
From: Andreas Radke @ 2007-08-15 13:48 UTC (permalink / raw)
To: Tejun Heo
Cc: linux-kernel, Michal Piotrowski, Jeff Garzik,
IDE/ATA development list
[-- Attachment #1: Type: text/plain, Size: 2777 bytes --]
Am Wed, 15 Aug 2007 15:19:20 +0900
schrieb Tejun Heo <htejun@gmail.com>:
> Can you post full boot log and the result of 'lspci -nn'?
attached one logfile for ICH9R in AHCI mode and one for IDE mode.
[root@workstation64 andyrtr]# lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Unknown device [8086:29c0] (rev 02)
00:01.0 PCI bridge [0604]: Intel Corporation Unknown device [8086:29c1] (rev 02)
00:1a.0 USB Controller [0c03]: Intel Corporation Unknown device [8086:2937] (rev 02)
00:1a.1 USB Controller [0c03]: Intel Corporation Unknown device [8086:2938] (rev 02)
00:1a.2 USB Controller [0c03]: Intel Corporation Unknown device [8086:2939] (rev 02)
00:1a.7 USB Controller [0c03]: Intel Corporation Unknown device [8086:293c] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation Unknown device [8086:2940] (rev 02)
00:1c.4 PCI bridge [0604]: Intel Corporation Unknown device [8086:2948] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation Unknown device [8086:2934] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation Unknown device [8086:2935] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation Unknown device [8086:2936] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation Unknown device [8086:293a] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92)
00:1f.0 ISA bridge [0601]: Intel Corporation Unknown device [8086:2916] (rev 02)
00:1f.2 IDE interface [0101]: Intel Corporation Unknown device [8086:2920] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation Unknown device [8086:2930] (rev 02)
00:1f.5 IDE interface [0101]: Intel Corporation Unknown device [8086:2926] (rev 02)
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [GeForce 6200 TurboCache(TM)] [10de:0161] (rev a1)
03:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02)
03:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02)
04:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169SC Gigabit Ethernet [10ec:8167] (rev 10)
04:02.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023]
04:03.0 Network controller [0280]: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card [13d0:2103] (rev 02)
04:05.0 Multimedia audio controller [0401]: Creative Labs SB Audigy [1102:0004] (rev 03)
04:05.1 Input device controller [0980]: Creative Labs SB Audigy Game Port [1102:7003] (rev 03)
04:05.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB Audigy FireWire Port [1102:4001]
anything else? i'm thinking about changing the mainboard sata drive combination back.
but to fix it would be the better way.
Andy
[-- Attachment #2: ahci.log --]
[-- Type: text/x-log, Size: 63268 bytes --]
Aug 13 17:23:18 workstation64 syslog-ng[6162]: syslog-ng starting up; version='2.0.5'
Aug 13 17:23:18 workstation64 Linux version 2.6.22-ARCH (root@artin) (gcc version 4.2.1) #1 SMP PREEMPT Sun Aug 12 17:44:17 CEST 2007
Aug 13 17:23:18 workstation64 Command line: root=/dev/sda2 ro vga=794
Aug 13 17:23:18 workstation64 BIOS-provided physical RAM map:
Aug 13 17:23:18 workstation64 BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
Aug 13 17:23:18 workstation64 BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
Aug 13 17:23:18 workstation64 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Aug 13 17:23:18 workstation64 BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
Aug 13 17:23:18 workstation64 BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
Aug 13 17:23:18 workstation64 BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
Aug 13 17:23:18 workstation64 BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
Aug 13 17:23:18 workstation64 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Aug 13 17:23:18 workstation64 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Aug 13 17:23:18 workstation64 BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
Aug 13 17:23:18 workstation64 Entering add_active_range(0, 0, 158) 0 entries of 256 used
Aug 13 17:23:18 workstation64 Entering add_active_range(0, 256, 851680) 1 entries of 256 used
Aug 13 17:23:18 workstation64 Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
Aug 13 17:23:18 workstation64 end_pfn_map = 1245184
Aug 13 17:23:18 workstation64 DMI 2.5 present.
Aug 13 17:23:18 workstation64 ACPI: RSDP 000F7800, 0014 (r0 IntelR)
Aug 13 17:23:18 workstation64 ACPI: RSDT CFEE3000, 0034 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
Aug 13 17:23:18 workstation64 ACPI: FACP CFEE3080, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
Aug 13 17:23:18 workstation64 ACPI: DSDT CFEE3100, 4D0B (r1 INTELR AWRDACPI 1000 MSFT 3000000)
Aug 13 17:23:18 workstation64 ACPI: FACS CFEE0000, 0040
Aug 13 17:23:18 workstation64 ACPI: MCFG CFEE7F00, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
Aug 13 17:23:18 workstation64 ACPI: APIC CFEE7E40, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
Aug 13 17:23:18 workstation64 ACPI: SSDT CFEE8860, 0380 (r1 PmRef CpuPm 3000 INTL 20041203)
Aug 13 17:23:18 workstation64 Entering add_active_range(0, 0, 158) 0 entries of 256 used
Aug 13 17:23:18 workstation64 Entering add_active_range(0, 256, 851680) 1 entries of 256 used
Aug 13 17:23:18 workstation64 Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
Aug 13 17:23:18 workstation64 Zone PFN ranges:
Aug 13 17:23:18 workstation64 DMA 0 -> 4096
Aug 13 17:23:18 workstation64 DMA32 4096 -> 1048576
Aug 13 17:23:18 workstation64 Normal 1048576 -> 1245184
Aug 13 17:23:18 workstation64 early_node_map[3] active PFN ranges
Aug 13 17:23:18 workstation64 0: 0 -> 158
Aug 13 17:23:18 workstation64 0: 256 -> 851680
Aug 13 17:23:18 workstation64 0: 1048576 -> 1245184
Aug 13 17:23:18 workstation64 On node 0 totalpages: 1048190
Aug 13 17:23:18 workstation64 DMA zone: 56 pages used for memmap
Aug 13 17:23:18 workstation64 DMA zone: 1131 pages reserved
Aug 13 17:23:18 workstation64 DMA zone: 2811 pages, LIFO batch:0
Aug 13 17:23:18 workstation64 DMA32 zone: 14280 pages used for memmap
Aug 13 17:23:18 workstation64 DMA32 zone: 833304 pages, LIFO batch:31
Aug 13 17:23:18 workstation64 Normal zone: 2688 pages used for memmap
Aug 13 17:23:18 workstation64 Normal zone: 193920 pages, LIFO batch:31
Aug 13 17:23:18 workstation64 ACPI: PM-Timer IO Port: 0x408
Aug 13 17:23:18 workstation64 ACPI: Local APIC address 0xfee00000
Aug 13 17:23:18 workstation64 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Aug 13 17:23:18 workstation64 Processor #0 (Bootup-CPU)
Aug 13 17:23:18 workstation64 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled)
Aug 13 17:23:18 workstation64 Processor #3
Aug 13 17:23:18 workstation64 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Aug 13 17:23:18 workstation64 Processor #1
Aug 13 17:23:18 workstation64 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Aug 13 17:23:18 workstation64 Processor #2
Aug 13 17:23:18 workstation64 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Aug 13 17:23:18 workstation64 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Aug 13 17:23:18 workstation64 ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Aug 13 17:23:18 workstation64 ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Aug 13 17:23:18 workstation64 ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Aug 13 17:23:18 workstation64 IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
Aug 13 17:23:18 workstation64 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Aug 13 17:23:18 workstation64 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Aug 13 17:23:18 workstation64 ACPI: IRQ0 used by override.
Aug 13 17:23:18 workstation64 ACPI: IRQ2 used by override.
Aug 13 17:23:18 workstation64 ACPI: IRQ9 used by override.
Aug 13 17:23:18 workstation64 Setting APIC routing to flat
Aug 13 17:23:18 workstation64 Using ACPI (MADT) for SMP configuration information
Aug 13 17:23:18 workstation64 swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000
Aug 13 17:23:18 workstation64 swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
Aug 13 17:23:18 workstation64 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
Aug 13 17:23:18 workstation64 swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Aug 13 17:23:18 workstation64 swsusp: Registered nosave memory region: 00000000cfee0000 - 00000000cfee3000
Aug 13 17:23:18 workstation64 swsusp: Registered nosave memory region: 00000000cfee3000 - 00000000cfef0000
Aug 13 17:23:18 workstation64 swsusp: Registered nosave memory region: 00000000cfef0000 - 00000000cff00000
Aug 13 17:23:18 workstation64 swsusp: Registered nosave memory region: 00000000cff00000 - 00000000e0000000
Aug 13 17:23:18 workstation64 swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000
Aug 13 17:23:18 workstation64 swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000
Aug 13 17:23:18 workstation64 swsusp: Registered nosave memory region: 00000000fec00000 - 0000000100000000
Aug 13 17:23:18 workstation64 Allocating PCI resources starting at d0000000 (gap: cff00000:10100000)
Aug 13 17:23:18 workstation64 SMP: Allowing 4 CPUs, 0 hotplug CPUs
Aug 13 17:23:18 workstation64 PERCPU: Allocating 33800 bytes of per cpu data
Aug 13 17:23:18 workstation64 Built 1 zonelists. Total pages: 1030035
Aug 13 17:23:18 workstation64 Kernel command line: root=/dev/sda2 ro vga=794
Aug 13 17:23:18 workstation64 Initializing CPU#0
Aug 13 17:23:18 workstation64 PID hash table entries: 4096 (order: 12, 32768 bytes)
Aug 13 17:23:18 workstation64 time.c: Detected 3375.077 MHz processor.
Aug 13 17:23:18 workstation64 Console: colour dummy device 80x25
Aug 13 17:23:18 workstation64 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Aug 13 17:23:18 workstation64 Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Aug 13 17:23:18 workstation64 Checking aperture...
Aug 13 17:23:18 workstation64 Calgary: detecting Calgary via BIOS EBDA area
Aug 13 17:23:18 workstation64 Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Aug 13 17:23:18 workstation64 PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Aug 13 17:23:18 workstation64 Placing software IO TLB between 0x58d0000 - 0x98d0000
Aug 13 17:23:18 workstation64 Memory: 4046820k/4980736k available (2695k kernel code, 145528k reserved, 1008k data, 248k init)
Aug 13 17:23:18 workstation64 Calibrating delay using timer specific routine.. 6755.41 BogoMIPS (lpj=11255069)
Aug 13 17:23:18 workstation64 Security Framework v1.0.0 initialized
Aug 13 17:23:18 workstation64 Mount-cache hash table entries: 256
Aug 13 17:23:18 workstation64 CPU: L1 I cache: 32K, L1 D cache: 32K
Aug 13 17:23:18 workstation64 CPU: L2 cache: 4096K
Aug 13 17:23:18 workstation64 using mwait in idle threads.
Aug 13 17:23:18 workstation64 CPU: Physical Processor ID: 0
Aug 13 17:23:18 workstation64 CPU: Processor Core ID: 0
Aug 13 17:23:18 workstation64 CPU0: Thermal monitoring enabled (TM1)
Aug 13 17:23:18 workstation64 SMP alternatives: switching to UP code
Aug 13 17:23:18 workstation64 Early unpacking initramfs... done
Aug 13 17:23:18 workstation64 ACPI: Core revision 20070126
Aug 13 17:23:18 workstation64 ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Aug 13 17:23:18 workstation64 Using local APIC timer interrupts.
Aug 13 17:23:18 workstation64 result 23438017
Aug 13 17:23:18 workstation64 Detected 23.438 MHz APIC timer.
Aug 13 17:23:18 workstation64 SMP alternatives: switching to SMP code
Aug 13 17:23:18 workstation64 Booting processor 1/4 APIC 0x3
Aug 13 17:23:18 workstation64 Initializing CPU#1
Aug 13 17:23:18 workstation64 Calibrating delay using timer specific routine.. 6752.88 BogoMIPS (lpj=11249416)
Aug 13 17:23:18 workstation64 CPU: L1 I cache: 32K, L1 D cache: 32K
Aug 13 17:23:18 workstation64 CPU: L2 cache: 4096K
Aug 13 17:23:18 workstation64 CPU: Physical Processor ID: 0
Aug 13 17:23:18 workstation64 CPU: Processor Core ID: 3
Aug 13 17:23:18 workstation64 CPU1: Thermal monitoring enabled (TM1)
Aug 13 17:23:18 workstation64 Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
Aug 13 17:23:18 workstation64 checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Aug 13 17:23:18 workstation64 SMP alternatives: switching to SMP code
Aug 13 17:23:18 workstation64 Booting processor 2/4 APIC 0x1
Aug 13 17:23:18 workstation64 Initializing CPU#2
Aug 13 17:23:18 workstation64 Calibrating delay using timer specific routine.. 6752.90 BogoMIPS (lpj=11249451)
Aug 13 17:23:18 workstation64 CPU: L1 I cache: 32K, L1 D cache: 32K
Aug 13 17:23:18 workstation64 CPU: L2 cache: 4096K
Aug 13 17:23:18 workstation64 CPU: Physical Processor ID: 0
Aug 13 17:23:18 workstation64 CPU: Processor Core ID: 1
Aug 13 17:23:18 workstation64 CPU2: Thermal monitoring enabled (TM1)
Aug 13 17:23:18 workstation64 Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
Aug 13 17:23:18 workstation64 checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Aug 13 17:23:18 workstation64 SMP alternatives: switching to SMP code
Aug 13 17:23:18 workstation64 Booting processor 3/4 APIC 0x2
Aug 13 17:23:18 workstation64 Initializing CPU#3
Aug 13 17:23:18 workstation64 Calibrating delay using timer specific routine.. 6752.87 BogoMIPS (lpj=11249395)
Aug 13 17:23:18 workstation64 CPU: L1 I cache: 32K, L1 D cache: 32K
Aug 13 17:23:18 workstation64 CPU: L2 cache: 4096K
Aug 13 17:23:18 workstation64 CPU: Physical Processor ID: 0
Aug 13 17:23:18 workstation64 CPU: Processor Core ID: 2
Aug 13 17:23:18 workstation64 CPU3: Thermal monitoring enabled (TM1)
Aug 13 17:23:18 workstation64 Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
Aug 13 17:23:18 workstation64 checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Aug 13 17:23:18 workstation64 Brought up 4 CPUs
Aug 13 17:23:18 workstation64 migration_cost=14,2216
Aug 13 17:23:18 workstation64 NET: Registered protocol family 16
Aug 13 17:23:18 workstation64 ACPI: bus type pci registered
Aug 13 17:23:18 workstation64 PCI: Using MMCONFIG at e0000000 - efffffff
Aug 13 17:23:18 workstation64 ACPI: Interpreter enabled
Aug 13 17:23:18 workstation64 ACPI: (supports S0 S3 S4 S5)
Aug 13 17:23:18 workstation64 ACPI: Using IOAPIC for interrupt routing
Aug 13 17:23:18 workstation64 ACPI: PCI Root Bridge [PCI0] (0000:00)
Aug 13 17:23:18 workstation64 PCI: Probing PCI hardware (bus 00)
Aug 13 17:23:18 workstation64 PCI: Transparent bridge - 0000:00:1e.0
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 9 *10 11 12)
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 9 10 11 12) *0, disabled.
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 9 *10 11 12)
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 9 10 *11 12)
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 *7 9 10 11 12)
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt Link [LNKF] (IRQs *4 5 7 9 10 11 12)
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt Link [LNK0] (IRQs 4 *5 7 9 10 11 12)
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt Link [LNK1] (IRQs 4 5 7 9 10 *11 12)
Aug 13 17:23:18 workstation64 Linux Plug and Play Support v0.97 (c) Adam Belay
Aug 13 17:23:18 workstation64 pnp: PnP ACPI init
Aug 13 17:23:18 workstation64 ACPI: bus type pnp registered
Aug 13 17:23:18 workstation64 pnp: PnP ACPI: found 11 devices
Aug 13 17:23:18 workstation64 ACPI: ACPI bus type pnp unregistered
Aug 13 17:23:18 workstation64 SCSI subsystem initialized
Aug 13 17:23:18 workstation64 PCI: Using ACPI for IRQ routing
Aug 13 17:23:18 workstation64 PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Aug 13 17:23:18 workstation64 NetLabel: Initializing
Aug 13 17:23:18 workstation64 NetLabel: domain hash size = 128
Aug 13 17:23:18 workstation64 NetLabel: protocols = UNLABELED CIPSOv4
Aug 13 17:23:18 workstation64 NetLabel: unlabeled traffic allowed by default
Aug 13 17:23:18 workstation64 PCI-GART: No AMD northbridge found.
Aug 13 17:23:18 workstation64 ACPI: RTC can wake from S4
Aug 13 17:23:18 workstation64 pnp: 00:06: ioport range 0x400-0x4bf has been reserved
Aug 13 17:23:18 workstation64 pnp: 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
Aug 13 17:23:18 workstation64 pnp: 00:0a: iomem range 0xf0000-0xfffff could not be reserved
Aug 13 17:23:18 workstation64 pnp: 00:0a: iomem range 0xcff00000-0xcfffffff has been reserved
Aug 13 17:23:18 workstation64 pnp: 00:0a: iomem range 0xcfee0000-0xcfefffff could not be reserved
Aug 13 17:23:18 workstation64 pnp: 00:0a: iomem range 0x0-0x9ffff could not be reserved
Aug 13 17:23:18 workstation64 PCI: Bridge: 0000:00:01.0
Aug 13 17:23:18 workstation64 IO window: d000-dfff
Aug 13 17:23:18 workstation64 MEM window: fa000000-fcffffff
Aug 13 17:23:18 workstation64 PREFETCH window: d0000000-dfffffff
Aug 13 17:23:18 workstation64 PCI: Bridge: 0000:00:1c.0
Aug 13 17:23:18 workstation64 IO window: c000-cfff
Aug 13 17:23:18 workstation64 MEM window: fde00000-fdefffff
Aug 13 17:23:18 workstation64 PREFETCH window: fdb00000-fdbfffff
Aug 13 17:23:18 workstation64 PCI: Bridge: 0000:00:1c.4
Aug 13 17:23:18 workstation64 IO window: b000-bfff
Aug 13 17:23:18 workstation64 MEM window: fda00000-fdafffff
Aug 13 17:23:18 workstation64 PREFETCH window: fd900000-fd9fffff
Aug 13 17:23:18 workstation64 PCI: Bridge: 0000:00:1e.0
Aug 13 17:23:18 workstation64 IO window: a000-afff
Aug 13 17:23:18 workstation64 MEM window: fdd00000-fddfffff
Aug 13 17:23:18 workstation64 PREFETCH window: fdc00000-fdcfffff
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:00:01.0 to 64
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:00:1c.0 to 64
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:00:1c.4 to 64
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:00:1e.0 to 64
Aug 13 17:23:18 workstation64 NET: Registered protocol family 2
Aug 13 17:23:18 workstation64 Time: tsc clocksource has been installed.
Aug 13 17:23:18 workstation64 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Aug 13 17:23:18 workstation64 TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
Aug 13 17:23:18 workstation64 TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Aug 13 17:23:18 workstation64 TCP: Hash tables configured (established 131072 bind 65536)
Aug 13 17:23:18 workstation64 TCP reno registered
Aug 13 17:23:18 workstation64 checking if image is initramfs... it is
Aug 13 17:23:18 workstation64 Freeing initrd memory: 547k freed
Aug 13 17:23:18 workstation64 VFS: Disk quotas dquot_6.5.1
Aug 13 17:23:18 workstation64 Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Aug 13 17:23:18 workstation64 Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Aug 13 17:23:18 workstation64 io scheduler noop registered
Aug 13 17:23:18 workstation64 io scheduler anticipatory registered
Aug 13 17:23:18 workstation64 io scheduler deadline registered
Aug 13 17:23:18 workstation64 io scheduler cfq registered (default)
Aug 13 17:23:18 workstation64 Boot video device is 0000:01:00.0
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:00:01.0 to 64
Aug 13 17:23:18 workstation64 assign_interrupt_mode Found MSI capability
Aug 13 17:23:18 workstation64 Allocate Port Service[0000:00:01.0:pcie00]
Aug 13 17:23:18 workstation64 Allocate Port Service[0000:00:01.0:pcie03]
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:00:1c.0 to 64
Aug 13 17:23:18 workstation64 assign_interrupt_mode Found MSI capability
Aug 13 17:23:18 workstation64 Allocate Port Service[0000:00:1c.0:pcie00]
Aug 13 17:23:18 workstation64 Allocate Port Service[0000:00:1c.0:pcie02]
Aug 13 17:23:18 workstation64 Allocate Port Service[0000:00:1c.0:pcie03]
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:00:1c.4 to 64
Aug 13 17:23:18 workstation64 assign_interrupt_mode Found MSI capability
Aug 13 17:23:18 workstation64 Allocate Port Service[0000:00:1c.4:pcie00]
Aug 13 17:23:18 workstation64 Allocate Port Service[0000:00:1c.4:pcie02]
Aug 13 17:23:18 workstation64 Allocate Port Service[0000:00:1c.4:pcie03]
Aug 13 17:23:18 workstation64 vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010100000, using 5120k, total 131072k
Aug 13 17:23:18 workstation64 vesafb: mode is 1280x1024x16, linelength=2560, pages=1
Aug 13 17:23:18 workstation64 vesafb: scrolling: redraw
Aug 13 17:23:18 workstation64 vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Aug 13 17:23:18 workstation64 Console: switching to colour frame buffer device 160x64
Aug 13 17:23:18 workstation64 fb0: VESA VGA frame buffer device
Aug 13 17:23:18 workstation64 Real Time Clock Driver v1.12ac
Aug 13 17:23:18 workstation64 Linux agpgart interface v0.102 (c) Dave Jones
Aug 13 17:23:18 workstation64 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Aug 13 17:23:18 workstation64 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Aug 13 17:23:18 workstation64 loop: module loaded
Aug 13 17:23:18 workstation64 input: Macintosh mouse button emulation as /class/input/input0
Aug 13 17:23:18 workstation64 PNP: No PS/2 controller found. Probing ports directly.
Aug 13 17:23:18 workstation64 serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 13 17:23:18 workstation64 serio: i8042 AUX port at 0x60,0x64 irq 12
Aug 13 17:23:18 workstation64 mice: PS/2 mouse device common for all mice
Aug 13 17:23:18 workstation64 TCP cubic registered
Aug 13 17:23:18 workstation64 NET: Registered protocol family 1
Aug 13 17:23:18 workstation64 NET: Registered protocol family 17
Aug 13 17:23:18 workstation64 Freeing unused kernel memory: 248k freed
Aug 13 17:23:18 workstation64 libata version 2.21 loaded.
Aug 13 17:23:18 workstation64 ahci 0000:00:1f.2: version 2.2
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
Aug 13 17:23:18 workstation64 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
Aug 13 17:23:18 workstation64 ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:00:1f.2 to 64
Aug 13 17:23:18 workstation64 scsi0 : ahci
Aug 13 17:23:18 workstation64 scsi1 : ahci
Aug 13 17:23:18 workstation64 scsi2 : ahci
Aug 13 17:23:18 workstation64 scsi3 : ahci
Aug 13 17:23:18 workstation64 scsi4 : ahci
Aug 13 17:23:18 workstation64 scsi5 : ahci
Aug 13 17:23:18 workstation64 ata1: SATA max UDMA/133 cmd 0xffffc2000000c100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
Aug 13 17:23:18 workstation64 ata2: SATA max UDMA/133 cmd 0xffffc2000000c180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
Aug 13 17:23:18 workstation64 ata3: SATA max UDMA/133 cmd 0xffffc2000000c200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
Aug 13 17:23:18 workstation64 ata4: SATA max UDMA/133 cmd 0xffffc2000000c280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
Aug 13 17:23:18 workstation64 ata5: SATA max UDMA/133 cmd 0xffffc2000000c300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
Aug 13 17:23:18 workstation64 ata6: SATA max UDMA/133 cmd 0xffffc2000000c380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
Aug 13 17:23:18 workstation64 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 13 17:23:18 workstation64 ata1.00: ATA-7: WDC WD740ADFD-00NLR1, 20.07P20, max UDMA/133
Aug 13 17:23:18 workstation64 ata1.00: 145226112 sectors, multi 0: LBA48 NCQ (not used)
Aug 13 17:23:18 workstation64 ata1.00: configured for UDMA/133
Aug 13 17:23:18 workstation64 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Aug 13 17:23:18 workstation64 ata2.00: ATA-7: SAMSUNG HD401LJ, ZZ100-15, max UDMA7
Aug 13 17:23:18 workstation64 ata2.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32)
Aug 13 17:23:18 workstation64 ata2.00: configured for UDMA/133
Aug 13 17:23:18 workstation64 ata3: SATA link down (SStatus 0 SControl 300)
Aug 13 17:23:18 workstation64 ata4: SATA link down (SStatus 0 SControl 300)
Aug 13 17:23:18 workstation64 ata5: SATA link down (SStatus 0 SControl 300)
Aug 13 17:23:18 workstation64 ata6: SATA link down (SStatus 0 SControl 300)
Aug 13 17:23:18 workstation64 scsi 0:0:0:0: Direct-Access ATA WDC WD740ADFD-00 20.0 PQ: 0 ANSI: 5
Aug 13 17:23:18 workstation64 scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD401LJ ZZ10 PQ: 0 ANSI: 5
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Aug 13 17:23:18 workstation64 ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
Aug 13 17:23:18 workstation64 ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:03:00.0 to 64
Aug 13 17:23:18 workstation64 scsi6 : ahci
Aug 13 17:23:18 workstation64 scsi7 : ahci
Aug 13 17:23:18 workstation64 ata7: SATA max UDMA/133 cmd 0xffffc20000010100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
Aug 13 17:23:18 workstation64 ata8: SATA max UDMA/133 cmd 0xffffc20000010180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
Aug 13 17:23:18 workstation64 ata7: SATA link down (SStatus 0 SControl 300)
Aug 13 17:23:18 workstation64 ata8: SATA link down (SStatus 0 SControl 300)
Aug 13 17:23:18 workstation64 sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
Aug 13 17:23:18 workstation64 sd 0:0:0:0: [sda] Write Protect is off
Aug 13 17:23:18 workstation64 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 13 17:23:18 workstation64 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 17:23:18 workstation64 sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
Aug 13 17:23:18 workstation64 sd 0:0:0:0: [sda] Write Protect is off
Aug 13 17:23:18 workstation64 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 13 17:23:18 workstation64 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 17:23:18 workstation64 sda: sda1 sda2 sda3
Aug 13 17:23:18 workstation64 sd 0:0:0:0: [sda] Attached SCSI disk
Aug 13 17:23:18 workstation64 sd 1:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
Aug 13 17:23:18 workstation64 sd 1:0:0:0: [sdb] Write Protect is off
Aug 13 17:23:18 workstation64 sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Aug 13 17:23:18 workstation64 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 17:23:18 workstation64 sd 1:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
Aug 13 17:23:18 workstation64 sd 1:0:0:0: [sdb] Write Protect is off
Aug 13 17:23:18 workstation64 sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Aug 13 17:23:18 workstation64 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 17:23:18 workstation64 sdb: sdb1
Aug 13 17:23:18 workstation64 sd 1:0:0:0: [sdb] Attached SCSI disk
Aug 13 17:23:18 workstation64 ReiserFS: sda2: found reiserfs format "3.6" with standard journal
Aug 13 17:23:18 workstation64 ReiserFS: sda2: using ordered data mode
Aug 13 17:23:18 workstation64 ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Aug 13 17:23:18 workstation64 ReiserFS: sda2: checking transaction log (sda2)
Aug 13 17:23:18 workstation64 ReiserFS: sda2: replayed 116 transactions in 1 seconds
Aug 13 17:23:18 workstation64 ReiserFS: sda2: Using r5 hash to sort names
Aug 13 17:23:18 workstation64 usbcore: registered new interface driver usbfs
Aug 13 17:23:18 workstation64 usbcore: registered new interface driver hub
Aug 13 17:23:18 workstation64 usbcore: registered new device driver usb
Aug 13 17:23:18 workstation64 coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong!
Aug 13 17:23:18 workstation64 coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong!
Aug 13 17:23:18 workstation64 coretemp coretemp.2: Using undocumented features, absolute temperature might be wrong!
Aug 13 17:23:18 workstation64 coretemp coretemp.3: Using undocumented features, absolute temperature might be wrong!
Aug 13 17:23:18 workstation64 input: Power Button (FF) as /class/input/input1
Aug 13 17:23:18 workstation64 ACPI: Power Button (FF) [PWRF]
Aug 13 17:23:18 workstation64 input: Power Button (CM) as /class/input/input2
Aug 13 17:23:18 workstation64 ACPI: Power Button (CM) [PWRB]
Aug 13 17:23:18 workstation64 ACPI: SSDT CFEE7F80, 022A (r1 PmRef Cpu0Ist 3000 INTL 20041203)
Aug 13 17:23:18 workstation64 ACPI: SSDT CFEE8440, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20041203)
Aug 13 17:23:18 workstation64 ACPI: SSDT CFEE85A0, 0152 (r1 PmRef Cpu2Ist 3000 INTL 20041203)
Aug 13 17:23:18 workstation64 ACPI: SSDT CFEE8700, 0152 (r1 PmRef Cpu3Ist 3000 INTL 20041203)
Aug 13 17:23:18 workstation64 ACPI Error (dswstate-0226): No result objects! State=ffff81012f884400 [20070126]
Aug 13 17:23:18 workstation64 ACPI Exception (dsutils-0642): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070126]
Aug 13 17:23:18 workstation64 ACPI Exception (dsutils-0735): AE_AML_NO_RETURN_VALUE, While creating Arg 1 [20070126]
Aug 13 17:23:18 workstation64 ACPI Error (psparse-0537): Method parse/execution failed [\_TZ_.THRM._TMP] (Node ffff81012fe20750), AE_AML_NO_RETURN_VALUE
Aug 13 17:23:18 workstation64 USB Universal Host Controller Interface driver v3.0
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:00:1a.0 to 64
Aug 13 17:23:18 workstation64 uhci_hcd 0000:00:1a.0: UHCI Host Controller
Aug 13 17:23:18 workstation64 uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Aug 13 17:23:18 workstation64 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
Aug 13 17:23:18 workstation64 usb usb1: configuration #1 chosen from 1 choice
Aug 13 17:23:18 workstation64 hub 1-0:1.0: USB hub found
Aug 13 17:23:18 workstation64 hub 1-0:1.0: 2 ports detected
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:00:1a.1 to 64
Aug 13 17:23:18 workstation64 uhci_hcd 0000:00:1a.1: UHCI Host Controller
Aug 13 17:23:18 workstation64 uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
Aug 13 17:23:18 workstation64 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
Aug 13 17:23:18 workstation64 usb usb2: configuration #1 chosen from 1 choice
Aug 13 17:23:18 workstation64 hub 2-0:1.0: USB hub found
Aug 13 17:23:18 workstation64 hub 2-0:1.0: 2 ports detected
Aug 13 17:23:18 workstation64 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Aug 13 17:23:18 workstation64 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Aug 13 17:23:18 workstation64 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Aug 13 17:23:18 workstation64 rtc_cmos: probe of 00:03 failed with error -16
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 19
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:00:1a.2 to 64
Aug 13 17:23:18 workstation64 uhci_hcd 0000:00:1a.2: UHCI Host Controller
Aug 13 17:23:18 workstation64 uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
Aug 13 17:23:18 workstation64 uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fd00
Aug 13 17:23:18 workstation64 usb usb3: configuration #1 chosen from 1 choice
Aug 13 17:23:18 workstation64 hub 3-0:1.0: USB hub found
Aug 13 17:23:18 workstation64 hub 3-0:1.0: 2 ports detected
Aug 13 17:23:18 workstation64 input: PC Speaker as /class/input/input3
Aug 13 17:23:18 workstation64 b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:00:1d.0 to 64
Aug 13 17:23:18 workstation64 uhci_hcd 0000:00:1d.0: UHCI Host Controller
Aug 13 17:23:18 workstation64 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
Aug 13 17:23:18 workstation64 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
Aug 13 17:23:18 workstation64 usb usb4: configuration #1 chosen from 1 choice
Aug 13 17:23:18 workstation64 hub 4-0:1.0: USB hub found
Aug 13 17:23:18 workstation64 hub 4-0:1.0: 2 ports detected
Aug 13 17:23:18 workstation64 usb 1-1: new full speed USB device using uhci_hcd and address 2
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:00:1d.1 to 64
Aug 13 17:23:18 workstation64 uhci_hcd 0000:00:1d.1: UHCI Host Controller
Aug 13 17:23:18 workstation64 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
Aug 13 17:23:18 workstation64 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
Aug 13 17:23:18 workstation64 usb usb5: configuration #1 chosen from 1 choice
Aug 13 17:23:18 workstation64 hub 5-0:1.0: USB hub found
Aug 13 17:23:18 workstation64 hub 5-0:1.0: 2 ports detected
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:00:1d.2 to 64
Aug 13 17:23:18 workstation64 uhci_hcd 0000:00:1d.2: UHCI Host Controller
Aug 13 17:23:18 workstation64 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
Aug 13 17:23:18 workstation64 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
Aug 13 17:23:18 workstation64 usb usb6: configuration #1 chosen from 1 choice
Aug 13 17:23:18 workstation64 hub 6-0:1.0: USB hub found
Aug 13 17:23:18 workstation64 hub 6-0:1.0: 2 ports detected
Aug 13 17:23:18 workstation64 usb 1-1: configuration #1 chosen from 1 choice
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:00:1a.7 to 64
Aug 13 17:23:18 workstation64 ehci_hcd 0000:00:1a.7: EHCI Host Controller
Aug 13 17:23:18 workstation64 ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
Aug 13 17:23:18 workstation64 PCI: cache line size of 32 is not supported by device 0000:00:1a.7
Aug 13 17:23:18 workstation64 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
Aug 13 17:23:18 workstation64 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Aug 13 17:23:18 workstation64 usb usb7: configuration #1 chosen from 1 choice
Aug 13 17:23:18 workstation64 hub 7-0:1.0: USB hub found
Aug 13 17:23:18 workstation64 hub 7-0:1.0: 6 ports detected
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 21
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:04:02.0 to 64
Aug 13 17:23:18 workstation64 JMB363: IDE controller at PCI slot 0000:03:00.1
Aug 13 17:23:18 workstation64 PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
Aug 13 17:23:18 workstation64 JMB363: chipset revision 2
Aug 13 17:23:18 workstation64 JMB363: 100% native mode on irq 17
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:03:00.1 to 64
Aug 13 17:23:18 workstation64 ide0: BM-DMA at 0xbb00-0xbb07, BIOS settings: hda:pio, hdb:pio
Aug 13 17:23:18 workstation64 ide1: BM-DMA at 0xbb08-0xbb0f, BIOS settings: hdc:pio, hdd:pio
Aug 13 17:23:18 workstation64 Probing IDE interface ide0...
Aug 13 17:23:18 workstation64 gameport: EMU10K1 is pci0000:04:05.1/gameport0, io 0xad00, speed 1041kHz
Aug 13 17:23:18 workstation64 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fddfe000-fddfe7ff] Max Packet=[2048] IR/IT contexts=[4/8]
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt 0000:04:05.2[B] -> GSI 21 (level, low) -> IRQ 21
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt 0000:00:1f.3[B] -> <7>PCI: Setting latency timer of device 0000:04:05.2 to 64
Aug 13 17:23:18 workstation64 GSI 18 (level, low) -> IRQ 18
Aug 13 17:23:18 workstation64 ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fddfd000-fddfd7ff] Max Packet=[2048] IR/IT contexts=[4/8]
Aug 13 17:23:18 workstation64 hda: HDS722525VLAT80, ATA DISK drive
Aug 13 17:23:18 workstation64 hdb: HL-DT-ST DVDRAM GSA-4160B, ATAPI CD/DVD-ROM drive
Aug 13 17:23:18 workstation64 usb 1-1: USB disconnect, address 2
Aug 13 17:23:18 workstation64 hda: selected mode 0x45
Aug 13 17:23:18 workstation64 hdb: selected mode 0x44
Aug 13 17:23:18 workstation64 ide0 at 0xbf00-0xbf07,0xbe02 on irq 17
Aug 13 17:23:18 workstation64 Probing IDE interface ide1...
Aug 13 17:23:18 workstation64 usb 1-1: new full speed USB device using uhci_hcd and address 3
Aug 13 17:23:18 workstation64 usb 1-1: configuration #1 chosen from 1 choice
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:00:1d.7 to 64
Aug 13 17:23:18 workstation64 ehci_hcd 0000:00:1d.7: EHCI Host Controller
Aug 13 17:23:18 workstation64 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
Aug 13 17:23:18 workstation64 PCI: cache line size of 32 is not supported by device 0000:00:1d.7
Aug 13 17:23:18 workstation64 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
Aug 13 17:23:18 workstation64 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Aug 13 17:23:18 workstation64 usb usb8: configuration #1 chosen from 1 choice
Aug 13 17:23:18 workstation64 hub 8-0:1.0: USB hub found
Aug 13 17:23:18 workstation64 hub 8-0:1.0: 6 ports detected
Aug 13 17:23:18 workstation64 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00508d000099f7ea]
Aug 13 17:23:18 workstation64 r8169 Gigabit Ethernet driver 2.2LK loaded
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 22 (level, low) -> IRQ 22
Aug 13 17:23:18 workstation64 eth0: RTL8169sc/8110sc at 0xffffc20000054000, 00:50:8d:9f:9a:05, IRQ 22
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 20 (level, low) -> IRQ 20
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:04:05.0 to 64
Aug 13 17:23:18 workstation64 usb 2-1: new low speed USB device using uhci_hcd and address 2
Aug 13 17:23:18 workstation64 flexcop-pci: will use the HW PID filter.
Aug 13 17:23:18 workstation64 flexcop-pci: card revision 2
Aug 13 17:23:18 workstation64 ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 22 (level, low) -> IRQ 22
Aug 13 17:23:18 workstation64 PCI: Setting latency timer of device 0000:04:03.0 to 64
Aug 13 17:23:18 workstation64 DVB: registering new adapter (FlexCop Digital TV device).
Aug 13 17:23:18 workstation64 b2c2-flexcop: MAC address = 00:d0:d7:0d:0d:9e
Aug 13 17:23:18 workstation64 Linux video capture interface: v2.00
Aug 13 17:23:18 workstation64 ieee1394: The root node is not cycle master capable; selecting a new root node and resetting...
Aug 13 17:23:18 workstation64 usb 2-1: configuration #1 chosen from 1 choice
Aug 13 17:23:18 workstation64 b2c2-flexcop: found the stv0299 at i2c address: 0x68
Aug 13 17:23:18 workstation64 DVB: registering frontend 0 (ST STV0299 DVB-S)...
Aug 13 17:23:18 workstation64 b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Aug 13 17:23:18 workstation64 hda: max request size: 512KiB
Aug 13 17:23:18 workstation64 hda: Host Protected Area detected.
Aug 13 17:23:18 workstation64 current capacity is 488395055 sectors (250058 MB)
Aug 13 17:23:18 workstation64 native capacity is 488397168 sectors (250059 MB)
Aug 13 17:23:18 workstation64 hda: Host Protected Area disabled.
Aug 13 17:23:18 workstation64 hda: 488397168 sectors (250059 MB) w/7938KiB Cache, CHS=30401/255/63, UDMA(100)
Aug 13 17:23:18 workstation64 hda: cache flushes supported
Aug 13 17:23:18 workstation64 hda: hda1
Aug 13 17:23:18 workstation64 hdb: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
Aug 13 17:23:18 workstation64 Uniform CD-ROM driver Revision: 3.20
Aug 13 17:23:18 workstation64 usb 2-2: new low speed USB device using uhci_hcd and address 3
Aug 13 17:23:18 workstation64 ieee1394: Host added: ID:BUS[1-01:1023] GUID[00023c0021039053]
Aug 13 17:23:18 workstation64 usb 2-2: configuration #1 chosen from 1 choice
Aug 13 17:23:18 workstation64 usb 2-1: USB disconnect, address 2
Aug 13 17:23:18 workstation64 drivers/media/video/stv680.c: [stv680_probe:1422] STV(i): STV0680 camera found.
Aug 13 17:23:18 workstation64 drivers/media/video/stv680.c: [stv680_probe:1462] STV(i): registered new video device: video0
Aug 13 17:23:18 workstation64 usbcore: registered new interface driver stv680
Aug 13 17:23:18 workstation64 drivers/media/video/stv680.c: [usb_stv680_init:1543] STV(i): usb camera driver version v0.25 registering
Aug 13 17:23:18 workstation64 drivers/media/video/stv680.c: STV0680 USB Camera Driver v0.25
Aug 13 17:23:18 workstation64 usbcore: registered new interface driver hiddev
Aug 13 17:23:18 workstation64 input: Logitech USB RECEIVER as /class/input/input4
Aug 13 17:23:18 workstation64 input: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1a.1-2
Aug 13 17:23:18 workstation64 usbcore: registered new interface driver usbhid
Aug 13 17:23:18 workstation64 drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Aug 13 17:23:18 workstation64 usb 2-1: new low speed USB device using uhci_hcd and address 4
Aug 13 17:23:18 workstation64 usb 2-1: configuration #1 chosen from 1 choice
Aug 13 17:23:18 workstation64 input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input5
Aug 13 17:23:18 workstation64 input: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1a.1-1
Aug 13 17:23:18 workstation64 input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input6
Aug 13 17:23:18 workstation64 input: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1a.1-1
Aug 13 17:23:18 workstation64 ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x2 frozen
Aug 13 17:23:18 workstation64 ata1.00: (irq_stat 0x08000000, interface fatal error)
Aug 13 17:23:18 workstation64 ata1.00: cmd ca/00:08:38:33:0f/00:00:00:00:00/e6 tag 0 cdb 0x0 data 4096 out
Aug 13 17:23:18 workstation64 res 50/00:00:ef:af:1f/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)
Aug 13 17:23:18 workstation64 ata1: soft resetting port
Aug 13 17:23:18 workstation64 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 13 17:23:18 workstation64 ata1.00: configured for UDMA/133
Aug 13 17:23:18 workstation64 ata1: EH complete
Aug 13 17:23:18 workstation64 sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
Aug 13 17:23:18 workstation64 sd 0:0:0:0: [sda] Write Protect is off
Aug 13 17:23:18 workstation64 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 13 17:23:18 workstation64 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 17:23:18 workstation64 ReiserFS: sda2: Removing [7282282 7282121 0x0 SD]..done
Aug 13 17:23:18 workstation64 ReiserFS: sda2: Removing [7143704 7144671 0x0 SD]..done
Aug 13 17:23:18 workstation64 ReiserFS: sda2: Removing [2 7206 0x0 SD]..done
Aug 13 17:23:18 workstation64 ReiserFS: sda2: Removing [2 5708 0x0 SD]..done
Aug 13 17:23:18 workstation64 ReiserFS: sda2: There were 4 uncompleted unlinks/truncates. Completed
Aug 13 17:23:18 workstation64 ReiserFS: sda3: found reiserfs format "3.6" with standard journal
Aug 13 17:23:18 workstation64 ReiserFS: sda3: using ordered data mode
Aug 13 17:23:18 workstation64 ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Aug 13 17:23:18 workstation64 ReiserFS: sda3: checking transaction log (sda3)
Aug 13 17:23:18 workstation64 ReiserFS: sda3: Using r5 hash to sort names
Aug 13 17:23:18 workstation64 ReiserFS: sdb1: found reiserfs format "3.6" with standard journal
Aug 13 17:23:18 workstation64 ReiserFS: sdb1: using ordered data mode
Aug 13 17:23:18 workstation64 ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Aug 13 17:23:18 workstation64 ReiserFS: sdb1: checking transaction log (sdb1)
Aug 13 17:23:18 workstation64 ReiserFS: sdb1: Using r5 hash to sort names
Aug 13 17:23:18 workstation64 Adding 2000052k swap on /dev/sda1. Priority:-1 extents:1 across:2000052k
Aug 13 17:23:18 workstation64 r8169: eth0: link up
Aug 13 17:23:18 workstation64 ntpd[6200]: ntpd 4.2.4p3@1.1502-o Tue Jul 3 17:33:51 UTC 2007 (1)
Aug 13 17:23:18 workstation64 ntpd[6205]: precision = 1.000 usec
Aug 13 17:23:18 workstation64 NET: Registered protocol family 10
Aug 13 17:23:18 workstation64 lo: Disabled Privacy Extensions
Aug 13 17:23:18 workstation64 Mobile IPv6
Aug 13 17:23:18 workstation64 ntpd[6205]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
Aug 13 17:23:18 workstation64 ntpd[6205]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Aug 13 17:23:18 workstation64 ntpd[6205]: Listening on interface #1 wildcard, ::#123 Disabled
Aug 13 17:23:18 workstation64 ntpd[6205]: Listening on interface #2 lo, ::1#123 Enabled
Aug 13 17:23:18 workstation64 ntpd[6205]: bind() fd 19, family 10, port 123, scope 2, addr fe80::250:8dff:fe9f:9a05, in6_is_addr_multicast=0 flags=0x11 fails: Cannot assign requested address
Aug 13 17:23:18 workstation64 ntpd[6205]: unable to create socket on eth0 (3) for fe80::250:8dff:fe9f:9a05#123
Aug 13 17:23:18 workstation64 ntpd[6205]: failed to initialize interface for address fe80::250:8dff:fe9f:9a05
Aug 13 17:23:18 workstation64 ntpd[6205]: Listening on interface #4 lo, 127.0.0.1#123 Enabled
Aug 13 17:23:18 workstation64 ntpd[6205]: Listening on interface #5 eth0, 192.168.0.2#123 Enabled
Aug 13 17:23:18 workstation64 ntpd[6205]: kernel time sync status 0040
Aug 13 17:23:19 workstation64 ntpd[6205]: frequency initialized 90.799 PPM from /var/lib/ntp/ntp.drift
Aug 13 17:23:19 workstation64 ntpd[6205]: bind() fd 21, family 10, port 123, scope 2, addr fe80::250:8dff:fe9f:9a05, in6_is_addr_multicast=0 flags=0x11 fails: Cannot assign requested address
Aug 13 17:23:19 workstation64 ntpd[6205]: unable to create socket on eth0 (6) for fe80::250:8dff:fe9f:9a05#123
Aug 13 17:23:19 workstation64 ntpd[6205]: failed to initialize interface for address fe80::250:8dff:fe9f:9a05
Aug 13 17:23:21 workstation64 acpid: starting up
Aug 13 17:23:21 workstation64 acpid: 1 rule loaded
Aug 13 17:23:22 workstation64 acpid: client connected from 6303[82:82]
Aug 13 17:23:22 workstation64 acpid: 1 client rule loaded
Aug 13 17:23:22 workstation64 clamd[6335]: clamd daemon 0.91.1 (OS: linux-gnu, ARCH: x86_64, CPU: x86_64)
Aug 13 17:23:22 workstation64 clamd[6335]: Running as user clamav (UID 64, GID 64)
Aug 13 17:23:22 workstation64 clamd[6335]: Log file size limited to 2097152 bytes.
Aug 13 17:23:22 workstation64 clamd[6335]: Reading databases from /var/lib/clamav
Aug 13 17:23:23 workstation64 postfix/postfix-script[6377]: starting the Postfix mail system
Aug 13 17:23:23 workstation64 clamd[6335]: Loaded 145915 signatures.
Aug 13 17:23:23 workstation64 clamd[6335]: Socket file /var/lib/clamav/clamd.sock exists. Unclean shutdown? Removing...
Aug 13 17:23:23 workstation64 clamd[6335]: Unix socket file /var/lib/clamav/clamd.sock
Aug 13 17:23:23 workstation64 clamd[6335]: Setting connection queue length to 15
Aug 13 17:23:23 workstation64 clamd[6335]: Archive: Archived file size limit set to 524288000 bytes.
Aug 13 17:23:23 workstation64 clamd[6335]: Archive: Recursion level limit set to 8.
Aug 13 17:23:23 workstation64 clamd[6335]: Archive: Files limit set to 1000.
Aug 13 17:23:23 workstation64 clamd[6335]: Archive: Compression ratio limit set to 250.
Aug 13 17:23:23 workstation64 clamd[6335]: Archive support enabled.
Aug 13 17:23:23 workstation64 clamd[6335]: Algorithmic detection enabled.
Aug 13 17:23:23 workstation64 clamd[6335]: Portable Executable support enabled.
Aug 13 17:23:23 workstation64 clamd[6335]: ELF support enabled.
Aug 13 17:23:23 workstation64 clamd[6335]: Mail files support enabled.
Aug 13 17:23:23 workstation64 clamd[6335]: Mail: Recursion level limit set to 64.
Aug 13 17:23:23 workstation64 clamd[6335]: OLE2 support enabled.
Aug 13 17:23:23 workstation64 clamd[6335]: PDF support enabled.
Aug 13 17:23:23 workstation64 clamd[6335]: HTML support enabled.
Aug 13 17:23:23 workstation64 clamd[6335]: Self checking every 1800 seconds.
Aug 13 17:23:23 workstation64 postfix/master[6378]: daemon started -- version 2.4.3, configuration /etc/postfix
Aug 13 17:23:23 workstation64 freshclam[6383]: freshclam daemon 0.91.1 (OS: linux-gnu, ARCH: x86_64, CPU: x86_64)
Aug 13 17:23:23 workstation64 freshclam[6383]: ClamAV update process started at Mon Aug 13 17:23:23 2007
Aug 13 17:23:23 workstation64 freshclam[6383]: main.inc is up to date (version: 44, sigs: 133163, f-level: 20, builder: sven)
Aug 13 17:23:24 workstation64 freshclam[6383]: Downloading daily-3945.cdiff [100%]
Aug 13 17:23:24 workstation64 freshclam[6383]: Downloading daily-3946.cdiff [100%]
Aug 13 17:23:24 workstation64 freshclam[6383]: daily.inc updated (version: 3946, sigs: 12761, f-level: 20, builder: ccordes)
Aug 13 17:23:24 workstation64 freshclam[6383]: Database updated (145924 signatures) from database.clamav.net (IP: 217.160.141.39)
Aug 13 17:23:24 workstation64 freshclam[6383]: Clamd successfully notified about the update.
Aug 13 17:23:24 workstation64 freshclam[6383]: --------------------------------------
Aug 13 17:23:24 workstation64 acpid: client connected from 6408[0:0]
Aug 13 17:23:24 workstation64 acpid: 1 client rule loaded
Aug 13 17:23:25 workstation64 nvidia: module license 'NVIDIA' taints kernel.
Aug 13 17:23:25 workstation64 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Aug 13 17:23:25 workstation64 PCI: Setting latency timer of device 0000:01:00.0 to 64
Aug 13 17:23:25 workstation64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.11 Wed Jun 13 16:33:22 PDT 2007
Aug 13 17:23:26 workstation64 acpid: client connected from 6408[0:0]
Aug 13 17:23:26 workstation64 acpid: 1 client rule loaded
Aug 13 17:23:27 workstation64 drivers/media/video/stv680.c: [stv_init:374] STV(i): CIF is supported
Aug 13 17:23:27 workstation64 drivers/media/video/stv680.c: [stv_init:392] STV(i): Camera has 0 pictures.
Aug 13 17:23:27 workstation64 drivers/media/video/stv680.c: [stv_init:419] STV(i): Video Mode set to CIF
Aug 13 17:23:28 workstation64 drivers/media/video/stv680.c: [stv_stop_video:247] STV(e): Stop_video: problem setting original mode
Aug 13 17:23:28 workstation64 eth0: no IPv6 routers present
Aug 13 17:26:32 workstation64 ntpd[6205]: synchronized to 212.82.32.26, stratum 2
Aug 13 17:26:32 workstation64 ntpd[6205]: kernel time sync status change 0001
Aug 13 17:28:19 workstation64 ntpd[6205]: Listening on interface #7 eth0, fe80::250:8dff:fe9f:9a05#123 Enabled
Aug 13 17:33:18 workstation64 syslog-ng[6162]: Log statistics; processed='center(queued)=2312', processed='center(received)=607', processed='destination(console)=0', processed='destination(mail)=11', processed='destination(user)=0', processed='destination(uucp)=0', processed='destination(messages)=510', processed='destination(news)=0', processed='destination(iptables)=0', processed='destination(everything)=603', processed='destination(lpr)=0', processed='destination(cron)=0', processed='destination(syslog)=1', processed='destination(authlog)=4', processed='destination(errors)=7', processed='destination(kernel)=542', processed='destination(daemon)=27', processed='destination(console_all)=607', processed='source(src)=607'
Aug 13 17:36:05 workstation64 ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x2 frozen
Aug 13 17:36:05 workstation64 ata1.00: (irq_stat 0x08000000, interface fatal error)
Aug 13 17:36:05 workstation64 ata1.00: cmd 35/00:08:a9:ea:3d/00:02:00:00:00/e0 tag 0 cdb 0x0 data 266240 out
Aug 13 17:36:05 workstation64 res 50/00:00:67:ac:0f/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
Aug 13 17:36:05 workstation64 ata1: soft resetting port
Aug 13 17:36:05 workstation64 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 13 17:36:05 workstation64 ata1.00: configured for UDMA/133
Aug 13 17:36:05 workstation64 ata1: EH complete
Aug 13 17:36:05 workstation64 sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
Aug 13 17:36:05 workstation64 sd 0:0:0:0: [sda] Write Protect is off
Aug 13 17:36:05 workstation64 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 13 17:36:05 workstation64 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 17:37:23 workstation64 ntpd[6205]: synchronized to 141.82.30.251, stratum 2
Aug 13 17:42:34 workstation64 ntpd[6205]: synchronized to 212.82.32.26, stratum 2
Aug 13 17:43:18 workstation64 syslog-ng[6162]: Log statistics; processed='center(queued)=2370', processed='center(received)=622', processed='destination(console)=0', processed='destination(mail)=11', processed='destination(user)=0', processed='destination(uucp)=0', processed='destination(messages)=520', processed='destination(news)=0', processed='destination(iptables)=0', processed='destination(everything)=618', processed='destination(lpr)=0', processed='destination(cron)=0', processed='destination(syslog)=2', processed='destination(authlog)=4', processed='destination(errors)=10', processed='destination(kernel)=554', processed='destination(daemon)=29', processed='destination(console_all)=622', processed='source(src)=622'
Aug 13 17:48:43 workstation64 ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x2 frozen
Aug 13 17:48:43 workstation64 ata1.00: (irq_stat 0x08000000, interface fatal error)
Aug 13 17:48:43 workstation64 ata1.00: cmd ca/00:f8:98:f0:0f/00:00:00:00:00/e6 tag 0 cdb 0x0 data 126976 out
Aug 13 17:48:43 workstation64 res 50/00:00:0f:94:17/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
Aug 13 17:48:43 workstation64 ata1: soft resetting port
Aug 13 17:48:43 workstation64 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 13 17:48:43 workstation64 ata1.00: configured for UDMA/133
Aug 13 17:48:43 workstation64 ata1: EH complete
Aug 13 17:48:43 workstation64 sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
Aug 13 17:48:43 workstation64 sd 0:0:0:0: [sda] Write Protect is off
Aug 13 17:48:43 workstation64 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 13 17:48:43 workstation64 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 17:50:18 workstation64 ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x2 frozen
Aug 13 17:50:18 workstation64 ata1.00: (irq_stat 0x08000000, interface fatal error)
Aug 13 17:50:18 workstation64 ata1.00: cmd 35/00:00:f0:1e:10/00:04:06:00:00/e0 tag 0 cdb 0x0 data 524288 out
Aug 13 17:50:18 workstation64 res 50/00:00:37:c1:c3/00:00:00:00:00/e7 Emask 0x10 (ATA bus error)
Aug 13 17:50:19 workstation64 ata1: soft resetting port
Aug 13 17:50:19 workstation64 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 13 17:50:19 workstation64 ata1.00: configured for UDMA/133
Aug 13 17:50:19 workstation64 ata1: EH complete
Aug 13 17:50:19 workstation64 sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
Aug 13 17:50:19 workstation64 sd 0:0:0:0: [sda] Write Protect is off
Aug 13 17:50:19 workstation64 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 13 17:50:19 workstation64 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 17:50:24 workstation64 ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x2 frozen
Aug 13 17:50:24 workstation64 ata1.00: (irq_stat 0x08000000, interface fatal error)
Aug 13 17:50:24 workstation64 ata1.00: cmd ca/00:10:91:a6:6d/00:00:00:00:00/e1 tag 0 cdb 0x0 data 8192 out
Aug 13 17:50:24 workstation64 res 50/00:00:88:a6:6d/00:00:00:00:00/e1 Emask 0x10 (ATA bus error)
Aug 13 17:50:24 workstation64 ata1: soft resetting port
Aug 13 17:50:24 workstation64 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 13 17:50:24 workstation64 ata1.00: configured for UDMA/133
Aug 13 17:50:24 workstation64 ata1: EH complete
Aug 13 17:50:24 workstation64 sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
Aug 13 17:50:24 workstation64 sd 0:0:0:0: [sda] Write Protect is off
Aug 13 17:50:24 workstation64 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 13 17:50:24 workstation64 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 17:53:18 workstation64 syslog-ng[6162]: Log statistics; processed='center(queued)=2514', processed='center(received)=659', processed='destination(console)=0', processed='destination(mail)=11', processed='destination(user)=0', processed='destination(uucp)=0', processed='destination(messages)=544', processed='destination(news)=0', processed='destination(iptables)=0', processed='destination(everything)=655', processed='destination(lpr)=0', processed='destination(cron)=0', processed='destination(syslog)=3', processed='destination(authlog)=4', processed='destination(errors)=19', processed='destination(kernel)=590', processed='destination(daemon)=29', processed='destination(console_all)=659', processed='source(src)=659'
Aug 13 18:00:33 workstation64 ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400101 action 0x2 frozen
Aug 13 18:00:33 workstation64 ata1.00: (irq_stat 0x08000000, interface fatal error)
Aug 13 18:00:33 workstation64 ata1.00: cmd ca/00:08:a0:cb:07/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 out
Aug 13 18:00:33 workstation64 res 50/00:00:bf:32:07/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)
Aug 13 18:00:33 workstation64 ata1: soft resetting port
Aug 13 18:00:33 workstation64 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 13 18:00:33 workstation64 ata1.00: configured for UDMA/133
Aug 13 18:00:33 workstation64 ata1: EH complete
Aug 13 18:00:33 workstation64 sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
Aug 13 18:00:33 workstation64 sd 0:0:0:0: [sda] Write Protect is off
Aug 13 18:00:33 workstation64 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 13 18:00:33 workstation64 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 18:03:18 workstation64 syslog-ng[6162]: Log statistics; processed='center(queued)=2564', processed='center(received)=672', processed='destination(console)=0', processed='destination(mail)=11', processed='destination(user)=0', processed='destination(uucp)=0', processed='destination(messages)=552', processed='destination(news)=0', processed='destination(iptables)=0', processed='destination(everything)=668', processed='destination(lpr)=0', processed='destination(cron)=0', processed='destination(syslog)=4', processed='destination(authlog)=4', processed='destination(errors)=22', processed='destination(kernel)=602', processed='destination(daemon)=29', processed='destination(console_all)=672', processed='source(src)=672'
Aug 13 18:12:03 workstation64 ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x2 frozen
Aug 13 18:12:03 workstation64 ata1.00: (irq_stat 0x08000000, interface fatal error)
Aug 13 18:12:03 workstation64 ata1.00: cmd ca/00:08:d1:09:b9/00:00:00:00:00/e4 tag 0 cdb 0x0 data 4096 out
Aug 13 18:12:03 workstation64 res 50/00:00:78:8d:a5/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
Aug 13 18:12:04 workstation64 ata1: soft resetting port
Aug 13 18:12:04 workstation64 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 13 18:12:04 workstation64 ata1.00: configured for UDMA/133
Aug 13 18:12:04 workstation64 ata1: EH complete
Aug 13 18:12:04 workstation64 sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
Aug 13 18:12:04 workstation64 sd 0:0:0:0: [sda] Write Protect is off
Aug 13 18:12:04 workstation64 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 13 18:12:04 workstation64 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 18:12:09 workstation64 ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x2 frozen
Aug 13 18:12:09 workstation64 ata1.00: (irq_stat 0x08000000, interface fatal error)
Aug 13 18:12:09 workstation64 ata1.00: cmd 35/00:50:58:80:a5/00:03:07:00:00/e0 tag 0 cdb 0x0 data 434176 out
Aug 13 18:12:09 workstation64 res 50/00:00:ef:7f:a5/00:00:00:00:00/e7 Emask 0x10 (ATA bus error)
Aug 13 18:12:09 workstation64 ata1: soft resetting port
Aug 13 18:12:10 workstation64 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 13 18:12:10 workstation64 ata1.00: configured for UDMA/133
Aug 13 18:12:10 workstation64 ata1: EH complete
Aug 13 18:12:10 workstation64 sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
Aug 13 18:12:10 workstation64 sd 0:0:0:0: [sda] Write Protect is off
Aug 13 18:12:10 workstation64 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 13 18:12:10 workstation64 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 18:12:10 workstation64 ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x2 frozen
Aug 13 18:12:10 workstation64 ata1.00: (irq_stat 0x08000000, interface fatal error)
Aug 13 18:12:10 workstation64 ata1.00: cmd 35/00:00:10:50:90/00:04:08:00:00/e0 tag 0 cdb 0x0 data 524288 out
Aug 13 18:12:10 workstation64 res 50/00:00:cf:0c:5e/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)
Aug 13 18:12:10 workstation64 ata1: soft resetting port
Aug 13 18:12:11 workstation64 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 13 18:12:11 workstation64 ata1.00: configured for UDMA/133
Aug 13 18:12:11 workstation64 ata1: EH complete
Aug 13 18:12:11 workstation64 sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
Aug 13 18:12:11 workstation64 sd 0:0:0:0: [sda] Write Protect is off
Aug 13 18:12:11 workstation64 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 13 18:12:11 workstation64 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 18:13:18 workstation64 syslog-ng[6162]: Log statistics; processed='center(queued)=2708', processed='center(received)=709', processed='destination(console)=0', processed='destination(mail)=11', processed='destination(user)=0', processed='destination(uucp)=0', processed='destination(messages)=576', processed='destination(news)=0', processed='destination(iptables)=0', processed='destination(everything)=705', processed='destination(lpr)=0', processed='destination(cron)=0', processed='destination(syslog)=5', processed='destination(authlog)=4', processed='destination(errors)=31', processed='destination(kernel)=638', processed='destination(daemon)=29', processed='destination(console_all)=709', processed='source(src)=709'
Aug 13 18:14:01 workstation64 ata1.00: limiting speed to UDMA/100:PIO4
Aug 13 18:14:01 workstation64 ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x2 frozen
Aug 13 18:14:01 workstation64 ata1.00: (irq_stat 0x08000000, interface fatal error)
Aug 13 18:14:01 workstation64 ata1.00: cmd 35/00:c8:59:41:3d/00:01:00:00:00/e0 tag 0 cdb 0x0 data 233472 out
Aug 13 18:14:01 workstation64 res 50/00:00:47:47:68/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)
Aug 13 18:14:01 workstation64 ata1: soft resetting port
Aug 13 18:14:01 workstation64 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 13 18:14:01 workstation64 ata1.00: configured for UDMA/100
Aug 13 18:14:01 workstation64 ata1: EH complete
Aug 13 18:14:01 workstation64 sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
Aug 13 18:14:01 workstation64 sd 0:0:0:0: [sda] Write Protect is off
Aug 13 18:14:01 workstation64 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 13 18:14:01 workstation64 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 18:17:19 workstation64 ntpd[6205]: synchronized to 141.82.30.251, stratum 2
Aug 13 18:17:21 workstation64 ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x2 frozen
Aug 13 18:17:21 workstation64 ata1.00: (irq_stat 0x08000000, interface fatal error)
Aug 13 18:17:21 workstation64 ata1.00: cmd ca/00:10:61:3b:6d/00:00:00:00:00/e1 tag 0 cdb 0x0 data 8192 out
Aug 13 18:17:21 workstation64 res 50/00:00:48:12:6d/00:00:00:00:00/e1 Emask 0x10 (ATA bus error)
Aug 13 18:17:22 workstation64 ata1: soft resetting port
Aug 13 18:17:22 workstation64 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Aug 13 18:17:22 workstation64 ata1.00: configured for UDMA/100
Aug 13 18:17:22 workstation64 ata1: EH complete
Aug 13 18:17:22 workstation64 sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
Aug 13 18:17:22 workstation64 sd 0:0:0:0: [sda] Write Protect is off
Aug 13 18:17:22 workstation64 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 13 18:17:22 workstation64 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: ide_ck.log --]
[-- Type: text/x-log; name=ide_ck.log, Size: 50976 bytes --]
Aug 14 22:51:08 workstation64 syslog-ng[6304]: syslog-ng starting up; version='2.0.5'
Aug 14 22:51:08 workstation64 Linux version 2.6.22-ck (root@workstation64) (gcc version 4.2.1) #1 SMP PREEMPT Sat Aug 11 06:11:16 UTC 2007
Aug 14 22:51:08 workstation64 Command line: root=/dev/sda2 ro vga=794
Aug 14 22:51:08 workstation64 BIOS-provided physical RAM map:
Aug 14 22:51:08 workstation64 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
Aug 14 22:51:08 workstation64 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
Aug 14 22:51:08 workstation64 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Aug 14 22:51:08 workstation64 BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
Aug 14 22:51:08 workstation64 BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
Aug 14 22:51:08 workstation64 BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
Aug 14 22:51:08 workstation64 BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
Aug 14 22:51:08 workstation64 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Aug 14 22:51:08 workstation64 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Aug 14 22:51:08 workstation64 BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
Aug 14 22:51:08 workstation64 Entering add_active_range(0, 0, 159) 0 entries of 256 used
Aug 14 22:51:08 workstation64 Entering add_active_range(0, 256, 851680) 1 entries of 256 used
Aug 14 22:51:08 workstation64 Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
Aug 14 22:51:08 workstation64 end_pfn_map = 1245184
Aug 14 22:51:08 workstation64 DMI 2.5 present.
Aug 14 22:51:08 workstation64 ACPI: RSDP 000F7800, 0014 (r0 IntelR)
Aug 14 22:51:08 workstation64 ACPI: RSDT CFEE3000, 0034 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
Aug 14 22:51:08 workstation64 ACPI: FACP CFEE3080, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
Aug 14 22:51:08 workstation64 ACPI: DSDT CFEE3100, 4D0B (r1 INTELR AWRDACPI 1000 MSFT 3000000)
Aug 14 22:51:08 workstation64 ACPI: FACS CFEE0000, 0040
Aug 14 22:51:08 workstation64 ACPI: MCFG CFEE7F00, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
Aug 14 22:51:08 workstation64 ACPI: APIC CFEE7E40, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
Aug 14 22:51:08 workstation64 ACPI: SSDT CFEE8860, 0380 (r1 PmRef CpuPm 3000 INTL 20041203)
Aug 14 22:51:08 workstation64 Entering add_active_range(0, 0, 159) 0 entries of 256 used
Aug 14 22:51:08 workstation64 Entering add_active_range(0, 256, 851680) 1 entries of 256 used
Aug 14 22:51:08 workstation64 Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
Aug 14 22:51:08 workstation64 Zone PFN ranges:
Aug 14 22:51:08 workstation64 DMA 0 -> 4096
Aug 14 22:51:08 workstation64 DMA32 4096 -> 1048576
Aug 14 22:51:08 workstation64 Normal 1048576 -> 1245184
Aug 14 22:51:08 workstation64 early_node_map[3] active PFN ranges
Aug 14 22:51:08 workstation64 0: 0 -> 159
Aug 14 22:51:08 workstation64 0: 256 -> 851680
Aug 14 22:51:08 workstation64 0: 1048576 -> 1245184
Aug 14 22:51:08 workstation64 On node 0 totalpages: 1048191
Aug 14 22:51:08 workstation64 DMA zone: 56 pages used for memmap
Aug 14 22:51:08 workstation64 DMA zone: 1144 pages reserved
Aug 14 22:51:08 workstation64 DMA zone: 2799 pages, LIFO batch:0
Aug 14 22:51:08 workstation64 DMA32 zone: 14280 pages used for memmap
Aug 14 22:51:08 workstation64 DMA32 zone: 833304 pages, LIFO batch:31
Aug 14 22:51:08 workstation64 Normal zone: 2688 pages used for memmap
Aug 14 22:51:08 workstation64 Normal zone: 193920 pages, LIFO batch:31
Aug 14 22:51:08 workstation64 ACPI: PM-Timer IO Port: 0x408
Aug 14 22:51:08 workstation64 ACPI: Local APIC address 0xfee00000
Aug 14 22:51:08 workstation64 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Aug 14 22:51:08 workstation64 Processor #0 (Bootup-CPU)
Aug 14 22:51:08 workstation64 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Aug 14 22:51:08 workstation64 Processor #1
Aug 14 22:51:08 workstation64 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
Aug 14 22:51:08 workstation64 Processor #3
Aug 14 22:51:08 workstation64 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Aug 14 22:51:08 workstation64 Processor #2
Aug 14 22:51:08 workstation64 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Aug 14 22:51:08 workstation64 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Aug 14 22:51:08 workstation64 ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Aug 14 22:51:08 workstation64 ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Aug 14 22:51:08 workstation64 ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Aug 14 22:51:08 workstation64 IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
Aug 14 22:51:08 workstation64 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Aug 14 22:51:08 workstation64 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Aug 14 22:51:08 workstation64 ACPI: IRQ0 used by override.
Aug 14 22:51:08 workstation64 ACPI: IRQ2 used by override.
Aug 14 22:51:08 workstation64 ACPI: IRQ9 used by override.
Aug 14 22:51:08 workstation64 Setting APIC routing to flat
Aug 14 22:51:08 workstation64 Using ACPI (MADT) for SMP configuration information
Aug 14 22:51:08 workstation64 swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
Aug 14 22:51:08 workstation64 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
Aug 14 22:51:08 workstation64 swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Aug 14 22:51:08 workstation64 swsusp: Registered nosave memory region: 00000000cfee0000 - 00000000cfee3000
Aug 14 22:51:08 workstation64 swsusp: Registered nosave memory region: 00000000cfee3000 - 00000000cfef0000
Aug 14 22:51:08 workstation64 swsusp: Registered nosave memory region: 00000000cfef0000 - 00000000cff00000
Aug 14 22:51:08 workstation64 swsusp: Registered nosave memory region: 00000000cff00000 - 00000000e0000000
Aug 14 22:51:08 workstation64 swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000
Aug 14 22:51:08 workstation64 swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000
Aug 14 22:51:08 workstation64 swsusp: Registered nosave memory region: 00000000fec00000 - 0000000100000000
Aug 14 22:51:08 workstation64 Allocating PCI resources starting at d0000000 (gap: cff00000:10100000)
Aug 14 22:51:08 workstation64 SMP: Allowing 4 CPUs, 0 hotplug CPUs
Aug 14 22:51:08 workstation64 PERCPU: Allocating 34184 bytes of per cpu data
Aug 14 22:51:08 workstation64 Built 1 zonelists. Total pages: 1030023
Aug 14 22:51:08 workstation64 Kernel command line: root=/dev/sda2 ro vga=794
Aug 14 22:51:08 workstation64 Initializing CPU#0
Aug 14 22:51:08 workstation64 PID hash table entries: 4096 (order: 12, 32768 bytes)
Aug 14 22:51:08 workstation64 time.c: Detected 3375.045 MHz processor.
Aug 14 22:51:08 workstation64 Console: colour dummy device 80x25
Aug 14 22:51:08 workstation64 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Aug 14 22:51:08 workstation64 Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Aug 14 22:51:08 workstation64 Checking aperture...
Aug 14 22:51:08 workstation64 Calgary: detecting Calgary via BIOS EBDA area
Aug 14 22:51:08 workstation64 Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Aug 14 22:51:08 workstation64 PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Aug 14 22:51:08 workstation64 Placing software IO TLB between 0x58d0000 - 0x98d0000
Aug 14 22:51:08 workstation64 Memory: 4046772k/4980736k available (2728k kernel code, 145672k reserved, 1021k data, 248k init)
Aug 14 22:51:08 workstation64 SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
Aug 14 22:51:08 workstation64 Calibrating delay using timer specific routine.. 6752.45 BogoMIPS (lpj=3376229)
Aug 14 22:51:08 workstation64 Security Framework v1.0.0 initialized
Aug 14 22:51:08 workstation64 Mount-cache hash table entries: 256
Aug 14 22:51:08 workstation64 CPU: L1 I cache: 32K, L1 D cache: 32K
Aug 14 22:51:08 workstation64 CPU: L2 cache: 4096K
Aug 14 22:51:08 workstation64 using mwait in idle threads.
Aug 14 22:51:08 workstation64 CPU: Physical Processor ID: 0
Aug 14 22:51:08 workstation64 CPU: Processor Core ID: 0
Aug 14 22:51:08 workstation64 CPU0: Thermal monitoring enabled (TM1)
Aug 14 22:51:08 workstation64 SMP alternatives: switching to UP code
Aug 14 22:51:08 workstation64 Early unpacking initramfs... done
Aug 14 22:51:08 workstation64 ACPI: Core revision 20070126
Aug 14 22:51:08 workstation64 ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Aug 14 22:51:08 workstation64 Using local APIC timer interrupts.
Aug 14 22:51:08 workstation64 result 23437812
Aug 14 22:51:08 workstation64 Detected 23.437 MHz APIC timer.
Aug 14 22:51:08 workstation64 SMP alternatives: switching to SMP code
Aug 14 22:51:08 workstation64 Booting processor 1/4 APIC 0x1
Aug 14 22:51:08 workstation64 Initializing CPU#1
Aug 14 22:51:08 workstation64 Calibrating delay using timer specific routine.. 6749.05 BogoMIPS (lpj=3374527)
Aug 14 22:51:08 workstation64 CPU: L1 I cache: 32K, L1 D cache: 32K
Aug 14 22:51:08 workstation64 CPU: L2 cache: 4096K
Aug 14 22:51:08 workstation64 CPU: Physical Processor ID: 0
Aug 14 22:51:08 workstation64 CPU: Processor Core ID: 1
Aug 14 22:51:08 workstation64 CPU1: Thermal monitoring enabled (TM1)
Aug 14 22:51:08 workstation64 Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
Aug 14 22:51:08 workstation64 checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Aug 14 22:51:08 workstation64 SMP alternatives: switching to SMP code
Aug 14 22:51:08 workstation64 Booting processor 2/4 APIC 0x3
Aug 14 22:51:08 workstation64 Initializing CPU#2
Aug 14 22:51:08 workstation64 Calibrating delay using timer specific routine.. 6749.14 BogoMIPS (lpj=3374574)
Aug 14 22:51:08 workstation64 CPU: L1 I cache: 32K, L1 D cache: 32K
Aug 14 22:51:08 workstation64 CPU: L2 cache: 4096K
Aug 14 22:51:08 workstation64 CPU: Physical Processor ID: 0
Aug 14 22:51:08 workstation64 CPU: Processor Core ID: 3
Aug 14 22:51:08 workstation64 CPU2: Thermal monitoring enabled (TM1)
Aug 14 22:51:08 workstation64 Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
Aug 14 22:51:08 workstation64 checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Aug 14 22:51:08 workstation64 SMP alternatives: switching to SMP code
Aug 14 22:51:08 workstation64 Booting processor 3/4 APIC 0x2
Aug 14 22:51:08 workstation64 Initializing CPU#3
Aug 14 22:51:08 workstation64 Calibrating delay using timer specific routine.. 6749.04 BogoMIPS (lpj=3374523)
Aug 14 22:51:08 workstation64 CPU: L1 I cache: 32K, L1 D cache: 32K
Aug 14 22:51:08 workstation64 CPU: L2 cache: 4096K
Aug 14 22:51:08 workstation64 CPU: Physical Processor ID: 0
Aug 14 22:51:08 workstation64 CPU: Processor Core ID: 2
Aug 14 22:51:08 workstation64 CPU3: Thermal monitoring enabled (TM1)
Aug 14 22:51:08 workstation64 Intel(R) Core(TM)2 Quad CPU @ 2.40GHz stepping 07
Aug 14 22:51:08 workstation64 checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Aug 14 22:51:08 workstation64 Brought up 4 CPUs
Aug 14 22:51:08 workstation64 migration_cost=12,2217
Aug 14 22:51:08 workstation64 NET: Registered protocol family 16
Aug 14 22:51:08 workstation64 ACPI: bus type pci registered
Aug 14 22:51:08 workstation64 PCI: Using MMCONFIG at e0000000 - efffffff
Aug 14 22:51:08 workstation64 ACPI: Interpreter enabled
Aug 14 22:51:08 workstation64 ACPI: (supports S0 S3 S4 S5)
Aug 14 22:51:08 workstation64 ACPI: Using IOAPIC for interrupt routing
Aug 14 22:51:08 workstation64 ACPI: PCI Root Bridge [PCI0] (0000:00)
Aug 14 22:51:08 workstation64 PCI: Probing PCI hardware (bus 00)
Aug 14 22:51:08 workstation64 PCI: Transparent bridge - 0000:00:1e.0
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 9 *10 11 12)
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 9 10 11 12) *0, disabled.
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 9 *10 11 12)
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 9 10 *11 12)
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 *7 9 10 11 12)
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt Link [LNKF] (IRQs *4 5 7 9 10 11 12)
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt Link [LNK0] (IRQs 4 *5 7 9 10 11 12)
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt Link [LNK1] (IRQs 4 5 7 9 10 *11 12)
Aug 14 22:51:08 workstation64 Linux Plug and Play Support v0.97 (c) Adam Belay
Aug 14 22:51:08 workstation64 pnp: PnP ACPI init
Aug 14 22:51:08 workstation64 ACPI: bus type pnp registered
Aug 14 22:51:08 workstation64 pnp: PnP ACPI: found 11 devices
Aug 14 22:51:08 workstation64 ACPI: ACPI bus type pnp unregistered
Aug 14 22:51:08 workstation64 SCSI subsystem initialized
Aug 14 22:51:08 workstation64 PCI: Using ACPI for IRQ routing
Aug 14 22:51:08 workstation64 PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Aug 14 22:51:08 workstation64 NetLabel: Initializing
Aug 14 22:51:08 workstation64 NetLabel: domain hash size = 128
Aug 14 22:51:08 workstation64 NetLabel: protocols = UNLABELED CIPSOv4
Aug 14 22:51:08 workstation64 NetLabel: unlabeled traffic allowed by default
Aug 14 22:51:08 workstation64 PCI-GART: No AMD northbridge found.
Aug 14 22:51:08 workstation64 ACPI: RTC can wake from S4
Aug 14 22:51:08 workstation64 pnp: 00:06: ioport range 0x400-0x4bf has been reserved
Aug 14 22:51:08 workstation64 pnp: 00:09: iomem range 0xe0000000-0xefffffff could not be reserved
Aug 14 22:51:08 workstation64 pnp: 00:0a: iomem range 0xf0000-0xfffff could not be reserved
Aug 14 22:51:08 workstation64 pnp: 00:0a: iomem range 0xcff00000-0xcfffffff has been reserved
Aug 14 22:51:08 workstation64 pnp: 00:0a: iomem range 0xcfee0000-0xcfefffff could not be reserved
Aug 14 22:51:08 workstation64 pnp: 00:0a: iomem range 0x0-0x9ffff could not be reserved
Aug 14 22:51:08 workstation64 PCI: Bridge: 0000:00:01.0
Aug 14 22:51:08 workstation64 IO window: a000-afff
Aug 14 22:51:08 workstation64 MEM window: fa000000-fcffffff
Aug 14 22:51:08 workstation64 PREFETCH window: d0000000-dfffffff
Aug 14 22:51:08 workstation64 PCI: Bridge: 0000:00:1c.0
Aug 14 22:51:08 workstation64 IO window: d000-dfff
Aug 14 22:51:08 workstation64 MEM window: fdd00000-fddfffff
Aug 14 22:51:08 workstation64 PREFETCH window: fda00000-fdafffff
Aug 14 22:51:08 workstation64 PCI: Bridge: 0000:00:1c.4
Aug 14 22:51:08 workstation64 IO window: c000-cfff
Aug 14 22:51:08 workstation64 MEM window: fd900000-fd9fffff
Aug 14 22:51:08 workstation64 PREFETCH window: fde00000-fdefffff
Aug 14 22:51:08 workstation64 PCI: Bridge: 0000:00:1e.0
Aug 14 22:51:08 workstation64 IO window: b000-bfff
Aug 14 22:51:08 workstation64 MEM window: fdc00000-fdcfffff
Aug 14 22:51:08 workstation64 PREFETCH window: fdb00000-fdbfffff
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:00:01.0 to 64
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:00:1c.0 to 64
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:00:1c.4 to 64
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:00:1e.0 to 64
Aug 14 22:51:08 workstation64 NET: Registered protocol family 2
Aug 14 22:51:08 workstation64 Time: tsc clocksource has been installed.
Aug 14 22:51:08 workstation64 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Aug 14 22:51:08 workstation64 TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
Aug 14 22:51:08 workstation64 TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Aug 14 22:51:08 workstation64 TCP: Hash tables configured (established 131072 bind 65536)
Aug 14 22:51:08 workstation64 TCP reno registered
Aug 14 22:51:08 workstation64 checking if image is initramfs... it is
Aug 14 22:51:08 workstation64 Freeing initrd memory: 637k freed
Aug 14 22:51:08 workstation64 VFS: Disk quotas dquot_6.5.1
Aug 14 22:51:08 workstation64 Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Aug 14 22:51:08 workstation64 Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Aug 14 22:51:08 workstation64 io scheduler noop registered
Aug 14 22:51:08 workstation64 io scheduler anticipatory registered
Aug 14 22:51:08 workstation64 io scheduler deadline registered
Aug 14 22:51:08 workstation64 io scheduler cfq registered (default)
Aug 14 22:51:08 workstation64 Boot video device is 0000:01:00.0
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:00:01.0 to 64
Aug 14 22:51:08 workstation64 assign_interrupt_mode Found MSI capability
Aug 14 22:51:08 workstation64 Allocate Port Service[0000:00:01.0:pcie00]
Aug 14 22:51:08 workstation64 Allocate Port Service[0000:00:01.0:pcie03]
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:00:1c.0 to 64
Aug 14 22:51:08 workstation64 assign_interrupt_mode Found MSI capability
Aug 14 22:51:08 workstation64 Allocate Port Service[0000:00:1c.0:pcie00]
Aug 14 22:51:08 workstation64 Allocate Port Service[0000:00:1c.0:pcie02]
Aug 14 22:51:08 workstation64 Allocate Port Service[0000:00:1c.0:pcie03]
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:00:1c.4 to 64
Aug 14 22:51:08 workstation64 assign_interrupt_mode Found MSI capability
Aug 14 22:51:08 workstation64 Allocate Port Service[0000:00:1c.4:pcie00]
Aug 14 22:51:08 workstation64 Allocate Port Service[0000:00:1c.4:pcie02]
Aug 14 22:51:08 workstation64 Allocate Port Service[0000:00:1c.4:pcie03]
Aug 14 22:51:08 workstation64 vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010100000, using 5120k, total 131072k
Aug 14 22:51:08 workstation64 vesafb: mode is 1280x1024x16, linelength=2560, pages=1
Aug 14 22:51:08 workstation64 vesafb: scrolling: redraw
Aug 14 22:51:08 workstation64 vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Aug 14 22:51:08 workstation64 Console: switching to colour frame buffer device 160x64
Aug 14 22:51:08 workstation64 fb0: VESA VGA frame buffer device
Aug 14 22:51:08 workstation64 ACPI: SSDT CFEE7F80, 022A (r1 PmRef Cpu0Ist 3000 INTL 20041203)
Aug 14 22:51:08 workstation64 ACPI: SSDT CFEE8440, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20041203)
Aug 14 22:51:08 workstation64 ACPI: SSDT CFEE85A0, 0152 (r1 PmRef Cpu2Ist 3000 INTL 20041203)
Aug 14 22:51:08 workstation64 ACPI: SSDT CFEE8700, 0152 (r1 PmRef Cpu3Ist 3000 INTL 20041203)
Aug 14 22:51:08 workstation64 ACPI Error (dswstate-0226): No result objects! State=ffff81012f8df400 [20070126]
Aug 14 22:51:08 workstation64 ACPI Exception (dsutils-0642): AE_AML_NO_RETURN_VALUE, Missing or null operand [20070126]
Aug 14 22:51:08 workstation64 ACPI Exception (dsutils-0735): AE_AML_NO_RETURN_VALUE, While creating Arg 1 [20070126]
Aug 14 22:51:08 workstation64 ACPI Error (psparse-0537): Method parse/execution failed [\_TZ_.THRM._TMP] (Node ffff81012fe3c8a0), AE_AML_NO_RETURN_VALUE
Aug 14 22:51:08 workstation64 Real Time Clock Driver v1.12ac
Aug 14 22:51:08 workstation64 Linux agpgart interface v0.102 (c) Dave Jones
Aug 14 22:51:08 workstation64 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Aug 14 22:51:08 workstation64 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Aug 14 22:51:08 workstation64 loop: module loaded
Aug 14 22:51:08 workstation64 input: Macintosh mouse button emulation as /class/input/input0
Aug 14 22:51:08 workstation64 PNP: No PS/2 controller found. Probing ports directly.
Aug 14 22:51:08 workstation64 serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 14 22:51:08 workstation64 serio: i8042 AUX port at 0x60,0x64 irq 12
Aug 14 22:51:08 workstation64 mice: PS/2 mouse device common for all mice
Aug 14 22:51:08 workstation64 TCP cubic registered
Aug 14 22:51:08 workstation64 NET: Registered protocol family 1
Aug 14 22:51:08 workstation64 NET: Registered protocol family 17
Aug 14 22:51:08 workstation64 Freeing unused kernel memory: 248k freed
Aug 14 22:51:08 workstation64 libata version 2.21 loaded.
Aug 14 22:51:08 workstation64 ata_piix 0000:00:1f.2: version 2.11
Aug 14 22:51:08 workstation64 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:00:1f.2 to 64
Aug 14 22:51:08 workstation64 scsi0 : ata_piix
Aug 14 22:51:08 workstation64 scsi1 : ata_piix
Aug 14 22:51:08 workstation64 ata1: SATA max UDMA/133 cmd 0x000000000001f900 ctl 0x000000000001f802 bmdma 0x000000000001f500 irq 19
Aug 14 22:51:08 workstation64 ata2: SATA max UDMA/133 cmd 0x000000000001f700 ctl 0x000000000001f602 bmdma 0x000000000001f508 irq 19
Aug 14 22:51:08 workstation64 ata1.00: ATA-7: WDC WD740ADFD-00NLR1, 20.07P20, max UDMA/133
Aug 14 22:51:08 workstation64 ata1.00: 145226112 sectors, multi 16: LBA48 NCQ (not used)
Aug 14 22:51:08 workstation64 ata1.00: configured for UDMA/133
Aug 14 22:51:08 workstation64 ata2.00: ATA-7: SAMSUNG HD401LJ, ZZ100-15, max UDMA7
Aug 14 22:51:08 workstation64 ata2.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
Aug 14 22:51:08 workstation64 ata2.00: configured for UDMA/133
Aug 14 22:51:08 workstation64 scsi 0:0:0:0: Direct-Access ATA WDC WD740ADFD-00 20.0 PQ: 0 ANSI: 5
Aug 14 22:51:08 workstation64 scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD401LJ ZZ10 PQ: 0 ANSI: 5
Aug 14 22:51:08 workstation64 ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 19
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:00:1f.5 to 64
Aug 14 22:51:08 workstation64 scsi2 : ata_piix
Aug 14 22:51:08 workstation64 scsi3 : ata_piix
Aug 14 22:51:08 workstation64 ata3: SATA max UDMA/133 cmd 0x000000000001f200 ctl 0x000000000001f102 bmdma 0x000000000001ee00 irq 19
Aug 14 22:51:08 workstation64 ata4: SATA max UDMA/133 cmd 0x000000000001f000 ctl 0x000000000001ef02 bmdma 0x000000000001ee08 irq 19
Aug 14 22:51:08 workstation64 PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:03:00.1 to 64
Aug 14 22:51:08 workstation64 scsi4 : pata_jmicron
Aug 14 22:51:08 workstation64 scsi5 : pata_jmicron
Aug 14 22:51:08 workstation64 ata5: PATA max UDMA/100 cmd 0x000000000001cf00 ctl 0x000000000001ce02 bmdma 0x000000000001cb00 irq 17
Aug 14 22:51:08 workstation64 ata6: PATA max UDMA/100 cmd 0x000000000001cd00 ctl 0x000000000001cc02 bmdma 0x000000000001cb08 irq 17
Aug 14 22:51:08 workstation64 ata5.00: Host Protected Area detected:
Aug 14 22:51:08 workstation64 current size: 488395055 sectors
Aug 14 22:51:08 workstation64 native size: 488397168 sectors
Aug 14 22:51:08 workstation64 ata5.00: ATA-6: HDS722525VLAT80, V36OA6EA, max UDMA/100
Aug 14 22:51:08 workstation64 ata5.00: 488395055 sectors, multi 0: LBA48
Aug 14 22:51:08 workstation64 ata5.01: ATAPI: HL-DT-ST DVDRAM GSA-4160B, A306, max UDMA/66
Aug 14 22:51:08 workstation64 ata5.00: Host Protected Area detected:
Aug 14 22:51:08 workstation64 current size: 488395055 sectors
Aug 14 22:51:08 workstation64 native size: 488397168 sectors
Aug 14 22:51:08 workstation64 ata5.00: configured for UDMA/100
Aug 14 22:51:08 workstation64 ata5.01: configured for UDMA/66
Aug 14 22:51:08 workstation64 scsi 4:0:0:0: Direct-Access ATA HDS722525VLAT80 V36O PQ: 0 ANSI: 5
Aug 14 22:51:08 workstation64 scsi 4:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4160B A306 PQ: 0 ANSI: 5
Aug 14 22:51:08 workstation64 ahci 0000:03:00.0: version 2.2
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Aug 14 22:51:08 workstation64 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Aug 14 22:51:08 workstation64 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Aug 14 22:51:08 workstation64 sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
Aug 14 22:51:08 workstation64 sd 0:0:0:0: [sda] Write Protect is off
Aug 14 22:51:08 workstation64 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 14 22:51:08 workstation64 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 14 22:51:08 workstation64 sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
Aug 14 22:51:08 workstation64 sd 0:0:0:0: [sda] Write Protect is off
Aug 14 22:51:08 workstation64 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 14 22:51:08 workstation64 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 14 22:51:08 workstation64 sda: sda1 sda2 sda3
Aug 14 22:51:08 workstation64 sd 0:0:0:0: [sda] Attached SCSI disk
Aug 14 22:51:08 workstation64 sd 1:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
Aug 14 22:51:08 workstation64 sd 1:0:0:0: [sdb] Write Protect is off
Aug 14 22:51:08 workstation64 sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Aug 14 22:51:08 workstation64 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 14 22:51:08 workstation64 sd 1:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
Aug 14 22:51:08 workstation64 sd 1:0:0:0: [sdb] Write Protect is off
Aug 14 22:51:08 workstation64 sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Aug 14 22:51:08 workstation64 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 14 22:51:08 workstation64 sdb: sdb1
Aug 14 22:51:08 workstation64 sd 1:0:0:0: [sdb] Attached SCSI disk
Aug 14 22:51:08 workstation64 sd 4:0:0:0: [sdc] 488395055 512-byte hardware sectors (250058 MB)
Aug 14 22:51:08 workstation64 sd 4:0:0:0: [sdc] Write Protect is off
Aug 14 22:51:08 workstation64 sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Aug 14 22:51:08 workstation64 sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 14 22:51:08 workstation64 sd 4:0:0:0: [sdc] 488395055 512-byte hardware sectors (250058 MB)
Aug 14 22:51:08 workstation64 sd 4:0:0:0: [sdc] Write Protect is off
Aug 14 22:51:08 workstation64 sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Aug 14 22:51:08 workstation64 sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 14 22:51:08 workstation64 sdc: sdc1
Aug 14 22:51:08 workstation64 sd 4:0:0:0: [sdc] Attached SCSI disk
Aug 14 22:51:08 workstation64 ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
Aug 14 22:51:08 workstation64 ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:03:00.0 to 64
Aug 14 22:51:08 workstation64 scsi6 : ahci
Aug 14 22:51:08 workstation64 scsi7 : ahci
Aug 14 22:51:08 workstation64 ata7: SATA max UDMA/133 cmd 0xffffc20000048100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
Aug 14 22:51:08 workstation64 ata8: SATA max UDMA/133 cmd 0xffffc20000048180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
Aug 14 22:51:08 workstation64 ata7: SATA link down (SStatus 0 SControl 300)
Aug 14 22:51:08 workstation64 ata8: SATA link down (SStatus 0 SControl 300)
Aug 14 22:51:08 workstation64 sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Aug 14 22:51:08 workstation64 Uniform CD-ROM driver Revision: 3.20
Aug 14 22:51:08 workstation64 sr 4:0:1:0: Attached scsi CD-ROM sr0
Aug 14 22:51:08 workstation64 ReiserFS: sda2: found reiserfs format "3.6" with standard journal
Aug 14 22:51:08 workstation64 ReiserFS: sda2: using ordered data mode
Aug 14 22:51:08 workstation64 ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Aug 14 22:51:08 workstation64 ReiserFS: sda2: checking transaction log (sda2)
Aug 14 22:51:08 workstation64 ReiserFS: sda2: Using r5 hash to sort names
Aug 14 22:51:08 workstation64 usbcore: registered new interface driver usbfs
Aug 14 22:51:08 workstation64 usbcore: registered new interface driver hub
Aug 14 22:51:08 workstation64 usbcore: registered new device driver usb
Aug 14 22:51:08 workstation64 coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong!
Aug 14 22:51:08 workstation64 coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong!
Aug 14 22:51:08 workstation64 coretemp coretemp.2: Using undocumented features, absolute temperature might be wrong!
Aug 14 22:51:08 workstation64 coretemp coretemp.3: Using undocumented features, absolute temperature might be wrong!
Aug 14 22:51:08 workstation64 input: Power Button (FF) as /class/input/input1
Aug 14 22:51:08 workstation64 ACPI: Power Button (FF) [PWRF]
Aug 14 22:51:08 workstation64 input: Power Button (CM) as /class/input/input2
Aug 14 22:51:08 workstation64 ACPI: Power Button (CM) [PWRB]
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:00:1a.7 to 64
Aug 14 22:51:08 workstation64 ehci_hcd 0000:00:1a.7: EHCI Host Controller
Aug 14 22:51:08 workstation64 ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Aug 14 22:51:08 workstation64 PCI: cache line size of 32 is not supported by device 0000:00:1a.7
Aug 14 22:51:08 workstation64 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
Aug 14 22:51:08 workstation64 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Aug 14 22:51:08 workstation64 usb usb1: configuration #1 chosen from 1 choice
Aug 14 22:51:08 workstation64 hub 1-0:1.0: USB hub found
Aug 14 22:51:08 workstation64 hub 1-0:1.0: 6 ports detected
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:00:1d.7 to 64
Aug 14 22:51:08 workstation64 ehci_hcd 0000:00:1d.7: EHCI Host Controller
Aug 14 22:51:08 workstation64 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Aug 14 22:51:08 workstation64 PCI: cache line size of 32 is not supported by device 0000:00:1d.7
Aug 14 22:51:08 workstation64 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
Aug 14 22:51:08 workstation64 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Aug 14 22:51:08 workstation64 usb usb2: configuration #1 chosen from 1 choice
Aug 14 22:51:08 workstation64 hub 2-0:1.0: USB hub found
Aug 14 22:51:08 workstation64 hub 2-0:1.0: 6 ports detected
Aug 14 22:51:08 workstation64 USB Universal Host Controller Interface driver v3.0
Aug 14 22:51:08 workstation64 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Aug 14 22:51:08 workstation64 rtc_cmos: probe of 00:03 failed with error -16
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:00:1a.0 to 64
Aug 14 22:51:08 workstation64 uhci_hcd 0000:00:1a.0: UHCI Host Controller
Aug 14 22:51:08 workstation64 uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Aug 14 22:51:08 workstation64 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
Aug 14 22:51:08 workstation64 usb usb3: configuration #1 chosen from 1 choice
Aug 14 22:51:08 workstation64 hub 3-0:1.0: USB hub found
Aug 14 22:51:08 workstation64 hub 3-0:1.0: 2 ports detected
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:00:1a.1 to 64
Aug 14 22:51:08 workstation64 uhci_hcd 0000:00:1a.1: UHCI Host Controller
Aug 14 22:51:08 workstation64 uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Aug 14 22:51:08 workstation64 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
Aug 14 22:51:08 workstation64 usb usb4: configuration #1 chosen from 1 choice
Aug 14 22:51:08 workstation64 hub 4-0:1.0: USB hub found
Aug 14 22:51:08 workstation64 hub 4-0:1.0: 2 ports detected
Aug 14 22:51:08 workstation64 sd 0:0:0:0: Attached scsi generic sg0 type 0
Aug 14 22:51:08 workstation64 sd 1:0:0:0: Attached scsi generic sg1 type 0
Aug 14 22:51:08 workstation64 sd 4:0:0:0: Attached scsi generic sg2 type 0
Aug 14 22:51:08 workstation64 sr 4:0:1:0: Attached scsi generic sg3 type 5
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:00:1a.2[D] -> GSI 19 (level, low) -> IRQ 19
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:00:1a.2 to 64
Aug 14 22:51:08 workstation64 uhci_hcd 0000:00:1a.2: UHCI Host Controller
Aug 14 22:51:08 workstation64 uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
Aug 14 22:51:08 workstation64 uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fd00
Aug 14 22:51:08 workstation64 usb usb5: configuration #1 chosen from 1 choice
Aug 14 22:51:08 workstation64 hub 5-0:1.0: USB hub found
Aug 14 22:51:08 workstation64 hub 5-0:1.0: 2 ports detected
Aug 14 22:51:08 workstation64 input: PC Speaker as /class/input/input3
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:00:1d.0 to 64
Aug 14 22:51:08 workstation64 uhci_hcd 0000:00:1d.0: UHCI Host Controller
Aug 14 22:51:08 workstation64 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
Aug 14 22:51:08 workstation64 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
Aug 14 22:51:08 workstation64 usb usb6: configuration #1 chosen from 1 choice
Aug 14 22:51:08 workstation64 hub 6-0:1.0: USB hub found
Aug 14 22:51:08 workstation64 hub 6-0:1.0: 2 ports detected
Aug 14 22:51:08 workstation64 b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:00:1d.1 to 64
Aug 14 22:51:08 workstation64 uhci_hcd 0000:00:1d.1: UHCI Host Controller
Aug 14 22:51:08 workstation64 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
Aug 14 22:51:08 workstation64 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
Aug 14 22:51:08 workstation64 usb usb7: configuration #1 chosen from 1 choice
Aug 14 22:51:08 workstation64 hub 7-0:1.0: USB hub found
Aug 14 22:51:08 workstation64 hub 7-0:1.0: 2 ports detected
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:00:1d.2 to 64
Aug 14 22:51:08 workstation64 uhci_hcd 0000:00:1d.2: UHCI Host Controller
Aug 14 22:51:08 workstation64 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
Aug 14 22:51:08 workstation64 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
Aug 14 22:51:08 workstation64 usb usb8: configuration #1 chosen from 1 choice
Aug 14 22:51:08 workstation64 hub 8-0:1.0: USB hub found
Aug 14 22:51:08 workstation64 hub 8-0:1.0: 2 ports detected
Aug 14 22:51:08 workstation64 flexcop-pci: will use the HW PID filter.
Aug 14 22:51:08 workstation64 flexcop-pci: card revision 2
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 22 (level, low) -> IRQ 22
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:04:03.0 to 64
Aug 14 22:51:08 workstation64 DVB: registering new adapter (FlexCop Digital TV device).
Aug 14 22:51:08 workstation64 b2c2-flexcop: MAC address = 00:d0:d7:0d:0d:9e
Aug 14 22:51:08 workstation64 usb 3-1: new full speed USB device using uhci_hcd and address 2
Aug 14 22:51:08 workstation64 b2c2-flexcop: found the stv0299 at i2c address: 0x68
Aug 14 22:51:08 workstation64 DVB: registering frontend 0 (ST STV0299 DVB-S)...
Aug 14 22:51:08 workstation64 b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 18 (level, low) -> IRQ 18
Aug 14 22:51:08 workstation64 r8169 Gigabit Ethernet driver 2.2LK loaded
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 22 (level, low) -> IRQ 22
Aug 14 22:51:08 workstation64 eth0: RTL8169sc/8110sc at 0xffffc20000050000, 00:50:8d:9f:9a:05, IRQ 22
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 21 (level, low) -> IRQ 21
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:04:02.0 to 64
Aug 14 22:51:08 workstation64 gameport: EMU10K1 is pci0000:04:05.1/gameport0, io 0xbd00, speed 1041kHz
Aug 14 22:51:08 workstation64 usb 3-1: configuration #1 chosen from 1 choice
Aug 14 22:51:08 workstation64 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fdcfe000-fdcfe7ff] Max Packet=[2048] IR/IT contexts=[4/8]
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:04:05.2[B] -> GSI 21 (level, low) -> IRQ 21
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:04:05.2 to 64
Aug 14 22:51:08 workstation64 ohci1394: fw-host1: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[fdcfd000-fdcfd7ff] Max Packet=[2048] IR/IT contexts=[4/8]
Aug 14 22:51:08 workstation64 ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 20 (level, low) -> IRQ 20
Aug 14 22:51:08 workstation64 PCI: Setting latency timer of device 0000:04:05.0 to 64
Aug 14 22:51:08 workstation64 Linux video capture interface: v2.00
Aug 14 22:51:08 workstation64 usb 4-1: new low speed USB device using uhci_hcd and address 2
Aug 14 22:51:08 workstation64 usb 4-1: configuration #1 chosen from 1 choice
Aug 14 22:51:08 workstation64 usb 4-2: new low speed USB device using uhci_hcd and address 3
Aug 14 22:51:08 workstation64 usb 4-2: configuration #1 chosen from 1 choice
Aug 14 22:51:08 workstation64 drivers/media/video/stv680.c: [stv680_probe:1422] STV(i): STV0680 camera found.
Aug 14 22:51:08 workstation64 drivers/media/video/stv680.c: [stv680_probe:1462] STV(i): registered new video device: video0
Aug 14 22:51:08 workstation64 usbcore: registered new interface driver stv680
Aug 14 22:51:08 workstation64 drivers/media/video/stv680.c: [usb_stv680_init:1543] STV(i): usb camera driver version v0.25 registering
Aug 14 22:51:08 workstation64 drivers/media/video/stv680.c: STV0680 USB Camera Driver v0.25
Aug 14 22:51:08 workstation64 usbcore: registered new interface driver hiddev
Aug 14 22:51:08 workstation64 input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input4
Aug 14 22:51:08 workstation64 input: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1a.1-1
Aug 14 22:51:08 workstation64 input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input5
Aug 14 22:51:08 workstation64 input: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1a.1-1
Aug 14 22:51:08 workstation64 input: Logitech USB RECEIVER as /class/input/input6
Aug 14 22:51:08 workstation64 input: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1a.1-2
Aug 14 22:51:08 workstation64 usbcore: registered new interface driver usbhid
Aug 14 22:51:08 workstation64 drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Aug 14 22:51:08 workstation64 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00508d000099f7ea]
Aug 14 22:51:08 workstation64 ieee1394: Host added: ID:BUS[1-01:1023] GUID[00023c0021039053]
Aug 14 22:51:08 workstation64 ReiserFS: sda3: found reiserfs format "3.6" with standard journal
Aug 14 22:51:08 workstation64 ReiserFS: sda3: using ordered data mode
Aug 14 22:51:08 workstation64 ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Aug 14 22:51:08 workstation64 ReiserFS: sda3: checking transaction log (sda3)
Aug 14 22:51:08 workstation64 ReiserFS: sda3: Using r5 hash to sort names
Aug 14 22:51:08 workstation64 ReiserFS: sdb1: found reiserfs format "3.6" with standard journal
Aug 14 22:51:08 workstation64 ReiserFS: sdb1: using ordered data mode
Aug 14 22:51:08 workstation64 ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
Aug 14 22:51:08 workstation64 ReiserFS: sdb1: checking transaction log (sdb1)
Aug 14 22:51:08 workstation64 ReiserFS: sdb1: Using r5 hash to sort names
Aug 14 22:51:08 workstation64 Adding 2000052k swap on /dev/sda1. Priority:-1 extents:1 across:2000052k
Aug 14 22:51:08 workstation64 r8169: eth0: link up
Aug 14 22:51:09 workstation64 ntpd[6342]: ntpd 4.2.4p3@1.1502-o Tue Jul 3 17:33:51 UTC 2007 (1)
Aug 14 22:51:09 workstation64 ntpd[6355]: precision = 1.000 usec
Aug 14 22:51:09 workstation64 NET: Registered protocol family 10
Aug 14 22:51:09 workstation64 lo: Disabled Privacy Extensions
Aug 14 22:51:09 workstation64 Mobile IPv6
Aug 14 22:51:09 workstation64 ntpd[6355]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
Aug 14 22:51:09 workstation64 ntpd[6355]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Aug 14 22:51:09 workstation64 ntpd[6355]: Listening on interface #1 wildcard, ::#123 Disabled
Aug 14 22:51:09 workstation64 ntpd[6355]: Listening on interface #2 lo, ::1#123 Enabled
Aug 14 22:51:09 workstation64 ntpd[6355]: bind() fd 19, family 10, port 123, scope 2, addr fe80::250:8dff:fe9f:9a05, in6_is_addr_multicast=0 flags=0x11 fails: Cannot assign requested address
Aug 14 22:51:09 workstation64 ntpd[6355]: unable to create socket on eth0 (3) for fe80::250:8dff:fe9f:9a05#123
Aug 14 22:51:09 workstation64 ntpd[6355]: failed to initialize interface for address fe80::250:8dff:fe9f:9a05
Aug 14 22:51:09 workstation64 ntpd[6355]: Listening on interface #4 lo, 127.0.0.1#123 Enabled
Aug 14 22:51:09 workstation64 ntpd[6355]: Listening on interface #5 eth0, 192.168.0.2#123 Enabled
Aug 14 22:51:09 workstation64 ntpd[6355]: kernel time sync status 0040
Aug 14 22:51:09 workstation64 ntpd[6355]: frequency initialized 4.712 PPM from /var/lib/ntp/ntp.drift
Aug 14 22:51:10 workstation64 ntpd[6355]: bind() fd 21, family 10, port 123, scope 2, addr fe80::250:8dff:fe9f:9a05, in6_is_addr_multicast=0 flags=0x11 fails: Cannot assign requested address
Aug 14 22:51:10 workstation64 ntpd[6355]: unable to create socket on eth0 (6) for fe80::250:8dff:fe9f:9a05#123
Aug 14 22:51:10 workstation64 ntpd[6355]: failed to initialize interface for address fe80::250:8dff:fe9f:9a05
Aug 14 22:51:12 workstation64 acpid: starting up
Aug 14 22:51:12 workstation64 acpid: 1 rule loaded
Aug 14 22:51:13 workstation64 acpid: client connected from 6452[82:82]
Aug 14 22:51:13 workstation64 acpid: 1 client rule loaded
Aug 14 22:51:13 workstation64 clamd[6480]: clamd daemon 0.91.1 (OS: linux-gnu, ARCH: x86_64, CPU: x86_64)
Aug 14 22:51:13 workstation64 clamd[6480]: Running as user clamav (UID 64, GID 64)
Aug 14 22:51:13 workstation64 clamd[6480]: Log file size limited to 2097152 bytes.
Aug 14 22:51:13 workstation64 clamd[6480]: Reading databases from /var/lib/clamav
Aug 14 22:51:14 workstation64 postfix/postfix-script[6521]: starting the Postfix mail system
Aug 14 22:51:15 workstation64 postfix/master[6522]: daemon started -- version 2.4.3, configuration /etc/postfix
Aug 14 22:51:15 workstation64 clamd[6480]: Loaded 147069 signatures.
Aug 14 22:51:15 workstation64 clamd[6480]: Unix socket file /var/lib/clamav/clamd.sock
Aug 14 22:51:15 workstation64 clamd[6480]: Setting connection queue length to 15
Aug 14 22:51:15 workstation64 clamd[6480]: Archive: Archived file size limit set to 524288000 bytes.
Aug 14 22:51:15 workstation64 clamd[6480]: Archive: Recursion level limit set to 8.
Aug 14 22:51:15 workstation64 clamd[6480]: Archive: Files limit set to 1000.
Aug 14 22:51:15 workstation64 clamd[6480]: Archive: Compression ratio limit set to 250.
Aug 14 22:51:15 workstation64 clamd[6480]: Archive support enabled.
Aug 14 22:51:15 workstation64 clamd[6480]: Algorithmic detection enabled.
Aug 14 22:51:15 workstation64 clamd[6480]: Portable Executable support enabled.
Aug 14 22:51:15 workstation64 clamd[6480]: ELF support enabled.
Aug 14 22:51:15 workstation64 clamd[6480]: Mail files support enabled.
Aug 14 22:51:15 workstation64 clamd[6480]: Mail: Recursion level limit set to 64.
Aug 14 22:51:15 workstation64 clamd[6480]: OLE2 support enabled.
Aug 14 22:51:15 workstation64 clamd[6480]: PDF support enabled.
Aug 14 22:51:15 workstation64 clamd[6480]: HTML support enabled.
Aug 14 22:51:15 workstation64 clamd[6480]: Self checking every 1800 seconds.
Aug 14 22:51:15 workstation64 freshclam[6527]: freshclam daemon 0.91.1 (OS: linux-gnu, ARCH: x86_64, CPU: x86_64)
Aug 14 22:51:15 workstation64 freshclam[6527]: ClamAV update process started at Tue Aug 14 22:51:15 2007
Aug 14 22:51:15 workstation64 freshclam[6527]: main.inc is up to date (version: 44, sigs: 133163, f-level: 20, builder: sven)
Aug 14 22:51:15 workstation64 freshclam[6527]: daily.inc is up to date (version: 3957, sigs: 13906, f-level: 20, builder: ccordes)
Aug 14 22:51:15 workstation64 freshclam[6527]: --------------------------------------
Aug 14 22:51:15 workstation64 acpid: client connected from 6550[0:0]
Aug 14 22:51:15 workstation64 acpid: 1 client rule loaded
Aug 14 22:51:16 workstation64 nvidia: module license 'NVIDIA' taints kernel.
Aug 14 22:51:16 workstation64 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Aug 14 22:51:16 workstation64 PCI: Setting latency timer of device 0000:01:00.0 to 64
Aug 14 22:51:16 workstation64 NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.11 Wed Jun 13 16:33:22 PDT 2007
Aug 14 22:51:17 workstation64 acpid: client connected from 6550[0:0]
Aug 14 22:51:17 workstation64 acpid: 1 client rule loaded
Aug 14 22:51:18 workstation64 drivers/media/video/stv680.c: [stv_init:374] STV(i): CIF is supported
Aug 14 22:51:18 workstation64 drivers/media/video/stv680.c: [stv_init:392] STV(i): Camera has 0 pictures.
Aug 14 22:51:18 workstation64 drivers/media/video/stv680.c: [stv_init:419] STV(i): Video Mode set to CIF
Aug 14 22:51:20 workstation64 eth0: no IPv6 routers present
Aug 14 22:51:46 gconfd (andyrtr-6636): (Version 2.18.0.1) wird gestartet, Prozesskennung 6636, Benutzer »andyrtr«
Aug 14 22:51:46 gconfd (andyrtr-6636): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Aug 14 22:51:46 gconfd (andyrtr-6636): Die Adresse »xml:readwrite:/home/andyrtr/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst
Aug 14 22:51:46 gconfd (andyrtr-6636): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst
Aug 14 22:55:30 workstation64 ntpd[6355]: synchronized to 141.82.30.251, stratum 3
Aug 14 22:55:29 workstation64 ntpd[6355]: time reset -0.397675 s
Aug 14 22:55:29 workstation64 ntpd[6355]: kernel time sync status change 0001
Aug 14 22:56:09 workstation64 ntpd[6355]: Listening on interface #7 eth0, fe80::250:8dff:fe9f:9a05#123 Enabled
Aug 14 22:59:36 workstation64 ntpd[6355]: synchronized to 212.82.32.26, stratum 2
Aug 14 23:01:08 workstation64 syslog-ng[6304]: Log statistics; processed='center(queued)=2235', processed='center(received)=586', processed='destination(console)=0', processed='destination(mail)=7', processed='destination(user)=4', processed='destination(uucp)=0', processed='destination(messages)=497', processed='destination(news)=0', processed='destination(iptables)=0', processed='destination(everything)=583', processed='destination(lpr)=0', processed='destination(cron)=0', processed='destination(syslog)=1', processed='destination(authlog)=3', processed='destination(errors)=4', processed='destination(kernel)=521', processed='destination(daemon)=29', processed='destination(console_all)=586', processed='source(src)=586'
Aug 14 23:06:01 workstation64 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
Aug 14 23:06:01 workstation64 ata1.00: (BMDMA stat 0x26)
Aug 14 23:06:01 workstation64 ata1.00: cmd ca/00:08:91:0d:45/00:00:00:00:00/e4 tag 0 cdb 0x0 data 4096 out
Aug 14 23:06:01 workstation64 res 51/84:08:91:0d:45/00:00:00:00:00/e4 Emask 0x30 (host bus error)
Aug 14 23:06:01 workstation64 ata1: soft resetting port
Aug 14 23:06:01 workstation64 ata1.00: configured for UDMA/133
Aug 14 23:06:01 workstation64 ata1: EH complete
Aug 14 23:06:01 workstation64 sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
Aug 14 23:06:01 workstation64 sd 0:0:0:0: [sda] Write Protect is off
Aug 14 23:06:01 workstation64 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 14 23:06:01 workstation64 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 14 23:07:56 workstation64 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
Aug 14 23:07:56 workstation64 ata1.00: (BMDMA stat 0x26)
Aug 14 23:07:56 workstation64 ata1.00: cmd ca/00:08:78:6d:2f/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 out
Aug 14 23:07:56 workstation64 res 51/84:08:78:6d:2f/00:00:00:00:00/e8 Emask 0x30 (host bus error)
Aug 14 23:07:56 workstation64 ata1: soft resetting port
Aug 14 23:07:56 workstation64 ata1.00: configured for UDMA/133
Aug 14 23:07:56 workstation64 ata1: EH complete
Aug 14 23:07:56 workstation64 sd 0:0:0:0: [sda] 145226112 512-byte hardware sectors (74356 MB)
Aug 14 23:07:56 workstation64 sd 0:0:0:0: [sda] Write Protect is off
Aug 14 23:07:56 workstation64 sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 14 23:07:56 workstation64 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: sata drive loosing connection/resetting port
2007-08-15 13:48 ` Andreas Radke
@ 2007-08-16 10:53 ` Tejun Heo
2007-08-16 16:01 ` Andreas Radke
0 siblings, 1 reply; 7+ messages in thread
From: Tejun Heo @ 2007-08-16 10:53 UTC (permalink / raw)
To: Andreas Radke
Cc: linux-kernel, Michal Piotrowski, Jeff Garzik,
IDE/ATA development list
Andreas Radke wrote:
[on ahci]
> Aug 13 18:00:33 workstation64 ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400101 action 0x2 frozen
> Aug 13 18:00:33 workstation64 ata1.00: (irq_stat 0x08000000, interface fatal error)
> Aug 13 18:00:33 workstation64 ata1.00: cmd ca/00:08:a0:cb:07/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 out
> Aug 13 18:00:33 workstation64 res 50/00:00:bf:32:07/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)
Errors are very consistent. Data transfer from the host to the drive
fails and SError indicates Handshake Error, Non-recovered transient data
integrity error and often Recovered Data integrity error. For some
reason, your drive doesn't like what it's hearing from the controller
and replies with R_ERR.
[on ata_piix]
> Aug 14 23:06:01 workstation64 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
> Aug 14 23:06:01 workstation64 ata1.00: (BMDMA stat 0x26)
> Aug 14 23:06:01 workstation64 ata1.00: cmd ca/00:08:91:0d:45/00:00:00:00:00/e4 tag 0 cdb 0x0 data 4096 out
> Aug 14 23:06:01 workstation64 res 51/84:08:91:0d:45/00:00:00:00:00/e4 Emask 0x30 (host bus error)
As error reporting when using ata_piix is very limited. It gets
reported as host bus error but I think it's basically the same problem.
I don't think this is driver issue. I have the same controller and I've
never seen similar thing happening and I have plenty of drives and test
them often. Error reports also point to transmission problems. Your
drive just doesn't like what it's hearing. Does 'smartctl -a /dev/sda'
tell anything special?
--
tejun
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: sata drive loosing connection/resetting port
2007-08-16 10:53 ` Tejun Heo
@ 2007-08-16 16:01 ` Andreas Radke
0 siblings, 0 replies; 7+ messages in thread
From: Andreas Radke @ 2007-08-16 16:01 UTC (permalink / raw)
To: Tejun Heo
Cc: linux-kernel, Michal Piotrowski, Jeff Garzik,
IDE/ATA development list
Am Thu, 16 Aug 2007 19:53:35 +0900
schrieb Tejun Heo <htejun@gmail.com>:
> I don't think this is driver issue. I have the same controller and
> I've never seen similar thing happening and I have plenty of drives
> and test them often. Error reports also point to transmission
> problems. Your drive just doesn't like what it's hearing. Does
> 'smartctl -a /dev/sda' tell anything special?
[root@workstation64 andyrtr]# smartctl -a /dev/sda
smartctl version 5.37 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6
Bruce Allen Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Raptor family
Device Model: WDC WD740ADFD-00NLR1
Serial Number: WD-WMANS1463684
Firmware Version: 20.07P20
User Capacity: 74.355.769.344 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 published, ANSI INCITS 397-2005
Local Time is: Thu Aug 16 17:53:18 2007 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (2391) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 39) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 167 166 021 Pre-fail Always - 2650
4 Start_Stop_Count 0x0032 100 100 040 Old_age Always - 149
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000a 200 200 051 Old_age Always - 0
9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 5890
10 Spin_Retry_Count 0x0012 100 100 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 149
194 Temperature_Celsius 0x0022 111 104 000 Old_age Always - 32
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 2074
200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Conveyance offline Completed without error 00% 5855 -
# 2 Short offline Completed without error 00% 5854 -
# 3 Short offline Completed without error 00% 5826 -
# 4 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
i have already filed a support request to Western Digital. but i doubt they will know this certain issue
and won't have a fixed firmware for me.
in AHCI mode this error makes the system freeze completly after a few hours without further
log entries. in IDE mode it keeps working the bad way without making the system freeze.
anyway no more time to risk a broken filesystem. i'll change my setup. but if you have an
idea how to fix it or want me to test something just drop me a mail. thanks so far.
Andreas
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2007-08-16 16:01 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20070813220241.3f4b8df5@workstation64.home>
2007-08-13 20:11 ` sata drive loosing connection/resetting port Michal Piotrowski
2007-08-14 10:15 ` Tejun Heo
2007-08-14 20:19 ` Andreas Radke
2007-08-15 6:19 ` Tejun Heo
2007-08-15 13:48 ` Andreas Radke
2007-08-16 10:53 ` Tejun Heo
2007-08-16 16:01 ` Andreas Radke
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).