From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ethan Sommer Subject: booting from MD raid using libata Date: Wed, 15 Aug 2007 08:06:47 -0500 Message-ID: <46C2FA67.5060005@gac.edu> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------060308050507030202090008" Return-path: Received: from wraith.gac.edu ([138.236.128.65]:48185 "EHLO wraith.gac.edu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755830AbXHONgq (ORCPT ); Wed, 15 Aug 2007 09:36:46 -0400 Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Cc: htejun@gmail.com This is a multi-part message in MIME format. --------------060308050507030202090008 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit I've been trying to diagnose a problem we've been having for a few days and I think I've found the problem. (I'm hoping you might have the solution.) I have a system which has a intel 965 MB and a couple SIL based SATA cards one of which is hooked up to a few PMPs. If I try to boot the system normally after installing the libata-tj patch, it can't find the root partition because MD can't find any raid devices because the kernel hasn't detected the SATA partitions yet. If I turn the system drive to "legacy" mode in the kernel, then it detects the partitions on hda and hdc but not on sda-sdX, then it detects raid devices, then it detects the partitions on sda-sdX. So, I think the ordering of these steps is the problem. The system is unusably slow if I have the system disks in legacy mode. I've attached /var/log/dmesg. Ethan -- Ethan Sommer Systems Administrator Gustavus Adolphus College 507-933-7042 sommere@gustavus.edu --------------060308050507030202090008 Content-Type: text/plain; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg" Linux version 2.6.22.1-GAC2 (root@supertanker.gac.edu) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #5 SMP Tue Aug 14 18:34:12 CDT 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000008f000 (usable) BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cf599000 (usable) BIOS-e820: 00000000cf599000 - 00000000cf5a6000 (reserved) BIOS-e820: 00000000cf5a6000 - 00000000cf64e000 (usable) BIOS-e820: 00000000cf64e000 - 00000000cf6a6000 (ACPI NVS) BIOS-e820: 00000000cf6a6000 - 00000000cf6ab000 (ACPI data) BIOS-e820: 00000000cf6ab000 - 00000000cf6f2000 (ACPI NVS) BIOS-e820: 00000000cf6f2000 - 00000000cf6f3000 (usable) BIOS-e820: 00000000cf6f3000 - 00000000cf6ff000 (ACPI data) BIOS-e820: 00000000cf6ff000 - 00000000cf700000 (usable) BIOS-e820: 00000000cf700000 - 00000000d0000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000012c000000 (usable) 3904MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fe200 NX (Execute Disable) protection: active Entering add_active_range(0, 0, 1228800) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 1228800 early_node_map[1] active PFN ranges 0: 0 -> 1228800 On node 0 totalpages: 1228800 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 7808 pages used for memmap HighMem zone: 991616 pages, LIFO batch:31 DMI 2.4 present. Using APIC driver default ACPI: RSDP 000FE020, 0014 (r0 INTEL ) ACPI: RSDT CF6FD038, 004C (r1 INTEL DG965SS 697 1000013) ACPI: FACP CF6FC000, 0074 (r1 INTEL DG965SS 697 MSFT 1000013) ACPI: DSDT CF6F7000, 40ED (r1 INTEL DG965SS 697 MSFT 1000013) ACPI: FACS CF6AB000, 0040 ACPI: APIC CF6F6000, 0078 (r1 INTEL DG965SS 697 MSFT 1000013) ACPI: WDDT CF6F5000, 0040 (r1 INTEL DG965SS 697 MSFT 1000013) ACPI: MCFG CF6F4000, 003C (r1 INTEL DG965SS 697 MSFT 1000013) ACPI: ASF! CF6F3000, 00A6 (r32 INTEL DG965SS 697 MSFT 1000013) ACPI: SSDT CF6AA000, 01BC (r1 INTEL CpuPm 697 MSFT 1000013) ACPI: SSDT CF6A9000, 0175 (r1 INTEL Cpu0Ist 697 MSFT 1000013) ACPI: SSDT CF6A8000, 0175 (r1 INTEL Cpu1Ist 697 MSFT 1000013) ACPI: SSDT CF6A7000, 0175 (r1 INTEL Cpu2Ist 697 MSFT 1000013) ACPI: SSDT CF6A6000, 0175 (r1 INTEL Cpu3Ist 697 MSFT 1000013) ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at d4000000 (gap: d0000000:2ff00000) Built 1 zonelists. Total pages: 1219200 Kernel command line: ro root=/dev/md1 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07bf000 soft=c079f000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1864.908 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 4072372k/4915200k available (2379k kernel code, 45104k reserved, 1025k data, 260k init, 3201292k highmem) virtual kernel memory layout: fixmap : 0xffc56000 - 0xfffff000 (3748 kB) pkmap : 0xffa00000 - 0xffc00000 (2048 kB) vmalloc : 0xf8800000 - 0xff9fe000 ( 113 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0759000 - 0xc079a000 ( 260 kB) .data : 0xc0652e29 - 0xc0753384 (1025 kB) .text : 0xc0400000 - 0xc0652e29 (2379 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3731.20 BogoMIPS (lpj=1865601) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c07c0000 soft=c07a0000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3729.09 BogoMIPS (lpj=1864546) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06 Total of 2 processors activated (7460.29 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs migration_cost=54 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0500-053f claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved Time: tsc clocksource has been installed. pnp: 00:06: ioport range 0x500-0x53f has been reserved pnp: 00:06: ioport range 0x400-0x47f has been reserved pnp: 00:06: ioport range 0x680-0x6ff has been reserved PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: 3000-3fff MEM window: e0200000-e02fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: 2000-2fff MEM window: e0100000-e01fffff PREFETCH window: e0500000-e05fffff PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 1000-1fff MEM window: e0000000-e00fffff PREFETCH window: e0600000-e06fffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1c.3 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 1291k freed apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) audit(1187178454.720:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected an Intel 965G Chipset. agpgart: Detected 7676K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: WDC WD4000YR-01PLB0, ATA DISK drive Probing IDE interface ide1... hdc: WDC WD4000YR-01PLB0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 781422768 sectors (400088 MB) w/16384KiB Cache, CHS=48641/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 > hdc: max request size: 512KiB hdc: 781422768 sectors (400088 MB) w/16384KiB Cache, CHS=48641/255/63 hdc: cache flushes supported hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 hdc7 > ide-floppy driver 0.99.newide ata_piix 0000:00:1f.2: version 2.11 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Unable to reserve I/O region #1:8@1f0 for device 0000:00:1f.2 ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 0 (errno=-16) PCI: Unable to reserve I/O region #3:8@170 for device 0000:00:1f.2 ata_piix 0000:00:1f.2: failed to request/iomap BARs for port 1 (errno=-16) ata_piix 0000:00:1f.2: no available native port ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.5 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x00014428 ctl 0x0001444e bmdma 0x000140f0 irq 19 ata2: SATA max UDMA/133 cmd 0x00014420 ctl 0x0001444a bmdma 0x000140f8 irq 19 ata1.00: ATA-7: HDS724040KLSA80, KFAOA46A, max UDMA/133 ata1.00: 781422768 sectors, multi 16: LBA48 ata1.00: configured for UDMA/133 ata2.00: ATA-7: HDS724040KLSA80, KFAOA46A, max UDMA/133 ata2.00: 781422768 sectors, multi 16: LBA48 ata2.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA HDS724040KLSA80 KFAO PQ: 0 ANSI: 5 scsi 1:0:0:0: Direct-Access ATA HDS724040KLSA80 KFAO PQ: 0 ANSI: 5 sata_promise 0000:06:00.0: version 2.09 ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 21 (level, low) -> IRQ 20 scsi2 : sata_promise scsi3 : sata_promise scsi4 : sata_promise ata3: SATA max UDMA/133 cmd 0xf882a200 ctl 0xf882a238 bmdma 0x00000000 irq 20 ata4: SATA max UDMA/133 cmd 0xf882a280 ctl 0xf882a2b8 bmdma 0x00000000 irq 20 ata5: PATA max UDMA/133 cmd 0xf882a300 ctl 0xf882a338 bmdma 0x00000000 irq 20 ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATA-7: HDS724040KLSA80, KFAOA32A, max UDMA/133 ata3.00: 781422768 sectors, multi 0: LBA48 ata3.00: configured for UDMA/133 ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata4.00: ATA-7: HDS724040KLSA80, KFAOA32A, max UDMA/133 ata4.00: 781422768 sectors, multi 0: LBA48 ata4.00: configured for UDMA/133 ata5.00: ATAPI: PIONEER DVD-RW DVR-112D, 1.15, max UDMA/66 ata5.00: configured for UDMA/66 scsi 2:0:0:0: Direct-Access ATA HDS724040KLSA80 KFAO PQ: 0 ANSI: 5 scsi 3:0:0:0: Direct-Access ATA HDS724040KLSA80 KFAO PQ: 0 ANSI: 5 scsi 4:0:0:0: CD-ROM PIONEER DVD-RW DVR-112D 1.15 PQ: 0 ANSI: 5 sata_sil24 0000:04:00.0: version 1.0 ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:04:00.0 to 64 scsi5 : sata_sil24 scsi6 : sata_sil24 ata6: SATA max UDMA/100 cmd 0xf8830000 ctl 0x00000000 bmdma 0x00000000 irq 19 ata7: SATA max UDMA/100 cmd 0xf8832000 ctl 0x00000000 bmdma 0x00000000 irq 19 ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 0) ata6.00: ATA-7: HDS724040KLSA80, KFAOA46A, max UDMA/133 ata6.00: 781422768 sectors, multi 16: LBA48 ata6.00: configured for UDMA/100 ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 0) ata7.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 ata7.00: hard resetting link ata7.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata7.01: hard resetting link ata7.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata7.02: hard resetting link ata7.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata7.03: hard resetting link ata7.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata7.04: hard resetting link ata7.04: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata7.05: hard resetting link ata7.05: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata7.00: ATA-7: HDS724040KLSA80, KFAOA46A, max UDMA/133 ata7.00: 781422768 sectors, multi 16: LBA48 ata7.00: configured for UDMA/100 ata7.01: ATA-7: HDS724040KLSA80, KFAOA46A, max UDMA/133 ata7.01: 781422768 sectors, multi 0: LBA48 ata7.01: configured for UDMA/100 ata7.02: ATA-7: WDC WD4000YR-01PLB0, 01.06A01, max UDMA/133 ata7.02: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32) ata7.02: configured for UDMA/100 ata7.03: ATA-7: HDS724040KLSA80, KFAOA46A, max UDMA/133 ata7.03: 781422768 sectors, multi 0: LBA48 ata7.03: configured for UDMA/100 ata7.04: ATA-7: HDS724040KLSA80, KFAOA46A, max UDMA/133 ata7.04: 781422768 sectors, multi 0: LBA48 ata7.04: configured for UDMA/100 ata7: EH complete scsi 5:0:0:0: Direct-Access ATA HDS724040KLSA80 KFAO PQ: 0 ANSI: 5 scsi 6:0:0:0: Direct-Access ATA HDS724040KLSA80 KFAO PQ: 0 ANSI: 5 scsi 6:1:0:0: Direct-Access ATA HDS724040KLSA80 KFAO PQ: 0 ANSI: 5 scsi 6:2:0:0: Direct-Access ATA WDC WD4000YR-01P 01.0 PQ: 0 ANSI: 5 scsi 6:3:0:0: Direct-Access ATA HDS724040KLSA80 KFAO PQ: 0 ANSI: 5 scsi 6:4:0:0: Direct-Access ATA HDS724040KLSA80 KFAO PQ: 0 ANSI: 5 ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 22 (level, low) -> IRQ 21 scsi7 : sata_sil24 scsi8 : sata_sil24 scsi9 : sata_sil24 scsi10 : sata_sil24 ata8: SATA max UDMA/100 cmd 0xf8840000 ctl 0x00000000 bmdma 0x00000000 irq 21 ata9: SATA max UDMA/100 cmd 0xf8842000 ctl 0x00000000 bmdma 0x00000000 irq 21 ata10: SATA max UDMA/100 cmd 0xf8844000 ctl 0x00000000 bmdma 0x00000000 irq 21 ata11: SATA max UDMA/100 cmd 0xf8846000 ctl 0x00000000 bmdma 0x00000000 irq 21 ata8: SATA link down (SStatus 0 SControl 0) ata9: SATA link down (SStatus 0 SControl 0) ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 0) ata10.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9 ata10.00: hard resetting link ata10.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata10.01: hard resetting link ata10.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata10.02: hard resetting link ata10.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata10.03: hard resetting link ata10.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata10.04: hard resetting link ata10.04: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata10.05: hard resetting link ata10.05: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata10.00: ATA-7: HDS724040KLSA80, KFAOA32A, max UDMA/133 ata10.00: 781422768 sectors, multi 16: LBA48 ata10.00: configured for UDMA/100 ata10.01: ATA-7: HDS724040KLSA80, KFAOA32A, max UDMA/133 ata10.01: 781422768 sectors, multi 0: LBA48 ata10.01: configured for UDMA/100 ata10.02: ATA-7: HDS724040KLSA80, KFAOA46A, max UDMA/133 ata10.02: 781422768 sectors, multi 0: LBA48 ata10.02: configured for UDMA/100 ata10.03: ATA-7: HDS724040KLSA80, KFAOA46A, max UDMA/133 ata10.03: 781422768 sectors, multi 0: LBA48 ata10.03: configured for UDMA/100 ata10.04: ATA-7: HDS724040KLSA80, KFAOA32A, max UDMA/133 ata10.04: 781422768 sectors, multi 0: LBA48 ata10.04: configured for UDMA/100 ata10: EH complete ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 0) ata11.00: ATA-7: HDS724040KLSA80, KFAOA46A, max UDMA/133 ata11.00: 781422768 sectors, multi 16: LBA48 ata11.00: configured for UDMA/100 scsi 9:0:0:0: Direct-Access ATA HDS724040KLSA80 KFAO PQ: 0 ANSI: 5 scsi 9:1:0:0: Direct-Access ATA HDS724040KLSA80 KFAO PQ: 0 ANSI: 5 scsi 9:2:0:0: Direct-Access ATA HDS724040KLSA80 KFAO PQ: 0 ANSI: 5 scsi 9:3:0:0: Direct-Access ATA HDS724040KLSA80 KFAO PQ: 0 ANSI: 5 scsi 9:4:0:0: Direct-Access ATA HDS724040KLSA80 KFAO PQ: 0 ANSI: 5 scsi 10:0:0:0: Direct-Access ATA HDS724040KLSA80 KFAO PQ: 0 ANSI: 5 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP bic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI config is deprecated. Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead. speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI config is deprecated. Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead. Using IPI No-Shortcut mode Freeing unused kernel memory: 260k freed Write protecting the kernel read-only data: 756k input: AT Translated Set 2 keyboard as /class/input/input0 USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 17, io base 0x000040a0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 20, io base 0x00004080 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.0: irq 22, io base 0x00004060 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004020 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0425400 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 22, io mem 0xe0425000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 6 ports detected md: raid1 personality registered for level 1 md: Autodetecting RAID arrays. md: autorun ... md: considering hdc7 ... md: adding hdc7 ... md: hdc6 has different UUID to hdc7 md: hdc5 has different UUID to hdc7 md: hdc3 has different UUID to hdc7 md: hdc2 has different UUID to hdc7 md: hdc1 has different UUID to hdc7 md: adding hda7 ... md: hda6 has different UUID to hdc7 md: hda5 has different UUID to hdc7 md: hda3 has different UUID to hdc7 md: hda2 has different UUID to hdc7 md: hda1 has different UUID to hdc7 md: created md5 md: bind md: bind md: running: raid1: raid set md5 active with 2 out of 2 mirrors md: considering hdc6 ... md: adding hdc6 ... md: hdc5 has different UUID to hdc6 md: hdc3 has different UUID to hdc6 md: hdc2 has different UUID to hdc6 md: hdc1 has different UUID to hdc6 md: adding hda6 ... md: hda5 has different UUID to hdc6 md: hda3 has different UUID to hdc6 md: hda2 has different UUID to hdc6 md: hda1 has different UUID to hdc6 md: created md4 md: bind md: bind md: running: raid1: raid set md4 active with 2 out of 2 mirrors md: considering hdc5 ... md: adding hdc5 ... md: hdc3 has different UUID to hdc5 md: hdc2 has different UUID to hdc5 md: hdc1 has different UUID to hdc5 md: adding hda5 ... md: hda3 has different UUID to hdc5 md: hda2 has different UUID to hdc5 md: hda1 has different UUID to hdc5 md: created md3 md: bind md: bind md: running: raid1: raid set md3 active with 2 out of 2 mirrors md: considering hdc3 ... md: adding hdc3 ... md: hdc2 has different UUID to hdc3 md: hdc1 has different UUID to hdc3 md: adding hda3 ... md: hda2 has different UUID to hdc3 md: hda1 has different UUID to hdc3 md: created md2 md: bind md: bind md: running: raid1: raid set md2 active with 2 out of 2 mirrors md: considering hdc2 ... md: adding hdc2 ... md: hdc1 has different UUID to hdc2 md: adding hda2 ... md: hda1 has different UUID to hdc2 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: considering hdc1 ... md: adding hdc1 ... md: adding hda1 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1187178483.650:2): selinux=0 auid=4294967295 sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sd 0:0:0:0: [sda] Attached SCSI disk sd 1:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk sd 2:0:0:0: [sdc] 781422768 512-byte hardware sectors (400088 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 781422768 512-byte hardware sectors (400088 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sd 2:0:0:0: [sdc] Attached SCSI disk sd 3:0:0:0: [sdd] 781422768 512-byte hardware sectors (400088 MB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdd] 781422768 512-byte hardware sectors (400088 MB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: sdd1 sd 3:0:0:0: [sdd] Attached SCSI disk sd 5:0:0:0: [sde] 781422768 512-byte hardware sectors (400088 MB) sd 5:0:0:0: [sde] Write Protect is off sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:0:0: [sde] 781422768 512-byte hardware sectors (400088 MB) sd 5:0:0:0: [sde] Write Protect is off sd 5:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sde: sde1 sd 5:0:0:0: [sde] Attached SCSI disk sd 6:0:0:0: [sdf] 781422768 512-byte hardware sectors (400088 MB) sd 6:0:0:0: [sdf] Write Protect is off sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00 sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:0:0: [sdf] 781422768 512-byte hardware sectors (400088 MB) sd 6:0:0:0: [sdf] Write Protect is off sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00 sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdf: sdf1 sd 6:0:0:0: [sdf] Attached SCSI disk sd 6:1:0:0: [sdg] 781422768 512-byte hardware sectors (400088 MB) sd 6:1:0:0: [sdg] Write Protect is off sd 6:1:0:0: [sdg] Mode Sense: 00 3a 00 00 sd 6:1:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 6:1:0:0: [sdg] 781422768 512-byte hardware sectors (400088 MB) sd 6:1:0:0: [sdg] Write Protect is off sd 6:1:0:0: [sdg] Mode Sense: 00 3a 00 00 sd 6:1:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdg: sdg1 sd 6:1:0:0: [sdg] Attached SCSI disk sd 6:2:0:0: [sdh] 781422768 512-byte hardware sectors (400088 MB) sd 6:2:0:0: [sdh] Write Protect is off sd 6:2:0:0: [sdh] Mode Sense: 00 3a 00 00 sd 6:2:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 6:2:0:0: [sdh] 781422768 512-byte hardware sectors (400088 MB) sd 6:2:0:0: [sdh] Write Protect is off sd 6:2:0:0: [sdh] Mode Sense: 00 3a 00 00 sd 6:2:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdh: sdh1 sd 6:2:0:0: [sdh] Attached SCSI disk sd 6:3:0:0: [sdi] 781422768 512-byte hardware sectors (400088 MB) sd 6:3:0:0: [sdi] Write Protect is off sd 6:3:0:0: [sdi] Mode Sense: 00 3a 00 00 sd 6:3:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 6:3:0:0: [sdi] 781422768 512-byte hardware sectors (400088 MB) sd 6:3:0:0: [sdi] Write Protect is off sd 6:3:0:0: [sdi] Mode Sense: 00 3a 00 00 sd 6:3:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdi: sdi1 sd 6:3:0:0: [sdi] Attached SCSI disk sd 6:4:0:0: [sdj] 781422768 512-byte hardware sectors (400088 MB) sd 6:4:0:0: [sdj] Write Protect is off sd 6:4:0:0: [sdj] Mode Sense: 00 3a 00 00 sd 6:4:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 6:4:0:0: [sdj] 781422768 512-byte hardware sectors (400088 MB) sd 6:4:0:0: [sdj] Write Protect is off sd 6:4:0:0: [sdj] Mode Sense: 00 3a 00 00 sd 6:4:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdj: sdj1 sd 6:4:0:0: [sdj] Attached SCSI disk sd 9:0:0:0: [sdk] 781422768 512-byte hardware sectors (400088 MB) sd 9:0:0:0: [sdk] Write Protect is off sd 9:0:0:0: [sdk] Mode Sense: 00 3a 00 00 sd 9:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 9:0:0:0: [sdk] 781422768 512-byte hardware sectors (400088 MB) sd 9:0:0:0: [sdk] Write Protect is off sd 9:0:0:0: [sdk] Mode Sense: 00 3a 00 00 sd 9:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdk: sdk1 sd 9:0:0:0: [sdk] Attached SCSI disk sd 9:1:0:0: [sdl] 781422768 512-byte hardware sectors (400088 MB) sd 9:1:0:0: [sdl] Write Protect is off sd 9:1:0:0: [sdl] Mode Sense: 00 3a 00 00 sd 9:1:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 9:1:0:0: [sdl] 781422768 512-byte hardware sectors (400088 MB) sd 9:1:0:0: [sdl] Write Protect is off sd 9:1:0:0: [sdl] Mode Sense: 00 3a 00 00 sd 9:1:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdl: sdl1 sd 9:1:0:0: [sdl] Attached SCSI disk sd 9:2:0:0: [sdm] 781422768 512-byte hardware sectors (400088 MB) sd 9:2:0:0: [sdm] Write Protect is off sd 9:2:0:0: [sdm] Mode Sense: 00 3a 00 00 sd 9:2:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 9:2:0:0: [sdm] 781422768 512-byte hardware sectors (400088 MB) sd 9:2:0:0: [sdm] Write Protect is off sd 9:2:0:0: [sdm] Mode Sense: 00 3a 00 00 sd 9:2:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdm: sdm1 sd 9:2:0:0: [sdm] Attached SCSI disk sd 9:3:0:0: [sdn] 781422768 512-byte hardware sectors (400088 MB) sd 9:3:0:0: [sdn] Write Protect is off sd 9:3:0:0: [sdn] Mode Sense: 00 3a 00 00 sd 9:3:0:0: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 9:3:0:0: [sdn] 781422768 512-byte hardware sectors (400088 MB) sd 9:3:0:0: [sdn] Write Protect is off sd 9:3:0:0: [sdn] Mode Sense: 00 3a 00 00 sd 9:3:0:0: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdn: sdn1 sd 9:3:0:0: [sdn] Attached SCSI disk sd 9:4:0:0: [sdo] 781422768 512-byte hardware sectors (400088 MB) sd 9:4:0:0: [sdo] Write Protect is off sd 9:4:0:0: [sdo] Mode Sense: 00 3a 00 00 sd 9:4:0:0: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 9:4:0:0: [sdo] 781422768 512-byte hardware sectors (400088 MB) sd 9:4:0:0: [sdo] Write Protect is off sd 9:4:0:0: [sdo] Mode Sense: 00 3a 00 00 sd 9:4:0:0: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdo: sdo1 sd 9:4:0:0: [sdo] Attached SCSI disk sd 10:0:0:0: [sdp] 781422768 512-byte hardware sectors (400088 MB) sd 10:0:0:0: [sdp] Write Protect is off sd 10:0:0:0: [sdp] Mode Sense: 00 3a 00 00 sd 10:0:0:0: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 10:0:0:0: [sdp] 781422768 512-byte hardware sectors (400088 MB) sd 10:0:0:0: [sdp] Write Protect is off sd 10:0:0:0: [sdp] Mode Sense: 00 3a 00 00 sd 10:0:0:0: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdp: sdp1 sd 10:0:0:0: [sdp] Attached SCSI disk sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 parport_pc 00:08: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:00.0 to 64 scsi11 : pata_marvell scsi12 : pata_marvell ata12: PATA max UDMA/100 cmd 0x00013018 ctl 0x00013026 bmdma 0x00013000 irq 16 ata13: DUMMY BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 21 (level, low) -> IRQ 20 Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:19.0 to 64 e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:76:be:b9:65 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 3:0:0:0: Attached scsi generic sg3 type 0 sr 4:0:0:0: Attached scsi generic sg4 type 5 sd 5:0:0:0: Attached scsi generic sg5 type 0 sd 6:0:0:0: Attached scsi generic sg6 type 0 sd 6:1:0:0: Attached scsi generic sg7 type 0 sd 6:2:0:0: Attached scsi generic sg8 type 0 sd 6:3:0:0: Attached scsi generic sg9 type 0 sd 6:4:0:0: Attached scsi generic sg10 type 0 sd 9:0:0:0: Attached scsi generic sg11 type 0 sd 9:1:0:0: Attached scsi generic sg12 type 0 sd 9:2:0:0: Attached scsi generic sg13 type 0 sd 9:3:0:0: Attached scsi generic sg14 type 0 sd 9:4:0:0: Attached scsi generic sg15 type 0 sd 10:0:0:0: Attached scsi generic sg16 type 0 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1b.0 to 64 lp0: using parport0 (interrupt-driven). lp0: console ready input: Power Button (FF) as /class/input/input1 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input2 ACPI: Sleep Button (CM) [SLPB] md: Autodetecting RAID arrays. md: autorun ... md: considering sdp1 ... md: adding sdp1 ... md: adding sdo1 ... md: adding sdn1 ... md: adding sdm1 ... md: adding sdl1 ... md: adding sdk1 ... md: adding sdj1 ... md: adding sdi1 ... md: adding sdh1 ... md: adding sdg1 ... md: adding sdf1 ... md: adding sde1 ... md: adding sdd1 ... md: adding sdc1 ... md: adding sdb1 ... md: adding sda1 ... md: created md10 md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: running: raid5: automatically using best checksumming function: pIII_sse pIII_sse : 28.000 MB/sec raid5: using function: pIII_sse (28.000 MB/sec) raid6: int32x1 3 MB/s raid6: int32x2 3 MB/s raid6: int32x4 3 MB/s raid6: int32x8 3 MB/s raid6: mmxx1 7 MB/s raid6: mmxx2 7 MB/s raid6: sse1x1 7 MB/s raid6: sse1x2 7 MB/s raid6: sse2x1 11 MB/s raid6: sse2x2 11 MB/s raid6: using algorithm sse2x1 (11 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: device sdp1 operational as raid disk 9 raid5: device sdo1 operational as raid disk 8 raid5: device sdn1 operational as raid disk 7 raid5: device sdm1 operational as raid disk 6 raid5: device sdl1 operational as raid disk 5 raid5: device sdk1 operational as raid disk 4 raid5: device sdj1 operational as raid disk 13 raid5: device sdi1 operational as raid disk 12 raid5: device sdh1 operational as raid disk 11 raid5: device sdg1 operational as raid disk 10 raid5: device sdf1 operational as raid disk 15 raid5: device sde1 operational as raid disk 14 raid5: device sdd1 operational as raid disk 2 raid5: device sdc1 operational as raid disk 3 raid5: device sdb1 operational as raid disk 1 raid5: device sda1 operational as raid disk 0 raid5: allocated 16696kB for md10 raid5: raid level 6 set md10 active with 16 out of 16 devices, algorithm 2 RAID5 conf printout: --- rd:16 wd:16 disk 0, o:1, dev:sda1 disk 1, o:1, dev:sdb1 disk 2, o:1, dev:sdd1 disk 3, o:1, dev:sdc1 disk 4, o:1, dev:sdk1 disk 5, o:1, dev:sdl1 disk 6, o:1, dev:sdm1 disk 7, o:1, dev:sdn1 disk 8, o:1, dev:sdo1 disk 9, o:1, dev:sdp1 disk 10, o:1, dev:sdg1 disk 11, o:1, dev:sdh1 disk 12, o:1, dev:sdi1 disk 13, o:1, dev:sdj1 disk 14, o:1, dev:sde1 disk 15, o:1, dev:sdf1 md: ... autorun DONE. device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com EXT3 FS on md1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on md5, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1052152k swap on /dev/md4. Priority:-1 extents:1 across:1052152k --------------060308050507030202090008--