From mboxrd@z Thu Jan 1 00:00:00 1970 From: Brad Campbell Subject: Re: Still having problems with sata_promise on all late kernels - shutdown too - BISECTED Date: Wed, 15 Aug 2007 20:18:07 +0400 Message-ID: <46C3273F.1070306@wasp.net.au> References: <46C11BBE.6010802@wasp.net.au> <46C1316F.4010906@wasp.net.au> <46C1DB92.7080806@wasp.net.au> <46C2B046.7060708@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from wasp.net.au ([203.190.192.17]:47372 "EHLO wasp.net.au" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757834AbXHOQSS (ORCPT ); Wed, 15 Aug 2007 12:18:18 -0400 In-Reply-To: <46C2B046.7060708@gmail.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Tejun Heo Cc: linux-ide@vger.kernel.org Tejun Heo wrote: > Brad Campbell wrote: >> Brad Campbell wrote: >> >>> http://www.fnarfbargle.com/CIMG1029.JPG (I have posted this screen >>> shot previously. It's still doing exactly the same thing on both boxes). >>> >> git-bisect shows up this commit as the guilty party. I can't just revert >> it on a recent tree though. >> Will investigate further. > > Weird. Does 'hdparm -y /dev/sdX' work? Very interesting indeed.. for i in /dev/sd* ; do echo $i ; hdparm -y $i ; done sda-sdh worked fine.. sdi locked the box. So it's dying on the 3rd or 4th controller. Now that I think about it, on the other side of the git bisect I probably only heard 8 clicks as the kernel shut down the 1st 8 drives, then the remainder powered off when the machine powered off. So even prior to this it was probably only shutting down the 1st 8 drives properly. brad@storage1:~$ lspci 00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 00:09.0 Ethernet controller: 3Com Corporation 3c940 10/100/1000Base-T [Marvell] (rev 12) 00:0b.0 Mass storage controller: Promise Technology, Inc. PDC20318 (SATA150 TX4) (rev 02) 00:0d.0 Mass storage controller: Promise Technology, Inc. PDC20318 (SATA150 TX4) (rev 02) 00:0e.0 Mass storage controller: Promise Technology, Inc. PDC20318 (SATA150 TX4) (rev 02) 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60) 00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80) 00:13.0 Mass storage controller: Promise Technology, Inc. PDC20318 (SATA150 TX4) (rev 02) 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 315PRO PCI/AGP VGA Display Adapter [ 46.624922] sata_promise 0000:00:0b.0: version 2.07 [ 46.624937] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 17 [ 46.641073] scsi0 : sata_promise [ 46.641301] scsi1 : sata_promise [ 46.641471] scsi2 : sata_promise [ 46.648281] scsi3 : sata_promise [ 46.654924] ata1: SATA max UDMA/133 cmd 0xf8816200 ctl 0xf8816238 bmdma 0x00000000 irq 0 [ 46.661784] ata2: SATA max UDMA/133 cmd 0xf8816280 ctl 0xf88162b8 bmdma 0x00000000 irq 0 [ 46.668432] ata3: SATA max UDMA/133 cmd 0xf8816300 ctl 0xf8816338 bmdma 0x00000000 irq 0 [ 46.674895] ata4: SATA max UDMA/133 cmd 0xf8816380 ctl 0xf88163b8 bmdma 0x00000000 irq 0 [ 47.170019] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 47.190471] ata1.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 47.197090] ata1.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133 [ 47.203704] ata1.00: 490234752 sectors, multi 0: LBA48 [ 47.230410] ata1.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 47.237100] ata1.00: configured for UDMA/133 [ 47.729427] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 47.749866] ata2.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 47.756760] ata2.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133 [ 47.763727] ata2.00: 490234752 sectors, multi 0: LBA48 [ 47.789820] ata2.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 47.796966] ata2.00: configured for UDMA/133 [ 48.288835] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 48.309277] ata3.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 48.316381] ata3.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133 [ 48.323494] ata3.00: 490234752 sectors, multi 0: LBA48 [ 48.349233] ata3.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 48.356411] ata3.00: configured for UDMA/133 [ 48.848245] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 48.868684] ata4.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 48.875960] ata4.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133 [ 48.883230] ata4.00: 490234752 sectors, multi 0: LBA48 [ 48.908634] ata4.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 48.916000] ata4.00: configured for UDMA/133 [ 48.923402] scsi 0:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 [ 48.931040] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB) [ 48.938540] sd 0:0:0:0: [sda] Write Protect is off [ 48.945849] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 48.945865] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 48.953425] sd 0:0:0:0: [sda] 490234752 512-byte hardware sectors (251000 MB) [ 48.960907] sd 0:0:0:0: [sda] Write Protect is off [ 48.968251] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 48.968265] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 48.975808] sda: unknown partition table [ 55.984630] sd 0:0:0:0: [sda] Attached SCSI disk [ 55.992218] scsi 1:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 [ 55.999870] sd 1:0:0:0: [sdb] 490234752 512-byte hardware sectors (251000 MB) [ 56.007421] sd 1:0:0:0: [sdb] Write Protect is off [ 56.015029] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 56.015045] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 56.023013] sd 1:0:0:0: [sdb] 490234752 512-byte hardware sectors (251000 MB) [ 56.031098] sd 1:0:0:0: [sdb] Write Protect is off [ 56.039005] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 56.039019] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 56.047244] sdb: unknown partition table [ 63.431266] sd 1:0:0:0: [sdb] Attached SCSI disk [ 63.439764] scsi 2:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 [ 63.448337] sd 2:0:0:0: [sdc] 490234752 512-byte hardware sectors (251000 MB) [ 63.456799] sd 2:0:0:0: [sdc] Write Protect is off [ 63.465117] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 63.465133] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 63.473672] sd 2:0:0:0: [sdc] 490234752 512-byte hardware sectors (251000 MB) [ 63.482133] sd 2:0:0:0: [sdc] Write Protect is off [ 63.490472] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 63.490486] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 63.498998] sdc: unknown partition table [ 70.770909] sd 2:0:0:0: [sdc] Attached SCSI disk [ 70.779326] scsi 3:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 [ 70.787888] sd 3:0:0:0: [sdd] 490234752 512-byte hardware sectors (251000 MB) [ 70.796358] sd 3:0:0:0: [sdd] Write Protect is off [ 70.804686] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 70.804700] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 70.813235] sd 3:0:0:0: [sdd] 490234752 512-byte hardware sectors (251000 MB) [ 70.821679] sd 3:0:0:0: [sdd] Write Protect is off [ 70.829976] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 70.829991] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 70.838476] sdd: unknown partition table [ 78.098488] sd 3:0:0:0: [sdd] Attached SCSI disk [ 78.106864] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 18 [ 78.127345] scsi4 : sata_promise [ 78.135687] scsi5 : sata_promise [ 78.143830] scsi6 : sata_promise [ 78.151848] scsi7 : sata_promise [ 78.159669] ata5: SATA max UDMA/133 cmd 0xf881e200 ctl 0xf881e238 bmdma 0x00000000 irq 0 [ 78.167664] ata6: SATA max UDMA/133 cmd 0xf881e280 ctl 0xf881e2b8 bmdma 0x00000000 irq 0 [ 78.175472] ata7: SATA max UDMA/133 cmd 0xf881e300 ctl 0xf881e338 bmdma 0x00000000 irq 0 [ 78.183099] ata8: SATA max UDMA/133 cmd 0xf881e380 ctl 0xf881e3b8 bmdma 0x00000000 irq 0 [ 78.676722] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 78.697172] ata5.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 78.704683] ata5.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133 [ 78.712191] ata5.00: 490234752 sectors, multi 0: LBA48 [ 78.737112] ata5.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 78.744592] ata5.00: configured for UDMA/133 [ 79.236129] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 79.256570] ata6.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 79.264101] ata6.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133 [ 79.271619] ata6.00: 490234752 sectors, multi 0: LBA48 [ 79.296521] ata6.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 79.304040] ata6.00: configured for UDMA/133 [ 79.795538] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 79.815978] ata7.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 79.823495] ata7.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133 [ 79.831032] ata7.00: 490234752 sectors, multi 0: LBA48 [ 79.855930] ata7.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 79.863472] ata7.00: configured for UDMA/133 [ 80.354946] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 80.375384] ata8.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 80.382952] ata8.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133 [ 80.390513] ata8.00: 490234752 sectors, multi 0: LBA48 [ 80.415342] ata8.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 80.422877] ata8.00: configured for UDMA/133 [ 80.430470] scsi 4:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 [ 80.438232] sd 4:0:0:0: [sde] 490234752 512-byte hardware sectors (251000 MB) [ 80.445848] sd 4:0:0:0: [sde] Write Protect is off [ 80.453366] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 80.453383] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 80.461109] sd 4:0:0:0: [sde] 490234752 512-byte hardware sectors (251000 MB) [ 80.468723] sd 4:0:0:0: [sde] Write Protect is off [ 80.476237] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 80.476252] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 80.483922] sde: unknown partition table [ 87.806745] sd 4:0:0:0: [sde] Attached SCSI disk [ 87.814366] scsi 5:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 [ 87.822071] sd 5:0:0:0: [sdf] 490234752 512-byte hardware sectors (251000 MB) [ 87.829682] sd 5:0:0:0: [sdf] Write Protect is off [ 87.837329] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 87.837344] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 87.845348] sd 5:0:0:0: [sdf] 490234752 512-byte hardware sectors (251000 MB) [ 87.853458] sd 5:0:0:0: [sdf] Write Protect is off [ 87.861397] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 87.861412] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 87.869672] sdf: unknown partition table [ 95.284548] sd 5:0:0:0: [sdf] Attached SCSI disk [ 95.293075] scsi 6:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 [ 95.301680] sd 6:0:0:0: [sdg] 490234752 512-byte hardware sectors (251000 MB) [ 95.310178] sd 6:0:0:0: [sdg] Write Protect is off [ 95.318525] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 95.318539] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 95.327110] sd 6:0:0:0: [sdg] 490234752 512-byte hardware sectors (251000 MB) [ 95.335614] sd 6:0:0:0: [sdg] Write Protect is off [ 95.343981] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00 [ 95.343995] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 95.352533] sdg: unknown partition table [ 102.740714] sd 6:0:0:0: [sdg] Attached SCSI disk [ 102.749171] scsi 7:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 [ 102.757758] sd 7:0:0:0: [sdh] 490234752 512-byte hardware sectors (251000 MB) [ 102.766256] sd 7:0:0:0: [sdh] Write Protect is off [ 102.774610] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 102.774626] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 102.783186] sd 7:0:0:0: [sdh] 490234752 512-byte hardware sectors (251000 MB) [ 102.791650] sd 7:0:0:0: [sdh] Write Protect is off [ 102.799970] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00 [ 102.799984] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 102.808492] sdh: unknown partition table [ 110.116127] sd 7:0:0:0: [sdh] Attached SCSI disk [ 110.124553] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 17 (level, low) -> IRQ 19 [ 110.143509] scsi8 : sata_promise [ 110.151883] scsi9 : sata_promise [ 110.160052] scsi10 : sata_promise [ 110.168136] scsi11 : sata_promise [ 110.176031] ata9: SATA max UDMA/133 cmd 0xf8820200 ctl 0xf8820238 bmdma 0x00000000 irq 0 [ 110.184099] ata10: SATA max UDMA/133 cmd 0xf8820280 ctl 0xf88202b8 bmdma 0x00000000 irq 0 [ 110.192172] ata11: SATA max UDMA/133 cmd 0xf8820300 ctl 0xf8820338 bmdma 0x00000000 irq 0 [ 110.200062] ata12: SATA max UDMA/133 cmd 0xf8820380 ctl 0xf88203b8 bmdma 0x00000000 irq 0 [ 110.692889] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 110.713389] ata9.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 110.721175] ata9.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133 [ 110.728956] ata9.00: 490234752 sectors, multi 0: LBA48 [ 110.753329] ata9.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 110.761077] ata9.00: configured for UDMA/133 [ 111.252296] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 111.272785] ata10.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 111.280580] ata10.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133 [ 111.288370] ata10.00: 490234752 sectors, multi 0: LBA48 [ 111.312741] ata10.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 111.320533] ata10.00: configured for UDMA/133 [ 111.811705] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 111.832188] ata11.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 111.839981] ata11.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133 [ 111.847786] ata11.00: 490234752 sectors, multi 0: LBA48 [ 111.872156] ata11.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 111.879951] ata11.00: configured for UDMA/133 [ 112.371114] ata12: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 112.391607] ata12.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 112.399417] ata12.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133 [ 112.407218] ata12.00: 490234752 sectors, multi 0: LBA48 [ 112.431552] ata12.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 112.439320] ata12.00: configured for UDMA/133 [ 112.447134] scsi 8:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 [ 112.455125] sd 8:0:0:0: [sdi] 490234752 512-byte hardware sectors (251000 MB) [ 112.462964] sd 8:0:0:0: [sdi] Write Protect is off [ 112.470702] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 112.470717] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 112.478673] sd 8:0:0:0: [sdi] 490234752 512-byte hardware sectors (251000 MB) [ 112.486513] sd 8:0:0:0: [sdi] Write Protect is off [ 112.494254] sd 8:0:0:0: [sdi] Mode Sense: 00 3a 00 00 [ 112.494268] sd 8:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 112.502167] sdi: unknown partition table [ 112.529588] sd 8:0:0:0: [sdi] Attached SCSI disk [ 112.537413] scsi 9:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 [ 112.545323] sd 9:0:0:0: [sdj] 490234752 512-byte hardware sectors (251000 MB) [ 112.553145] sd 9:0:0:0: [sdj] Write Protect is off [ 112.561007] sd 9:0:0:0: [sdj] Mode Sense: 00 3a 00 00 [ 112.561021] sd 9:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 112.569190] sd 9:0:0:0: [sdj] 490234752 512-byte hardware sectors (251000 MB) [ 112.577468] sd 9:0:0:0: [sdj] Write Protect is off [ 112.585577] sd 9:0:0:0: [sdj] Mode Sense: 00 3a 00 00 [ 112.585591] sd 9:0:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 112.593829] sdj: unknown partition table [ 112.617892] sd 9:0:0:0: [sdj] Attached SCSI disk [ 112.626370] scsi 10:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 [ 112.634936] sd 10:0:0:0: [sdk] 490234752 512-byte hardware sectors (251000 MB) [ 112.643405] sd 10:0:0:0: [sdk] Write Protect is off [ 112.651729] sd 10:0:0:0: [sdk] Mode Sense: 00 3a 00 00 [ 112.651744] sd 10:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 112.660296] sd 10:0:0:0: [sdk] 490234752 512-byte hardware sectors (251000 MB) [ 112.668776] sd 10:0:0:0: [sdk] Write Protect is off [ 112.677116] sd 10:0:0:0: [sdk] Mode Sense: 00 3a 00 00 [ 112.677136] sd 10:0:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 112.685648] sdk: unknown partition table [ 112.717384] sd 10:0:0:0: [sdk] Attached SCSI disk [ 112.725810] scsi 11:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 [ 112.734392] sd 11:0:0:0: [sdl] 490234752 512-byte hardware sectors (251000 MB) [ 112.742893] sd 11:0:0:0: [sdl] Write Protect is off [ 112.751255] sd 11:0:0:0: [sdl] Mode Sense: 00 3a 00 00 [ 112.751269] sd 11:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 112.759834] sd 11:0:0:0: [sdl] 490234752 512-byte hardware sectors (251000 MB) [ 112.768308] sd 11:0:0:0: [sdl] Write Protect is off [ 112.776644] sd 11:0:0:0: [sdl] Mode Sense: 00 3a 00 00 [ 112.776657] sd 11:0:0:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 112.785186] sdl: unknown partition table [ 112.815809] sd 11:0:0:0: [sdl] Attached SCSI disk [ 112.824267] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 16 [ 112.850639] scsi12 : sata_promise [ 112.859064] scsi13 : sata_promise [ 112.867290] scsi14 : sata_promise [ 112.875389] scsi15 : sata_promise [ 112.883301] ata13: SATA max UDMA/133 cmd 0xf8822200 ctl 0xf8822238 bmdma 0x00000000 irq 0 [ 112.891386] ata14: SATA max UDMA/133 cmd 0xf8822280 ctl 0xf88222b8 bmdma 0x00000000 irq 0 [ 112.899281] ata15: SATA max UDMA/133 cmd 0xf8822300 ctl 0xf8822338 bmdma 0x00000000 irq 0 [ 112.906993] ata16: SATA max UDMA/133 cmd 0xf8822380 ctl 0xf88223b8 bmdma 0x00000000 irq 0 [ 113.400028] ata13: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 113.420538] ata13.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 113.428125] ata13.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133 [ 113.435704] ata13.00: 490234752 sectors, multi 0: LBA48 [ 113.460465] ata13.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 113.468012] ata13.00: configured for UDMA/133 [ 113.959436] ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 113.979922] ata14.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 113.987525] ata14.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133 [ 113.995118] ata14.00: 490234752 sectors, multi 0: LBA48 [ 114.019875] ata14.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 114.027476] ata14.00: configured for UDMA/133 [ 114.518843] ata15: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 114.539331] ata15.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 114.546918] ata15.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133 [ 114.554531] ata15.00: 490234752 sectors, multi 0: LBA48 [ 114.579302] ata15.00: ata_hpa_resize 1: sectors = 490234752, hpa_sectors = 490234752 [ 114.586895] ata15.00: configured for UDMA/133 [ 114.918403] ata16: SATA link down (SStatus 0 SControl 0) [ 114.926018] scsi 12:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 [ 114.933755] sd 12:0:0:0: [sdm] 490234752 512-byte hardware sectors (251000 MB) [ 114.941420] sd 12:0:0:0: [sdm] Write Protect is off [ 114.948955] sd 12:0:0:0: [sdm] Mode Sense: 00 3a 00 00 [ 114.948971] sd 12:0:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 114.956622] sd 12:0:0:0: [sdm] 490234752 512-byte hardware sectors (251000 MB) [ 114.964258] sd 12:0:0:0: [sdm] Write Protect is off [ 114.971763] sd 12:0:0:0: [sdm] Mode Sense: 00 3a 00 00 [ 114.971777] sd 12:0:0:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 114.979404] sdm: unknown partition table [ 115.004878] sd 12:0:0:0: [sdm] Attached SCSI disk [ 115.012514] scsi 13:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 [ 115.020224] sd 13:0:0:0: [sdn] 490234752 512-byte hardware sectors (251000 MB) [ 115.027883] sd 13:0:0:0: [sdn] Write Protect is off [ 115.035414] sd 13:0:0:0: [sdn] Mode Sense: 00 3a 00 00 [ 115.035430] sd 13:0:0:0: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 115.043070] sd 13:0:0:0: [sdn] 490234752 512-byte hardware sectors (251000 MB) [ 115.050705] sd 13:0:0:0: [sdn] Write Protect is off [ 115.058187] sd 13:0:0:0: [sdn] Mode Sense: 00 3a 00 00 [ 115.058200] sd 13:0:0:0: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 115.065817] sdn: unknown partition table [ 115.092809] sd 13:0:0:0: [sdn] Attached SCSI disk [ 115.100723] scsi 14:0:0:0: Direct-Access ATA Maxtor 7Y250M0 YAR5 PQ: 0 ANSI: 5 [ 115.108931] sd 14:0:0:0: [sdo] 490234752 512-byte hardware sectors (251000 MB) [ 115.117005] sd 14:0:0:0: [sdo] Write Protect is off [ 115.125124] sd 14:0:0:0: [sdo] Mode Sense: 00 3a 00 00 [ 115.125139] sd 14:0:0:0: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 115.133606] sd 14:0:0:0: [sdo] 490234752 512-byte hardware sectors (251000 MB) [ 115.142171] sd 14:0:0:0: [sdo] Write Protect is off [ 115.150580] sd 14:0:0:0: [sdo] Mode Sense: 00 3a 00 00 [ 115.150595] sd 14:0:0:0: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 115.159136] sdo: unknown partition table [ 115.185583] sd 14:0:0:0: [sdo] Attached SCSI disk [ 115.194181] pata_via 0000:00:0f.1: version 0.3.1 [ 115.194253] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 20 [ 115.202806] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 115.211316] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 Brad -- "Human beings, who are almost unique in having the ability to learn from the experience of others, are also remarkable for their apparent disinclination to do so." -- Douglas Adams