From: Neil Romig <neil@romig.demon.co.uk>
To: linux-ide@vger.kernel.org
Subject: File corruption in 2.6.18 thru 2.6.22
Date: Sat, 18 Aug 2007 14:42:45 +0000 [thread overview]
Message-ID: <46C70565.1040308@romig.demon.co.uk> (raw)
I have been upgrading my kernel from 2.6.14 to get at the new wireless
stuff, but have hit a big problem.
When copying files, I get random (?) corruption, which is preventing me
from using my linux system (Linux From Scratch) as it affects compiling
as well (assembler complains about garbage in files).
Some examples:
cp ../Changelog-2.6.18 .
diff Changelog-2.6.18 ../Changelog-2.6.18
16377c16377
< LD .top_vmlinux1
---
> LD .tmp_vmlinux1
23954c23954
< Date: Mon Jul 1% 04:45:11 2006 -0700
---
> Date: Mon Jul 10 04:45:11 2006 -0700
24955c24955
< This is generally useful, but partacularly helps see if it is the same sector
---
> This is generally useful, but particularly helps see if it is the same sector
31879c31879
< [MMC] sdhci: version bump cdhci
---
> [MMC] sdhci: version bump sdhci
42955c42955
< Replace `he temp makefile hacks with proper CONFIG entries, which are also
---
> Replace the temp makefile hacks with proper CONFIG entries, which are also
49050c49050
< and this task is(already holding:
---
> and this task is already holding:
[output clipped]
Everything is O.K using kernel 2.6.17.14, but 2.6.18 and beyond all have
this problem. It may take me months to sort this out on my own - any
suggestions?
My setup:
00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS645DX Host & Memory & AGP Controller (rev 01)
Subsystem: CLEVO/KAPOK Computer: Unknown device 0403
Flags: bus master, medium devsel, latency 64
Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 00009000-00009fff
Memory behind bridge: ec100000-ec1fffff
Prefetchable memory behind bridge: f0000000-f7ffffff
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 14)
Flags: bus master, medium devsel, latency 0
00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
Flags: medium devsel
I/O ports at 8100 [size=32]
00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller (prog-if 10 [OHCI])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0403
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at ec000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at 34000000 [disabled] [size=128K]
Capabilities: [64] Power Management version 2
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE](prog-if 80 [Master])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0403
Flags: bus master, medium devsel, latency 128, IRQ 11
I/O ports at 1000 [size=16]
00:02.6 Modem: Silicon Integrated Systems [SiS] Intel 537 [56k Winmodem] (rev a0) (prog-if 00 [Generic])
Subsystem: CLEVO/KAPOK Computer: Unknown device 4201
Flags: medium devsel, IRQ 5
I/O ports at 1400 [disabled] [size=256]
I/O ports at 1080 [disabled] [size=128]
Capabilities: [48] Power Management version 2
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 PCI Audio Accelerator (rev a0)
Subsystem: CLEVO/KAPOK Computer: Unknown device 0403
Flags: bus master, medium devsel, latency 173, IRQ 5
I/O ports at 1c00 [size=256]
I/O ports at 1800 [size=128]
Capabilities: [48] Power Management version 2
00:03.0 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f) (prog-if 10 [OHCI])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0403
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at ec001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
00:03.1 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f) (prog-if 10 [OHCI])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0403
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at ec002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
00:03.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 0f) (prog-if 10 [OHCI])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0403
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at ec003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
00:03.3 USB Controller: Silicon Integrated Systems [SiS] SiS7002 USB 2.0 (prog-if 20 [EHCI])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0403
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at ec004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: CLEVO/KAPOK Computer: Unknown device 0400
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at 2000 [size=256]
Memory at ec005000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
00:0c.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller
Subsystem: CLEVO/KAPOK Computer: Unknown device 0403
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at 34020000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 30000000-31fff000 (prefetchable)
Memory window 1: 32000000-33fff000 (prefetchable)
I/O window 0: 00002400-000024ff
I/O window 1: 00002800-000028ff
16-bit legacy interface ports at 0001
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000] (rev 01) (prog-if 00 [VGA])
Subsystem: CLEVO/KAPOK Computer: Unknown device 0403
Flags: bus master, stepping, fast Back2Back, 66Mhz, medium devsel, latency 66, IRQ 11
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at 9000 [size=256]
Memory at ec100000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at ec120000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
ver_linux gives:
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux romig 2.6.18.1 #1 Wed Aug 15 21:12:48 BST 2007 i686 pentium4 i386
GNU/Linux
Gnu C 3.4.3
Gnu make 3.80
binutils 2.15.94.0.2.2
util-linux 2.12q
mount 2.12q
module-init-tools 3.1
e2fsprogs 1.37
PPP 2.4.3
Linux C Library 2.3.4
Dynamic linker (ldd) 2.3.4
Linux C++ Library 6.0.3
Kbd 1.12
Sh-utils 5.2.1
udev 113
Modules Loaded
next reply other threads:[~2007-08-18 14:50 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-18 14:42 Neil Romig [this message]
2007-08-23 0:16 ` File corruption in 2.6.18 thru 2.6.22 Dave Jones
2007-08-23 20:12 ` Neil Romig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46C70565.1040308@romig.demon.co.uk \
--to=neil@romig.demon.co.uk \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).