From: Maciek Rutecki <maciej.rutecki@gmail.com>
To: Linux-kernel <linux-kernel@vger.kernel.org>,
htejun@gmail.com, linux-ide@vger.kernel.org,
linux-acpi@vger.kernel.org, rjw@sisk.pl
Subject: SATA error while resume
Date: Sun, 19 Aug 2007 11:12:57 +0200 [thread overview]
Message-ID: <46C80999.1060700@gmail.com> (raw)
Kernel: 2.6.23-rc2 witch patches [1], but older and stable versions also
affected.
[1] http://www.ussg.iu.edu/hypermail/linux/kernel/0708.0/2655.html
+ipw3945 and truecrypt.
Sometimes (one in ten, or rarely) I have this error while system resume
from suspend to disk:
=================
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Loading image data pages (117687 pages)
... \b\b\b\b 0%\b\b\b\b 1%\b\b\b\b 2%\b\b\b\b 3%\b\b\b\b 4%\b\b\b\b 5%\b\b\b\b 6%\b\b\b\b 7%\b\b\b\b
8%\b\b\b\b 9%\b\b\b\b 10%\b\b\b\b 11%\b\b\b\b 12%\b\b\b\b 13%\b\b\b\b 14%\b\b\b\b 15%\b\b\b\b 16%\b\b\b\b 17%\b\b\b\b
18%\b\b\b\b 19%\b\b\b\b 20%<3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0
action 0x0
ata1.00: irq_stat 0x40000001
ata1.00: cmd 25/00:00:10:0b:f3/00:04:05:00:00/e0 tag 0 cdb 0x0 data
524288 in
res 51/40:a4:6c:0b:f3/00:03:05:00:00/e0 Emask 0x9 (media error)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000001
ata1.00: cmd 25/00:00:10:0b:f3/00:04:05:00:00/e0 tag 0 cdb 0x0 data
524288 in
res 51/40:a4:6c:0b:f3/00:03:05:00:00/e0 Emask 0x9 (media error)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000001
ata1.00: cmd 25/00:00:10:0b:f3/00:04:05:00:00/e0 tag 0 cdb 0x0 data
524288 in
res 51/40:a4:6c:0b:f3/00:03:05:00:00/e0 Emask 0x9 (media error)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000001
ata1.00: cmd 25/00:00:10:0b:f3/00:04:05:00:00/e0 tag 0 cdb 0x0 data
524288 in
res 51/40:a4:6c:0b:f3/00:03:05:00:00/e0 Emask 0x9 (media error)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000001
ata1.00: cmd 25/00:00:10:0b:f3/00:04:05:00:00/e0 tag 0 cdb 0x0 data
524288 in
res 51/40:a4:6c:0b:f3/00:03:05:00:00/e0 Emask 0x9 (media error)
ata1.00: configured for UDMA/100
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000001
ata1.00: cmd 25/00:00:10:0b:f3/00:04:05:00:00/e0 tag 0 cdb 0x0 data
524288 in
res 51/40:a4:6c:0b:f3/00:03:05:00:00/e0 Emask 0x9 (media error)
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
05 f3 0b 6c
sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate
failed
end_request: I/O error, dev sda, sector 99814252
Read-error on swap-device (8:0:99814256)
Read-error on swap-device (8:0:99814264)
Read-error on swap-device (8:0:99814272)
...
Read-error on swap-device (8:0:99815184)
ata1: EH complete
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
Read 470748 kbytes in 30.97 seconds (15.20 MB/s)
PM: Restore failed, recovering.
Restarting tasks ... done.
swsusp: Basic memory bitmaps freed
=================
Then system continue booting without resume.
I use smartctl and check disk 2 times and run fsck/mkswap -c and I have
no erros:
=================
rutek:/home/maciek/kernel.org/libata_error# smartctl -A /dev/sda
smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always
- 28879
2 Throughput_Performance 0x0005 100 100 030 Pre-fail
Offline - 20381999
3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always
- 1
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always
- 1599
5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always
- 8589934592000
7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always
- 3713
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail
Offline - 0
9 Power_On_Seconds 0x0032 096 096 000 Old_age Always
- 0h+41m+39s
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 1354
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 65
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always
- 2776
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always
- 33 (Lifetime Min/Max 15/46)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always
- 344
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 444268544
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 1
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail Always
- 22830
203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always
- 2632796799455
240 Head_Flying_Hours 0x003e 200 200 000 Old_age Always
- 0
=================
Dmesg and config:
http://www.unixy.pl/maciek/download/kernel/libata_error/
Regards
--
Maciej Rutecki
http://www.maciek.unixy.pl
next reply other threads:[~2007-08-19 9:13 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-19 9:12 Maciek Rutecki [this message]
2007-08-19 10:45 ` SATA error while resume Tejun Heo
2007-08-19 14:25 ` Mark Lord
2007-08-19 15:16 ` Maciek Rutecki
2007-08-19 15:49 ` Tejun Heo
2007-08-19 16:25 ` Maciek Rutecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46C80999.1060700@gmail.com \
--to=maciej.rutecki@gmail.com \
--cc=htejun@gmail.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rjw@sisk.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).